Programmable fractal nanostructured interfaces for specific recognition and electrochemical release of cancer cells

An Acoustic Droplet-Induced Enzyme Responsive Platform for the Capture and On-Demand Release of Single Circulating Tumor Cells

The recovery of rare single circulating tumor cells (CTCs) from patients has great potential to facilitate the study of cell heterogeneity and cancer metastasis, which may promote the development of individualized cancer immunotherapy. Herein, a versatile single-cell recovery approach that utilizes an acoustic droplet-induced enzyme responsive platform for the capture and on-demand release of single CTCs is proposed. The platform combines a multifunctional enzyme-responsive gelatin nanoparticle (GNP)-decorated substrate (GNP-chip) for specific capture with an acoustic droplet positioning technique to realize on-demand release of single CTCs. The acoustic droplet dispenser is employed to generate oxidized alginate microdroplets containing the MMP-9 enzyme (OA-MMP-9) with controllable size and precise positioning upon the cell-attached GNP-chip, allowing controlled cell-surface biodegradation under enzymatic reactions followed by calcium chloride (CaCl₂) solution treatment to form single-cell encapsulated calcium alginate hydrogels. Benefitting from the existence of hydrogels, the released cells could be efficiently recovered by microcapillary. Results demonstrate that the encapsulated cells maintain good cell morphology in the hydrogels, which allow further single-cell nucleic acid analysis. As a proof-of-concept platform, this approach enables reliable and efficient retrieval of single CTCs and holds the potential for versatility in single-cell analysis systems.

In situ Ga-alloying in germanium nano-twists by the inhibition of fractal growth with fast Li+-mobility

In this study, Ge0.90Ga0.10 nano-twists were prepared by an in situ Ga-alloying method to inhibit the fractal growth of Ge. The mobility of Li+ in the Ge0.90Ga0.10 nano-twists was two orders higher than that in Ge. This advantage promotes fast charging of Li-ion batteries with the rate capability of 819 mA h g-1 at 16 A g-1.

Bioelectricity, Its Fundamentals, Characterization Methodology, and Applications in Nano-Bioprobing and Cancer Diagnosis

Bioelectricity is an essential characteristic of a biological system that has played an important role in medical diagnosis particularly in cancer liquid biopsy. However, its biophysical origin and measurements have presented great challenges in experimental methodologies. For instance, in dynamic cell processes, bioelectricity cannot be accurately determined as a static electrical potential via electrophoresis. Cancer cells fundamentally differ from normal cells by having a much higher rate of glycolysis resulting in net negative charges on cell surfaces. The most recent investigations on cancer cell surface charge that is the direct bio-electrical manifestation of the "Warburg Effect," which can be directly monitored by specially designed nanoprobes, has been provided. The most up-to-date research results from charge-mediated cell targeting are reviewed. Correlations between the cell surface charge and cancer cell metabolism are established based on cell/probe electrostatic interactions. Bioelectricity is utilized not only as an analyte for investigation of the metabolic state of the cancer cells, but also applied in electrostatically and magnetically capturing of the circulating tumor cells from whole blood. Also reviewed is on the isolation of Candida albicans via bioelectricity-driven nanoparticle binding on fungus with surface charges.

Photo-Irresponsive Molecule-Amplified Cell Release on Photoresponsive Nanostructured Surfaces

Cell manipulation has raised extensive concern owing to its underlying applications in numerous biological situations such as cell-matrix interaction, tissue engineering, and cell-based diagnosis. Generally, light is considered as a superior candidate for manipulating cells (e.g., cell release) due to their high spatiotemporal precision and non-invasion. However, it remains a big challenge to release cells with high efficiency due to their potential limitation of the light-triggered wettability transition on photoresponsive surfaces. In this study, we report a photoresponsive spiropyran-coated nanostructured surface that enables highly efficient release of cancer cells, amplified by the introduction of a photo-irresponsive molecule. On one hand, structural recognition stems from topological interaction between nanofractal surfaces and the protrusions of cancer cells. On the other, molecular recognition can be amplified by a photo-irresponsive and hydrophilic molecule by reducing the steric hindrance of photoresponsive components and resisting nonspecific cell adhesion. Therefore, this study may afford a novel avenue for developing advanced smart materials for high-quality biological analysis and clinical diagnosis.

Gold nanostructure microelectrode arrays for in vitro recording and stimulation from neuronal networks

An ideal microelectrode array (MEA) design should include materials and structures which exhibit biocompatibility, low electrode polarization, low impedance/noise, and structural durability. Here, the fabrication of MEAs with indium tin oxide (ITO) electrodes deposited with self-similar gold nanostructures (GNS) is described. We show that fern leaf fractal-like GNS deposited on ITO electrodes are conducive for neural cell attachment and viability while reducing the interfacial impedance more than two orders of magnitude at low frequencies (100-1000 Hz) versus bare ITO. GNS MEAs, with low interfacial impedance, allowed the detection of extracellular action potentials with excellent signal-to-noise ratios (SNR, 20.26 ± 2.14). Additionally, the modified electrodes demonstrated electrochemical and mechanical stability over 29 d in vitro.

