Lipid nanoparticles (SLN, NLC) in cosmetic and pharmaceutical dermal products

Fabrication, appraisal, and transdermal permeation of sildenafil citrate-loaded nanostructured lipid carriers versus solid lipid nanoparticles

Although sildenafil citrate (SC) is used extensively for erectile dysfunction, oral delivery of SC encounters many obstacles. Furthermore, the physicochemical characteristics of this amphoteric drug are challenging for delivery system formulation and transdermal permeation. This article concerns the assessment of the potential of nanomedicine for improving SC delivery and transdermal permeation. SC-loaded nanostructured lipid carriers (NLCs) and solid lipid nanoparticles (SLNs) were fabricated using a modified high-shear homogenization technique. Nanoparticle optimization steps included particle size analysis, entrapment efficiency (EE) determination, freeze-drying and reconstitution, differential scanning calorimetry, in vitro release, stability study and high-performance liquid chromatography analysis. Transdermal permeation of the nanocarriers compared with SC suspension across human skin was assessed using a modified Franz diffusion cell assembly. Results revealed that SLNs and NLCs could be optimized in the nanometric range (180 and 100 nm, respectively) with excellent EE (96.7% and 97.5%, respectively). Nanoparticles have significantly enhanced in vitro release and transdermal permeation of SC compared with its suspensions. Furthermore, transdermal permeation of SC exhibited higher initial release from both SLN and NLC formulations followed by controlled release, with promising implications for faster onset and longer drug duration. Nanomedicines prepared exhibited excellent physical stability for the study period. Solid nanoparticles optimized in this study successfully improved SC characteristics, paving the way for an efficient topical Viagra^® product.

High throughput screening: an in silico solubility parameter approach for lipids and solvents in SLN preparations

OBJECTIVE

The present paper describes an in silico solubility behavior of drug and lipids, an essential screening study in preparation of solid lipid nanoparticles (SLN).

MATERIALS AND METHODS

Ciprofloxacin HCl was selected as a model drug along with 11 lipids and 5 organic solvents. In silico miscibility study of drug/lipid/solvent was performed using Hansen solubility parameter approach calculated by group contribution method of Van Krevelen and Hoftyzer. Predicted solubility was validated by determining solubility of lipids in various solvent at different temperature range, while miscibility of drug in lipids was determined by apparent solubility study and partition experiment.

RESULTS AND DISCUSSION

The presence of oxygen and OH functionality increases the polarity and hydrogen bonding possibilities of the compound which has reflected the highest solubility parameter values for Geleol and Capmul MCM C8. Ethyl acetate, Geleol and Capmul MCM C8 was identified as suitable organic solvent, solid lipid and liquid lipid respectively based on a solubility parameter approach which was in agreement with the result of an apparent solubility study and partition coefficient.

CONCLUSION

These works demonstrate the validity of solubility parameter approach and provide a feasible predictor to the rational selection of excipients in designing SLN formulation.

Development of a new delivery system consisting in "drug--in cyclodextrin--in nanostructured lipid carriers" for ketoprofen topical delivery

A new delivery system based on drug cyclodextrin (Cd) complexation and loading into nanostructured lipid carriers (NLC) has been developed to improve ketoprofen therapeutic efficacy. The proposed strategy exploits both the solubilizing and stabilizing properties of Cds and the prolonged release, high tolerability and percutaneous absorption enhancer properties of NLC. Two different polymeric Cds, i.e. β-Cd-epichlorohydrin polymer (EPI-βCd) and carboxymethylathed-β-Cd-epichlorohydrin polymer (EPI-CMβCd) were tested and two different techniques to obtain solid ketoprofen-polymeric Cd complexes (i.e. co-grinding and co-lyophilization) were compared, to investigate the influence of the preparation method on the physicochemical properties of the end product. EPI-βCd was more effective than EPI-CMβCd in enhancing the solubility and dissolution properties of ketoprofen. Co-grinding in dry conditions was the best preparation technique of solid drug-Cd systems, allowing obtainment of homogeneous amorphous particles of nanometric range. NLC consisting in a mixture of Compritol® 888 ATO (glyceryl behenate) and Labrafac Lipophile were obtained by ultrasonication. Both empty and loaded NLC were suitably characterized for particle size, pH, entrapment efficiency and drug release behavior. The best (drug-Cd)-loaded NLC system, formulated into a xanthan hydrogel, exhibited drug permeation properties clearly better than those of the plain drug suspension or the plain drug-loaded NLC, in virtue of the simultaneous exploitation of the solubilizing effect of cyclodextrin and the penetration enhancer properties of NLC.

