In Situ Fabrication of Halide Perovskite Nanocrystal-Embedded Polymer Composite Films with Enhanced Photoluminescence for Display Backlights

PVDF-directed synthesis, stability and anion exchange of cesium lead bromide nanocrystals

Photoluminescent perovskite nanocrystals are mostly used along with base materials such as polymers for material processing and large-scale production purpose. However, the role of polymer in crystal structure engineering and thereby dictating the emission properties of lead halide perovskite nanocrystals is poorly understood. First, we have developed a polymer-directed antisolvent method for synthesis of halide perovskite crystals at room temperature. The thermodynamic stabilities of crystals drive the formation of perovskite composite crystal of orthorhombic Cs4PbBr6 and monoclinic CsPbBr3. Surprisingly, hydrophobic polyvinylidene fluoride (PVDF) can reduce the size of perovskite crystals to nano dimensions even at room temperature. On the other hand, perovskite nanocrystals, CsPbBr3 synthesized by modified hot-injection method undergo rapid encapsulation in PVDF matrices. The size of the encapsulated nanocrystal in PVDF matrices ranges in 88 ± 32 nm. Three types of radiative recombination are predominantly operative in nanocrystals-doped polymer- surface defect caused radiative recombination (0.6 - 3 ns), exciton recombination (3 - 15 ns), and shallow trap assisted recombination (10 - 50 ns). The interface created at nanocrystal and polymer plays a decisive role in populating the shallow trap states in perovskite-polymer nanocomposite. These nanocrystals have been shown to undergo fast halide exchange in aqueous hydroiodic acid solution and possess remarkable enhancement of water-/photo-stability. This research would pave way for their greater use in hydrogen production and light-emitting devices.

Enhancing the Intrinsic and Extrinsic Stability of Halide Perovskite Nanocrystals for Efficient and Durable Optoelectronics

Over the past few years, metal halide perovskite nanocrystals have been at the forefront of colloidal semiconductor nanomaterial research because of their fascinating properties and potential applications. However, their intrinsic phase instability and chemical degradation under external exposures (high temperature, water, oxygen, and light) are currently limiting the real-world applications of perovskite optoelectronics. To overcome these stability issues, researchers have reported various strategies such as doping and encapsulation. The doping improves the optical and photoactive phase stability, whereas the encapsulation protects the perovskite NCs from external exposures. This perspective discusses the rationale of various strategies to enhance the stability of perovskite NCs and suggests possible future directions for the fabrication of optoelectronic devices with long-term stability while maintaining high efficiency.

Alcohol-Stable Perovskite Nanocrystals and Their In Situ Capsulation with Polystyrene

In recent years, lead halide perovskite nanocrystals (PNCs) have presented potential scalable applications in all fields due to their outstanding properties. However, most commonly used PNCs capped with oleic acid (OA) and oleylamine (OAm) suffer from bad stability in polar solutions and thus require various surface protections with organic or inorganic materials. Encapsulation with highly hydrophobic polystyrene (PS) is one of the most efficient ways to protect PNCs; however, the presently used swelling-shrinking strategy faces several challenges, such as weak interaction between PS chains and the surface ligands in nonpolar media causing a low encapsulation efficiency, and serious aggregation of PS particles during the shrinkage process leading to very different particle sizes. Herein, alcohol-stable polyacrylic acid-capped CsPbBr3 PNCs (i.e., PAA-PNCs) are first synthesized and then in situ encapsulated with PS shells by polymerizing styrene monomer on the PNC surfaces in a polar organic solvent (e.g., ethanol). The in situ PS-encapsulated PAA-PNCs (i.e., PAA-PNCs@iPS) exhibit outstanding monodispersity, remarkable water, heat, and UV stability, high fluorescence activity, and color purity. The unique synthesis strategy and good performances of PAA-PNCs@iPS will boost the applications of PNCs in LEDs, biological imaging, and chemosensing.

Halide perovskite single crystals: growth, characterization, and stability for optoelectronic applications

Recently, metal halide perovskite materials have received significant attention as promising candidates for optoelectronic applications with tremendous achievements, owing to their outstanding optoelectronic properties and facile solution-processed fabrication. However, the existence of a large number of grain boundaries in perovskite polycrystalline thin films causes ion migration, surface defects, and instability, which are detrimental to device applications. Compared with their polycrystalline counterparts, perovskite single crystals have been explored to realize stable and excellent properties such as a long diffusion length and low trap density. The development of growth techniques and physicochemical characterizations led to the widespread implementation of perovskite single-crystal structures in optoelectronic applications. In this review, recent progress in the growth techniques of perovskite single crystals, including advanced crystallization methods, is summarized. Additionally, their optoelectronic characterizations are elucidated along with a detailed analysis of their optical properties, carrier transport mechanisms, defect densities, surface morphologies, and stability issues. Furthermore, the promising applications of perovskite single crystals in solar cells, photodetectors, light-emitting diodes, lasers, and flexible devices are discussed. The development of suitable growth and characterization techniques contributes to the fundamental investigation of these materials and aids in the construction of highly efficient optoelectronic devices based on halide perovskite single crystals.