Capture and "self-release" of circulating tumor cells using metal-organic framework materials

Capturing circulating tumor cells (CTCs) from peripheral blood for subsequent analyses has shown potential in precision medicine for cancer patients. Broad as the prospect is, there are still some challenges that hamper its clinical applications. One of the challenges is to maintain the viability of the captured cells during the capturing and releasing processes. Herein, we have described a composite material that could encapsulate a magnetic Fe3O4 core in a MIL-100 shell (MMs), which could respond to pH changes and modify the anti-EpCAM antibody (anti-EpCAM-MMs) on the surface of MIL-100. After the anti-EpCAM-MMs captured the cells, there was no need for additional conditions but with the acidic environment during the cell culture process, MIL-100 could realize automatic degradation, leading to cell self-release. This self-release model could not only improve the cell viability, but could also reduce the steps of the release process and save human and material resources simultaneously. In addition, we combined clinical patients' case diagnosis with the DNA sequencing and next generation of RNA sequencing technologies in the hope of precision medicine for patients in the future.

DNA-mediated reversible capture and release of circulating tumor cells with a multivalent dual-specific aptamer coating network

DNA-triggered reversible isolation and recovery of circulating tumor cells (CTCs) is presented based on a multivalent dual-specific aptamer-tethered rolling circle amplification (MA-RCA) network. The multivalent binding sites endow the MA-RCA network with a strong binding ability towards CTCs, and the repeated cell capture/release processes are also actualized in a noninvasive manner.

Size-matching hierarchical micropillar arrays for detecting circulating tumor cells in breast cancer patients' whole blood

Circulating tumor cells (CTCs) are important markers for cancer diagnosis and treatment, but it is still a challenge to recognize and isolate CTCs because they are very rare in the blood. To selectively recognize CTCs and improve the capture efficiency, micro/nanostructured substrates have been fabricated for this application; however the size of CTCs is often ignored in designing and engineering micro/nanostructured substrates. Herein, a spiky polymer micropillar array is fabricated for capturing CTCs with high efficiency. The surface of the micropillar is cactus-like, and is composed of nanospikes. This hierarchical polymer array is designed according to the size of CTCs, which allows for more interactions of the CTCs with the array by setting the size of gaps among the micropillars to match with the CTCs. This polymer array is created by molding on an ordered silicon array, and then it is coated with an antiepithelial cell adhesion molecule antibody (anti-EpCAM). After co-culture with MCF-7 cells for 45 min, the capture efficiency of this array for CTCs is up to 91% ± 2%. Moreover, the anti-EpCAM modified polymer micropillar arrays present an excellent capacity to isolate CTCs from the whole blood samples of breast cancer patients. This study may provide a new concept for capturing target cells by designing and engineering micro/nanostructured substrates according to the size of target cells.

Topography-Induced Cell Self-Organization from Simple to Complex Aggregates

Self-organization is a fundamental and indispensable process in a living system. To understand cell behavior in vivo such as tumorigenesis, 3D cellular aggregates, instead of 2D cellular sheets, have been employed as a vivid in vitro model for self-organization. However, most focus on the macroscale wetting and fusion of cellular aggregates. In this study, it is reported that self-organization of cells from simple to complex aggregates can be induced by multiscale topography through confined templates at the macroscale and cell interactions at the nanoscale. On the one hand, macroscale templates are beneficial for the organization of individual cells into simple and complex cellular aggregates with various shapes. On the other hand, the realization of these macro-organizations also depends on cell interactions at the nanoscale, as demonstrated by the intimate contact between nanoscale pseudopodia stretched by adjacent frontier cells, much like holding hands and by the variation in the intermolecular interactions based on E-cadherin. Therefore, these findings may be very meaningful for clarifying the organizational mechanism of tumor development, tissue engineering and regenerative medicine.

Biosensor Applications of Electrodeposited Nanostructures

The development of biosensors for a range of analytes from small molecules to proteins to oligonucleotides is an intensely active field. Detection methods based on electrochemistry or on localized surface plasmon responses have advanced through using nanostructured electrodes prepared by electrodeposition, which is capable of preparing a wide range of different structures. Supported nanoparticles can be prepared by electrodeposition through applying fixed potentials, cycling potentials, and fixed current methods. Nanoparticle sizes, shapes, and surface densities can be controlled, and regular structures can be prepared by electrodeposition through templates. The incorporation of multiple nanomaterials into composite films can take advantage of the superior and potentially synergistic properties of each component. Nanostructured electrodes can provide supports for enzymes, antibodies, or oligonucleotides for creating sensors against many targets in areas such as genomic analysis, the detection of protein antigens, or the detection of small molecule metabolites. Detection can also be performed using electrochemical methods, and the nanostructured electrodes can greatly enhance electrochemical responses by carefully designed schemes. Biosensors based on electrodeposited nanostructures can contribute to the advancement of many goals in bioanalytical and clinical chemistry.

Bioinspired Engineering of a Multivalent Aptamer-Functionalized Nanointerface to Enhance the Capture and Release of Circulating Tumor Cells

Circulating tumor cell (CTC)-enrichment by using aptamers has a number of advantages, but the issue of compromised binding affinities and stabilities in real samples hinders its wide applications. Inspired by the high efficiency of the prey mechanism of the octopus, we engineered a deterministic lateral displacement (DLD)-patterned microfluidic chip modified with multivalent aptamer-functionalized nanospheres (AP-Octopus-Chip) to enhance capture efficiency. The multivalent aptamer-antigen binding efficiency improves 100-fold and the capture efficiency is enhanced more than 300 % compared with a monovalent aptamer-modified chip. Moreover, the captured cancer cells can be released through a thiol exchange reaction with up to 80 % efficiency and 96 % viability, which is fully compatible with downstream mutation detection and CTC culture. Using the chip, we were able to find CTCs in all cancer samples analyzed.

