Meso-substituted porphyrins for dye-sensitized solar cells

Activation of Strong Boron-Fluorine and Silicon-Fluorine σ-Bonds: Theoretical Understanding and Prediction

The oxidative addition of BF3 to a platinum(0) bis(phosphine) complex [Pt(PMe3)2] (1) was investigated by density functional calculations. Both the cis and trans pathways for the oxidative addition of BF3 to 1 are endergonic (ΔG°=26.8 and 35.7 kcal mol(-1), respectively) and require large Gibbs activation energies (ΔG°(≠)=56.3 and 38.9 kcal mol(-1), respectively). A second borane plays crucial roles in accelerating the activation; the trans oxidative addition of BF3 to 1 in the presence of a second BF3 molecule occurs with ΔG°(≠) and ΔG° values of 10.1 and -4.7 kcal mol(-1), respectively. ΔG°(≠) becomes very small and ΔG° becomes negative. A charge transfer (CT), F→BF3, occurs from the dissociating fluoride to the second non-coordinated BF3. This CT interaction stabilizes both the transition state and the product. The B-F σ-bond cleavage of BF2Ar(F) (Ar(F)=3,5-bis(trifluoromethyl)phenyl) and the B-Cl σ-bond cleavage of BCl3 by 1 are accelerated by the participation of the second borane. The calculations predict that trans oxidative addition of SiF4 to 1 easily occurs in the presence of a second SiF4 molecule via the formation of a hypervalent Si species.

Molecular engineering of organic dyes with a hole-extending donor tail for efficient all-solid-state dye-sensitized solar cells

We report a new concept for the design of metal-free organic dyes (OD5-OD9) with an extended donor-π-acceptor (D-π-A) molecular framework, in which the donor terminal unit is attached by a hole-extending side chain to retard back electron transfer and charge recombination; the π-bridge component contains varied thiophene-based substituents to enhance the light-harvesting ability of the device. The best dye (OD9) has a D-A-π-A configuration with the hexyloxyphenylthiophene (HPT) side chain as a hole-extension component and a benzothiadiazole (BTD) internal acceptor as a π-extension component. The co-sensitization of OD9 with the new porphyrin dye LW24 enhanced the light-harvesting ability to 800 nm; thus, a power conversion efficiency 5.5 % was achieved. Photoinduced absorption (PIA) and transient absorption spectral (TAS) techniques were applied to account for the observed trend of the open-circuit voltage (VOC ) of the devices. This work provides insights into the molecular design, photovoltaic performance, and kinetics of charge recombination.

Correlations between Photovoltaic Characteristics, Adsorption Number, and Regeneration Kinetics in Dye-Sensitized Solar Cells Revealed by Scanning Photocurrent Microscopy

Newly developed simultaneous scanning photocurrent and luminescence microscopy was applied to ruthenium-based dye-sensitized solar cells (DSCs) comprising a cover glass photoanode with a 100 nm thick TiO2 layer. Using this, we have investigated the lateral variations of several parameters of these DSCs under short-circuit conditions. Simultaneous measurement of photocurrent and luminescence images for the same area of the DSC demonstrated submicrometric lateral resolution of our photocurrent microscopy, which is approximately 10 times better than the resolution of photocurrent microscopy used in past studies. The photovoltaic parameters, such as short-circuit current density, open-circuit voltage, and charge-collection efficiency, were thus evaluated for local (or submicrometric) regions of the DSCs. Furthermore, the photocurrent saturation behavior of the DSCs was examined as a function of the excitation rate and analyzed on the basis of a three-state kinetic model. This protocol allowed for quantification of the dye-adsorption number and dye-regeneration rate constant for any local area of the DSCs. Consequently, the correlations between the dye adsorption number, photovoltaic parameters, and regeneration rate constant, which are difficult to address through examination of the entire cell, were revealed by the "zoom-in" approach utilizing this high-resolution photocurrent microscopy.

Unusual near-white electroluminescence of light emitting diodes based on saddle-shaped porphyrins

In contrast to the red electroluminescence emission frequently observed in porphyrins based OLED devices, the present devices exhibit a nearly white emission with greenish yellow, yellowish green and blue green hues in the case of Fe(II)(TCPPBr6) (TCPPBr6 = β-hexabromo-meso-tetrakis-(4-phenyl carboxyl) porphyrinato), Zn(II)(TPPBr6) and Co(II)(TPPBr6), respectively.

