Physical Principles of Nanoparticle Cellular Endocytosis

Gold Nanoparticles in Single-Cell Analysis for Surface Enhanced Raman Scattering

The need for new therapeutic approaches in the treatment of challenging diseases such as cancer, which often consists of a highly heterogeneous and complex population of cells, brought up the idea of analyzing single cells. The development of novel techniques to analyze single cells has been intensively studied to fully understand specific alternations inducing abnormalities in cellular function. One of the techniques used for single cell analysis is surface-enhanced Raman spectroscopy (SERS) in which a noble metal nanoparticle is used to enhance Raman scattering. Due to its low toxicity and biocompatibility, gold nanoparticles (AuNPs) are commonly preferred as SERS substrates in single cell analysis. The intracellular uptake, localization and toxicity issues of AuNPs are the critical points for interpretation of data since the obtained SERS signals originate from molecules in close vicinity to AuNPs that are taken up by the cells. In this review, the AuNP-living cell interactions, cellular uptake and toxicity of AuNPs in relation to their physicochemical properties, and surface-enhanced Raman scattering from single cells are discussed.

Hydrophobic Carbon Nanodots with Rapid Cell Penetrability and Tunable Photoluminescence Behavior for in Vitro and in Vivo Imaging

Tunable fluorescent emission and applications in both in vitro and in vivo imaging of hydrophobic carbon nanodots (CNDs) with rapid penetration capability are reported. The hydrophobic CNDs are prepared via hydrothermal treatment of ionic liquid 1-ethyl-3-methylimidazolium bromide and exhibit excitation-dependent photoluminescence behavior along with a red-shift in the excitation/emission maxima with concentration. The quantum yields of the as-prepared CNDs are in the range of 2.5-4.8% at an excitation wavelength of 300-600 nm. The rapid penetration behavior (within 1 min) of CNDs into the cell membrane significantly reduces the sample treatment time and avoids potential fluorescence quenching induced by the interaction between CNDs and samples. A co-location study reveals that the hydrophobic CNDs are distributed mainly in the lysosome. The potentials of the hydrophobic CNDs as fluorescent probe in in vitro and in vivo imaging are well demonstrated by the labeling of HeLa cells, MCF-7 cells, A549 cells, and Kunming mice.

Biointerfacing and Applications of Cell Membrane-Coated Nanoparticles

The cell membrane-coated nanoparticle is a biomimetic platform consisting of a nanoparticulate core coated with membrane derived from a cell, such as a red blood cell, platelet, or cancer cell. The cell membrane "disguise" allows the particles to be perceived by the body as the source cell by interacting with its surroundings using the translocated surface membrane components. The newly bestowed characteristics of the membrane-coated nanoparticle can be utilized for biological interfacing in the body, providing natural solutions to many biomedical issues. This Review will cover the interactions of these cell membrane-coated nanoparticles and their applications within three biomedical areas of interest, including (i) drug delivery, (ii) detoxification, and (iii) immune modulation.

Optimization of Curcumin-Loaded PEG-PLGA Nanoparticles by GSH Functionalization: Investigation of the Internalization Pathway in Neuronal Cells

One major challenge in the field of nanotherapeutics is to increase the selective delivery of cargo to targeted cells. Using polylactic-co-glycolic acid (PLGA), we recently highlighted the importance of polymer composition in the biological fate of the nanodrug delivery systems. However, the route of internalization of polymeric nanoparticles (NPs) is another key component to consider in the elaboration of modern and targeted devices. For that purpose, herein, we effectively synthesized and characterized glutathione-functionalized PLGA-nanoparticles (GSH-NPs) loaded with curcumin (GSH-NPs-Cur), using thiol-maleimide click reaction and determined their physicochemical properties. We found that GSH functionalization did not affect the drug loading efficiency (DLE), the size, the polydispersity index (PDI), the zeta potential, the release profile, and the stability of the formulation. While being nontoxic, the presence of GSH on the surface of the formulations exhibits a better neuroprotective property against acrolein. The neuronal internalization of GSH-NPs-Cur was higher than free curcumin. In order to track the intracellular localization of the formulations, we used a covalently attached rhodamine (PLGA-Rhod), into our GSH-functionalized matrix. We found that GSH-functionalized matrix could easily be taken up by neuronal cells. Furthermore, we found that GSH conjugation modifies the route of internalization enabling them to escape the uptake through macropinocytosis and therefore avoiding the lysosomal degradation. Taken together, GSH functionalization increases the uptake of formulations and modifies the route of internalization toward a safer pathway. This study shows that the choice of ideal ligand to develop NPs-targeting devices is a crucial step when designing innovative strategy for neuronal cells delivery.