Cell-imprinted biomimetic interface for intelligent recognition and efficient capture of CTCs

Synergistically contributing to plastic and natural antibodies, a cell-imprinted biomimetic interface exhibited high sensitivity and efficiency in CTC capture, providing novel insight into cell–biointerface interactions.

Multifunctional luminescent immuno-magnetic nanoparticles: toward fast, efficient, cell-friendly capture and recovery of circulating tumor cells

Highly efficient isolation and recovery of viable circulating tumor cells (CTCs) from the blood of patients is an important precondition to address the current dilemma of insufficient CTC studies, and can promote the development of individualized antitumor therapies. Herein, a cell-friendly CTC isolation and recovery nanoplatform with luminescent labelling was established using a layer-by-layer (LbL) assembly technique and a stimulated cellular-release strategy. In particular, the anti-epithelial cell adhesion molecule (anti-EpCAM) antibody was introduced with a disulfide bond-containing linker for further bio-friendly recovery of the CTCs. Quantum dots (QDs) were deposited onto fast magnet-responsive Fe₃O₄ nanoparticles through a facile LbL assembly method to monitor the capture and recovery process in real time. The obtained PEGlyated immuno-magnetic nanospheres (PIMNs) can all be magnetically collected within 2 min. Capture efficiencies above 90% can be achieved from blood samples with 5-200 CTCs per mL after only 1-2 min incubation. Nearly all PIMNs on the surface of the CTCs were detached after 15 min of glutathione (GSH) treatment with the disappearance of QD signals. Recovered CTCs could be directly used for culture (cell viability, ∼98%), and their invasiveness and migration characteristics remained unchanged. Furthermore, the PIMNs were successfully applied to isolate CTCs in cancer patients' peripheral blood samples, and an average of 8.6 ± 5.8 CTCs per mL was detected. The results above suggested that PIMNs may serve as a powerful nanoplatform for CTC screening, isolation and recovery.

Recent Progress in Isolation and Detection of Extracellular Vesicles for Cancer Diagnostics

Extracellular vesicles (EVs) are emerging as one of the many new and promising biomarkers for liquid biopsy of cancer due to their loading capability of some specific proteins and nucleic acids that are closely associated with cancer states. As such, the isolation and detection of cancer-derived EVs offer important information in noninvasive diagnosis of early-stage cancer and real-time monitoring of cancer development. In light of the importance of EVs, over the last decade, researchers have made remarkable innovations to advance the development of EV isolation and detection methods by taking advantage of microfluidics, biomolecule probes, nanomaterials, surface plasmon, optics, and so on. This review introduces the basic properties of EVs and common cancer-derived EV ingredients, and provides a comprehensive overview of EV isolation and detection strategies, with emphasis on liquid biopsies of EVs for cancer diagnostics.

Sialic Acid-Functionalized pH-Triggered Micelles for Enhanced Tumor Tissue Accumulation and Active Cellular Internalization of Orthotopic Hepatocarcinoma

Both targeted and stimuli-sensitive drug-delivery systems (DDSs) have been developed to augment antitumor effects. However, lack of knowledge regarding tumor tissue targeting and different effects of the stimuli-sensitive DDSs in orthotropic and ectopic tumors have impeded further advances in their clinical applications. Herein, we first reported a pH-triggered micelle with sialic acid (SA)-driven targeting ability (SA-poly(ethylene glycol)-hydrazone linker-doxorubicin (DOX), SPD). The SPD micelles encapsulated with DOX (SPDD) showed sustained drug release over 48 h in response to the pH gradient in vivo, slow under physical conditions and accelerated in the acid tumor microenvironment. In addition, the SPD micelles showed 2.3-fold higher accumulation in tumors after 48 h compared to the micelles lacking the SA moiety. The overexpression of E-selectin on the inflammatory vascular endothelial cells surrounding the tumors increased the accumulation of SPD micelles in tumor tissues, whereas that on the tumor cells increased the internalization of micelles. Consequently, SPDD micelles exerted remarkable antitumor effects in both orthotopic and ectopic models. Application of SPDD micelles in the in situ model reduced the tumor volume (77.57 mm³ vs 62.13 mm³) and metastasis after treatment for 25 days. These results suggest that SA-driven targeted DDS with a pH-responsive switch has the potential to treat hepatocarcinoma effectively both ectopically and orthotopically.