Development of an itraconazole-loaded nanostructured lipid carrier (NLC) formulation for pulmonary application

Itraconazole-loaded NLC for pulmonary application were developed. In Precirol ATO 5 and oleic acid Itraconazole had the highest solubility. The solid lipid and the oil were mixable in a ratio 9:1 possessing a melting point above body temperature. 0.4% Itraconazole was dissolved in this lipid blend. Eumulgin SLM 20 was the stabilizer with the highest affinity to the lipid blend used as particle matrix. 2.5% Eumulgin SLM 20 was sufficient to obtain NLC with a narrow particle size distribution and sufficient stability. The tonicity of the formulation was adjusted with glycerol. Sterility was obtained by autoclaving. Neither the addition of glycerol nor autoclaving had an influence on the particle size and the zeta potential of Itraconazole-loaded NLC. SEM images showed spherical particles confirming the particle size measured by light scattering techniques. An entrapment efficiency of 98.78% was achieved. Burst release of Itraconazole from the developed carrier system was found. Itraconazole-loaded NLC possessed good storage stability. Nebulizing Itraconazole-loaded NLC with a jet stream and an ultrasonic nebulizer had no influence on the particle size and the entrapment efficiency of Itraconazole in the particle matrix, being a precondition for pulmonary application.

Stability of β-carotene in protein-stabilized oil-in-water delivery systems

Inclusion of liposoluble bioactive compounds in fortified foods represents a complex challenge due to the labile nature of such compounds and the instability of oil-in-water emulsion-based delivery systems. In the present study, dispersions prepared with 10% (w/w) sunflower oil (SO) or hydrogenated palm kernel oil (HPKO) containing 0.05% (w/w) β-carotene were stabilized by various concentrations of whey protein isolate (WPI) or sodium caseinate (NaCas) (0.1 to 2.0% w/w) in 30% (w/w) sucrose aqueous solutions. Physicochemical characterization of emulsions was done considering the particle size, the particle surface protein coverage, and the physical state of continuous and dispersed phases. Physical stability of the systems and their protection properties on β-carotene were compared. The lipid carrier type and interfacial structure were investigated as the two key factors which regulate the stability of labile lipophilic bioactive molecules in food model systems. Our results showed high β-carotene stability when O/W systems were stable (protein concentration ≥0.8% w/w.) A (partially) solid lipid carrier (HPKO) enhanced protection compared to the liquid carrier (SO) as the bioactive molecules were entrapped in isolated domains within the solid lattice and kept apart from reactive species in the surroundings. NaCas provided a better barrier than WPI due to the different amino acid composition and interface structure which significantly reduced β-carotene degradation rate.

Lipid nanocarriers (GeluPearl) containing amphiphilic lipid Gelucire 50/13 as a novel stabilizer: fabrication, characterization and evaluation for oral drug delivery

PURPOSE

To evaluate the ability of Gelucire 50/13 (an amphiphilic lipid excipient) to act as a stabilizer for lipid nanocarriers such as solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) and to establish the ability of Gelucire 50/13 based lipid nanocarriers to improve oral delivery of hydrophobic drugs using repaglinide (RPG) as a model drug.

METHODS

The ability of Gelucire 50/13 to nanosize various solid lipids was evaluated. The ability of Gelucire 50/13 to yield NLC was evaluated by using Precirol ATO 5 as a model solid lipid and various liquid lipids (oils). Gelucire 50/13 based NLC (GeluPearl) were evaluated for their ability to improve the efficacy of RPG on oral administration in comparison to RPG tablets. The short term stability of RPG-GeluPearl was evaluated at 25 °C/60% RH.

RESULTS

Gelucire 50/13 could successfully yield SLN and NLC of various solid lipids, demonstrating its potential to act as a novel stabilizer. DSC studies indicated that Gelucire 50/13 interacts with Precirol ATO 5 and this interaction suppresses polymorphic transitions of both the components. RPG-GeluPearl exhibited significantly higher anti-diabetic activity compared to marketed RPG tablets. RPG-GeluPearl demonstrated good colloidal and chemical stability at the end of 1 month.