New generation solar cells: concepts, trends and perspectives

Organic, dye-sensitized and perovskite solar cell technologies have triggered widespread interest in recent years due to their very promising potential towards a high solar electricity future. A number of important milestones have marked the roadmap of each sector on the way to today's outstanding performances, but there still remains plenty of scope for further improvement. The most influential landmarks, together with basic concepts and future perspectives, are unraveled in this review.

Theoretical study of acene-bridged dyes for dye-sensitized solar cells

The electronic structures and absorption spectra for a series of acene-based organic dyes and the adsorption energy and optical properties for these dyes adsorbed on (TiO2)38 have been investigated using density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods. The effects of acene units and different substitution positions of electron donors on the optoelectronic properties of the acene-modified dyes are demonstrated. The photophysical properties of tetracene- and pentacene-based dyes are found to be tuned by changing the size of acene and the substitution position of the donor. The donor sites have a significant influence on the absorption wavelength mainly because of different molecular orbital (MO) contributions of the highest occupied molecular orbital (HOMO) on the bridging acene units, and the increasing MO contribution would lead to the red shift in the absorption spectra. Meanwhile, the donor is located close to the center of the π-conjugated bridge, and the absorption spectra are extended. The adsorption energy and optical properties of tetracene- and pentacene-based dyes adsorbed on (TiO2)38 suggest that acene-bridged dyes could be adsorbed on the TiO2 surface and inject electrons into semiconductors effectively. Then the results obtained from the hexacene-based dyes confirm the conclusions proposed from the tetracene- and pentence-based dyes. This study will provide a useful reference to the future design and optimization of acene dyes for dye-sensitized solar cell applications.

Rigid triarylamine donor–π–acceptor porphyrin dyes and their application in dye-sensitized solar cells

Three donor–π–acceptor porphyrin dyes bearing the rigid 5-phenyl-carbazole, 5-phenyl-iminodibenzyl and 5-phenyl-iminostilbene donor groups were synthesized and their performance evaluated in TiO₂ based dye-sensitized solar cells.

Push–pull porphyrins with different anchoring group orientations for fully printable monolithic dye-sensitized solar cells with mesoscopic carbon counter electrodes

Compared with WH-C4 and WH-C1, WH-C6- and WH-C7-sensitized devices show a significantly reduced V_oc, J_sc and power conversion efficiency (η).

Synthesis and photophysical properties of β-triazole bridged porphyrin–coumarin dyads

Novel β-triazole bridged porphyrin–coumarin dyads are synthesized via a Cu(i)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction and evaluated for their photophysical properties.

Hexaethylsubporphyrins: β-alkyl analogues in the subporphyrin family

Two new subporphyrins were synthesized for the first time from a β-substituted pyrrole i.e. 3,4-diethylpyrrole via pyridine-tri-N-(3,4-diethylpyrrolyl)borane as building blocks.

A supramolecular assembling of zinc porphyrin with a π-conjugated oligo(phenylenevinylene) (oPPV) molecular wire for dye sensitized solar cell

A novel π-conjugated oligo(phenylenevinylene) (oPPV) (or LC) was prepared, as a new organic dye for dye-sensitized solar cells (DSSC), which contains a cyanoacrylic acid group on one end and a pyridyl group on the other.

Structure and energy level alignment at the dye–electrode interface in p-type DSSCs: new hints on the role of anchoring modes from ab initio calculations

The thermodynamic driving force for hole injection in p-DSSCs is maximized by the dye anchoring modes that minimize electrode surface distortions.

The effect of porphyrins suspended with different electronegative moieties on the photovoltaic performance of monolithic porphyrin-sensitized solar cells with carbon counter electrodes

Compared with WH-C3 and WH-C4, the WH-C5-sensitized device shows a significantly enhanced V_oc, J_sc and power conversion efficiency (η).