Cesium lead iodide electrospun fibrous membranes for white light-emitting diodes

Inorganic perovskite cesium lead iodide nanocrystals (CsPbI3NCs) are good candidates for optoelectronic devices because of their excellent properties of remarkable luminous performance (high luminous efficiency, narrow luminous spectral line), and high photoelectric conversion efficiency by using simple preparation method. But their inherent poor stability greatly limits its practical applications. In this paper, electrospinning is used to grow fibrous membranes with embedded cesium lead iodide perovskite nanocrystals (PNCs) formedin situin a one-step process. It was found that cubicα-CsPbI3PNCs were formed in polymer fibers, showing bright and uniform fluorescence signals. Furthermore, the water wetting angles were increased by the fibrous structure enhancing the hydrophobicity and the stability of the fibrous membranes in water. The electrospun fibrous membrane containing CsPbI3was combined with another membrane containing CsPbBr3under a blue light-emitting diode (LED) to create a white LED (WLED) in air successfully with CIE coordinates (0.3020, 0.3029), and a correlated color temperature of 7527 °K, indicating high purity of WLED. Our approach provides a new way to create highly stable, photoluminescent water-resistant perovskite nanocrystalline films.

CsPb(Br/Cl)3 Perovskite Nanocrystals with Bright Blue Emission Synergistically Modified by Calcium Halide and Ammonium Ion

Colloidal cesium lead halide (CsPbX3, X = Cl, Br, and I) perovskite nanocrystals (NCs) demonstrate supreme optical properties in the spectra region of infrared, red, and green. High-performance blue-emitting counterparts are still eagerly required for next-generation full-color displays. However, it is challenging to obtain efficient blue perovskite NCs, especially in a deep blue region with an emission wavelength of around 460 nm or shorter. Herein, calcium halide and ammonium ions are applied simultaneously to modify the CsPb(Br/Cl)3 NCs in situ to reduce surface defects, finally remarkably enhancing the photoluminescence quantum yield (PLQY) from 13% to 93% with an emission peak at 455 nm and the Commission Internationale de l'Eclairage (CIE) coordinates at (0.147, 0.030), which is close to the requirement of the Rec.2020 standard and also meets the requirement of blue emission in DCI-P3. Bright white emission and a wide color gamut are also achieved by combining the commercial red-emitting and green-emitting phosphors. The combination of time-resolved PL spectra and femtosecond transient absorption results discloses the reason for PLQY improvement as suppressing the nonradiative recombination.

One-step spray coating strategy toward a highly uniform large-area CsPbBr3@PMMA composite film for backlit display

The large-scale and continuous production of CsPbBr₃@PMMA composite film is realized by the in-situ ultrasonic spray coating method at room temperature. Through embedding CsPbBr₃ nanocrystals into the hydrophobic polymer framework, the as-fabricated films (20 cm × 20 cm) exhibit uniform green emissions with a relatively high PLQYs of 76%, and could maintain 80% PL intensity after 3 months storage under ambient conditions. Assembling the green-emissive CsPbBr₃@PMMA film and the red-emissive KSF@PMMA film with blue LED chip, a high-performance LCD is obtained, reaching a higher saturation with 126% and 94% color gamut of NTSC and Rec.2020, respectively. This work demonstrates that ultrasonic spray coating technique could be widely used in the large-scale fabrication of uniformly high-quality perovskite films for backlight application.

Tunable Green Light-Emitting CsPbBr3 Based Perovskite-Nanocrystals-in-Glass Flexible Film Enables Production of Stable Backlight Display

Despite recent advances in producing perovskite-nanocrystals-in-glass (PNG) for display application, it remains challenging to achieve ultrapure and large-area CsPbBr₃ PNG-based flexible films with tunable green emission. Herein, we report a facile strategy to produce flexible film containing CsPbBr₃ PNG. Specifically, the achievement of CsPbBr₃ PNG with tunable green emissions (517-528 nm) is realized by elaborate regulation of the glass precursor concentration and thermal treatment temperature by an in situ growth method. With the integration of red-light-emitting CsPbBr_xI_3-x PNG powder, the color gamut of as-prepared white-light-emitting sources can cover up to 126.27% of the NTSC 1953 standard and 93.9% of the Rec. 2020 standard. Notably, flexible and large-area white-light-emitting films can be readily obtained by sandwiching and gluing mixed PNG powders between two layers of hydrophobic and transparent PET films. Intriguingly, as-prepared PNG films exhibit excellent hydrothermal, photostability, and long-term operation stability, making them promising for practical ultrahigh-definition displays.

Boosted Inner Surface Charge Transfer in Perovskite Nanodots@Mesoporous Titania Frameworks for Efficient and Selective Photocatalytic CO2 Reduction to Methane

Exploring high-efficiency and stable halide perovskite-based photocatalysts for the selective reduction of CO₂ to methane is a challenge because of the intrinsic photo- and chemical instability of halide perovskites. In this study, halide perovskites (Cs₃ Bi₂ Br₉ and Cs₂ AgBiBr₆ ) were grown in situ in mesoporous TiO₂ frameworks for an efficient CO₂ reduction. Benchmarked CH₄ production rates of 32.9 and 24.2 μmol g^-1  h^-1 with selectivities of 88.7 % and 84.2 %, were achieved, respectively, which are better than most reported halide perovskite photocatalysts. Focused ion-beam sliced-imaging techniques were used to directly image the hyperdispersed perovskite nanodots confined in mesopores with tunable sizes ranging from 3.8 to 9.9 nm. In situ X-ray photoelectronic spectroscopy and Kelvin probe force microscopy showed that the built-in electric field between the perovskite nanodots and mesoporous titania channels efficiently promoted photo-induced charge transfer. Density functional theory calculations indicate that the high methane selectivity was attributed to the Bi-adsorption-mediated hydrogenation of *CO to *HCO that dominates CO desorption.