Nanoparticles: small and mighty

The properties of engineered nanomaterials and nanoparticles such as zinc oxide and titanium dioxide may differ substantially from naturally occurring materials and particles. Nanoparticles have unique physical properties making them ideal for use in various skin care products currently on the market. Nano-preparations are currently under investigation as novel treatments of acne vulgaris, recurrent condyloma accuminata, atopic dermatitis, hyperpigmented skin lesions, and other non-dermatologic diseases. Because of their increased surface area, nanoparticles have increased reactivity and a small size allowing for enhanced mobility through the human body and environment. As their use becomes more prevalent, nanoparticles are being scrutinized for their safety and long-term effects. This review discusses the benefits of nanoparticles in dermatological therapies and skin care products as well as potential disadvantages and possible mechanisms of toxicity.

Nanoparticles and microparticles for skin drug delivery

Skin is a widely used route of delivery for local and systemic drugs and is potentially a route for their delivery as nanoparticles. The skin provides a natural physical barrier against particle penetration, but there are opportunities to deliver therapeutic nanoparticles, especially in diseased skin and to the openings of hair follicles. Whilst nanoparticle drug delivery has been touted as an enabling technology, its potential in treating local skin and systemic diseases has yet to be realised. Most drug delivery particle technologies are based on lipid carriers, i.e. solid lipid nanoparticles and nanoemulsions of around 300 nm in diameter, which are now considered microparticles. Metal nanoparticles are now recognized for seemingly small drug-like characteristics, i.e. antimicrobial activity and skin cancer prevention. We present our unpublished clinical data on nanoparticle penetration and previously published reports that support the hypothesis that nanoparticles >10nm in diameter are unlikely to penetrate through the stratum corneum into viable human skin but will accumulate in the hair follicle openings, especially after massage. However, significant uptake does occur after damage and in certain diseased skin. Current chemistry limits both atom by atom construction of complex particulates and delineating their molecular interactions within biological systems. In this review we discuss the skin as a nanoparticle barrier, recent work in the field of nanoparticle drug delivery to the skin, and future directions currently being explored.

Preparation and Characterization of Vitamin a Palmitate-Loaded Nanostructured Lipid Carriers as Delivery Systems for Food Products

Vitamin A Palmitate-loaded Nanostructured Lipid Carriers were prepared by High Pressure Homogenization (HPH) technique. The influences of storage conditions such as time and temperature on the physical and chemical storage stability of VAP-NLCs were studied in details. Preparation and physicochemical properties of VAP lipid nanoparticles were investigated using various analytical equipments such as TEM, photon correlation spectroscopy (PCS), laser diffractometry (LD) and ultraviolet spectrophotometer. The respective optimal HPH pressure and cycles were 70MPa and 5 cycles, so VAP-NLC dispersions under the optimized condition gave rise to the entrapment efficiency (EE) of 99.8%, PI of 0.234, mean diameter of 144±1.7 nm (2% VAP loading capacity). In addition, VAP lipid nanoparticle has a distinct spherical shape, its particle sizes were around 60–330 nm according to VAP contents and zeta potential values -18~-23 mV. Furthermore, the pH of VAP-NLC dispersion was near to 7.0. This study showed that VAP-NLC could hopefully be applied for food products.

Novel formulation and evaluation of a Q10-loaded solid lipid nanoparticle cream: in vitro and in vivo studies

Solid lipid nanoparticles (SLNs) of coenzyme Q10 (CoQ10) were formulated by a high-pressure homogenization method. The best formulation of SLN dispersion consisted of 13% lipid (cetyl palmitate or stearic acid), 8% surfactant (Tween 80 or Tego Care 450), and water. Stability tests, particle size analysis, differential scanning calorimetry, transmission electron microscopy, and release study were conducted to find the best formulation. A simple cream of CoQ10 and a cream containing CoQ10-loaded SLNs were prepared and compared on volunteers aged 20-30 years. SLNs with particle size between 50 nm and100 nm exhibited the most suitable stability. In vitro release profiles of CoQ10 from simple cream, SLN alone, and CoQ10-loaded SLN cream showed prolonged release for SLNs compared with the simple cream, whereas there was no significant difference between SLN alone and SLN in cream. In vitro release studies also demonstrated that CoQ10-loaded SLN and SLN cream possessed a biphasic release pattern in comparison with simple cream. In vivo skin hydration and elasticity studies on 25 volunteers suggested good dermal penetration and useful activity of Q10 on skin as a hydratant and antiwrinkle cream.

