An overview of technologies for immobilization of enzymes and surface analysis techniques for immobilized enzymes

Synthesis of functional ionic liquid modified magnetic chitosan nanoparticles for porcine pancreatic lipase immobilization

We developed magnetic chitosan nanoparticles (CS‑Fe₃O₄) with mean diameter of 15-20 nm. Subsequently, these inorganic-organic composite nanoparticles were modified using an imidazole-based functional ionic liquid (IL). The prepared support (IL‑CS‑Fe₃O₄), which was used to immobilize porcine pancreatic lipase (PPL), was characterized using Fourier transform infrared (FTIR) spectroscopy, vibrating sample magnetometry (VSM), thermogravimetry (TG), transmission electron microscopy (TEM) and X-ray diffraction (XRD). Circular dichroism (CD) was used to analyze the secondary structure of immobilized PPL. The immobilized PPL (PPL‑IL‑CS‑Fe₃O₄) exhibited 1.93-fold higher specific activity than PPL‑CS-Fe₃O₄ when triacetin was used as the substrate, and showed 95 mg/g of lipase immobilization capacity and 382% of activity recovery. The residual activity of PPL‑IL‑CS‑Fe₃O₄ was above 60% of the initial activity after incubation at 50 °C for 6 h, as was higher than that of PPL‑CS‑Fe₃O₄ which showed 40% of the initial activity. In addition, PPL‑IL‑CS‑Fe₃O₄ retained 84.6% of the initial activity after 10 cycles, whereas PPL‑CS‑Fe₃O₄ retained only 75.5% activity. Furthermore, the kinetic parameters, apparent K_m and V_max of PPL‑IL‑CS‑Fe₃O₄ were 2.51 mg/mL and 1.395 U/mg respectively, these results indicated that the immobilized PPL had better affinity towards the substrate, especially when the nanoparticles were modified by functional IL. Besides, the magnetic chitosan nanoparticles loaded with PPL were easily recovered. A novel, efficient, and practical method for enzyme immobilization was developed.

Locally anchoring enzymes to tissues via extracellular glycan recognition

Success of enzymes as drugs requires that they persist within target tissues over therapeutically effective time frames. Here we report a general strategy to anchor enzymes at injection sites via fusion to galectin-3 (G3), a carbohydrate-binding protein. Fusing G3 to luciferase extended bioluminescence in subcutaneous tissue to ~7 days, whereas unmodified luciferase was undetectable within hours. Engineering G3-luciferase fusions to self-assemble into a trimeric architecture extended bioluminescence in subcutaneous tissue to 14 days, and intramuscularly to 3 days. The longer local half-life of the trimeric assembly was likely due to its higher carbohydrate-binding affinity compared to the monomeric fusion. G3 fusions and trimeric assemblies lacked extracellular signaling activity of wild-type G3 and did not accumulate in blood after subcutaneous injection, suggesting low potential for deleterious off-site effects. G3-mediated anchoring to common tissue glycans is expected to be broadly applicable for improving local pharmacokinetics of various existing and emerging enzyme drugs.

The use of enzymes as drugs requires that they persist within target tissues over therapeutically relevant time frames. Here the authors use a galectin-3 fusion to anchor enzymes at injection sites for up to 14 days.

Point-of-Care Compatibility of Ultra-Sensitive Detection Techniques for the Cardiac Biomarker Troponin I-Challenges and Potential Value