A First-Principles Study on the Structural and Carrier Transport Properties of Inorganic Perovskite CsPbI3 under Pressure

Lead halide perovskite has attracted intensive attention for pressure and strain detection. Principally, pressure-induced changes in the structure and resistance of perovskite may bring great potential for developing high-performance piezoresistive pressure sensors. Herein, for the first time, we study the structural changes and the hot carrier cooling process of perovskite CsPbI3 under pressure based on density functional theory and time-dependent density functional theory. The calculation results show that the lattice constant of CsPbI3 linearly decreases and the time and path of the hot carrier cooling process change apparently under pressure. Meanwhile, the pressure will change the transition dipole moment, and the position of the k-point will not affect the optical properties of perovskite. Subsequently, the electrical conductivity enlarges as the pressure increases due to the change in charge density caused by pressure, which will be helpful for its potential application in the pressure sensors.

Micropore filling fabrication of high resolution patterned PQDs with a pixel size less than 5 μm

PQDs are promising color converters for micro-LED applications. Here we report the micropore filling fabrication of high resolution patterned PQDs with a pixel size of 2 μm using a template with SU8 micropores.

Incorporation of Perovskite Nanocrystals into Polymer Matrix for Enhanced Stability in Biological Media: In Vitro and In Vivo Studies

The outstanding optical properties and multiphoton absorption of lead halide perovskites make them promising for use as fluorescence tags in bioimaging applications. However, their poor stability in aqueous media and biological fluids significantly limits their further use for in vitro and in vivo applications. In this work, we have developed a universal approach for the encapsulation of lead halide perovskite nanocrystals (PNCs) (CsPbBr₃ and CsPbI₃) as water-resistant fluorescent markers, which are suitable for fluorescence bioimaging. The obtained encapsulated PNCs demonstrate bright green emission at 510 nm (CsPbBr₃) and red emission at 688 nm (CsPbI₃) under one- and two-photon excitation, and they possess an enhanced stability in water and biological fluids (PBS, human serum) for a prolonged period of time (1 week). Further in vitro and in vivo experiments revealed enhanced stability of PNCs even after their introduction directly into the biological microenvironment (CT26 cells and DBA mice). The developed approach allows making a step toward stable, low-cost, and highly efficient bioimaging platforms that are spectrally tunable and have narrow emission.

Methylammonium Lead Bromide Perovskite Nano-Crystals Grown in a Poly[styrene-co-(2-(dimethylamino)ethyl methacrylate)] Matrix Immobilized on Exfoliated Graphene Nano-Sheets

Development of graphene/perovskite heterostructures mediated by polymeric materials may constitute a robust strategy to resolve the environmental instability of metal halide perovskites and provide barrierless charge transport. Herein, a straightforward approach for the growth of perovskite nano-crystals and their electronic communication with graphene is presented. Methylammonium lead bromide (CH₃NH₃PbBr₃) nano-crystals were grown in a poly[styrene-co-(2-(dimethylamino)ethyl methacrylate)], P[St-co-DMAEMA], bi-functional random co-polymer matrix and non-covalently immobilized on graphene. P[St-co-DMAEMA] was selected as a bi-modal polymer capable to stabilize the perovskite nano-crystals via electrostatic interactions between the tri-alkylamine amine sites of the co-polymer and the A-site vacancies of the perovskite and simultaneously enable Van der Waals attractive interactions between the aromatic arene sites of the co-polymer and the surface of graphene. The newly synthesized CH₃NH₃PbBr₃/co-polymer and graphene/CH₃NH₃PbBr₃/co-polymer ensembles were formed by physical mixing of the components in organic media at room temperature. Complementary characterization by dynamic light scattering, microscopy, and energy-dispersive X-ray spectroscopy revealed the formation of uniform spherical perovskite nano-crystals immobilized on the graphene nano-sheets. Complementary photophysical characterization by UV-Vis absorption, steady-state, and time-resolved fluorescence spectroscopy unveiled the photophysical properties of the CH₃NH₃PbBr₃/co-polymer colloid perovskite solution and verified the electronic communication within the graphene/CH₃NH₃PbBr₃/co-polymer ensembles at the ground and excited states.

In Situ Fabrication of Cs3Cu2I5: Tl Nanocrystal Films for High-Resolution and Ultrastable X-ray Imaging

Cs₃Cu₂I₅ nanocrystals (NCs) are considered to be promising materials due to their high photoluminescence efficiency and X-ray hardness. However, the present strategy depends on tedious fabrication with excessive chemical waste. The evasive iodide ion dissociation, inadaptable ligand system, low stability, and relatively low light yield severely impede their applications. Herein, we develop an in situ fabrication strategy for a flexible and large-area Tl-doped Cs₃Cu₂I₅ NC-polymer composite scintillation film with a high light yield (∼48800 photons/MeV) and improved stability. Tween 80 and phosphinic acid successfully inhibit the oxidation of iodide ions, and the films can be stored for at least six months. As a result, a high spatial resolution of 16.3 lp mm^-1 and a low detection limit of 305 nGy_air s^-1 were achieved. A radioluminescence intensity of >80% was maintained after a total irradiation dose of 604.8 Gy. These results indicate the promising application of these copper halide NCs in low-cost, flexible, and high-performance medical imaging.