Enhanced capture and release of circulating tumor cells using hollow glass microspheres with a nanostructured surface

Self-floating hollow glass microspheres (HGMS) modified with tumor-specific antibodies have been developed for the capture of circulating tumor cells (CTCs), and have demonstrated effective cell isolation and good viability of isolated cancer cells. However, the capture efficiency decreases dramatically if the spiked cell concentration is low, possibly due to insufficient interactions between cancer cells and the HGMS surface. In order to apply HGMS-based CTC isolation to clinically relevant samples, it is desirable to create nanostructures on the surface of HGMS to enhance cell-surface interactions. Nevertheless, current microfabrication methods cannot generate nanostructured-surfaces on microspheres. The authors have developed a new HGMS with a controlled nanotopographical surface structure (NSHGMS), and demonstrated isolation and recovery of rare cancer cells. NSHGMS are achieved by applying layer-by-layer (LbL) assembly of negatively charged SiO2 nanoparticles and positively charged poly-l-arginine molecules, then sheathing the surface with an enzymatically degradable LbL film made from biotinylated alginate and poly-l-arginine, and capping with anti-EpCAM antibodies and anti-fouling PEG molecules. Compared to smooth-surfaced HGMS, NSHGMS showed shorter isolation time (20 min), enhanced capture efficiency (93.6 ± 4.9%) and lower detection limit (30 cells per mL) for commonly used cancer cell lines (MCF7, SK-BR-3, PC-3, A549 and CCRF-CEM). This NSHGMS-based CTC isolation method does not require specialized lab equipment or an external power source, and thus, can be used for the separation of targeted cells from blood or other body fluids in a resource-limited environment.

Programming biosensing sensitivity by controlling the dimension of nanostructured electrode

Development of new nanostructured materials has shown high impact for improving the performance of chemical and biological sensors. In this work, we show that by controlling the dimensions of the gold flower microelectrode (GFME), it is possible to regulate detection sensitivity of a sensor for rapid analysis of chemical species. A ~13-fold increase in sensitivity was achieved by enlarging the dimension of GFMEs from 70 to 330 μm, whereas the response dynamics are dimension-independent, with the signal attaining saturation ~20 s. Due to the intrinsic nanostructure on the microelectrode surface, our GFME exhibits excellent anti-interference property when applied to detect dopamine (DA) in the presence of 10-fold excess of ascorbic acid (AA). The regulable sensitivity, fast response dynamics, and excellent anti-interference property will make GFME an ideal sensing platform for biomedical applications. Graphical abstract ᅟ.

A Hierarchical 3D Nanostructured Microfluidic Device for Sensitive Detection of Pathogenic Bacteria

Efficient capture and rapid detection of pathogenic bacteria from body fluids lead to early diagnostics of bacterial infections and significantly enhance the survival rate. We propose a universal nano/microfluidic device integrated with a 3D nanostructured detection platform for sensitive and quantifiable detection of pathogenic bacteria. Surface characterization of the nanostructured detection platform confirms a uniform distribution of hierarchical 3D nano-/microisland (NMI) structures with spatial orientation and nanorough protrusions. The hierarchical 3D NMI is the unique characteristic of the integrated device, which enables enhanced capture and quantifiable detection of bacteria via both a probe-free and immunoaffinity detection method. As a proof of principle, we demonstrate probe-free capture of pathogenic Escherichia coli (E. coli) and immunocapture of methicillin-resistant-Staphylococcus aureus (MRSA). Our device demonstrates a linear range between 50 and 10⁴ CFU mL^-1 , with average efficiency of 93% and 85% for probe-free detection of E. coli and immunoaffinity detection of MRSA, respectively. It is successfully demonstrated that the spatial orientation of 3D NMIs contributes in quantifiable detection of fluorescently labeled bacteria, while the nanorough protrusions contribute in probe-free capture of bacteria. The ease of fabrication, integration, and implementation can inspire future point-of-care devices based on nanomaterial interfaces for sensitive and high-throughput optical detection.

Dual-Responsive Self-Assembled Monolayer for Specific Capture and On-Demand Release of Live Cells

We report a dual-responsive self-assembled monolayer (SAM) on a well-defined rough gold substrate for dynamic capture and release of live cells. By incorporating 5'-triphosphate (ATP) aptamer into a SAM, we can accurately isolate specific cell types and subsequently release captured cells at either population or desired-group (or even single-cell) levels. On one hand, the whole SAMs can be disassembled through addition of ATP solution, leading to the entire release of the captured cells from the supported substrate. On the other hand, desired cells can be selectively released using near-infrared light irradiation, with relatively high spatial and temporal precision. The proposed dual-responsive cell capture-and-release system is biologically friendly and is reusable with another round of modification, showing great usefulness in cancer diagnosis and molecular analysis.

Frosted Slides Decorated with Silica Nanowires for Detecting Circulating Tumor Cells from Prostate Cancer Patients

Developing low-cost and highly efficient nanobiochips are important for liquid biopsies, real-time monitoring, and precision medicine. By in situ growth of silica nanowires on a commercial frosted slide, we develop a biochip for effective circulating tumor cells (CTCs) detection after modifying epithelial cell adhesion molecule antibody (anti-EpCAM). The biochip shows the specificity and high capture efficiency of 85.4 ± 8.3% for prostate cancer cell line (PC-3). The microsized frosted slides and silica nanowires allow enhanced efficiency in capture EpCAM positive cells by synergistic topographic interactions. And the capture efficiency of biochip increased with the increase of silica nanowires length on frosted slide. The biochip shows that micro/nanocomposite structures improve the capture efficiency of PC-3 more than 70% toward plain slide. Furthermore, the nanobiochip has been successfully applied to identify CTCs from whole blood specimens of prostate cancer patients. Thus, this frosted slide-based biochip may provide a cheap and effective way of clinical monitoring of CTCs.