Cardiac biomarkers are frequently measured to provide guidance on the well-being of a patient in relation to cardiac health with many assays having been developed and widely utilised in clinical assessment. Effectively treating and managing cardiovascular disease (CVD) relies on swiftly responding to signs of cardiac symptoms, thus providing a basis for enhanced patient management and an overall better health outcome. Ultra-sensitive cardiac biomarker detection techniques play a pivotal role in improving the diagnostic capacity of an assay and thus enabling a better-informed decision. However, currently, the typical approach taken within healthcare depends on centralised laboratories performing analysis of cardiac biomarkers, thus restricting the roll-out of rapid diagnostics. Point-of-care testing (POCT) involves conducting the diagnostic test in the presence of the patient, with a short turnaround time, requiring small sample volumes without compromising the sensitivity of the assay. This technology is ideal for combatting CVD, thus the formulation of ultra-sensitive assays and the design of biosensors will be critically evaluated, focusing on the feasibility of these techniques for point-of-care (POC) integration. Moreover, there are several key factors, which in combination, contribute to the development of ultra-sensitive techniques, namely the incorporation of nanomaterials for sensitivity enhancement and manipulation of labelling methods. This review will explore the latest developments in cardiac biomarker detection, primarily focusing on the detection of cardiac troponin I (cTnI). Highly sensitive detection of cTnI is of paramount importance regarding the rapid rule-in/rule-out of acute myocardial infarction (AMI). Thus the challenges encountered during cTnI measurements are outlined in detail to assist in demonstrating the drawbacks of current commercial assays and the obstructions to standardisation. Furthermore, the added benefits of introducing multi-biomarker panels are reviewed, several key biomarkers are evaluated and the analytical benefits provided by multimarkers-based methods are highlighted.

Hydrogen Production from Energy Poplar Preceded by MEA Pre-Treatment and Enzymatic Hydrolysis

The need to pre-treat lignocellulosic biomass prior to dark fermentation results primarily from the composition of lignocellulose because lignin hinders the processing of hard wood towards useful products. Hence, in this work a two-step approach for the pre-treatment of energy poplar, including alkaline pre-treatment and enzymatic saccharification followed by fermentation has been studied. Monoethanolamine (MEA) was used as the alkaline catalyst and diatomite immobilized bed enzymes were used during saccharification. The response surface methodology (RSM) method was used to determine the optimal alkaline pre-treatment conditions resulting in the highest values of both total released sugars (TRS) yield and degree of lignin removal. Three variable parameters (temperature, MEA concentration, time) were selected to optimize the alkaline pre-treatment conditions. The research was carried out using the Box-Behnken design. Additionally, the possibility of the re-use of both alkaline as well as enzymatic reagents was investigated. Obtained hydrolysates were subjected to dark fermentation in batch reactors performed by Enterobacter aerogenes ATCC 13048 with a final result of 22.99 mL H₂/g energy poplar (0.6 mol H₂/mol TRS).

Self-Assembling All-Enzyme Hydrogels for Flow Biocatalysis

Continuous flow biocatalysis is an emerging field of industrial biotechnology that uses enzymes immobilized in flow channels for the production of value-added chemicals. We describe the construction of self-assembling all-enzyme hydrogels that are comprised of two tetrameric enzymes. The stereoselective dehydrogenase LbADH and the cofactor-regenerating glucose 1-dehydrogenase GDH were genetically fused with a SpyTag or SpyCatcher domain, respectively, to generate two complementary homo-tetrameric building blocks that polymerize under physiological conditions into porous hydrogels. Mounted in microfluidic reactors, the gels show excellent stereoselectivity with near quantitative conversion in the reduction of prochiral ketones along with high robustness under process and storage conditions. The gels function as compartment that retains intermediates thus enabling high total turnover numbers of the expensive cofactor NADP(H).

Interior Decoration of Stable Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are a diverse class of hybrid organic/inorganic crystalline materials composed of metal-containing nodes held in place by organic linkers. Through a discerning selection of these components, many properties such as the internal surface area, cavity size and shape, catalytic properties, thermal properties, and mechanical properties may be manipulated. Because of this high level of tunability, MOFs have been heralded as ideal platforms for various applications including gas storage, separation, catalysis, and chemical sensing. (1-8) Regrettably, these theoretical possibilities are limited by the reality of constraining conditions for solvothermal synthesis, which typically include high temperatures (usually over 100 °C), the use of specific solvents, and necessary exposure to acidic or basic conditions. In order to incorporate more delicate functionalities, postsynthesis decoration methods were developed. This feature article focuses on developed interior decoration methods for stable MOFs and the dynamic relationship between such methods and MOF stability. In particular, methods to transform organic, inorganic, and organometallic MOF parts as well as combination techniques, the generation of defects, and the inclusion of enzymes are addressed.