Mono- and tri-β-substituted unsymmetrical metalloporphyrins: synthesis, structural, spectral and electrochemical properties

Mono-/tri-β-substituted metalloporphyrins have been synthesized and characterized. Dramatic reduction in the HOMO–LUMO gap with tunable electronic, spectral and electrochemical redox potentials were observed as the number of electron withdrawing groups increased.

Synthesis, spectroscopic, electrochemical redox, solvatochromism and anion binding properties of β-tetra- and -octaphenylethynyl substituted meso-tetraphenylporphyrins

β-Phenylethynyl (PE) porphyrins exhibited unique photophysical properties and solvatochromic behavior due to ICT from the porphyrin core to PE moieties. Further, Zn(ii) porphyrins were utilized for anion sensing.

Electron deficient nonplanar β-octachlorovanadylporphyrin as a highly efficient and selective epoxidation catalyst for olefins

Highly electron deficient and nonplanar β-octachlorovanadylporphyrin (VOTPPCl₈) was synthesized and utilized for selective epoxidation of olefins with very high TOF numbers (6566-9650 h⁻¹).

Porphyrin chemodosimeters: synthesis, electrochemical redox properties and selective ‘naked-eye’ detection of cyanide ions

β-Dicyanovinyl substituted porphyrins have been synthesized and utilized as chemodosimeters for ratiometric and colorimetric sensing of cyanide ions in CH₃CN and H₂O/CH₃CN mixture.

Zinc phthalocyanine sensitizer having double carboxylic acid anchoring groups for dye-sensitized solar cells with cobalt(ii/iii)-based redox electrolyte

Double anchored ZnPc sensitizer PcS25 exhibited higher conversion efficiency in dye-sensitized solar cells with cobalt(ii/iii)-based redox electrolyte than single-anchored ZnPc sensitizers.

Saddle-shaped porphyrins for dye-sensitized solar cells: new insight into the relationship between nonplanarity and photovoltaic properties

We report on the theoretical and experimental studies of the new dye-sensitized solar cells functionalized with 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin zinc(ii) complexes bearing 2- and 8-bromo substituents at the β positions.

Click made porphyrin–corrole dyad: a system for photo-induced charge separation

The preparation of the first porphyrin–corrole dyad through click chemistry is described.

The effect of different alkyl chains on the photovoltaic performance of D–π–A porphyrin-sensitized solar cells

Compared to the DSSCs based on WH-C1 and YD20 with short alkyl chains, the device sensitized by WH-C2 with the hexyloxy group shows a significantly enhanced V_oc, J_sc and power conversion efficiency (η).

Effects of heterocycles containing different atoms as π-bridges on the performance of dye-sensitized solar cells

The thiophene π-bridge shows a better performance compared with the furan π-bridge in DSSCs.

Can silicon substituted metal-free organic dyes achieve better efficiency compared to silicon free organic dyes? A computational study

DFT and TD-DFT calculations performed using metal free organic dyes containing silicon substituted silole units and/or donor systems exhibit significantly improved optical properties compared to their corresponding silicon free dyes.

Optical Absorption and Electron Injection of 4-(Cyanomethyl)benzoic Acid Based Dyes: A DFT Study

Density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations were carried out to study the ground state geometries, electronic structures, and absorption spectra of 4-(cyanomethyl)benzoic acid based dyes (AG1 and AG2) used for dye-sensitized solar cells (DSSCs). The excited states properties and the thermodynamical parameters of electron injection were studied. The results showed that (a) two dyes have uncoplanar structures along the donor unit and conjugated bridge space, (b) two sensitizers exhibited intense absorption in the UV-Vis region, and (c) the excited state oxidation potential was higher than the conduction band edge of TiO2photoanode. As a result, a solar cell based on the 4-(cyanomethyl)benzoic acid based dyes exhibited well photovoltaic performance. Furthermore, nine dyes were designed on the basis of AG1 and AG2 to improve optical response and electron injection.

Non-aggregated Zn(ii)octa(2,6-diphenylphenoxy) phthalocyanine as a hole transporting material for efficient perovskite solar cells

A non-aggregated Zn(ii)octa(2,6-diphenylphenoxy) phthalocyanine (coded as TT80) has been used as a hole-transporting material for perovskite solar cells.