Dynamic Flow Impacts Cell-Particle Interactions: Sedimentation and Particle Shape Effects

The interaction of engineered particles with biological systems determines their performance in biomedical applications. Although standard static cell cultures remain the norm for in vitro studies, modern models mimicking aspects of the dynamic in vivo environment have been developed. Herein, we investigate fundamental cell-particle interactions under dynamic flow conditions using a simple and self-contained device together with standard multiwell cell culture plates. We engineer two particle systems and evaluate their cell interactions under dynamic flow, and we compare the results to standard static cell cultures. We find substantial differences between static and dynamic flow conditions and attribute these to particle shape and sedimentation effects. These results demonstrate how standard static assays can be complemented by dynamic flow assays for a more comprehensive understanding of fundamental cell-particle interactions.

Imaging Upconverting Polymersomes in Cancer Cells: Biocompatible Antioxidants Brighten Triplet-Triplet Annihilation Upconversion

Light upconversion is a very powerful tool in bioimaging as it can eliminate autofluorescence, increase imaging contrast, reduce irradiation damage, and increase excitation penetration depth in vivo. In particular, triplet-triplet annihilation upconverting (TTA-UC) nanoparticles and liposomes offer high upconversion efficiency at low excitation power. However, TTA-UC is quenched in air by oxygen, which also leads to the formation of toxic singlet oxygen. In this work, polyisobutylene-monomethyl polyethylene glycol block copolymers are synthesized and used for preparing polymersomes that upconvert red light into blue light in absence of oxygen. In addition, it is demonstrated that biocompatible antioxidants such as l-ascorbate, glutathionate, l-histidine, sulfite, trolox, or even opti-MEM medium, can be used to protect the TTA-UC process in these polymersomes resulting in red-to-blue upconversion under aerobic conditions. Most importantly, this approach is also functional in living cells. When A549 lung carcinoma cells are treated with TTA-UC polymersomes in the presence of 5 × 10^-3 m ascorbate and glutathionate, upconversion in the living cells is one order of magnitude brighter than that observed without antioxidants. These results propose a simple chemical solution to the issue of oxygen sensitivity of TTA-UC, which is of paramount importance for the technological advancement of this technique in biology.

CeF3-ZnO scintillating nanocomposite for self-lighted photodynamic therapy of cancer

We report on the synthesis and characterization of a composite nanostructure based on the coupling of cerium fluoride (CeF3) and zinc oxide (ZnO) for applications in self-lighted photodynamic therapy. Self-lighted photodynamic therapy is a novel approach for the treatment of deep cancers by low doses of X-rays. CeF3 is an efficient scintillator: when illuminated by X-rays it emits UV light by fluorescence at 325 nm. In this work, we simulate this effect by exciting directly CeF3 fluorescence by UV radiation. ZnO is photo-activated in cascade, to produce reactive oxygen species. This effect was recently demonstrated in a physical mixture of distinct nanoparticles of CeF3 and ZnO [Radiat. Meas. (2013) 59:139-143]. Oxide surface provides a platform for rational functionalization, e.g., by targeting molecules for specific tumors. Our composite nanostructure is stable in aqueous media with excellent optical coupling between the two components; we characterize its uptake and its good cell viability, with very low intrinsic cytotoxicity in dark.