Production of Omegas-6 and 9 from the Hydrolysis of Açaí and Buriti Oils by Lipase Immobilized on a Hydrophobic Support

This paper describes a bioprocess to obtain omegas-6 and 9 from the hydrolysis of Açaí (Euterpe oleracea Martius) and Buriti (Mauritia flexuosa) oils by lipases immobilized on octyl-sepharose. For this, oils and butters were initially selected as the carbon source which resulted in higher production of lipases in Beauveria bassiana and Fusarium oxysporum cultures. The carbon source that provided secretion of lipase by B. bassiana was Açaí oil, and for F. oxysporum, Bacuri butter. Lipases obtained under these conditions were immobilized on octyl-sepharose, and both, the derivatives and the crude extracts were biochemically characterized. It was observed that the immobilization promoted an increase of stability in B. bassiana and F. oxysporum lipase activities at the given temperatures and pH. In addition, the immobilization promoted hyperactivation of B. bassiana and F. oxysporum lipase activities being 23.5 and 11.0 higher than free enzyme, respectively. The hydrolysis of Açaí and Buriti oils by the derivatives was done in a biphasic (organic/aqueous) system, and the products were quantified in RP-HPLC. The results showed the potential of these immobilized lipases to obtain omegas-6 and 9 from Brazilian natural oils. This work may improve the enzymatic methodologies for obtaining foods and drugs enriched with fatty acids.

Flexible Peptide Linkers Enhance the Antimicrobial Activity of Surface-Immobilized Bacteriolytic Enzymes

Chemical linkers are frequently used in enzyme immobilization to improve enzyme flexibility and activity, whereas peptide linkers, although ubiquitous in protein engineering, are much less explored in enzyme immobilization. Here, we report peptide-linker-assisted noncovalent immobilization of the bacteriolytic enzyme lysostaphin (Lst) to generate anti- Staphylococcus aureus surfaces. Lst was immobilized through affinity tags onto a silica surface (glass slides) and nickel nitrilotriacetic acid (NiNTA) agarose beads via silica-binding peptides (SiBPs) or a hexahistidine tag (His-tag) fused at the C-terminus of Lst, respectively. By inserting specific peptide linkers upstream of the SiBP or His-tag, the immobilized enzymes killed >99.5% of S. aureus ATCC 6538 cells (10⁸ CFU/mL) within 3 h in buffer and could be reused multiple times without significant loss of activity. In contrast, immobilized Lst without a peptide linker was less active/stable. Molecular modeling of Lst-linker-affinity tag constructs illustrated that the presence of the peptide linkers enhanced the molecular flexibility of the proximal Lst binding domain, which interacts with the bacterial substrate, and such increased flexibility correlated with increased antimicrobial activity. We further show that Lst immobilized onto NiNTA beads retained the ability to kill ∼99% of a 10⁸ CFU/mL microbial challenge even in the presence of 1% of a commercial anionic surfactant, C12-14 alcohol EO 3:1 sodium sulfate, when the Lst construct contained a decapeptide linker containing glycine, serine, and alanine residues. This linker-assisted immobilization strategy could be extended to an unrelated lytic enzyme, the endolysin PlyPH, to target Bacillus anthracis Sterne cells either in buffer or in the presence of anionic surfactants. Our approach, therefore, provides a facile route to the use of antimicrobial enzymes on surfaces.

Preparation of a Flower-Like Immobilized D-Psicose 3-Epimerase with Enhanced Catalytic Performance

In this present study, we proposed a smart biomineralization method for creating hybrid organic–inorganic nanoflowers using a Co2+-dependent enzyme (D-psicose 3-epimerase; DPEase) as the organic component and cobalt phosphate as the inorganic component. The prepared nanoflowers have many separated petals that have a nanometer size. Under optimum conditions (60 °C and pH of 8.5), the nanoflower can display its maximum activity (36.2 U/mg), which is about 7.2-fold higher than free DPEase. Furthermore, the immobilized DPEase presents enhanced pH and thermal stabilities. The DPEase-nanoflower maintained about 90% of its activity after six reaction cycles, highlighting its excellent reusability.

