Synthesis of Titania Nanosheets with a High Percentage of Exposed (001) Facets and Related Photocatalytic Properties

Titanium dioxide nanoswords with highly reactive, photocatalytic facets

Titanium dioxide (TiO(2)) is one of the most widely studied and important materials for catalysis, photovoltaics, and surface science applications, but the ability to consistently control the relative exposure of higher surface energy facets during synthesis remains challenging. Here, we present the repeatable synthesis of highly reactive, rutile {001} or {101} facets on broad, sword-shaped TiO(2) nanostructures rapidly synthesized in minutes. Growth occurs along planes of lower surface energy, repeatedly yielding nanostructures with large, high energy facets. The quantitative photocatalytic reactivity of the nanoswords, demonstrated by the photoreduction of silver, is over an order of magnitude higher than reference low energy TiO(2){110} substrates. Therefore, the higher surface energy dominated TiO(2) nanoswords are ideal structures for characterizing the physicochemical properties of rutile TiO(2), and may be used to enhance a variety of catalytic, optical, and clean-technology applications.

Anatase TiO(2) nanosheets with exposed (001) facets: improved photoelectric conversion efficiency in dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) are fabricated based on anatase TiO(2) nanosheets (TiO(2)-NSs) with exposed {001} facets, which were obtained by a simple one-pot hydrothermal route using HF as a morphology controlling agent and Ti(OC(4)H(9))(4) as precursor. The prepared samples were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, UV-vis absorption spectroscopy and N(2) adsorption-desorption isotherms. The photoelectric conversion performances of TiO(2)-NSs solar cells are also compared with TiO(2) nanoparticles (TiO(2)-NPs) and commercial-grade Degussa P25 TiO(2) nanoparticle (P25) solar cells at the same film thickness, and their photoelectric conversion efficiencies (η) are 4.56, 4.24 and 3.64%, respectively. The enhanced performance of the TiO(2)-NS solar cell is due to their good crystallization, high pore volume, large particle size and enhanced light scattering. The prepared TiO(2) nanosheet film electrode should also find wide-ranging potential applications in various fields including photocatalysis, catalysis, electrochemistry, separation, purification and so on.

Photodegradation of organic contamination in wastewaters by bonding TiO2/single-walled carbon nanotube composites with enhanced photocatalytic activity

Bonding TiO(2)/single-walled carbon nanotube (SWCNT) composites have been successfully synthesized through a facile sol-solvothermal technique. The obtained materials were characterized in detail by XRD, FT-IR, Raman and TEM. The results revealed that TiO(2) and SWNCT linked compactly through ester bonds and thus improved their interfaces. Therefore, the recombination of photogenerated electron-hole pairs was inhibited efficiently, which improved the photocatalytic activity. A reasonable mechanism was proposed to explain its formation. The photocatalytic activity was investigated utilizing rhodamine B and nitrobenzene (NB) as models for organic contamination in wastewaters. Experimental results indicated that this bonding composite exhibited higher photocatalytic activity than that of Degussa P25. The excellent photocatalytic activity could be attributed to larger surface area, smaller crystalline size, and especially the ester bonds, which was further confirmed by surface photovoltage spectroscopy. Furthermore, by adding ()OH scavenger tert-butanol, the obvious decrease of NB photodegradation indicated that NB was oxidized primarily by ()OH. The photodegradation products were identified by GC/MS, further indicating that the degradation proceeded via ()OH oxidation. A possible reaction pathway for the degradation of NB was suggested by the evidence presented in this study.