Hydrodynamic Propulsion of Liposomes Electrostatically Attracted to a Lipid Membrane Reveals Size-Dependent Conformational Changes

The efficiency of lipid nanoparticle uptake across cellular membranes is strongly dependent on the very first interaction step. Detailed understanding of this step is in part hampered by the large heterogeneity in the physicochemical properties of lipid nanoparticles, such as liposomes, making conventional ensemble-averaging methods too blunt to address details of this complex process. Here, we contribute a means to explore whether individual liposomes become deformed upon binding to fluid cell-membrane mimics. This was accomplished by using hydrodynamic forces to control the propulsion of nanoscale liposomes electrostatically attracted to a supported lipid bilayer. In this way, the size of individual liposomes could be determined by simultaneously measuring both their individual drift velocity and diffusivity, revealing that for a radius of ∼45 nm, a close agreement with dynamic light scattering data was observed, while larger liposomes (radius ∼75 nm) displayed a significant deformation unless composed of a gel-phase lipid. The relevance of being able to extract this type of information is discussed in the context of membrane fusion and cellular uptake.

Algorithm for Designing Nanoscale Supramolecular Therapeutics with Increased Anticancer Efficacy

In the chemical world, evolution is mirrored in the origin of nanoscale supramolecular structures from molecular subunits. The complexity of function acquired in a supramolecular system over a molecular subunit can be harnessed in the treatment of cancer. However, the design of supramolecular nanostructures is hindered by a limited atomistic level understanding of interactions between building blocks. Here, we report the development of a computational algorithm, which we term Volvox after the first multicellular organism, that sequentially integrates quantum mechanical energy-state- and force-field-based models with large-scale all-atomistic explicit water molecular dynamics simulations to design stable nanoscale lipidic supramolecular structures. In one example, we demonstrate that Volvox enables the design of a nanoscale taxane supramolecular therapeutic. In another example, we demonstrate that Volvox can be extended to optimizing the ratio of excipients to form a stable nanoscale supramolecular therapeutic. The nanoscale taxane supramolecular therapeutic exerts greater antitumor efficacy than a clinically used taxane in vivo. Volvox can emerge as a powerful tool in the design of nanoscale supramolecular therapeutics for effective treatment of cancer.

Self-assembly of core-polyethylene glycol-lipid shell (CPLS) nanoparticles and their potential as drug delivery vehicles

Herein a new multifunctional formulation, referred to as a core-polyethylene glycol-lipid shell (CPLS) nanoparticle, has been proposed and studied in silico via large scale coarse-grained molecular dynamics simulations. A PEGylated core with surface tethered polyethylene glycol (PEG) chains is used as the starting configuration, where the free ends of the PEG chains are covalently bonded with lipid molecules (lipid heads). A complete lipid bilayer is formed at the surface of the PEGylated particle core upon addition of free lipids, driven by the hydrophobic properties of the lipid tails, leading to the formation of a CPLS nanoparticle. The self-assembly process is found to be sensitive to the grafting density and molecular weight of the tethered PEG chains, as well as the amount of free lipids added. At low grafting densities the assembly of CPLS nanoparticles cannot be accomplished. As demonstrated by simulations, a lipid bud/vesicle can be formed on the surface when an excess amount of free lipids is added at high grafting density. Therefore, the CPLS nanoparticles can only be formed under appropriate conditions of both PEG and free lipids. The CPLS nanoparticle has been recognized to be able to store a large quantity of water molecules, particularly with high molecular weight of PEG chains, indicating its capacity for carrying hydrophilic molecules such as therapeutic biomolecules or imaging agents. Under identical size and surface chemistry conditions of a liposome, it has been observed that the CPLS particle can be more efficiently wrapped by the lipid membrane, indicating its potential for a greater efficiency in delivering its hydrophilic cargo. As a proof-of-concept, the experimental realization of CPLS nanoparticles is explicitly demonstrated in this study. To test the capacity of the CPLS to store small molecule cargo a hydrophilic dye was successfully encapsulated in the particles' water soluble layer. The results of this study show the power and potential of simulation-driven approaches for guiding the design of more efficient nanomaterial delivery platforms.