What Happens When Halide Perovskites Meet with Water?

Halide perovskites are considered to be next-generation semiconductor materials with bright prospects to advance the technology of photonics and optoelectronics. Because of the intrinsic ionic feature, the interactions between perovskites and water induce serious stability issues, which has been one of the fundamental problems hindering the practical application of perovskites. The degradation of halide perovskites upon water exposure has been intensively studied, resulting in chemical insights into key processes, including hydration, phase transformation, decomposition, and dissolution. In this Perspective, we try to illustrate what happens when halide perovskites meet with water. We summarize the research progress regarding the understanding of these processes and discuss the principle of strategy design toward improved stability against water. In addition to the instability-related interactions, we also discuss the aqueous solution of perovskite precursors for fabricating perovskite-based functional materials. Hopefully, this Perspective can inspire more fundamental studies on the interactions between perovskites and water, such as spectroscopy and simulation, crystal structure and material characterizations, and solution chemistry and crystallization.

Tough, stable and self-healing luminescent perovskite-polymer matrix applicable to all harsh aquatic environments

Gelatinous underwater invertebrates such as jellyfish have organs that are transparent, luminescent and self-healing, which allow the creatures to navigate, camouflage themselves and, indeed, survive in aquatic environments. Artificial luminescent materials that can mimic such functionality can be used to develop aquatic wearable/stretchable displays and water-resistant devices. Here, a luminescent composite that is simultaneously transparent, tough and can autonomously self-heal in both dry and wet conditions is reported. A tough, self-healable fluorine elastomer with dipole–dipole interactions is synthesized as the polymer matrix. It exhibits excellent compatibility with metal halide perovskite quantum dots. The composite possesses a toughness of 19 MJ m−3, maximum strain of 1300% and capability to autonomously self-heal underwater. Notably, the material can withstand extremely harsh aqueous conditions, such as highly salty, acidic (pH = 1) and basic (pH = 13) environment for more than several months with almost no decay in mechanical performance or optical properties.

Synthesis of Stable Lead-Free Cs3 Sb2 (Brx I1- x )9 (0 ≤ x ≤ 1) Perovskite Nanoplatelets and Their Application in CO2 Photocatalytic Reduction

Exploring photocatalysts to foster CO₂ photoreduction into high value-added chemicals is of great significance. Lead halide perovskites (LHPs) have recently been extensively investigated as photocatalysts, owing to their facile fabrication and prominent optoelectronic properties. However, the toxicity of lead and instability will hinder their future large-scale applications. To address these challenges, a series of lead-free Sb-based all-inorganic mixed halide perovskite Cs₃ Sb₂ (Br_x I_{1- x} )₉ (0 ≤ x ≤ 1) nanoplatelets (NPLs) is synthesized. The perovskite NPLs are prepared using a ligand-assisted re-precipitation approach at 50 °C. The authors observe the tunability of their optical band gaps from 2.1 to 2.5 eV, and they can maintain the excellent stability over 120 h under heating at 100 °C or UV light irradiation. The resultant materials are employed as efficient photocatalysts for visible-light driven CO₂ reduction at the gas-solid interface. The Cs₃ Sb₂ (Br_0.7 I_0.3 )₉ perovskite NPLs afford an impressive overall yield of 27.7 µmol g^-1 for the selective photocatalytic conversion of CO₂ into CO. This study represents a significant demonstration for practical artificial photosynthesis by using LHP materials as photocatalysts.

In situ preparation of Mn-doped perovskite nanocrystalline films and application to white light emitting devices

Mn-doped perovskite nanocrystals have promised new optoelectronic applications due to their unique material properties. In the present study, Mn-doped perovskite nanocrystalline films were prepared in situ in a polymer matrix. The Mn-doped perovskite nanocrystals (PNCs) had good crystallinity and uniform size/spatial distributions in the polymer film. Bright dual-color emission and the long lifetime of the excited state of the dopant were observed from the host exciton and the Mn²⁺ dopant, respectively. Furthermore, magnetism was observed in the optimal Mn²⁺ concentration, implying that magnetic coupling was achieved in the Mn-doped perovskite lattice. The Mn-doped perovskite films also showed superior stability against moisture. To demonstrate the practicality of this composite film, a white light emitting device was fabricated by combining a single composite film with a blue light emitting diode; the device showed a high-quality white light emission, and the Commission Internationale De L'Eclairage (CIE) chromaticity coordinate of the white light emitting diode (WLED) (0.361, 0.326) was close to the optimal white color index. In this single-layer WLED, self-absorption among the luminous multilayers in traditional white light emitting diodes can be avoided. The study findings revealed that Mn-doped perovskite nanocrystalline films have many exciting properties, which bodes well for the fundamental study and design of high-performance optoelectronic devices.

Large-scale continuous preparation of highly stable α-CsPbI3/m-SiO2 nanocomposites by a microfluidics reactor for solid state lighting application

CsPbI3-Mesoporous SiO2 nanocomposites with ultrahigh chemical stability were fabricated by the microfluidic technology for large-scale continuous production.