Fast-rate formation of TiO2 nanotube arrays in an organic bath and their applications in photocatalysis

In this work, 18.5 microm titanium oxide (TiO(2)) nanotube arrays were formed by the anodization of titanium (Ti) foil in ethylene glycol containing 1 wt% water and 5 wt% fluoride for 60 min at 60 V. The fast growth rate of the nanotube arrays at 308 nm min(-1) was achieved due to the excess fluoride content and the limited amount of water in ethylene glycol used for anodization. Limited water content and excess fluoride in ethylene glycol inhibited the formation of a thick barrier layer by increasing the dissolution rate at the bottom of the nanotubes. This eased the transport of titanium, fluorine and oxygen ions, and allowed the nanotubes to grow deep into the titanium foil. At the same time, the neutral condition offered a protective environment along the tube wall and pore mouth, which minimized lateral and top dissolution. Results from x-ray photoelectron spectra revealed that the TiO(2) nanotubes prepared in ethylene glycol contained Ti, oxygen (O) and carbon (C) after annealing. The photocatalytic activity of the nanotube arrays produced was evaluated by monitoring the degradation of methyl orange. Results indicate that a nanotube with an average diameter of 140 nm and an optimal tube length of 18.5 microm with a thin tube wall (20 nm) is the optimum structure required to achieve high photocatalytic reaction. In addition, the existence of carbon, high degree of anatase crystallinity, smooth wall and absence of fluorine enhanced the photocatalytic activity of the sample.

Large scale synthesis and gas-sensing properties of anatase TiO2 three-dimensional hierarchical nanostructures

Three-dimensional (3D) crystalline anatase titanium dioxide (TiO(2)) hierarchical nanostructures were synthesized through a facile and controlled hydrothermal and after-annealing process. The formation mechanism for the anatase TiO(2) 3D hierarchical nanostructures was investigated in detail. The 3D hierarchical nanostructures morphologies are formed by self-organization of several tens of radially distributed thin petals with a thickness of several nanometers with a larger surface area. The surface area of TiO(2) hierarchical nanostructures determined by the Brunauer-Emmett-Teller (BET) adsorption isotherms was measured to be 64.8 m(2) g(-1). Gas sensing properties based on the hierarchical nanostructures were investigated. A systematic study on sensitivity as a function of temperatures and gas concentrations was carried out. It reveals an improved ethanol gas sensing response property with a sensitivity of about 6.4 at 350 degrees C upon exposure to 100 ppm ethanol vapor for the TiO(2) hierarchical nanostructures. A gas sensing mechanism based on the adsorption-desorption of oxygen on the surface of TiO(2) is discussed and analyzed. This novel gas sensor can be multifunctional and promising for practical applications. Furthermore, the hierarchical nanostructures with high surface area can find variety of potential applications such as solar cells, biosensors, catalysts, etc.

Flower-like TiO2 nanostructures with exposed {001} facets: facile synthesis and enhanced photocatalysis

Flower-like TiO(2) nanostructures with exposed {001} facets were synthesized by a low-temperature hydrothermal process from Ti powders for the first time, and they exhibited enhanced photocatalytic degradation of methylene blue dye under ultraviolet light irradiation.

Facile synthesis of TiO2(B) crystallites/nanopores structure: a highly efficient photocatalyst

TiO(2)(B) was prepared by a facile green solvothermal method and further characterized by the powder X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), raman spectroscopy and nitrogen sorption analysis, and it has been found that the as-synthesized sample possesses a unique crystallites/nanopores structure and has a very large surface area (484 m(2) g(-1)). Surprisingly, it exhibits the very high photocatalytic activity and good stability for the decomposition of methyl orange (MO) compared to that of P25.

Surface properties and electronic structure of low-index stoichiometric anatase TiO(2) surfaces

Using the ultrasoft pseudopotential plane wave method, we present a systematic theoretical study of six low-index stoichiometric anatase TiO(2) surfaces, including (101), (100), (001), (103)(f), (103)(s) and (110) surfaces. We paid particular attention to their surface properties and electronic structure, including the surface band structure, layer-resolved density of states, surface electron distribution and electrostatic potential. After surface relaxation, the electrons in the dangling bond of surface atoms redistributed inwards, and the surface states changed correspondingly. So the surface energy was reduced and then stabilized. Based on these calculated results, one can better understand the selective activities of different anatase TiO(2) surfaces, and some relevant phenomena of TiO(2) nanoparticles.

