Use of metal oxide nanoparticle band gap to develop a predictive paradigm for oxidative stress and acute pulmonary inflammation

Implementation of a multidisciplinary approach to solve complex nano EHS problems by the UC Center for the Environmental Implications of Nanotechnology

UC CEIN was established with funding from the US National Science Foundation and the US Environmental Protection Agency in 2008 with the mission to study the impact of nanotechnology on the environment, including the identification of hazard and exposure scenarios that take into consideration the unique physicochemical properties of engineered nanomaterials (ENMs). Since its inception, the Center has made great progress in assembling a multidisciplinary team to develop the scientific underpinnings, research, knowledge acquisition, education and outreach that is required for assessing the safe implementation of nanotechnology in the environment. In this essay, the development of the infrastructure, protocols, and decision-making tools that are required to effectively integrate complementary scientific disciplines allowing knowledge gathering in a complex study area that goes beyond the traditional safety and risk assessment protocols of the 20th century is outlined. UC CEIN's streamlined approach, premised on predictive hazard and exposure assessment methods, high-throughput discovery platforms and environmental decision-making tools that consider a wide range of nano/bio interfaces in terrestrial and aquatic ecosystems, demonstrates the implementation of a 21st-century approach to the safe implementation of nanotechnology in the environment.

Mapping the biological oxidative damage of engineered nanomaterials

Novel engineered nanomaterials (ENMs) are being introduced into the market rapidly with little understanding of their potential toxicity. Each ENM is a complex combination of diverse sizes, surface chemistries, crystallinity, and metal impurities. Variability in physicochemical properties is poorly understood but is critically important in revealing adverse effects of ENMs. A need also exists for discovering broad relationships between variations in these physicochemical parameters and toxicological endpoints of interest. Biological oxidative damage (BOD) has been recognized as a key mechanism of nanotoxicity. An assortment of 138 ENMs representing major classes are evaluated for BOD elicited (net decrease in the antioxidant capacity of ENM-exposed human blood serum, as compare to unexposed serum) using the 'Ferric Reducing Ability of Serum' (FRAS) assay. This robust and high-throughput approach has the ability to determine the co-effects which multiple physicochemical characteristics impart on oxidative potential, and subsequently to identify and quantify the influence of individual factors. FRAS BOD approach demonstrated the potential for preliminary evaluation of potential toxicity of ENMs, mapping the within- and between-class variability of ENMs, ranking the potential toxicity by material class, and prioritizing the ENMs for further toxicity evaluation and risk assessment.

PEGylated hybrid ytterbia nanoparticles as high-performance diagnostic probes for in vivo magnetic resonance and X-ray computed tomography imaging with low systemic toxicity

Novel nanoparticulate contrast agents with low systemic toxicity and inexpensive character have exhibited more advantages over routinely used small molecular contrast agents for the diagnosis and prognosis of disease. Herein, we designed and synthesized PEGylated hybrid ytterbia nanoparticles as high-performance nanoprobes for X-ray computed tomography (CT) imaging and magnetic resonance (MR) imaging both in vitro and in vivo. These well-defined nanoparticles were facile to prepare and cost-effective, meeting the criteria as a biomedical material. Compared with routinely used Iobitridol in clinic, our PEG-Yb2O3:Gd nanoparticles could provide much significantly enhanced contrast upon various clinical voltages ranging from 80 kVp to 140 kVp owing to the high atomic number and well-positioned K-edge energy of ytterbium. By the doping of gadolinium, our nanoparticulate contrast agent could perform perfect MR imaging simultaneously, revealing similar organ enrichment and bio-distribution with the CT imaging results. The super improvement in imaging efficiency was mainly attributed to the high content of Yb and Gd in a single nanoparticle, thus making these nanoparticles suitable for dual-modal diagnostic imaging with a low single-injection dose. In addition, detailed toxicological study in vitro and in vivo indicated that uniformly sized PEG-Yb2O3:Gd nanoparticles possessed excellent biocompatibility and revealed overall safety.