Engineering nanomedicines for improved melanoma therapy: progress and promises

Once metastatic, melanoma remains one of the most aggressive and morbid malignancies. Moreover, in past decades, the overall survival for advanced unresectable melanoma exhibited a constancy of poor prognosis. Low response rates and serious adverse effects have been characteristic of standard therapy based on a combination of chemotherapeutic agents or immunotherapy with IL-2. For example, the chemotherapy including dacarbazine, carmustin, cisplatin and tamoxifen is known as 'Dartmouth regimen' while the CVD regimen comprises carmustine, vinblastine and dacarbazine. Thus, there is an urgent and critical need to reformulate these bioactive agents using nanoscience and nanotechnology as alternative strategies. This article overviews current design and evaluation of nanomedicine undertaken to address this unmet medical need. The nanomedicines studied include polymeric nanoparticles, liposomes, polymersomes, dendrimers, cubosomes, niosomes and nanodiamonds. In this preclinical article, nanotechnology provides hope for effective treatment of this aggressive and largely treatment-resistant disease.

Nanotechnology and human health: risks and benefits

Nanotechnology is expected to be promising in many fields of medical applications, mainly in cancer treatment. While a large number of very attractive exploitations open up for the clinics, regulatory agencies are very careful in admitting new nanomaterials for human use because of their potential toxicity. The very active research on new nanomaterials that are potentially useful in medicine has not been counterbalanced by an adequate knowledge of their pharmacokinetics and toxicity. The different nanocarriers used to transport and release the active molecules to the target tissues should be treated as additives, with potential side effects of themselves or by virtue of their dissolution or aggregation inside the body. Only recently has a systematic classification of nanomaterials been proposed, posing the basis for dedicated modeling at the nanoscale level. The use of in silico methods, such as nano-QSAR and PSAR, while highly desirable to expedite and rationalize the following stages of toxicological research, are not an alternative, but an introduction to mandatory experimental work.

Recent advances in lipid nanoparticle formulations with solid matrix for oral drug delivery

Lipid nanoparticles based on solid matrix have emerged as potential drug carriers to improve gastrointestinal (GI) absorption and oral bioavailability of several drugs, especially lipophilic compounds. These formulations may also be used for sustained drug release. Solid lipid nanoparticle (SLN) and the newer generation lipid nanoparticle, nanostructured lipid carrier (NLC), have been studied for their capability as oral drug carriers. Biodegradable, biocompatible, and physiological lipids are generally used to prepare these nanoparticles. Hence, toxicity problems related with the polymeric nanoparticles can be minimized. Furthermore, stability of the formulations might increase than other liquid nano-carriers due to the solid matrix of these lipid nanoparticles. These nanoparticles can be produced by different formulation techniques. Scaling up of the production process from lab scale to industrial scale can be easily achieved. Reasonably high drug encapsulation efficiency of the nanoparticles was documented. Oral absorption and bioavailability of several drugs were improved after oral administration of the drug-loaded SLNs or NLCs. In this review, pros and cons, different formulation and characterization techniques, drug incorporation models, GI absorption and oral bioavailability enhancement mechanisms, stability and storage condition of the formulations, and recent advances in oral delivery of the lipid nanoparticles based on solid matrix will be discussed.

RGD-targeted paramagnetic liposomes for early detection of tumor: in vitro and in vivo studies

Magnetic resonance molecular imaging has emerged as a potential approach for tumor diagnosis in the last few decades. This approach consists of the delivery of MR contrast agents to the tumor by specific targeted carriers. For this purpose, a lipopeptide was constructed by using a cyclic RGD peptide headgroup coupled to palmitic acid anchors via a KGG tripeptide spacer. Targeted paramagnetic liposomes were then prepared by the incorporation of RGD-coupled-lipopeptides into lipid bilayers for specific bounding to tumor. In vitro, study demonstrated that RGD-targeted liposomes exhibited a better binding affinity to targeted cells than non-targeted liposomes. MR imaging of mice bearing A549 tumors with the RGD-targeted paramagnetic liposomes also resulted in a greater signal enhancement of tumor compared to non-targeted liposomes and pure contrast agents groups. In addition, biodistribution study also showed specific tumor targeting of RGD-targeted paramagnetic liposomes in vivo. Therefore, RGD-targeted paramagnetic liposomes prepared in the present study may be a more promising method for early tumor diagnosis.