Microfluidics-mediated assembly of functional nanoparticles for cancer-related pharmaceutical applications

The controlled synthesis of functional nanoparticles with tunable structures and properties has been extensively investigated for cancer treatment and diagnosis. Among a variety of methods for fabrication of nanoparticles, microfluidics-based synthesis enables enhanced mixing and precise fluidic modulation inside microchannels, thus allowing for the flow-mediated production of nanoparticles in a controllable manner. This review focuses on recent advances of using microfluidic devices for the synthesis of drug-loaded nanoparticles with specific characteristics (such as size, composite, surface modification, structure and rigidity) for enhanced cancer treatment and diagnosis as well as to investigate the bio-nanoparticle interaction. The discussion on microfluidics-based synthesis may shed light on the rational design of functional nanoparticles for cancer-related pharmaceutical applications.

Cellular Uptake and Movement in 2D and 3D Multicellular Breast Cancer Models of Fructose-Based Cylindrical Micelles That Is Dependent on the Rod Length

While the shape effect of nanoparticles on cellular uptake has been frequently studied, no consistent conclusions are available currently. The controversy mainly focuses on the cellular uptake of elongated (i.e., filaments or rod-like micelles) as compared to spherical (i.e., micelles and vesicles) nanoparticles. So far, there is no clear trend that proposes the superiority of spherical or nonspherical nanoparticles with conflicting reports available in the literature. One of the reasons is that these few reports available deal with nanoparticles of different shapes, surface chemistries, stabilities, and aspects ratios. Here, we investigated the effect of the aspect ratio of cylindrical micelles on the cellular uptake by breast cancer cell lines MCF-7 and MDA-MB-231. Cylindrical micelles, also coined rod-like micelles, of various length were prepared using fructose-based block copolymers poly(1-O-methacryloyl-β-d-fructopyranose)-b-poly(methyl methacrylate). The critical water content, temperature, and stirring rate that trigger the morphological transition from spheres to rods of various aspect ratios were identified, allowing the generation of different kinetically trapping morphologies. High shear force as they are found with high stirring rates was observed to inhibit the formation of long rods. Rod-like micelles with length of 500-2000 nm were subsequently investigated toward their ability to translocate in breast cancer cells and penetrate into MCF-7 multicellular spheroid models. It was found that shorter rods were taken up at a higher rate than longer rods.

Functionalized Mesoporous Silica Nanoparticle with Antioxidants as a New Carrier That Generates Lower Oxidative Stress Impact on Cells

Mesoporous silica nanoparticles (MSNs) were covalently coated with antioxidant molecules, namely, caffeic acid (MSN-CAF) or rutin (MSN-RUT), in order to diminish the impact of oxidative stress induced after transfection into cells, thus generating safer carriers used for either drug delivery or other applications. Two cellular models involved in the entry of NPs in the body were used for this purpose: the intestinal Caco-2 and the epidermal HaCaT cell lines. Rutin gave the best results in terms of antioxidant capacities preservation during coupling procedures, cellular toxicity alleviation, and decrease of ROS level after 24 h incubation of cells with grafted nanoparticles. These protective effects of rutin were found more pronounced in HaCaT than in Caco-2 cells, indicating some cellular specificity toward defense against oxidative stress. In order to gain more insight about the Nrf2 response, a stable transfected HaCaT cell line bearing repeats of the antioxidant response element (ARE) in front of a luciferase reporter gene was generated. In this cell line, both tBHQ and quercetin (Nrf2 agonists), but not rutin, were able to induce, in a dose-dependent fashion, the luciferase response. Interestingly, at high concentration, MSN-RUT was able to induce a strong Nrf2 protective response in HaCaT cells, accompanied by a comparable induction of HO-1 mRNA. The level of these responses was again less important in Caco-2 cells. To conclude, in keratinocyte cell line, the coupling of rutin to silica nanoparticles was beneficial in term of ROS reduction, cellular viability, and protective effects mediated through the activation of the Nrf2 antioxidant pathway.