Cytotoxicity of aluminium oxide nanoparticles towards fresh water algal isolate at low exposure concentrations

The growing commercial applications had brought aluminium oxide nanoparticles under toxicologists' purview. In the present study, the cytotoxicity of two different sized aluminium oxide nanoparticles (ANP(1), mean hydrodynamic diameter 82.6±22nm and ANP(2), mean hydrodynamic diameter 246.9±39nm) towards freshwater algal isolate Chlorella ellipsoids at low exposure levels (≤1μg/mL) using sterile lake water as the test medium was assessed. The dissolution of alumina nanoparticles and consequent contribution towards toxicity remained largely unexplored owing to its presumed insoluble nature. Herein, the leached Al(3+) ion mediated toxicity has been studied along with direct particulate toxicity to bring out the dynamics of toxicity through colloidal stability, biochemical, spectroscopic and microscopic analyses. The mean hydrodynamic diameter increased with time both for ANP(1) [82.6±22nm (0h) to 246.3±59nm (24h), to 1204±140nm (72h)] and ANP(2) [246.9±39nm (0h) to 368.28±48nm (24h), to 1225.96±186nm (72h)] signifying decreased relative abundance of submicron sized particles (<1000nm). The detailed cytotoxicity assays showed a significant reduction in the viability dependent on dose and exposure. A significant increase in ROS and LDH levels were noted for both ANPs at 1μg/mL concentration. The zeta potential and FT-IR analyses suggested surface chemical interaction between nanoparticles and algal cells. The substantial morphological changes and cell wall damage were confirmed through microscopic analyses (SEM, TEM, and CLSM). At 72h, significant Al(3+) ion release in the test medium [0.092μg/mL for ANP(1), and 0.19μg/mL for ANP(2)] was noted, and the resulting suspension containing leached ions caused significant cytotoxicity, revealing a substantial ionic contribution. This study indicates that both the nano-size and ionic dissolution play a significant role in the cytotoxicity of ANPs towards freshwater algae, and the exposure period largely determines the prevalent mode of nano-toxicity.

ONE Nano: NIEHS's strategic initiative on the health and safety effects of engineered nanomaterials

BACKGROUND

The past decade has seen tremendous expansion in the production and application of engineered nanomaterials (ENMs). The unique properties that make ENMs useful in the marketplace also make their interactions with biological systems difficult to anticipate and critically important to explore. Currently, little is known about the health effects of human exposure to these materials.

OBJECTIVES

As part of its role in supporting the National Nanotechnology Initiative, the National Institute of Environmental Health Sciences (NIEHS) has developed an integrated, strategic research program-"ONE Nano"-to increase our fundamental understanding of how ENMs interact with living systems, to develop predictive models for quantifying ENM exposure and assessing ENM health impacts, and to guide the design of second-generation ENMs to minimize adverse health effects.

DISCUSSION

The NIEHS's research investments in ENM health and safety include extramural grants and grantee consortia, intramural research activities, and toxicological studies being conducted by the National Toxicology Program (NTP). These efforts have enhanced collaboration within the nanotechnology research community and produced toxicological profiles for selected ENMs, as well as improved methods and protocols for conducting in vitro and in vivo studies to assess ENM health effects.

CONCLUSION

By drawing upon the strengths of the NIEHS's intramural, extramural, and NTP programs and establishing productive partnerships with other institutes and agencies across the federal government, the NIEHS's strategic ONE Nano program is working toward new advances to improve our understanding of the health impacts of engineered nanomaterials and support the goals of the National Nanotechnology Initiative.

Surface charge and cellular processing of covalently functionalized multiwall carbon nanotubes determine pulmonary toxicity