Shape and size controlled synthesis of anatase nanocrystals with the assistance of ionic liquid

We report an ionic liquid (IL) assisted hydrothermal method to synthesize anatase TiO(2) nanocrystals (NCs), in which TiCl(4) was used as precursor, 1-butyl-3-methylimidazolium chloride (bmim(+)Cl(-)) as IL, and F(-) or SO(4)(2-) ions as phase transformation inhibitor. The surfactant-like nature of IL was found to play a key role in controlling the crystallization process via controlling the aggregation manner of the NCs. The fine-tuning abilities of the operating parameters of the bmim(+)Cl(-)/TiCl(4)/H(2)O system facilitated the controlling over the shape and size of TiO(2) NCs. Phase-pure anatase monodisperse NCs with various shape and size were controllably obtained. Moreover, the aggregation manners of anatase NCs were also studied, and it was demonstrated that the high concentration of HF or H(2)SO(4) could result in aggregation of anatase NCs to form pseudo single crystals.

Design, fabrication, and modification of nanostructured semiconductor materials for environmental and energy applications

Considerable effort has been made to design, fabricate, and manipulate nanostructured materials by innovative approaches. The precise control of nanoscale structures will pave the way not only for elucidating unique size/shape-dependent physicochemical properties but also for realizing new applications in science and technology. Nanotechnology offers unprecedented opportunities for improving our daily lives and the environment in which we live. This review mainly describes our recent progress in the design, fabrication, and modification of nanostructured semiconductor materials for environmental applications. Their potential applications in the field of energy are briefly introduced. The scope of this article covers a variety of semiconductor materials, focusing particularly on TiO(2)-based nanostructures (e.g., pure, doped, coupled, nanoporous, mesoporous, hierarchically porous, and ordered mesoporous TiO(2)). The preparation of nanoparticles, hierarchical nanoarchitectures, thin films, and single crystals by sol-gel, microemulsion, hydrothermal, sonochemical, microwave, photochemical, and nanocasting methods is discussed.

Synthesis of bismuth vanadate nanoplates with exposed {001} facets and enhanced visible-light photocatalytic properties

Well-defined m-BiVO₄ nanoplates with exposed highly active (001) faces were synthesized by a facile hydrothermal route, which exhibits greatly enhanced activity in the visible-light photocatalysis.

Shape-controlled synthesis of highly crystalline titania nanocrystals

A versatile synthetic method based on solvothermal technique has been developed for the fabrication of TiO(2) nanocrystals with different shapes such as rhombic, truncated rhombic, spherical, dog-bone, truncated and elongated rhombic, and bar. The central features of our approach are the use of water vapor as hydrolysis agent to accelerate the reaction and the use of both oleic acid and oleylamine as two distinct capping surfactants which have different binding strengths to control the growth of the TiO(2) nanoparticles. We also show that the presence of an appropriate amount of water vapor along with the desired oleic acid/oleylamine molar ratio plays a crucial role in controlling size and shape of TiO(2) nanocrystals.

Synthesis of anatase TiO2 nanocrystals with exposed {001} facets

This paper reports a facile synthesis of anatase TiO(2) nanocrystals with exposed, chemically active {001} facets. The nanocrystals were prepared by digesting electrospun nanofibers consisting of amorphous TiO(2) and poly(vinyl pyrrolidone) with an aqueous acetic acid solution (pH = 1.6), followed by hydrothermal treatment at 150 degrees C for 20 h. The as-obtained nanocrystals exhibited a truncated tetragonal bipyramidal shape with 9.6% of the surface being enclosed by {001} facets. The use of electrospinning is critical to the success of this synthesis as it allows for the generation of very small particles of amorphous TiO(2) to facilitate hydrothermal crystallization, an Ostwald ripening process. The morphology of the nanocrystals had a strong dependence on the pH value of the solution used for hydrothermal treatment. Low pH values tended to eliminate the {001} facets by forming sharp corners while high pH values favored the formation of a rodlike morphology through an oriented attachment mechanism. When acetic acid was replaced by inorganic acids, the TiO(2) nanocrystals further aggregated into larger structures with various morphologies.