The Potential of Using Immobilized Xylanases to Enhance the Hydrolysis of Soluble, Biomass Derived Xylooligomers

Earlier work had indicated that enzyme-mediated hydrolysis of xylooligomer-rich water-soluble streams (derived from steam pre-treated wheat straw) resulted in the effective production of xylose which was subsequently used to produce bio-glycol. In the work reported here, both the thermostability and recyclability of xylanases were significantly improved by covalent immobilizing the enzymes onto alginate beads. The immobilized xylanases showed a lower hydrolytic potential (~55% xylooligomer conversion) compared to the commercial xylanase cocktail HTec3 (~90% xylooligomer conversion) when used at the same protein loading concentration. This was likely due to the less efficient immobilization of key higher molecular weight enzymes (>75 kDa), such as β-xylosidases. However, enzyme immobilization could be improved by lowering the glutaraldehyde loading used to activate the alginate beads, resulting in improved hydrolysis efficacy (~65% xylooligomer conversion). Enzyme immobilization improved enzyme thermostability (endoxylanase and β-xylosidase activities were improved by 80% and 40%, respectively, after 24 h hydrolysis) and this allowed the immobilized enzymes to be reused/recycled for multiple rounds of hydrolysis (up to five times) without any significant reduction in their hydrolytic potential.

Active biocatalyst for biodiesel production from spent coffee ground

Physical adsorption preserving activity and support reusability was used to directly bond lipase from Thermomyces lanuginosus on citric acid (CA) modified Fe₃O₄/Au magnetic nanoparticles. A new faster approach has been used for CA ligand exchange, which ensures an high payload of stable enzyme. The immobilized lipase was tested for the biodiesel production from spent coffee ground in a solvent free system. It retains, after 60 days, more than 90% of its initial activity. Biodiesel yield of 51.7%, after 3 h of synthesis, which increases up to ∼100% after 24 h indicating an enzymatic fast kinetic, was measured. No significant decrease, during the first three cycles of use, of the lipase activity occurs. The biodiesel presents an ester content of 98.4 ± 0.23 in agreement with the EN14214. The iodine value of 76.67 (g iodine/100 g) is in agreement with the European standard.

Immobilization and characterization of lipase from an indigenous Bacillus aryabhattai SE3-PB isolated from lipid-rich wastewater

Extracellular lipase from an indigenous Bacillus aryabhattai SE3-PB was immobilized in alginate beads by entrapment method. After optimization of immobilization conditions, maximum immobilization efficiencies of 77% ± 1.53% and 75.99% ± 3.49% were recorded at optimum concentrations of 2% (w/v) sodium alginate and 0.2 M calcium chloride, respectively, for the entrapped enzyme. Biochemical properties of both free and immobilized lipase revealed no change in the optimum temperature and pH of both enzyme preparations, with maximum activity attained at 60 °C and 9.5, respectively. In comparison to free lipase, the immobilized enzyme exhibited improved stability over the studied pH range (8.5-9.5) and temperature (55-65 °C) when incubated for 3 h. Furthermore, the immobilized lipase showed enhanced enzyme-substrate affinity and higher catalytic efficiency when compared to soluble enzyme. The entrapped enzyme was also found to be more stable, retaining 61.51% and 49.44% of its original activity after being stored for 30 days at 4 °C and 25 °C, respectively. In addition, the insolubilized enzyme exhibited good reusability with 18.46% relative activity after being repeatedly used for six times. These findings suggest the efficient and sustainable use of the developed immobilized lipase for various biotechnological applications.