The encapsulation effect of UV molecular absorbers into biocompatible lipid nanoparticles

The efficiency of a cosmetic product depends not only on the active ingredients, but also on the carrier system devoted to improve its bioavailability. This article aims to encapsulate two couples of UV molecular absorbers, with a blocking action on both UV-A and UV-B domains, into efficient lipid nanoparticles. The effect of encapsulation on the specific properties such as sun protection factor and photostability behaviour has been demonstrated. The lipid nanoparticles with size range 30-350 nm and a polydispersity index between 0.217 and 0.244 are obtained using a modified high shear homogenisation method. The nanoparticles had spherical shapes with a single crystallisation form of lipid matrices characteristic for the least ordered crystal structure (α-form). The in vitro determination of photoprotection has led to high SPF ratings, with values of about 20, which assure a good photoprotection and filtering about 95% of UV radiation. The photoprotection effect after irradiation stage was observed to be increased more than twice compared to initial samples as a result of isomerisation phenomena. All the results have shown that good photoprotection effect and improved photostability could be obtained using such sunscreen couples, thus demonstrating that UV absorbers-solid lipid nanoparticles are promising carriers for cosmetic formulations.

Solid lipid nanoparticles for ocular drug delivery

Ocular drug delivery remains challenging because of the complex nature and structure of the eye. Conventional systems, such as eye drops and ointments, are inefficient, whereas systemic administration requires high doses resulting in significant toxicity. There is a need to develop novel drug delivery carriers capable of increasing ocular bioavailability and decreasing both local and systemic cytotoxicity. Nanotechnology is expected to revolutionize ocular drug delivery. Many nano-structured systems have been employed for ocular drug delivery and yielded some promising results. Solid lipid nanoparticles (SLNs) have been looked at as a potential drug carrier system since the 1990s. SLNs do not show biotoxicity as they are prepared from physiological lipids. SLNs are especially useful in ocular drug delivery as they can enhance the corneal absorption of drugs and improve the ocular bioavailability of both hydrophilic and lipophilic drugs. SLNs have another advantage of allowing autoclave sterilization, a necessary step towards formulation of ocular preparations. This review outlines in detail the various production, characterization, sterilization, and stabilization techniques for SLNs. In-vitro and in-vivo methods to study the drug release profile of SLNs have been explained. Special attention has been given to the nature of lipids and surfactants commonly used for SLN production. A summary of previous studies involving the use of SLNs in ocular drug delivery is provided, along with a critical evaluation of SLNs as a potential ocular delivery system.

Formulation of a novel oxybenzone-loaded nanostructured lipid carriers (NLCs)

The objective of the current study was to formulate oxybenzone into nanostructured lipid carriers (NLCs) to enhance its sunscreening efficacy and safety. NLCs of oxybenzone were prepared by the solvent diffusion method. A complete 2(3) factorial design was used for the evaluation of the prepared oxybenzone NLCs. The study design involves the investigation of the effect of three independent variables namely liquid lipid type (Miglyol 812 and oleic acid), liquid lipid concentration (15% and 30%), and oxybenzone concentration (5% and 10% with respect to total lipids) on the particle size (p.s.) , the entrapment efficiency (EE%) and the in vitro drug release after 8 h. The prepared NLCs were spherical in overall shape and were below 0.8 microm. Miglyol 812 and 30% liquid lipid were found to significantly decrease the p.s. and increase the EE% when compared to oleic acid and 15% liquid lipid. Increasing oxybenzone concentration increased significantly the p.s. but did not affect the EE%. NLCs prepared using Miglyol 812, 15% liquid lipid, and 10% oxybenzone showed slower drug release when compared to those prepared using oleic acid, 30% liquid lipid, and 5% oxybenzone, respectively. The candidate oxybenzone-loaded NLC dispersion was then formulated into gel. The incorporation of oxybenzone into NLCs greatly increased the in vitro sun protection factor and erythemal UVA protection factor of oxybenzone more than six- and eightfold, respectively, while providing the advantage of overcoming side effects of free oxybenzone as evidenced by very low irritation potential.