Nonspecific Organelle-Targeting Strategy with Core-Shell Nanoparticles of Varied Lipid Components/Ratios

We report a nonspecific organelle-targeting strategy through one-step microfluidic fabrication and screening of a library of surface charge- and lipid components/ratios-varied lipid shell-polymer core nanoparticles. Different from the common strategy relying on the use of organelle-targeted moieties conjugated onto the surface of nanoparticles, here, we program the distribution of hybrid nanoparticles in lysosomes or mitochondria by tuning the lipid components/ratios in shell. Hybrid nanoparticles with 60% 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and 20% 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) can intracellularly target mitochondria in both in vitro and in vivo models. While replacing DOPE with the same amount of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), the nanoparticles do not show mitochondrial targeting, indicating an incremental effect of cationic and fusogenic lipids on lysosomal escape which is further studied by molecular dynamics simulations. This work unveils the lipid-regulated subcellular distribution of hybrid nanoparticles in which target moieties and complex synthetic steps are avoided.

Synthesis of diblock/statistical cationic glycopolymers with pendant galactose and lysine moieties: gene delivery application and intracellular behaviors

A new series of cationic block copolymers PHML-b-PMAGal and statistical copolymers P(HML-st-MAGal) with pendant natural galactose and (l-)-lysine moieties were prepared via RAFT (reversible addition-fragmentation chain-transfer) polymerization. The block/statistical copolymers showed a high plasmid DNA binding affinity (N/P < 2) and the as-formed polyplexes were spherical nanoparticles with the average size of 100-300 nm and surface zeta potentials of +30.2 to +46.3 mV. The cytotoxicity and gene transfection efficacy of the PHML-b-PMAGal and P(HML-st-MAGal) vectors strongly depend on the polymer architectures (block/statistical) and the galactose content. Notably, the statistical copolymer P(HML₄₀-st-MAGal₄) with 4.8% galactose content showed the highest gene transfection efficiency among the synthesized cationic polymers, 6.8-fold higher than that of the "gold standard" bPEI-25k in the presence of 10% FBS (fetal bovine serum) in various cell lines. An intracellular uptake mechanism (with 10% FBS) study demonstrated that the P(HML₄₀-st-MAGal₄)/pDNA polyplexes entered H1299 cells mainly through caveolae-mediated endocytosis and microtubule-dependent endocytosis pathways. Moreover, the fluorescence imaging study showed that the P(HML₄₀-st-MAGal₄)/pDNA polyplexes possessed an obvious "lysosomal escaping" effect that led to efficient pDNA release, which might interpret the fact of the significant increase of the related gene transfection efficiency. Moreover, it could be anticipated that the P(HML₄₀-st-MAGal₄) cationic glycopolymer might be employed as a low toxic, highly efficient and serum-compatible gene carrier for practical applications.

Atomic Force Microscopic Analysis of the Effect of Lipid Composition on Liposome Membrane Rigidity

Mechanical rigidity of the liposome membrane is often defined by the membrane bending modulus and is one of the determinants of liposome stability, but the quantitative experimental data are still limited to a few kinds of liposomes. Here, we used atomic force microscopy to investigate the membrane bending moduli of liposomes by immobilizing them on bovine serum albumin-coated glass in aqueous medium. The following lipids were used for liposome preparation: egg yolk phosphatidylcholine, dioleoylphosphatidylcholine, hydrogenated soybean phosphatidylcholine, dipalmitoylphosphatidylcholine, 1,2-dioleoyl-3-trimethylammonium-propane, cholesterol, and N-(carbonylmethoxypoly(ethylene glycol) 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine. By using liposomes of various compositions, we showed that the thermodynamic phase state of the membrane rather than the electric potential or liposome surface modification with poly(ethylene glycol) is the predominant determinant of the bending modulus, which decreased in the following order: solid ordered > liquid ordered > liquid disordered. By using the generalized polarization value of the Laurdan fluorescent probe, we investigated membrane rigidity in terms of membrane fluidity. Atomic force microscopic analysis was superior to the Laurdan method, especially in evaluating the membrane rigidity of liposomes containing hydrogenated soybean phosphatidylcholine and cholesterol. Positively charged liposomes with a large bending modulus were taken up by cells more efficiently than those with a small bending modulus. These findings offer a quantitative method of analyzing the membrane rigidity of nanosized liposomes with different lipid compositions and will contribute to the control of liposome stability and cellular uptake efficiency of liposomal formulations intended for clinical use.