Lipase immobilization on high water adsorbing capacity bagasse: applications in bio-based plasticizer synthesis

This study investigates the structure and water adsorbing capacity of bagasse and of sodium hydroxide pretreated bagasse. The structures of bagasse and bagasse-NaOH were compared by SEM and XRD. Candida antarctica lipase B was then immobilized on bagasse, bagasse-NaOH and DPA@bagasse-NaOH. The expressed activity and immobilization yield of lipase immobilized on bagasse-NaOH (1.0%) was 36% and 45% higher than that on bagasse. When dopamine (DPA) was used as cationic polymer monomer via self-polymerization for mediating immobilization, the protein loading amounts and activity of lipase immobilized on DPA@bagasse-NaOH were higher than that of bagasse-NaOH. When the DPA concentration was 100 mg/ml, the immobilized lipase expressed activity reached its highest value (800 U/g), where the immobilization yield achieved 96.8%, which was 3.93-fold of lipase immobilized on native bagasse (24.6%). Then the immobilized lipases were used to synthesize a bio-based plasticizer. Lipase immobilized on DPA@bagasse-NaOH exhibited a significantly improved operational stability. Even after 12 batches, a high ester yield (84.2%) was maintained. Additionally, poly (vinyl chloride) PVC blends plasticized with methyl oleate as a secondary plasticizer were investigated. It was discovered that methyl oleate can be used as an effective bio-based plasticizer for PVC. These results indicate that bagasse with high water adsorbing capacity and self-polymerized DPA layer could create a favorable microenvironment for bio-based plasticizer synthesis in esterification reactions.

Investigating Enzyme Activity of Immobilized Candida rugosa Lipase

Candida rugosa lipase is a food-grade enzyme that is extensively utilized in the dairy processing industry for milk fat hydrolysis. The enzyme is mainly employed to modify the fatty acid chain length that results in the enhancement of flavors. The hydrolytic activities of C. rugosa lipase (fungal source) in its free and immobilized forms were investigated at different pH and temperature settings. The main objective of this study was to understand how different support materials (Celite-545, Sephadex G-25, and chitosan) and immobilization techniques alter lipase activity and stability. Our results indicated that hydrolytic activity increased significantly with immobilization on Celite-545. In general, immobilization resulted in considerable improvements in the stability of the enzyme with variations in pH and temperature. Immobilization on Celite-545 led to the highest catalytic efficiency. Remarkable improvements in the recovery and reusability of the immobilized lipases were noted. Comparatively, the acetone immobilization procedure resulted in higher activities than alcohol immobilization. In conclusion, the activity of C. rugosa lipase was enhanced most significantly when immobilized on Celite-545 using acetone as an adsorption solvent.

Immobilized Biocatalysts

An application-related definition for immobilized enzymes was given by Chibata in 1978 […] 

Influence of Dlutaraldehyde Cross-Linking Modes on the Recyclability of Immobilized Lipase B from Candida antarctica for Transesterification of Soy Bean Oil

Lipase B from Candida antarctica (CAL-B) is largely employed as a biocatalyst for hydrolysis, esterification, and transesterification reactions. CAL-B is a good model enzyme to study factors affecting the enzymatic structure, activity and/or stability after an immobilization process. In this study, we analyzed the immobilization of CAL-B enzyme on different magnetic nanoparticles, synthesized by the coprecipitation method inside inverse micelles made of zwitterionic surfactants, with distinct carbon chain length: 4 (ImS4), 10 (ImS10) and 18 (ImS18) carbons. Magnetic nanoparticles ImS4 and ImS10 were shown to cross-link to CAL-B enzyme via a Michael-type addition, whereas particles with ImS18 were bond via pyridine formation after glutaraldehyde cross-coupling. Interestingly, the Michael-type cross-linking generated less stable immobilized CAL-B, revealing the influence of a cross-linking mode on the resulting biocatalyst behavior. Curiously, a direct correlation between nanoparticle agglomerate sizes and CAL-B enzyme reuse stability was observed. Moreover, free CAL-B enzyme was not able to catalyze transesterification due to the high methanol concentration; however, the immobilized CAL-B enzyme reached yields from 79.7 to 90% at the same conditions. In addition, the transesterification of lipids isolated from oleaginous yeasts achieved 89% yield, which confirmed the potential of immobilized CAL-B enzyme in microbial production of biodiesel.