Synergistic Lysosomal Activatable Polymeric Nanoprobe Encapsulating pH Sensitive Imidazole Derivative for Tumor Diagnosis

Developing optical tumor imaging probes with minimal background noise is very important for its early detection of small lesions and accurate diagnosis of cancer. To overcome the bottleneck of low signal to noise ratio and sensitivity, it needs further improvement in fluorescent probe design and understanding of tumor development process. Recent reports reveal that lysosome's acidity in cancer cells can be below 4.5 with high Na⁺ /H⁺ exchange activity, which makes it an ideal target intracellular organelle for cancer diagnosis based on the variation of pH. Herein, a boron 2-(2'-pyridyl) imidazole complex derivative (BOPIM-N) is developed, with the ability to show a pH-activatable "OFF-ON" fluorescent switch by inhibiting twisted intramolecular charge transfer upon protonation at pH 3.8-4.5, which is studied for its selective viable cancer cell imaging ability in both in vitro and in vivo experiments. Interestingly, BOPIM-N can specifically emit green fluorescence in lysosomes of cancer cells, indicating its promising cancer cell specific imaging ability. More importantly, nanoformulated BOPIM-N probes can be specifically light-ON in tumor bearing site of nude mice with resolution up to cellular level, indicating its potential application in tumor diagnosis and precision medicine.

Gelatin Nanoparticle-Coated Silicon Beads for Density-Selective Capture and Release of Heterogeneous Circulating Tumor Cells with High Purity

Background: Circulating tumor cells (CTCs) are a burgeoning topic in cancer biomarker discovery research with minimal invasive blood draws. CTCs can be used as potential biomarkers for disease prognosis, early cancer diagnosis and pharmacodynamics. However, the extremely low abundance of CTCs limits their clinical utility because of technical challenges such as the isolation and subsequent detailed molecular and functional characterization of rare CTCs from patient blood samples.

Methods: In this study, we present a novel density gradient centrifugation method employing biodegradable gelatin nanoparticles coated on silicon beads for the isolation, release, and downstream analysis of CTCs from colorectal and breast cancer patients.

Results: Using clinical patient/spiked samples, we demonstrate that this method has significant CTC-capture efficiency (>80%) and purity (>85%), high CTC release efficiency (94%) and viability (92.5%). We also demonstrate the unparalleled robustness of our method in downstream CTC analyses such as the detection of PIK3CA mutations.

Conclusion: The efficiency and versatility of the multifunctional density microbeads approach provides new opportunities for personalized cancer diagnostics and treatments.

Electrochemical biosensor for cancer cell detection based on a surface 3D micro-array

The detection of rare circulating tumour cells (CTCs) in patients' blood is crucial for the early diagnosis of cancer, highly precise cancer therapy and monitoring therapeutic outcomes in real time. In this study we have developed an efficient strategy to capture and detect CTCs from the blood of cancer patients using a benzoboric acid modified gold-plated polymeric substrate with a regular 3D surface array. Compared with the smooth substrate, the substrate with the surface 3D microarrays exhibited a higher capture efficiency, i.e. 3.8 times that afforded by the smooth substrate. Additionally, due to the reversible reaction between the benzoboric acid on the 3D microarray and the sialic acid on CTCs, our strategy allowed for easy detachment of the captured CTCs from the substrate without causing critical damage to the cells. This will be of benefit for gaining further access to these rare cells for downstream characterization. The proposed strategy provides several advantages, including enhanced capture efficiency, high sensitivity, low cost and recovery of isolated CTCs, and could become a promising platform for early stage diagnosis of cancer.

Self-Sterilizing and Regeneratable Microchip for the Precise Capture and Recovery of Viable Circulating Tumor Cells from Patients with Cancer

Cancer cells metastasize and are transported in the bloodstream, easily reaching any site in the body through the blood circulation. A method designed to assess the number of circulating tumor cells (CTCs) should be validated as a clinical tool for predicting the response to therapy and monitoring the disease progression in patients with cancer. Although CTCs are detectable in many cases, they remain unavailable for clinic usage because of their high testing cost, tedious operation, and poor clinical relevance. Herein, we developed a regeneratable microchip for isolating CTCs, which is available for robust cell heterogeneity assays on-site without the need for a sterile environment. The ivy-like hierarchical roughened zinc oxide (ZnO) nanograss interface was synthesized and directly integrated into the microfluidic devices and enables effective CTC capture and flexible, nontoxic CTC release during incubation in a mildly acidic solution, thus enabling cellular and molecular analyses. The microchip can be regenerated and recycled to capture CTCs with the remaining ZnO without affecting the efficiency, even after countless cycles of cell release. Moreover, microbial infection is avoided during its storage, distribution, and even in the open space usage, which ideally appeals to the demands of point-of-care (POC) and home testing and meets to the requirements for blood examinations in undeveloped or resource-limited settings. Furthermore, the findings generated using this platform based on the cocktail of antiepithelial cell adhesion molecule and antivimentin antibodies indicate that CTC capture was more precise and reasonable for patients with advanced cancer.