Investigation of emission behaviour of perovskite nanocrystals using nano to microspheres of TiO2

The encapsulation of MAPbBr3 perovskites nanocrystals into the pores of TiO2 microspheres (m-TiO2) remarkably enhances the stability and PLQY to 95%.

Efficient Ce3+ → Tb3+ energy transfer pairs with thermal stability and internal quantum efficiency close to unity

The incorporation of Ce3+–Tb3+ pairs has been reported in the Ca3Lu2Si6O18 (CLSO) host for identifying a novel green-emitting material with extremely high internal quantum efficiency (close to unity) and excellent thermal stability.

Quantum-dot array with a random rough interface encapsulated by atomic layer deposition

This Letter proposes the use of atomic layer deposition (ALD) encapsulation as a stability-improving approach for a quantum-dot micro-structural array (QDMA) with a random rough interface. The QDMA is first prepared by screen printing technology on an edge-lit light-guide plate (LGP) for backlight application. A flexible aluminum oxide film is then densely deposited onto the rough surface of the QDMA. The influences of two key factors, the reaction temperature and deposition thickness, on the encapsulation effect and output performance of this QD backlight are discussed. After ALD encapsulation, the water vapor transmission rate was measured to be less than 0.014 g/(m² day). The average luminance of the encapsulated QD backlight remained stable after continuous working for 200 h, while an unencapsulated QD backlight lost over 50% of its initial luminance. The complete attenuation trend for the encapsulated QD backlight was analyzed in a more demanding testing environment, and results showed that 80% (>3000 cd/m²) of the initial luminance was maintained after 250 h at a high temperature of 70 °C and a relative humidity of 90%. The mechanism behind these experimental results is also discussed.

Recent Advances in Synthesis, Properties, and Applications of Metal Halide Perovskite Nanocrystals/Polymer Nanocomposites

Metal halide perovskite nanocrystals (PNCs) have recently garnered tremendous research interest due to their unique optoelectronic properties and promising applications in photovoltaics and optoelectronics. Metal halide PNCs can be combined with polymers to create nanocomposites that carry an array of advantageous characteristics. The polymer matrix can bestow stability, stretchability, and solution-processability while the PNCs maintain their size-, shape- and composition-dependent optoelectronic properties. As such, these nanocomposites possess great promise for next-generation displays, lighting, sensing, biomedical technologies, and energy conversion. The recent advances in metal halide PNC/polymer nanocomposites are summarized here. First, a variety of synthetic strategies for crafting PNC/polymer nanocomposites are discussed. Second, their array of intriguing properties is examined. Third, the broad range of applications of PNC/polymer nanocomposites is highlighted, including light-emitting diodes (LEDs), lasers, and scintillators. Finally, an outlook on future research directions and challenges in this rapidly evolving field are presented.

Luminescence enhancement of lead halide perovskite light-emitting diodes with plasmonic metal nanostructures

Metal halide perovskites, as newly emerging light emitters, have been attracting considerable attention on luminescent materials and devices, due to their superior optoelectronic properties and potential practical applications. Recently, perovskite light-emitting diodes (PeLEDs) based on lead halide perovskites (LHPs) have been largely designed and intensively studied in laboratory platforms. However, to satisfy demand and promote their commercialization, it is crucial to improve the efficiency and stability of PeLEDs. Accordingly, the surface-plasmon (SP) effect provides a promising approach to enhance their luminescence, which is realized by incorporating plasmonic metal nanostructures (NSs) into PeLEDs. This review presents a comprehensive overview of the research status and prospect on LHP-based plasmonic PeLEDs together with the corresponding perovskite light-emission films (PeLEFs). Firstly, the recent development of the PeLEDs is briefly introduced. Secondly, the mechanisms and photophysics of the PeLEDs by SP manipulation are simply illustrated and analyzed. Then, the recent progress and achievements on the theoretical and experimental results of SP effect applications in the PeLEDs together with PeLEFs are presented in detail and systematically reviewed. Next, the current challenges and future directions of the PeLEDs are shown and discussed. Finally, a critical summary and outlook of the PeLEDs are summarized and proposed. Our results indicate that this new class of LHP-based plasmonic PeLEDs presents future research fields and demonstrates promising applications in lighting and displays, and further luminescence enhancement in exciton radiation processes and light extraction techniques are a hopeful route to obtain high-performance PeLEDs.

Coexistent Integer Charge Transfer and Charge Transfer Complex in F4-TCNQ-Doped PTAA for Efficient Flexible Organic Light-Emitting Diodes

Understanding the mechanism of interaction between organic polymers and dopants is of great significance to further enhance the performances of flexible electronics. Here, the two doping mechanisms of charge transfer complex (CTC) and integer charge transfer (ICT) are found to coexist in p-π conjugated PTAA doped with the strong acceptor F4-TCNQ, and their correlation is affected by the HJ-aggregate state of the doped polymer. The growth of the J-aggregate caused by the increase of CTC would lead to a corresponding formation of ICT. The doping efficiency was dominated by the CTC/ICT ratio. On the basis of the analysis of the optical, electrical, and morphological properties of PTAA:F4-TCNQ films, we optimized the CTC/ICT ratio to achieve the efficient hole transport layers that are used in solution-processed flexible phosphorescent organic light-emitting diodes with p-i-n structure. The optimal device presents a very high current efficiency (CE) of 31.12 cd/A and a low turn-on voltage of 3.6 V.