Functionalized carbon nanotubes (f-CNTs) are being produced in increased volume because of the ease of dispersion and maintenance of the pristine material physicochemical properties when used in composite materials as well as for other commercial applications. However, the potential adverse effects of f-CNTs have not been quantitatively or systematically explored. In this study, we used a library of covalently functionalized multiwall carbon nanotubes (f-MWCNTs), established from the same starting material, to assess the impact of surface charge in a predictive toxicological model that relates the tubes' pro-inflammatory and pro-fibrogenic effects at cellular level to the development of pulmonary fibrosis. Carboxylate (COOH), polyethylene glycol (PEG), amine (NH2), sidewall amine (sw-NH2), and polyetherimide (PEI)-modified MWCNTs were successfully established from raw or as-prepared (AP-) MWCNTs and comprehensively characterized by TEM, XPS, FTIR, and DLS to obtain information about morphology, length, degree of functionalization, hydrodynamic size, and surface charge. Cellular screening in BEAS-2B and THP-1 cells showed that, compared to AP-MWCNTs, anionic functionalization (COOH and PEG) decreased the production of pro-fibrogenic cytokines and growth factors (including IL-1β, TGF-β1, and PDGF-AA), while neutral and weak cationic functionalization (NH2 and sw-NH2) showed intermediary effects. In contrast, the strongly cationic PEI-functionalized tubes induced robust biological effects. These differences could be attributed to differences in cellular uptake and NLRP3 inflammasome activation, which depends on the propensity toward lysosomal damage and cathepsin B release in macrophages. Moreover, the in vitro hazard ranking was validated by the pro-fibrogenic potential of the tubes in vivo. Compared to pristine MWCNTs, strong cationic PEI-MWCNTs induced significant lung fibrosis, while carboxylation significantly decreased the extent of pulmonary fibrosis. These results demonstrate that surface charge plays an important role in the structure-activity relationships that determine the pro-fibrogenic potential of f-CNTs in the lung.

Nanomaterial toxicity testing in the 21st century: use of a predictive toxicological approach and high-throughput screening

The production of engineered nanomaterials (ENMs) is a scientific breakthrough in material design and the development of new consumer products. While the successful implementation of nanotechnology is important for the growth of the global economy, we also need to consider the possible environmental health and safety (EHS) impact as a result of the novel physicochemical properties that could generate hazardous biological outcomes. In order to assess ENM hazard, reliable and reproducible screening approaches are needed to test the basic materials as well as nanoenabled products. A platform is required to investigate the potentially endless number of biophysicochemical interactions at the nano/bio interface, in response to which we have developed a predictive toxicological approach. We define a predictive toxicological approach as the use of mechanisms-based high-throughput screening in vitro to make predictions about the physicochemical properties of ENMs that may lead to the generation of pathology or disease outcomes in vivo. The in vivo results are used to validate and improve the in vitro high-throughput screening (HTS) and to establish structure-activity relationships (SARs) that allow hazard ranking and modeling by an appropriate combination of in vitro and in vivo testing. This notion is in agreement with the landmark 2007 report from the US National Academy of Sciences, "Toxicity Testing in the 21st Century: A Vision and a Strategy" (http://www.nap.edu/catalog.php?record_id=11970), which advocates increased efficiency of toxicity testing by transitioning from qualitative, descriptive animal testing to quantitative, mechanistic, and pathway-based toxicity testing in human cells or cell lines using high-throughput approaches. Accordingly, we have implemented HTS approaches to screen compositional and combinatorial ENM libraries to develop hazard ranking and structure-activity relationships that can be used for predicting in vivo injury outcomes. This predictive approach allows the bulk of the screening analysis and high-volume data generation to be carried out in vitro, following which limited, but critical, validation studies are carried out in animals or whole organisms. Risk reduction in the exposed human or environmental populations can then focus on limiting or avoiding exposures that trigger these toxicological responses as well as implementing safer design of potentially hazardous ENMs. In this Account, we review the tools required for establishing predictive toxicology paradigms to assess inhalation and environmental toxicological scenarios through the use of compositional and combinatorial ENM libraries, mechanism-based HTS assays, hazard ranking, and development of nano-SARs. We will discuss the major injury paradigms that have emerged based on specific ENM properties, as well as describing the safer design of ZnO nanoparticles based on characterization of dissolution chemistry as a major predictor of toxicity.

Codelivery of an optimal drug/siRNA combination using mesoporous silica nanoparticles to overcome drug resistance in breast cancer in vitro and in vivo