Self-assembly of high-nuclearity lanthanide-based nanoclusters for potential bioimaging applications

Two series of Cd-Ln and Ni-Ln clusters [Ln8Cd24L12(OAc)44(48)Cl4(0)] and [Ln8Ni6L6(OAc)24(EtOH)6(H2O)2] were constructed using a flexible ligand. The Cd-Ln clusters exhibit interesting nano-drum-like structures which allows direct visualization by TEM. Luminex MicroPlex Microspheres loaded with the Cd-Sm cluster were visualized using epifluorescence microscopy. Cytotoxicity studies on A549 and AGS cancer cell lines showed that the materials have mild to moderate cytotoxicity.

Transcutaneous iontophoretic delivery of STAT3 siRNA using layer-by-layer chitosan coated gold nanoparticles to treat melanoma

Overexpression of signal transducer and activator of transcription 3 (STAT3) protein prevents apoptosis and enhances proliferation of melanocytes. The aim of this study was to investigate the feasibility of using layer-by-layer assembled gold nanoparticles (LbL-AuNP) as a carrier for iontophoretic delivery of STAT3 siRNA to treat melanoma. Chitosan coated AuNP (AuNP-CS) were prepared by direct reduction of HAuCl4 in the presence of chitosan. The AuNP-CS were then sequentially layered with siRNA and chitosan to form AuNP-CS/siRNA/CS. STAT3 siRNA replaced with scrambled siRNA or sodium alginate were used as controls. The average particle size and zeta-potential of the prepared LbL-AuNP were 150±10nm (PDI: 0.41±0.06) and 35±6mV, respectively. In vitro studies in B16F10 murine melanoma cells showed that AuNP-CS/siRNA/CS inhibited the cell growth by 49.0±0.6% and 66.0±0.2% at 0.25nM and 0.5nM STAT3 siRNA concentration, respectively. Fluorescence microscopy and flow cytometry studies showed a time dependent cell uptake of the LbL-AuNP up to 120min. Clathrin mediated endocytosis was found to be the predominant cell uptake mechanism for LbL-AuNP. STAT3 siRNA loaded LbL-AuNP reduced the STAT3 protein expression by 47.3% in B16F10 cells. Similarly, apoptosis assay showed 29% and 44% of early and late apoptotic events, respectively after treatment with STAT3 siRNA loaded LbL-AuNP. Confocal microscope and skin cryosections showed that application of 0.47mA/cm(2) of anodal iontophoresis enhanced the skin penetration of LbL-AuNP to reach viable epidermis. In conclusion, layer-by-layer chitosan coated AuNP can be developed as a carrier for iontophoretic delivery of STAT3 siRNA to treat melanoma.

Magnetofection Enhances Adenoviral Vector-based Gene Delivery in Skeletal Muscle Cells

The goal of magnetic field-assisted gene transfer is to enhance internalization of exogenous nucleic acids by association with magnetic nanoparticles (MNPs). This technique named magnetofection is particularly useful in difficult-to-transfect cells. It is well known that human, mouse, and rat skeletal muscle cells suffer a maturation-dependent loss of susceptibility to Recombinant Adenoviral vector (RAd) uptake. In postnatal, fully differentiated myofibers, the expression of the primary Coxsackie and Adenoviral membrane receptor (CAR) is severely downregulated representing a main hurdle for the use of these vectors in gene transfer/therapy. Here we demonstrate that assembling of Recombinant Adenoviral vectors with suitable iron oxide MNPs into magneto-adenovectors (RAd-MNP) and further exposure to a gradient magnetic field enables to efficiently overcome transduction resistance in skeletal muscle cells. Expression of Green Fluorescent Protein and Insulin-like Growth Factor 1 was significantly enhanced after magnetofection with RAd-MNPs complexes in C2C12 myotubes in vitro and mouse skeletal muscle in vivo when compared to transduction with naked virus. These results provide evidence that magnetofection, mainly due to its membrane-receptor independent mechanism, constitutes a simple and effective alternative to current methods for gene transfer into traditionally hard-to-transfect biological models.