Perovskite Quantum Dots Encapsulated in a Mesoporous Metal-Organic Framework as Synergistic Photocathode Materials

Metal halide perovskite quantum dots, with high light-absorption coefficients and tunable electronic properties, have been widely studied as optoelectronic materials, but their applications in photocatalysis are hindered by their insufficient stability because of the oxidation and agglomeration under light, heat, and atmospheric conditions. To address this challenge, herein, we encapsulated CsPbBr₃ nanocrystals into a stable iron-based metal-organic framework (MOF) with mesoporous cages (∼5.5 and 4.2 nm) via a sequential deposition route to obtain a perovskite-MOF composite material, CsPbBr₃@PCN-333(Fe), in which CsPbBr₃ nanocrystals were stabilized from aggregation or leaching by the confinement effect of MOF cages. The monodispersed CsPbBr₃ nanocrystals (4-5 nm) within the MOF lattice were directly observed by transmission electron microscopy and corresponding mapping analysis and further confirmed by powder X-ray diffraction, infrared spectroscopy, and N₂ adsorption characterizations. Density functional theory calculations further suggested a significant interfacial charge transfer from CsPbBr₃ quantum dots to PCN-333(Fe), which is ideal for photocatalysis. The CsPbBr₃@PCN-333(Fe) composite exhibited excellent and stable oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalytic activities in aprotic systems. Furthermore, CsPbBr₃@PCN-333(Fe) composite worked as the synergistic photocathode in the photoassisted Li-O₂ battery, where CsPbBr₃ and PCN-333(Fe) acted as optical antennas and ORR/OER catalytic sites, respectively. The CsPbBr₃@PCN-333(Fe) photocathode showed lower overpotential and better cycling stability compared to CsPbBr₃ nanocrystals or PCN-333(Fe), highlighting the synergy between CsPbBr₃ and PCN-333(Fe) in the composite.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Thermal Conductive Encapsulation Enables Stable High-Power Perovskite-Converted Light-Emitting Diodes

Significant progress has been achieved on perovskite nanocrystal (PNC)-converted light-emitting diodes (PcLEDs) with the development of surface encapsulations. However, achieving bright and long-living devices remains a challenge because the thermal isolation structure of the air barriers exacerbates heat accumulation inside PcLEDs. Here, we proposed a thermal conductive encapsulation for PNCs by embedding CsPbBr₃ PNCs in layer-by-layer assembled boron nitride (BN) nanoplatelets through SiO₂ crosslinking. This structure effectively suppresses the heat accumulation on PNCs and provides excellent air resistance, enabling the PNC-SiO₂-BN composite to withstand 1000 h of photothermal annealing (under a 405 nm laser at 0.31 W cm^-2, 80 °C in air) without showing obvious degradation. Green- and white-light PcLEDs were fabricated via on-chip encapsulation of PNC-SiO₂-BN. The PcLEDs achieved the milestone in long-term stability (half-life time > 1000 h) at a high power density of ∼1.7 W cm^-2 and displayed extradentary stability at ∼0.15 W cm^-2 with constant light intensity within 1000 h of sustained illumination. The success in making thermal conductive composites will expedite the application of PNCs in LED backlights and other optoelectronic devices.

Organic Lead Halide Nanocrystals Providing an Ultra-Wide Color Gamut with Almost-Unity Photoluminescence Quantum Yield

The most attractive aspect of perovskite nanocrystals (NCs) for optoelectronic applications is their widely tunable emission wavelength, but it has been quite challenging to tune it without sacrificing the photoluminescence quantum yield (PLQY). In this work, we report a facile ligand-optimized ion-exchange (LOIE) method to convert room-temperature spray-synthesized, perovskite parent NCs that emit a saturated green color to NCs capable of emitting colors across the entire visible spectrum. These NCs exhibited exceptionally stable and high PLQYs, particularly for the pure blue (96%) and red (93%) primary colors that are indispensable for display applications. Surprisingly, the blue- and red-emissive NCs obtained using the LOIE method preserved the cubic shape and cubic phase structure that they inherited from their parent NCs, while exhibiting high crystallinity and high color-purity. Together with the parent green-emissive NCs, the obtained blue- and red-emissive NCs provided a very wide color gamut, corresponding to a Digital Cinema Initiatives-P3 of 140% or an International Telecommunication Union Recommendation BT.2020 of 102%. With the superior optical merits of these LOIE-manipulated NCs, a corresponding color conversion luminescence device provided a high external quantum efficiency (10.5%) and extremely high brightness (970 000 cd/m²). This study provides a valid route toward highly stable, extremely emissive, and panchromatic perovskite NCs with potential use in a variety of future optoelectronic applications.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Solvent- and initiator-free fabrication of efficient and stable perovskite-polystyrene surface-patterned thin films for LED backlights

We report a one-pot route for the synthesis of CsPbBr₃ perovskite nanocrystals (PNCs) in styrene to form a glue-like polystyrene (PS) pre-polymer incorporating mono-dispersed PNCs. The pre-polymer enables solvent- and initiator-free fabricating and patterning PNC-PS light down-conversion films for liquid crystal display application. The mechanistic study reveals that the styrene molecules adsorbed on the PNC surface undergo self-initiated polymerization in the pre-polymerization process, forming stable surface capsulation over the PNCs. The PNC-PS pre-polymer and composite film display high photoluminescent quantum yield (PLQY) and resistance to air, light irradiation and water. The micropatterned PNC-PS film with a period of 1000 nm was fabricated through imprinting of the pre-polymer. The micropatterned thin film displays an enlarged viewing angle, improved light distribution and PLQY of >90%. The backlight employing the PNC-PS film displays bright green color and a wide color gamut of >120% NTSC. This solvent-free and one-pot strategy could find promising potential in the development of diverse luminescent nanocomposites to meet the requirements of micro/nano-manufacturing and high performance display application.