We used a multifunctional mesoporous silica nanoparticle (MSNP) carrier to overcome doxorubicin (Dox) resistance in a multidrug resistant (MDR) human breast cancer xenograft by codelivering Dox and siRNA that targets the P-glycoprotein (Pgp) drug exporter. The Pgp siRNA selection from among a series of drug resistance targets was achieved by performing high throughput screening in a MDR breast cancer cell line, MCF-7/MDR. Following the establishment of a MCF-7/MDR xenograft model in nude mice, we demonstrated that a 50 nm MSNP, functionalized by a polyethyleneimine-polyethylene glycol (PEI-PEG) copolymer, provides protected delivery of stably bound Dox and Pgp siRNA to the tumor site. The effective biodistribution and reduced reticuloendothelial uptake, as a result of our nanocarrier design, allowed us to achieve an 8% enhanced permeability and retention effect at the tumor site. Compared to free Dox or the carrier loaded with either drug or siRNA alone, the dual delivery system resulted in synergistic inhibition of tumor growth in vivo. Analysis of multiple xenograft biopsies demonstrated significant Pgp knockdown at heterogeneous tumor sites that correspond to the regions where Dox was released intracellularly and induced apoptosis. We emphasize that the heterogeneity originates in the tumor microenvironment, which influences the vascular access, rather than heterogeneous Pgp expression in the MDR cells. Taken together, these data provide proof-of-principle testing of the use of a dual drug/siRNA nanocarrier to overcome Dox resistance in a xenograft. The study also provides the first detailed analysis of the impact of heterogeneity in the tumor microenvironment on the efficacy of siRNA delivery in vivo.

Effects of dominant material properties on the stability and transport of TiO2 nanoparticles and carbon nanotubes in aquatic environments: from synthesis to fate

Recently, increasing studies have focused on the environmental stability, transport, and fate of the anthropogenic nanomaterials in the environment, which contributes to the understanding of the potential risks when released. However, applying nanomaterials from different manufacturers and production methods tends to result in inconsistent experimental data and potentially a biased comparison. The aim of this review is to investigate the dominant material properties that determine the aggregation and deposition behavior of nanomaterials. Herein, we focus on two of the most popular anthropogenic nanomaterials, i.e., titanium dioxide (TiO2) and carbon nanotubes (CNTs). We start from the production methods of nanomaterials of different sources, and then examine their influence on the material properties and surface characteristics. The role of the material properties was carefully analyzed and correlated with the stability and transport in aquatic environments. These two case studies may be extended to other nanomaterials with similar surface properties, which will improve our understanding of the impact and risks of anthropogenic nanomaterials in the environment. This study highlights opportunities to design and produce "green" nanomaterials with less environmental risk and no sacrificing of the novel "nano" properties.

Genome-wide assessment in Escherichia coli reveals time-dependent nanotoxicity paradigms

The use of engineered nanomaterials (eNM) in consumer and industrial products is increasing exponentially. Our ability to rapidly assess their potential effects on human and environmental health is limited by our understanding of nanomediated toxicity. High-throughput screening (HTS) enables the investigation of nanomediated toxicity on a genome-wide level, thus uncovering their novel mechanisms and paradigms. Herein, we investigate the toxicity of zinc-containing nanomaterials (Zn-eNMs) using a time-resolved HTS methodology in an arrayed Escherichia coli genome-wide knockout (KO) library. The library was screened against nanoscale zerovalent zinc (nZn), nanoscale zinc oxide (nZnO), and zinc chloride (ZnCl(2)) salt as reference. Through sequential screening over 24 h, our method identified 173 sensitive clones from diverse biological pathways, which fell into two general groups: early and late responders. The overlap between these groups was small. Our results suggest that bacterial toxicity mechanisms change from pathways related to general metabolic function, transport, signaling, and metal ion homeostasis to membrane synthesis pathways over time. While all zinc sources shared pathways relating to membrane damage and metal ion homeostasis, Zn-eNMs and ZnCl(2) displayed differences in their sensitivity profiles. For example, ZnCl(2) and nZnO elicited unique responses in pathways related to two-component signaling and monosaccharide biosynthesis, respectively. Single isolated measurements, such as MIC or IC(50), are inadequate, and time-resolved approaches utilizing genome-wide assays are therefore needed to capture this crucial dimension and illuminate the dynamic interplay at the nano-bio interface.