The effect of nanoparticle size on in vivo pharmacokinetics and cellular interaction

Nanoparticle-based technologies offer exciting new approaches to disease diagnostics and therapeutics. To take advantage of unique properties of nanoscale materials and structures, the size, shape and/or surface chemistry of nanoparticles need to be optimized, allowing their functionalities to be tailored for different biomedical applications. Here we review the effects of nanoparticle size on cellular interaction and in vivo pharmacokinetics, including cellular uptake, biodistribution and circulation half-life of nanoparticles. Important features of nanoparticle probes for molecular imaging and modeling of nanoparticle size effects are also discussed.

Decorating Nanoparticle Surface for Targeted Drug Delivery: Opportunities and Challenges

The size, shape, stiffness (composition) and surface properties of nanoparticles (NPs) have been recognized as key design parameters for NP-mediated drug delivery platforms. Among them, the surface functionalization of NPs is of great significance for targeted drug delivery. For instance, targeting moieties are covalently coated on the surface of NPs to improve their selectively and affinity to cancer cells. However, due to a broad range of possible choices of surface decorating molecules, it is difficult to choose the proper one for targeted functions. In this work, we will review several representative experimental and computational studies in selecting the proper surface functional groups. Experimental studies reveal that: (1) the NPs with surface decorated amphiphilic polymers can enter the cell interior through penetrating pathway; (2) the NPs with tunable stiffness and identical surface chemistry can be selectively accepted by the diseased cells according to their stiffness; and (3) the NPs grafted with pH-responsive polymers can be accepted or rejected by the cells due to the local pH environment. In addition, we show that computer simulations could be useful to understand the detailed physical mechanisms behind these phenomena and guide the design of next-generation NP-based drug carriers with high selectivity, affinity, and low toxicity. For example, the detailed free energy analysis and molecular dynamics simulation reveals that amphiphilic polymer-decorated NPs can penetrate into the cell membrane through the "snorkeling" mechanism, by maximizing the interaction energy between the hydrophobic ligands and lipid tails. We anticipate that this work will inspire future studies in the design of environment-responsive NPs for targeted drug delivery.

Influence of Different Nanomaterials on Growth and Mycotoxin Production of Penicillium verrucosum

Nanoparticles are ubiquitous in the environment. They originate from anthropogenic or natural sources or they are intentionally produced for different purposes. There exist manifold applications of nanoparticles in modern life leading unavoidably to a confrontation and interaction between nanomaterial and living organisms. Based on their wide distribution tending to increase steadily, the influence of particles based on silica and silver, exhibiting nominal sizes between 0.65 nm and 200 nm, on the physiology of the mycotoxigenic filamentous fungus Penicillium verrucosum was analyzed. The applied concentration and time-point, the size and the chemical composition of the particles was shown to have a strong influence on growth and mycotoxin biosynthesis. On microscopic scale it could be shown that silver nanoparticles attach to the mycelial surface. Moreover, silver nanoparticles with 0.65 nm and 5 nm in size were shown to internalize within the cell, form agglomerates in the cytoplasm and associate to cell organelles.