Aspartic acid assisted one-step synthesis of stable CsPbX3@Asp-Cs4PbX6 by in situ growth in NH2-MIL-53 for ratiometric fluorescence detection of 4-bromophenoxybenzene

A molecularly imprinted ratiometric fluorescent sensor was synthesized for the detection of 4-bromophenoxybenzene (BDE-3) based on perovskite quantum dots and metal organic framework. First, aspartic acid (Asp) was introduced during the synthesis of perovskite CsPbX₃ for the formation of a core-shell structure of CsPbX₃@Asp-Cs₄PbX₆. Due to the protection of the shell layer Cs₄PbX₆, the stability of the core CsPbX₃ was improved significantly. Compared to CsPb(BrI)₃, the ultraviolet and thermal stabilities of CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ were increased by 26 times and 32 times, respectively, and, compared to CsPbBr₃, these stabilities of CsPbBr₃@Asp-Cs₄PbBr₆ were increased by 3 times and 13 times, respectively. The water stabilities of CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ and CsPbBr₃@Asp-Cs₄PbBr₆ were greatly improved too. Then, a ratiometric fluorescence sensor was constructed by in situ growth of CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ in metal organic framework (NH₂-MIL-53) for the detection of BDE-3, in which the orange fluorescence of CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ (614 nm) was regarded as the reference signal and the cyan fluorescence of NH₂-MIL-53 (494 nm) was used as the fluorescence response signal. To improve the selectivity of the sensor, the molecular imprinting polymer (MIP) was modified on the NH₂-MIL-53 and an imprinting factor of 3.17 was obtained. Under 365 nm light excitation, the fluorescent response signal at 494 nm was quenched gradually by BDE-3 in the range 11.4 to 68.5 nmol/L, while the reference signal at 614 nm remained unchanged. The limit of detection and limit of quantification were 3.35 and 11.2 nmol/L, respectively, and the fluorescent color of the sensor changed gradually from cyan to green to orange, which illustrated that the developed sensor has an ability to recognize BDE-3 specifically, a good anti-interference ability, and a sensitively visual detection ability. Moreover, the sensor was successfully applied to the BDE-3 detection in polyethylene terephthalate plastic bottle, polyvinyl chloride plastic bag, and circuit board with satisfactory recoveries (96.3-108.1%) and low relative standard deviations (5%). The preparation processes of NH₂-MIL-53, NH₂-MIL-53-CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆, and the MIP-NH₂-MIL-53-CsPb(BrI)₃@Asp-Cs₄Pb(BrI)₆ composites.

In Situ Ambient Preparation of Perovskite-Poly(l-lactic acid) Phosphors for Highly Stable and Efficient Hybrid Light-Emitting Diodes

Metal halide perovskite (MHP)-based phosphor-converted light-emitting diodes (pc-LEDs) are limited by the low MHP stability under storage/operation conditions. A few works have recently established the in situ synthesis of MHPs into polymer matrices as an effective strategy to enhance the stability of MHP with a low-cost fabrication. However, this is limited to petrochemical-based polymers. Herein, the first in situ ambient preparation of highly luminescent and stable MHP-biopolymer filters (MAPbBr₃ nanocrystals as an emitter and poly(l-lactic acid) (PLLA) as the matrix) with arbitrary areas (up to ca. 300 cm²) is reported. The MAPbBr₃-PLLA phosphors feature a narrow emission (25 nm) with excellent photoluminescence quantum yields (>85%) and stability under ambient storage, water, and thermal stress. This is corroborated in green pc-LEDs featuring a low-efficiency roll-off, an excellent operational stability of ca. 600 h, and high luminous efficiencies of 65 lm W^-1 that stand out compared to the prior state of the art (e.g., an average lifetime of 200 h at 50 lm W^-1). The filters are further exploited to fabricate white-emitting pc-LEDs with efficiencies of ca. 73 lm W^-1 and x/y CIE color coordinates of 0.33/0.32. Overall, this work establishes a straightforward (one-pot/in situ) and low-cost preparation (ambient/room temperature) of highly efficient and stable MHP-biopolymer phosphors for highly performing and more sustainable lighting devices.

Chiral Helical Polymer/Perovskite Hybrid Nanofibers with Intense Circularly Polarized Luminescence

Chiral perovskites with circularly polarized luminescence (CPL) performance have attracted tremendous attention. This contribution reports a convenient and universal strategy for constructing chiral helical polymer/perovskite hybrid nanofibers with outstanding CPL properties. The hybrid nanofibers are prepared through a one-step electrospinning method in which chiral helical polyacetylenes, perovskite nanocrystals, and polyacrylonitrile serve as a handed-selective fluorescence filter, fluorescent source, and electrospinning matrix, respectively. Specially, perovskite nanocrystals are in situ formed during the electrospinning process, which avoids the tedious process for preparing and purifying perovskites. The prepared hybrid nanofibers all exhibit good long-time stability in air, owing to the effective protection effect of polymer matrix. More importantly, intense CPL emissions with high dissymmetry factor up to 10^-2 level are obtained in the hybrid nanofibers. Furthermore, the emission color of CPL can be easily tuned by adjusting the precursors of perovskites. This work provides an efficient technique toward various kinds of CPL-active perovskite nanomaterials for both scientific research and future practical applications.