TiO2 Nanorod Arrays with Mesoscopic Micro-Nano Interfaces for in Situ Regulation of Cell Morphology and Nucleus Deformation

Cell morphology and nucleus deformation are important when circulating tumor cells break away from the primary tumor and migrate to a distant organ. Cells are sensitive to the microenvironment and respond to the cell-material interfaces. We fabricated TiO₂ nanorod arrays with mesoscopic micro-nano interfaces through a two-step hydrothermal reaction method to induce severe changes in cell morphology and nucleus deformation. The average size of the microscale voids was increased from 5.1 to 10.5 μm when the hydrothermal etching time was increased from 3 to 10 h, whereas the average distances between voids were decreased from 0.88 to 0.40 μm. The nucleus of the MCF-7 cells on the TiO₂ nanorod substrate that was etched for 10 h exhibited a significant deformation, because of the large size of the voids and the small distance between voids. Nucleus defromation was reversible during the cells proliferate process when the cells were cultured on the mesoscopic micro-nano interface.This reversible process was regulated by combining of the uniform pressure applied by the actin cap and the localized pressure applied by the actin underneath the nucleus. Cell morphology and nucleus shape interacted with each other to adapt to the microenvironment. This mesoscopic micro-nano interface provided a new insight into the cell-biomaterial interface to investigate cell behaviors.

Manipulating cell fate: dynamic control of cell behaviors on functional platforms

We review the recent advances and new horizons in the dynamic control of cell behaviors on functional platforms and their applications.

Highly efficient isolation and release of circulating tumor cells based on size-dependent filtration and degradable ZnO nanorods substrate in a wedge-shaped microfluidic chip

Circulating tumor cells (CTCs) have been regarded as the major cause of metastasis, holding significant insights for tumor diagnosis and treatment. Although many efforts have been made to develop methods for CTC isolation and release in microfluidic system, it remains significant challenges to realize highly efficient isolation and gentle release of CTCs for further cellular and bio-molecular analyses. In this study, we demonstrate a novel method for CTC isolation and release using a simple wedge-shaped microfluidic chip embedding degradable znic oxide nanorods (ZnNRs) substrate. By integrating size-dependent filtration with degradable nanostructured substrate, the capture efficiencies over 87.5% were achieved for SKBR3, PC3, HepG2 and A549 cancer cells spiked in healthy blood sample with the flow rate of 100 μL min^-1. By dissolving ZnNRs substrate with an extremely low concentration of phosphoric acid (12.5 mM), up to 85.6% of the captured SKBR3 cells were released after reverse injection with flow rate of 100 μL min^-1 for 15 min, which exhibited around 73.6% cell viability within 1 h after release to around 93.9% after re-cultured for 3 days. It is conceivable that our microfluidic device has great potentials in carrying on cell-based biomedical studies and guiding individualized treatment in the future.

Highly Efficient Capture and Electrochemical Release of Circulating Tumor Cells by Using Aptamers Modified Gold Nanowire Arrays

The effective capture and release of circulating tumor cells (CTCs) is of significant importance in cancer prognose and treatment. Here we report a highly efficient method to capture and release human leukemic lymphoblasts (CCRF-CEM) using aptamers modified gold nanowire arrays (AuNWs). The gold nanowires, showing tunable morphologies from relatively random pillar deposit to relatively uniform arrays, were fabricated by electrochemical deposition using anodic aluminum oxide (AAO) as template. Upon simply being modified with aptamers by Au-S chemistry, the AuNWs exhibit higher specificity to target cells. Also compared to flat gold substrate, the AuNWs with nanostructure can capture target cells with much higher capture yield. Moreover, the captured CCRF-CEM cells can be released from AuNWs efficiently with little damage through an electrochemical desorption process. We predict that our strategy has great potential in providing a simple and economical platform for CTCs isolation, cancer diagnosis, and therapy.

DNA Hydrogel with Aptamer-Toehold-Based Recognition, Cloaking, and Decloaking of Circulating Tumor Cells for Live Cell Analysis

Circulating tumor cells (CTCs) contain molecular information on the primary tumor and can be used for predictive cancer diagnostics. Capturing rare live CTCs and their quantification in whole blood remain technically challenging. Here we report an aptamer-trigger clamped hybridization chain reaction (atcHCR) method for in situ identification and subsequent cloaking/decloaking of CTCs by porous DNA hydrogels. These decloaked CTCs were then used for live cell analysis. In our design, a DNA staple strand with aptamer-toehold biblocks specifically recognizes epithelial cell adhesion molecule (EpCAM) on the CTC surface that triggers subsequent atcHCR via toehold-initiated branch migration. Porous DNA hydrogel based-cloaking of single/cluster of CTCs allows capturing of living CTCs directly with minimal cell damage. The ability to identify a low number of CTCs in whole blood by DNA hydrogel cloaking would allow high sensitivity and specificity for diagnosis in clinically relevant settings. More significantly, decloaking of CTCs using controlled and defined chemical stimuli can release living CTCs without damages for subsequent culture and live cell analysis. We expect this liquid biopsy tool to open new powerful and effective routes for cancer diagnostics and therapeutics.

Three-Dimensional Inverse Opal Photonic Crystal Substrates toward Efficient Capture of Circulating Tumor Cells

Artificial fractal structures have attracted considerable scientific interest in circulating tumor cells (CTCs) detection and capture, which plays a pivotal role in the diagnosis and prognosis of cancer. Herein, we designed a bionic TiO₂ inverse opal photonic crystal (IOPC) structure for highly efficient immunocapture of CTCs by combination of a magnetic Fe₃O₄@C6@silane nanoparticles with anti-EpCAM (antiepithelial cell adhesion molecule) and microchannel structure. Porous structure and dimension of IOPC TiO₂ can be precisely controlled for mimicking cellular components, and anti-EpCAM antibody was further modified on IOPC interface by conjugating with polydopamine (PDA). The improvement of CTCs capture efficiency reaches a surprising factor of 20 for the IOPC interface compared to that on flat glass, suggesting that the IOPCs are responsible for the dramatic enhancement of the capture efficiency of MCF-7 cells. IOPC substrate with pore size of 415 nm leads to the optimal CTCs capture efficiency of 92% with 1 mL/h. Besides the cell affinity, IOPCs also have the advantage of light scattering property which can enhance the excitation and emission light of fluorescence labels, facilitating the real-time monitoring of CTCs capture. The IOPC-based platform demonstrates excellent performance in CTCs capture, which will take an important step toward specific recognition of disease-related rare cells.