Efficient Physisorption of Candida Antarctica Lipase B on Polypropylene Beads and Application for Polyester Synthesis

In the present work, Candida antarctica lipase B (CaLB) was adsorbed onto polypropylene beads using different reaction conditions, in order to investigate their influence on the immobilization process and the enzyme activity of the preparations in polymerization reactions. In general, lower salt concentrations were more favorable for the binding of enzyme to the carrier. Polymerisation of dimethyl adipate (DMA) and 1,4-butanediol (BDO) was investigated in thin-film systems at 70 °C and at both atmosphere pressure (1000 mbar) and 70 mbar. Conversion rates and molecular masses of the reaction products were compared with reactions catalyzed by CaLB in its commercially available form, known as Novozym 435 (CaLB immobilized on macroporous acrylic resin). The best results according to molecular weight and monomer conversion after 24 h reaction time were obtained with CaLB immobilized in 0.1 M Na2HPO4\NaH2PO4 buffer at pH 8, producing polyesters with 4 kDa at conversion rates of 96% under low pressure conditions. The stability of this preparation was studied in a simulated continuous polymerization process at 70 °C, 70 mbar for 4 h reaction time. The data of this continuous polymerizations show that the preparation produces lower molecular weights at lower conversion rates, but is comparable to the commercial enzyme concerning stability for 10 cycles. However, after 24 h reaction time, using our optimum preparation, higher molecular weight polyesters (4 kDa versus 3.1 kDa) were obtained when compared to Novozym 435.

Immobilized glucose oxidase on magnetic silica and alumina: Beyond magnetic separation

Here we report immobilization of glucose oxidase (GOx) on magnetic silica (Fe₃O₄-SiO₂) and alumina (Fe₃O₄-Al₂O₃) functionalized with amino groups using glutaraldehyde as a linker. Magnetic support based biocatalysts demonstrate high catalytic activity in d-glucose oxidation to D-gluconic acid at pH 5-7.5 and temperature of 30-50 °C with the best activities of 95% and 91% for magnetic silica and alumina, respectively. A comparison of magnetic and non-magnetic alumina and silica shows a significant enhancement of the relative catalytic activity for magnetic supports, while the silica based biocatalysts show a higher activity than the biocatalysts based on alumina. A noticeably higher activity of GOx immobilized on magnetic supports is explained by synergy of the GOx inherent activity and enzyme-like activity of iron oxide nanoparticles, while the enhancement with silica based catalysts is most likely due to a larger pore size and stronger Brønsted acid sites. Excellent relative activity of Fe₃O₄-SiO₂-GOx (95% of native GOx) in a tolerant pH and temperature range as well as high stability in a repeated use (6% relative activity loss after five catalytic cycles) makes this catalyst promising for practical applications.

Smart Nanoparticles for Selective Immobilization of Acid Phosphatases

An easy to use method combining the selectivity of metal chelate affinity binding with strong covalent linking was developed for immobilization of non-specific acid phosphatases bearing a His-tag from crude cell lysate. Silica nanoparticles were grafted with aminopropyl functions which were partially transformed further with EDTA dianhydride to chelators. The heterofunctionalized nanoparticles charged with Ni2+ as the most appropriate metal ion were applied as support. First, the His-tagged phosphatases were selectively bound to the metal-chelate functions of the support. Then, the enzyme-charged silica nanoparticles were further stabilized by forming a covalent linkage between nucleophilic moieties at the enzyme surface and free amino groups of the support using neopentylglycol diglycidylether as the most effective bifunctional linking agent. The phosphatase biocatalysts obtained by this method exhibited better phosphate transfer activity with a range of alcohols and PPi as phosphate donor in aqueous medium applying batch and continuous-flow modes than the ones immobilized on conventional supports. Furthermore, this novel strategy opens up novel possibility for efficient immobilization of other His-tagged recombinant enzymes.