Nanoparticulate strategies for effective delivery of poorly soluble therapeutics

The pharmacological activity of a drug molecule depends on its ability to dissolve and interact with its biological target, either through dissolution and absorption, or through dissolution and receptor interaction. The low bioavailability that characterizes poorly water-soluble drugs is usually attributed to the dissolution kinetic profile. Novel strategies to effectively deliver these drugs include nanoparticulate approaches that either increase the surface area of the drug or improve the solubility characteristics of the drug. Nanosizing approaches are based on the production of drug nanocrytals dispersed in an aqueous surfactant solution, whereas other possibilities include drug loading in nanoparticles. Promising nanoparticulate approaches include the development of lipid-based nanocarriers to increase drug solubility followed by enhanced bioavailability. To select the best approach there are, however, some critical considerations to take into account, for example the physicochemical properties of the drug, the possibility to scale-up the production process, the toxicological considerations of the use of solvents and cosolvents, the selection of an environmentally sustainable methodology and the development of a more patient-friendly dosage form. This article addresses these relevant questions and provides feasible examples of novel strategies with respect to relevant administration routes.

Preparation of uniform-sized multiple emulsions and micro/nano particulates for drug delivery by membrane emulsification

Much attention has in recent years been paid to fine applications of drug delivery systems, such as multiple emulsions, micro/nano solid lipid and polymer particles (spheres or capsules). Precise control of particle size and size distribution is especially important in such fine applications. Membrane emulsification can be used to prepare uniform-sized multiple emulsions and micro/nano particulates for drug delivery. It is a promising technique because of the better control of size and size distribution, the mildness of the process, the low energy consumption, easy operation and simple equipment, and amendable for large scale production. This review describes the state of the art of membrane emulsification in the preparation of monodisperse multiple emulsions and micro/nano particulates for drug delivery in recent years. The principles, influence of process parameters, advantages and disadvantages, and applications in preparing different types of drug delivery systems are reviewed. It can be concluded that the membrane emulsification technique in preparing emulsion/particulate products for drug delivery will further expand in the near future in conjunction with more basic investigations on this technique.

Preservation of nanostructured lipid carriers (NLC)

Due to their positive features (e.g., increased penetration of actives, re-enforcement of the lipid barrier and increase in skin hydration), nanostructured lipid carriers (NLC) are used in many dermal formulations. These formulations require preservation, and preservatives can impair the physical stability of disperse systems. Therefore, in this study, the influence of preservatives on the physical stability of Q10-loaded NLC was investigated using 11 different preservative mixtures. Whereas for nanosuspensions, only a limited number of preservatives are known from the literature not affecting their physical stability, a surprisingly high number of seven preservatives could be identified to be suitable for the preservation of NLC dispersions. For Q10-loaded NLC, Hydrolite 5 proved to be the best preservative, as it was found surprisingly to stabilize the NLC dispersion. Based on the data, a preservative classification system is suggested and a mechanistic model describing six key parameters affecting the physical stability of NLC could be developed. As most suitable characterization method to screen for suitable preservatives, light microscopy was identified. By being a simple, fast and cost efficient method, even extensive preservative screening studies can be performed very efficiently.

Translocation of cell penetrating peptide engrafted nanoparticles across skin layers

The objective of the current study was to evaluate the ability of cell penetrating peptides (CPP) to translocate the lipid payload into the skin layers. Fluorescent dye (DID-oil) encapsulated nano lipid crystal nanoparticles (FNLCN) were prepared using Compritol, Miglyol and DOGS-NTA-Ni lipids by hot melt homogenization technique. The FNLCN surface was coated with TAT peptide (FNLCNT) or control YKA peptide (FNLCNY) and in vitro rat skin permeation studies were performed using Franz diffusion cells. Observation of lateral skin sections obtained using cryotome with a confocal microscope demonstrated that skin permeation of FNLCNT was time dependent and after 24h, fluorescence was observed upto a depth of 120 microm which was localized in the hair follicles and epidermis. In case of FNLCN and FNLCNY formulations fluorescence was mainly observed in the hair follicles. This observation was further supported by confocal Raman spectroscopy where higher fluorescence signal intensity was observed at 80 and 120 microm depth with FNLCNT treated skin and intensity of fluorescence peaks was in the ratio of 2:1:1 and 5:3:1 for FNLCNT, FNLCN, and FNLCNY treated skin sections, respectively. Furthermore, replacement of DID-oil with celecoxib (Cxb), a model lipophilic drug showed similar results and after 24h, the CXBNT formulation increased the Cxb concentration in SC by 3 and 6 fold and in epidermis by 2 and 3 fold as compared to CXBN and CXBNY formulations respectively. Our results strongly suggest that CPP can translocate nanoparticles with their payloads into deeper skin layers.