Bioinspired Pollen-Like Hierarchical Surface for Efficient Recognition of Target Cancer Cells

The efficient recognition and isolation of rare cancer cells holds great promise for cancer diagnosis and prognosis. In nature, pollens exploit spiky structures to realize recognition and adhesion to stigma. Herein, a bioinspired pollen-like hierarchical surface is developed by replicating the assembly of pollen grains, and efficient and specific recognition to target cancer cells is achieved. The pollen-like surface is fabricated by combining filtering-assisted assembly and soft lithography-based replication of pollen grains of wild chrysanthemum. After modification with a capture agent specific to cancer cells, the pollen-like surface enables the capture of target cancer cells with high efficiency and specificity. In addition, the pollen-like surface not only assures high viability of captured cells but also performs well in cell mixture system and at low cell density. This study represents a good example of constructing cell recognition biointerfaces inspired by pollen-stigma adhesion.

A Nanostructured Microfluidic Immunoassay Platform for Highly Sensitive Infectious Pathogen Detection

Rapid and simultaneous detection of multiple potential pathogens by portable devices can facilitate early diagnosis of infectious diseases, and allow for rapid and effective implementation of disease prevention and treatment measures. The development of a ZnO nanorod integrated microdevice as a multiplex immunofluorescence platform for highly sensitive and selective detection of avian influenza virus (AIV) is described. The 3D morphology and unique optical property of the ZnO nanorods boost the detection limit of the H5N2 AIV to as low as 3.6 × 103 EID50 mL-1 (EID50 : 50% embryo infectious dose), which is ≈22 times more sensitive than conventional enzyme-linked immunosorbent assay. The entire virus capture and detection process could be completed within 1.5 h with excellent selectivity. Moreover, this microfluidic biosensor is capable of detecting multiple viruses simultaneously by spatial encoding of capture antibodies. One prominent feature of the device is that the captured H5N2 AIV can be released by simply dissolving ZnO nanorods under slightly acidic environment for subsequent off-chip analyses. As a whole, this platform provides a powerful tool for rapid detection of multiple pathogens, which may extent to the other fields for low-cost and convenient biomarker detection.

Multifunctional Nanofibers for Specific Purification and Release of CTCs

Recovering pure and viable circulating tumor cells (CTCs) from blood has been a challenging task for molecular characterization and functional analysis, which has attracted wide attention these days. Herein, we fabricate a thermoresponsive chitosan nanofiber substrate to effectively capture, purify, and release the target cancer cells, assisted by PNIPAAm brushes and DNA hybridization. The PNIPAAm brushes are designed to enable WBCs to detach from aptamer-PNIPAAm-chitosan-nanofiber (aptamer-P-CNFs) surfaces during the conformational transition. Meanwhile these specific captured CTCs are retained at a high purity. Moreover, effective and intact release of CTCs from the substrates without any foreign agents is realized by complementary sequences efficiently hybridizing with aptamers, and the specific cell release makes CTCs further purified. The present work provides a new strategy in the design of biointerface for recovering target CTCs from whole blood samples with high purity.

Efficient Capture of Cancer Cells by Their Replicated Surfaces Reveals Multiscale Topographic Interactions Coupled with Molecular Recognition

Cell-surface topographic interactions can direct the design of biointerfaces, which have been widely used in isolation of circulating tumor cells or fundamental cell biological research. By using three kinds of cancer cell-replicated surfaces with differentiated structures, we uncover that multiscale-cooperative topographic interactions (at both nanoscale and microscale) coupled with molecular recognition enable efficient and specific isolation of cancer cells. The cell replicas precisely inherit the structural features from the original cancer cells, providing not only preferable structures for matching with cancer cells but also a unique platform to interrogate whether certain cancer cells can optimally match with their own replicated surfaces. The results reveal that cancer cells do not show preferential recognitions to their respective replicas, while the capture agent-modified surfaces with hierarchical structures exhibit improved cancer cell capture efficiencies. Two levels of topographic interactions between cancer cells and cell replica surfaces exist. Nanoscale filopodia on cancer cells can topographically interact with different nanostructures on replica surfaces. In addition, microscale concave/convex on surfaces provide suitable sites for trapping cancer cells. This study may promote smart design of multiscale biofunctional materials that can specifically recognize cancer cells.