A Perovskite-Based Paper Microfluidic Sensor for Haloalkane Assays

Detection of haloalkanes is of great industrial and scientific importance because some haloalkanes are found serious biological and atmospheric issues. The development of a flexible, wearable sensing device for haloalkane assays is highly desired. Here, we develop a paper-based microfluidic sensor to achieve low-cost, high-throughput, and convenient detection of haloalkanes using perovskite nanocrystals as a nanoprobe through anion exchanging. We demonstrate that the CsPbX₃ (X = Cl, Br, or I) nanocrystals are selectively and sensitively in response to haloalkanes (CH₂Cl₂, CH₂Br₂), and their concentrations can be determined as a function of photoluminescence spectral shifts of perovskite nanocrystals. In particular, an addition of nucleophilic trialkyl phosphines (TOP) or a UV-photon-induced electron transfer from CsPbX₃ nanocrystals is responsible for achieving fast sensing of haloalkanes. We further fabricate a paper-based multichannel microfluidic sensor to implement fast colorimetric assays of CH₂Cl₂ and CH₂Br₂. We also demonstrate a direct experimental observation on chemical kinetics of anion exchanging in lead-halide perovskite nanocrystals using a slow solvent diffusion strategy. Our studies may offer an opportunity to develop flexible, wearable microfluidic sensors for haloalkane sensing, and advance the in-depth fundamental understanding of the physical origin of anion-exchanged nanocrystals.

Microfluidic synthesis of quantum dots and their applications in bio-sensing and bio-imaging

Bio-sensing and bio-imaging of organisms or molecules can provide key information for the study of physiological processes or the diagnosis of diseases. Quantum dots (QDs) stand out to be promising optical detectors because of their excellent optical properties such as high brightness, stability, and multiplexing ability. Diverse approaches have been developed to generate QDs, while microfluidic technology is one promising path for their industrial production. In fact, microfluidic devices provide a controllable, rapid and effective route to produce high-quality QDs, while serving as an effective in situ platform to understand the synthetic mechanism or optimize reaction parameters for QD production. In this review, the recent research progress in microfluidic synthesis and bio-detection applications of QDs is discussed. The definitions of different QDs are first introduced, and the advances in microfluidic-based fabrication of quantum dots are summarized with a focus on perovskite QDs and carbon QDs. In addition, QD-based bio-sensing and bio-imaging technologies for organisms of different scales are described in detail. Finally, perspectives for future development of microfluidic synthesis and applications of QDs are presented.

Stable bright perovskite nanoparticle thin porous films for color enhancement in modern liquid crystal displays

Cesium-lead halide perovskite nanoparticles are a promising class of luminescent materials for color and efficient displays. However, material stability is the key issue to solve before we can use these materials in modern displays. Encapsulation is one of the most efficient methods that can markedly improve the stability of perovskite nanoparticles against moisture, heat, oxygen, and light. Thus, we urgently need a low-cost, reliable, and device-compatible encapsulation method for the integration of nanomaterials into display devices. Here, we propose a facile encapsulation method to stabilize perovskite nanoparticles in thin polymer porous films. Using porous polymer films, we achieved good photoluminescence stability in the harsh environment of high temperature, high humidity and strong UV illumination. The good UV stability benefitted from the unique optical properties of the porous film. Besides, we observed photoluminescence enhancement of CsPbBr₃ nanoparticle films in a high humidity environment. The stable CsPbBr₃ nanoparticle thin porous film provides high brightness (236 nits) and great color enhancement for LCDs and is characterized by simple fabrication with easy scalability, thus it is very suitable for modern LCDs.

In Situ Inkjet Printing Patterned Lead Halide Perovskite Quantum Dot Color Conversion Films by Using Cheap and Eco-Friendly Aqueous Inks

Inkjet-printed perovskite quantum dot (PQD) color conversion films (CCFs) have great potentials for mini/micro-LED displays because of their ultrahigh color purity, tunable emissions, high efficiency, and high-resolution. However, current PQD inks mainly use expensive, toxic, and flammable organic substances as solvents. In this work, water is proposed to be used as the solvent for inkjet printing PQD/polymer CCFs. The green-emitting patterned MAPbBr₃ /polyvinyl alcohol (PVA) films are in situ prepared by using halides and the PVA-based aqueous ink. The as-printed CCFs exhibit a high-resolution dot matrix of 90 µm with a bright green emission (λ_em  = 526 nm), a high photoluminescence quantum yield of 85%, and a narrow full width at half maximum of 22 nm. They have both air- and photo-stabilities under ambient conditions, and each pixel of CCFs is relatively uniform in morphology and fluorescence when the substrate temperature is 80 °C. The patterned blue-emitting MAPbCl_x Br_3-x /PVA and red-emitting Cs_0.3 MA_0.7 PbBr_x I_3-x /PVA can also be printed by aqueous inks. These results indicate that the designed aqueous inks are promising for in situ inkjet printing high resolution and reliability PQD CCFs for mini/micro-LED displays.