Processing pathway dependence of amorphous silica nanoparticle toxicity: colloidal vs pyrolytic

We have developed structure/toxicity relationships for amorphous silica nanoparticles (NPs) synthesized through low-temperature colloidal (e.g., Stöber silica) or high-temperature pyrolysis (e.g., fumed silica) routes. Through combined spectroscopic and physical analyses, we have determined the state of aggregation, hydroxyl concentration, relative proportion of strained and unstrained siloxane rings, and potential to generate hydroxyl radicals for Stöber and fumed silica NPs with comparable primary particle sizes (16 nm in diameter). On the basis of erythrocyte hemolytic assays and assessment of the viability and ATP levels in epithelial and macrophage cells, we discovered for fumed silica an important toxicity relationship to postsynthesis thermal annealing or environmental exposure, whereas colloidal silicas were essentially nontoxic under identical treatment conditions. Specifically, we find for fumed silica a positive correlation of toxicity with hydroxyl concentration and its potential to generate reactive oxygen species (ROS) and cause red blood cell hemolysis. We propose fumed silica toxicity stems from its intrinsic population of strained three-membered rings (3MRs) along with its chainlike aggregation and hydroxyl content. Hydrogen-bonding and electrostatic interactions of the silanol surfaces of fumed silica aggregates with the extracellular plasma membrane cause membrane perturbations sensed by the Nalp3 inflammasome, whose subsequent activation leads to secretion of the cytokine IL-1β. Hydroxyl radicals generated by the strained 3MRs in fumed silica, but largely absent in colloidal silicas, may contribute to the inflammasome activation. Formation of colloidal silica into aggregates mimicking those of fumed silica had no effect on cell viability or hemolysis. This study emphasizes that not all amorphous silicas are created equal and that the unusual toxicity of fumed silica compared to that of colloidal silica derives from its framework and surface chemistry along with its fused chainlike morphology established by high-temperature synthesis (>1300 °C) and rapid thermal quenching.

Development of risk-based nanomaterial groups for occupational exposure control

Given the almost limitless variety of nanomaterials, it will be virtually impossible to assess the possible occupational health hazard of each nanomaterial individually. The development of science-based hazard and risk categories for nanomaterials is needed for decision-making about exposure control practices in the workplace. A possible strategy would be to select representative (benchmark) materials from various mode of action (MOA) classes, evaluate the hazard and develop risk estimates, and then apply a systematic comparison of new nanomaterials with the benchmark materials in the same MOA class. Poorly soluble particles are used here as an example to illustrate quantitative risk assessment methods for possible benchmark particles and occupational exposure control groups, given mode of action and relative toxicity. Linking such benchmark particles to specific exposure control bands would facilitate the translation of health hazard and quantitative risk information to the development of effective exposure control practices in the workplace. A key challenge is obtaining sufficient dose-response data, based on standard testing, to systematically evaluate the nanomaterials' physical-chemical factors influencing their biological activity. Categorization processes involve both science-based analyses and default assumptions in the absence of substance-specific information. Utilizing data and information from related materials may facilitate initial determinations of exposure control systems for nanomaterials.

A review of mammalian toxicity of ZnO nanoparticles

This review summarizes the literature on mammalian toxicity of ZnO nanoparticles (NPs) published between 2009 and 2011. The toxic effects of ZnO NPs are due to the compound's solubility. Whether the increased intracellular [Zn(2+)] is due to the NPs being taken up by cells or to NP dissolution in medium is still unclear. In vivo airway exposure poses an important hazard. Inhalation or instillation of the NPs results in lung inflammation and systemic toxicity. Reactive oxygen species (ROS) generation likely plays an important role in the inflammatory response. The NPs do not, or only to a minimal extent, cross the skin; this also holds for sunburned skin. Intraperitoneal administration induces neurological effects. The NPs show systemic distribution; target organs are liver, spleen, lung, and kidney and, in some cases, the heart. In vitro exposure of BEAS-2B bronchial epithelial cells and A549 alveolar adenocarcinoma cells results in cytotoxicity, increased oxidative stress, increased intracellular [Ca(2+)], decreased mitochondrial membrane potential, and interleukin (IL)-8 production. Decreased contractility of airway smooth muscle cells poses an additional hazard. In contrast to the results for BEAS-2B and A549 cells, in RKO colon carcinoma cells ZnO NPs and not Zn(2+) induce cytotoxicity and mitochondrial dysfunction. Short-term exposure of skin cells results in apoptosis but not in an inflammatory response, while long-term exposure leads to increased ROS generation, decreased mitochondrial activity, and formation of tubular intercellular structures. Macrophages, monocytes, and dendritic cells are affected; exposure results in cytotoxicity, oxidative stress, intracellular Ca(2+) flux, decreased mitochondrial membrane potential, and production of IL-1β and chemokine CXCL9. The NPs are phagocytosed by macrophages and dissolved in lysosomes. In vitro the Comet assay and the cytokinesis-blocked micronucleus assay show genotoxicity, whereas the Ames test does not. This is, however, not confirmed by in vivo genotoxicity assays. Protein binding results in increased stability.