Bioinspired Hierarchically Structured Surfaces for Efficient Capture and Release of Circulating Tumor Cells

The development of novel bioinspired surfaces with hierarchical micro- and nanoscale topographic structures for efficient capture and release of circulating tumor cells (CTCs) is reported. The capture of CTCs, facilitated by surface-immobilized epithelial cell adhesion molecule antibodies (anti-EpCAM), was shown to be significantly enhanced in novel three-dimensional hierarchically structured surfaces that were fabricated by replicating the natural micro- and nanostructures of rose petals. Under static conditions, these hierarchical capture substrates exhibited up to 6 times higher cell capture ability at concentrations of 100 cells mL^-1 in contrast to flat anti-EpCAM-functionalized polydimethylsiloxane (PDMS) surfaces. As indicated by scanning electron microscopy (SEM) and immunofluorescent images, this enhancement can be in large part attributed to the topographical interaction between nanoscale cell surface components and nanostructures on the substrate. Similarly, the increased surface area affords a higher nominal coverage of anti-EpCAM, which increases the number of available binding sites for cell capture. By treating the substrates with the biocompatible reductant glutathione (GSH), up to 85% of the captured cells were released, which displayed over 98% cell viability after culturing on tissue culture polystyrene (TCP) for 24 h. Therefore, these bioinspired hierarchically structured and functionalized substrates can be successfully applied to capture CTCs, as well as release CTCs for subsequent analysis. These findings provide new prospects for designing cell-material interfaces for advanced cell-based biomedical studies in the future.

Enrichment and single-cell analysis of circulating tumor cells

Up to 90% of cancer-related deaths are caused by metastatic cancer. Circulating tumor cells (CTCs), a type of cancer cell that spreads through the blood after detaching from a solid tumor, are essential for the establishment of distant metastasis for a given cancer. As a new type of liquid biopsy, analysis of CTCs offers the possibility to avoid invasive tissue biopsy procedures with practical implications for diagnostics. The fundamental challenges of analyzing and profiling CTCs are the extremely low abundances of CTCs in the blood and the intrinsic heterogeneity of CTCs. Various technologies have been proposed for the enrichment and single-cell analysis of CTCs. This review aims to provide in-depth insights into CTC analysis, including various techniques for isolation of CTCs with capture methods based on physical and biochemical principles, and single-cell analysis of CTCs at the genomic, proteomic and phenotypic level, as well as current developmental trends and promising research directions.

Redox-Responsive Self-Assembly Micelles from Poly(N-acryloylmorpholine-block-2-acryloyloxyethyl ferrocenecarboxylate) Amphiphilic Block Copolymers as Drug Release Carriers

Novel well-defined redox-responsive ferrocene-containing amphiphilic block copolymers (PACMO-b-PAEFC) were synthesized by ATRP, with poly(N-acryloylmorpholine) (PACMO) as hydrophilic blocks and poly(2-acryloyloxyethyl ferrocenecarboxylate) (PAEFC) as hydrophobic blocks. The copolymers were characterized by FT-IR and ¹H NMR spectroscopies and gel permeation chromatography, and the crystalline behavior was determined by X-ray diffraction and small-angle X-ray scattering. The results showed that the size of the lamellar crystals and crystallinity vary with the systematic compositions while the periodic structure of the lamellar stacks has no obvious change. These block copolymers could self-assemble and form globular nanoscaled core-shell micellar aggregates in aqueous solution. The reductive ferrocene groups could be changed into hydrophilic ferrocenium via mild oxidation, whereas the polymer micelles at the oxidation state could reversibly recover from their original states upon reduction by vitamin C. The tunable redox response was investigated and verified by transmission electron microscopy, ultraviolet-visible spectroscopy, cyclic voltammetry, and dynamic light scattering measurements. The copolymer micelles were used to entrap anticancer drug paclitaxel (PTX), with high drug encapsulation efficiency of 61.4%, while the PTX-loaded drug formulation exhibited oxidation-controlled drug release, and the release rate could be mediated by the kinds and concentrations of oxidants. MTT assay was performed to disclose the biocompatibility and security of the copolymer micelles and to assess anticancer efficiency of the PTX-loaded nanomicelles. The developed copolymer nanomicelles with reversible redox response are anticipated to have potential in targeted drug delivery systems for cancer therapy.

Label-Free Virus Capture and Release by a Microfluidic Device Integrated with Porous Silicon Nanowire Forest

Viral diseases are perpetual threats to human and animal health. Detection and characterization of viral pathogens require accurate, sensitive, and rapid diagnostic assays. For field and clinical samples, the sample preparation procedures limit the ultimate performance and utility of the overall virus diagnostic protocols. This study presents the development of a microfluidic device embedded with porous silicon nanowire (pSiNW) forest for label-free size-based point-of-care virus capture in a continuous curved flow design. The pSiNW forests with specific interwire spacing are synthesized in situ on both bottom and sidewalls of the microchannels in a batch process. With the enhancement effect of Dean flow, this study demonstrates that about 50% H5N2 avian influenza viruses are physically trapped without device clogging. A unique feature of the device is that captured viruses can be released by inducing self-degradation of the pSiNWs in physiological aqueous environment. About 60% of captured viruses can be released within 24 h for virus culture, subsequent molecular diagnosis, and other virus characterization and analyses. This device performs viable, unbiased, and label-free virus isolation and release. It has great potentials for virus discovery, virus isolation and culture, functional studies of virus pathogenicity, transmission, drug screening, and vaccine development.

Antibody-modified hydroxyapatite surfaces for the efficient capture of bladder cancer cells in a patient's urine without recourse to any sample pre-treatment

In this study, we describe a sensitive protocol for the detection of bladder cancer cells in a patient's urine without pre-treatment of the urine sample using antibody-modified hydroxyapatite (HAp) micro/nanostructured surfaces converted from natural seashells under mild biomineralization conditions.