Alkaline Phosphatase Immobilization on New Chitosan Membranes with Mg2+ for Biomedical Applications

In this paper, we present the fabrication and characterization of new chitosan-based membranes while using a new biotechnology for immobilizing alkaline phosphatase (ALP). This technology involved metal ions incorporation to develop new biopolymeric supports. The chemical structure and morphological characteristics of proposed membranes were evaluated by infrared spectroscopy (FT-IR) and the scanning electron microscopy technique (SEM). The inductively coupled plasma mass spectrometry (ICP-MS) evidenced the metal ion release in time. Moreover, the effect of Mg²⁺ on the enzymatic activity and the antibacterial investigations while using Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria, hemolysis, and biocompatibility behavior were studied. Immobilizing ALP into the chitosan membranes composition followed by the incorporation of Mg²⁺ led to polymeric supports with enhanced cellular viability when comparing to chitosan-based membranes without Mg²⁺. The results obtained evidenced promising performance in biomedical applications for the new biopolymeric supports that are based on chitosan, ALP, and metal ions.

Analysis of solute-protein interactions and solute-solute competition by zonal elution affinity chromatography

Many biological processes involve solute-protein interactions and solute-solute competition for protein binding. One method that has been developed to examine these interactions is zonal elution affinity chromatography. This review discusses the theory and principles of zonal elution affinity chromatography, along with its general applications. Examples of applications that are examined include the use of this method to estimate the relative extent of solute-protein binding, to examine solute-solute competition and displacement from proteins, and to measure the strength of these interactions. It is also shown how zonal elution affinity chromatography can be used in solvent and temperature studies and to characterize the binding sites for solutes on proteins. In addition, several alternative applications of zonal elution affinity chromatography are discussed, which include the analysis of binding by a solute with a soluble binding agent and studies of allosteric effects. Other recent applications that are considered are the combined use of immunoextraction and zonal elution for drug-protein binding studies, and binding studies that are based on immobilized receptors or small targets.

Sensors for Fetal Hypoxia and Metabolic Acidosis: A Review

This article reviews existing clinical practices and sensor research undertaken to monitor fetal well-being during labour. Current clinical practices that include fetal heart rate monitoring and fetal scalp blood sampling are shown to be either inadequate or time-consuming. Monitoring of lactate in blood is identified as a potential alternative for intrapartum fetal monitoring due to its ability to distinguish between different types of acidosis. A literature review from a medical and technical perspective is presented to identify the current advancements in the field of lactate sensors for this application. It is concluded that a less invasive and a more continuous monitoring device is required to fulfill the clinical needs of intrapartum fetal monitoring. Potential specifications for such a system are also presented in this paper.

Stabilizing displayed proteins on vegetative Bacillus subtilis cells

Microbes engineered to display heterologous proteins could be useful biotechnological tools for protein engineering, lignocellulose degradation, biocatalysis, bioremediation, and biosensing. Bacillus subtilis is a promising host to display proteins, as this model Gram-positive bacterium is genetically tractable and already used industrially to produce enzymes. To gain insight into the factors that affect displayed protein stability and copy number, we systematically compared the ability of different protease-deficient B. subtilis strains (WB800, BRB07, BRB08, and BRB14) to display a Cel8A-LysM reporter protein in which the Clostridium thermocellum Cel8A endoglucanase is fused to LysM cell wall binding modules. Whole-cell cellulase measurements and fractionation experiments demonstrate that genetically eliminating extracytoplasmic bacterial proteases improves Cel8A-LysM display levels. However, upon entering stationary phase, for all protease-deficient strains, the amount of displayed reporter dramatically decreases, presumably as a result of cellular autolysis. This problem can be partially overcome by adding chemical protease inhibitors, which significantly increase protein display levels. We conclude that strain BRB08 is well suited for stably displaying our reporter protein, as genetic removal of its extracellular and cell wall-associated proteases leads to the highest levels of surface-accumulated Cel8A-LysM without causing secretion stress or impairing growth. A two-step procedure is presented that enables the construction of enzyme-coated vegetative B. subtilis cells that retain stable cell-associated enzyme activity for nearly 3 days. The results of this work could aid the development of whole-cell display systems that have useful biotechnological applications.