Designed synthesis of CeO2 nanorods and nanowires for studying toxicological effects of high aspect ratio nanomaterials

While it has been shown that high aspect ratio nanomaterials like carbon nanotubes and TiO(2) nanowires can induce toxicity by acting as fiber-like substances that damage the lysosome, it is not clear what the critical lengths and aspect ratios are that induce this type of toxicity. To answer this question, we synthesized a series of cerium oxide (CeO(2)) nanorods and nanowires with precisely controlled lengths and aspect ratios. Both phosphate and chloride ions were shown to play critical roles in obtaining these high aspect ratio nanostructures. High-resolution TEM analysis shows that single-crystalline CeO(2) nanorods/nanowires were formed along the [211] direction by an "oriented attachment" mechanism, followed by Ostwald ripening. The successful creation of a comprehensive CeO(2) nanorod/nanowire combinatorial library allows, for the first time, the systematic study of the effect of aspect ratio on lysosomal damage, cytotoxicity, and IL-1β production by the human myeloid cell line (THP-1). This in vitro toxicity study demonstrated that, at lengths ≥200 nm and aspect ratios ≥22, CeO(2) nanorods induced progressive pro-inflammatory effects and cytotoxicity. The relatively low "critical" length and aspect ratio were associated with small nanorod/nanowire diameters (6-10 nm), which facilitates the formation of stacking bundles due to strong van der Waals and dipole-dipole attractions. Our results suggest that both length and diameter components of aspect ratio should be considered when addressing the cytotoxic effects of high aspect ratio materials.

Interactions of amino acids and polypeptides with metal oxide nanoparticles probed by fluorescent indicator adsorption and displacement

The adsorption of polypeptides containing an N-terminal tryptophan (Trp) residue attached to a hexa-backbone of alanine, serine, lysine, histidine, and aspartate was investigated by monitoring the fluorescence response of the Trp chromophore upon titration with metal oxide nanoparticles (MOx-NPs: CuO, Co(3)O(4), TiO(2), MgO, and CeO(2)). After correction for light-scattering effects, a strong static fluorescence quenching was observed upon addition of CuO and Co(3)O(4) to the peptides. The interaction of MOx-NPs with the peptides was assigned to an adsorption of the peptide backbone on the nanoparticle surface. The method was refined using a derivatized amino acid, 5-fluoro-Trp (5F-Trp), which resulted in a stronger fluorescence response. The use of the fluorescent amino acid labels allowed the direct assessment of the adsorption propensities of Trp-containing peptides in dependence on the backbone, which was verified by zeta-potential measurements. Moreover, upon addition of different analytes to nanoparticles with preadsorbed Trp-containing polypeptides, adsorption propensities of the analytes were assessed by an indicator displacement strategy; that is, addition of increasing amounts of analyte resulted in a continuous fluorescence enhancement/recovery. This method afforded adsorption propensities for several analytes. The relative binding constants for the MOx-NPs, obtained from the competitive titrations, varied by more than 6 orders of magnitude for CuO (5F-TrpHis(6)-NH(2) > TrpAsp(6)-NH(2), TrpSer(6)-NH(2) > TrpLys(6)-NH(2), Trp, 5F-Trp > TrpAla(6)-NH(2)) but only 4 for Co(3)O(4) (TrpHis(6)-NH(2), TrpAsp(6)-NH(2) ≫ TrpLys(6)-NH(2), TrpAla(6)-NH(2), TrpSer(6)-NH(2), Trp, 5F-Trp). The study reveals that MOx-NPs adsorb biomolecular analytes with high selectivity, which has immediate implications for their applications in protein purification, drug delivery, and, potentially, for the assessment of their toxicology.