Cell and nanoparticle transport in tumour microvasculature: the role of size, shape and surface functionality of nanoparticles

Through nanomedicine, game-changing methods are emerging to deliver drug molecules directly to diseased areas. One of the most promising of these is the targeted delivery of drugs and imaging agents via drug carrier-based platforms. Such drug delivery systems can now be synthesized from a wide range of different materials, made in a number of different shapes, and coated with an array of different organic molecules, including ligands. If optimized, these systems can enhance the efficacy and specificity of delivery compared with those of non-targeted systems. Emerging integrated multiscale experiments, models and simulations have opened the door for endless medical applications. Current bottlenecks in design of the drug-carrying particles are the lack of knowledge about the dispersion of these particles in the microvasculature and of their subsequent internalization by diseased cells (Bao et al. 2014 J. R. Soc. Interface 11, 20140301 (doi:10.1098/rsif.2014.0301)). We describe multiscale modelling techniques that study how drug carriers disperse within the microvasculature. The immersed molecular finite-element method is adopted to simulate whole blood including blood plasma, red blood cells and nanoparticles. With a novel dissipative particle dynamics method, the beginning stages of receptor-driven endocytosis of nanoparticles can be understood in detail. Using this multiscale modelling method, we elucidate how the size, shape and surface functionality of nanoparticles will affect their dispersion in the microvasculature and subsequent internalization by targeted cells.

How tubular aggregates interact with biomembranes: wrapping, fusion and pearling

How soft tubular aggregates interact with biomembranes is crucial for understanding the formation of membrane tubes connecting two eukaryotic cells, which are initially created from one cell and then connect with the other.

Smart multifunctional nanoparticles in nanomedicine

Recent advances in nanotechnology caused a growing interest using nanomaterials in medicine to solve a number of issues associated with therapeutic agents. The fabricated nanomaterials with unique physical and chemical properties have been investigated for both diagnostic and therapeutic applications. Therapeutic agents have been combined with the nanoparticles to minimize systemic toxicity, increase their solubility, prolong the circulation half-life, reduce their immunogenicity and improve their distribution. Multifunctional nanoparticles have shown great promise in targeted imaging and therapy. In this review, we summarized the physical parameters of nanoparticles for construction of “smart” multifunctional nanoparticles and their various surface engineering strategies. Outlook and questions for the further researches were discussed.

Nano-rods of doxorubicin with poly(l-glutamic acid) as a carrier-free formulation for intratumoral cancer treatment

Nano-rods of doxorubicin (DOX) were prepared by co-assembly with poly(l-glutamic acid) (PGA) and demonstrated a desired release profile for intratumoral administration that significantly prolonged the survival time of tumor-bearing mice.

Influence of cell size on cellular uptake of gold nanoparticles

Cell size affects cellular uptake of gold nanoparticles (AuNPs).

Small‑sized gold nanoparticles inhibit the proliferation and invasion of SW579 cells

The present study reported on an intrinsic property of gold nanoparticles (Au‑NPs), namely their ability to inhibit the proliferation and invasion of thyroid carcinoma cells. Au‑NPs of various sizes (5‑60 nm) were synthesized and their uptake into the SW579 human thyroid carcinoma cell line was verified using transmission electron microscopy (TEM). The viability, apoptosis, cell cycle distribution and invasive capacity of SW579 cells were assessed following treatment with Au‑NPs using a Cell Counting Kit‑8 assay, flow cytometric analysis and a Transwell as well as a fluorometric invasion assay. TEM demonstrated that all sizes of Au‑NPs could be taken up by the SW579 cells. The results showed that small‑sized Au‑NPs (5 and 10 nm) significantly suppressed the proliferation and invasion of SW579 cells and induced apoptosis as well as cell cycle arrest in G0/G1 phase, while larger‑sized gold nanoparticles (20‑60 nm) did not exert these effects, therefore suggesting that the effects of Au‑NPs on SW579 cells were highly associated with their particle size. The reduction of the invasive capacity of SW579 cells following treatment with Au‑NPs may be attributed to decreases in the expression of matrix metalloproteinase‑2 and ‑9, which were observed using western blot and reverse‑transcription quantitative polymerase chain reaction analyses. The present study was the first to demonstrate that small‑sized Au‑NPs inhibit the proliferation and invasion of thyroid carcinoma cells, which may contribute to the advancement of biomedical applications of Au‑NPs.