Bifunctional Metal Organic Framework Catalysts for Multistep Reactions: MOF-Cu(BTC)-[Pd] Catalyst for One-Pot Heteroannulation of Acetylenic Compounds

One-pot synthesis of hydrazono-sulfonamide adducts using Cu(BTC) MOF catalyst and their remarkable AIEE properties: unprecedented copper(ii)-catalyzed generation of ketenimine

One pot & simple operation; short reaction time; no column purification; very less catalyst loading; scalable.

Structuring catalyst and reactor – an inviting avenue to process intensification

Multiphase catalytic processes involve the combination of scale-dependent and scale-independent phenomena, often resulting in a compromised, sub-optimal performance.

One-pot tandem catalysis over Pd@MIL-101: boosting the efficiency of nitro compound hydrogenation by coupling with ammonia borane dehydrogenation

The hydrogenation efficiency of nitro compounds is greatly boosted by coupling with ammonia borane dehydrogenation over rationally synthesized Pd@MIL-101 with Pd NPs in ∼3 nm.

Facile preparation and dual catalytic activity of copper(i)–metallosalen coordination polymers

Three copper(i)–metallosalen coordination polymers (CPs), {[Ni^II(SalImCy)]₂(Cu^ICN)₉}_n (1), {[Cu^II(SalImCy)]₂(Cu^ICN)₉}_n (2) and {[Ni^II(SalImCy)](Cu^II)₂·DMF}_n (3) were prepared by direct combination of Ni^II/Cu^II(salen) motifs with [Cu^ICN]_n chains and Cu₂I₂ clusters via the metalloligand strategy.

Mixed-metal MIL-100(Sc,M) (M=Al, Cr, Fe) for Lewis acid catalysis and tandem C-C bond formation and alcohol oxidation

The trivalent metal cations Al(3+) , Cr(3+) , and Fe(3+) were each introduced, together with Sc(3+) , into MIL-100(Sc,M) solid solutions (M=Al, Cr, Fe) by direct synthesis. The substitution has been confirmed by powder X-ray diffraction (PXRD) and solid-state NMR, UV/Vis, and X-ray absorption (XAS) spectroscopy. Mixed Sc/Fe MIL-100 samples were prepared in which part of the Fe is present as α-Fe2 O3 nanoparticles within the mesoporous cages of the MOF, as shown by XAS, TGA, and PXRD. The catalytic activity of the mixed-metal catalysts in Lewis acid catalysed Friedel-Crafts additions increases with the amount of Sc present, with the attenuating effect of the second metal decreasing in the order Al>Fe>Cr. Mixed-metal Sc,Fe materials give acceptable activity: 40 % Fe incorporation only results in a 20 % decrease in activity over the same reaction time and pure product can still be obtained and filtered off after extended reaction times. Supported α-Fe2 O3 nanoparticles were also active Lewis acid species, although less active than Sc(3+) in trimer sites. The incorporation of Fe(3+) into MIL-100(Sc) imparts activity for oxidation catalysis and tandem catalytic processes (Lewis acid+oxidation) that make use of both catalytically active framework Sc(3+) and Fe(3+) . A procedure for using these mixed-metal heterogeneous catalysts has been developed for making ketones from (hetero)aromatics and a hemiacetal.

Cascade reactions catalyzed by metal organic frameworks

Cascade or tandem reactions where two or more individual reactions are carried out in one pot constitute a clear example of process intensification, targeting the maximization of spatial and temporal productivity with mobilization of minimum resources. In the case of catalytic reactions, cascade processes require bi-/multifunctional catalysts that contain different classes of active sites. Herein, we show that the features and properties of metal-organic frameworks (MOFs) make these solids very appropriate materials for the development of catalysts for cascade reactions. Due to composition and structure, MOFs can incorporate different types of sites at the metal nodes, organic linkers, or at the empty internal pores, allowing the flexible design and synthesis of multifunctional catalysts. After some introductory sections on the relevance of cascade reactions from the point of view of competitiveness, sustainability, and environmental friendliness, the main part of the text provides a comprehensive review of the literature reporting the use of MOFs as heterogeneous catalysts for cascade reactions including those that combine in different ways acid/base, oxidation/reduction, and metal-organic centers. The final section summarizes the current state of the art, indicating that the development of a first commercial synthesis of a high-added-value fine chemical will be a crucial milestone in this area.

A copper(i)/copper(ii)–salen coordination polymer as a bimetallic catalyst for three-component Strecker reactions and degradation of organic dyes

A copper(i)/copper(ii)–salen coordination polymer prepared by solvothermal reactions shows prominent bimetallic catalytic activities towards three-component Strecker reactions and photodegradation of organic dyes under visible-light illumination.

Fe₃O₄@MOF core-shell magnetic microspheres as excellent catalysts for the Claisen-Schmidt condensation reaction

Separation and recycling of catalysts after catalytic reactions are critically required to reduce the cost of catalysts as well as to avoid the generation of waste in industrial applications. In this work, we present a facile fabrication and characterization of a novel type of MOF-based porous catalyst, namely, Fe₃O₄@MIL-100(Fe) core-shell magnetic microspheres. It has been shown that these catalysts not only exhibit high catalytic activities for the Claisen-Schmidt condensation reactions under environmentally friendly conditions, but remarkably, they can be easily separated and recycled without significant loss of catalytic efficiency after being used for many times. Therefore, compared to other reported catalysts used in the Claisen-Schmidt condensation reactions, these catalysts are green, cheap and more suitable for large scale industrial applications.

Metal–organic frameworks as solid catalysts for the synthesis of nitrogen-containing heterocycles

This Critical Review summarizes the recent developments in the use of metal–organic frameworks as catalysts for the synthesis of nitrogen-containing heterocycles.

Sustainable catalysis: rational Pd loading on MIL-101Cr-NH2 for more efficient and recyclable Suzuki-Miyaura reactions

Palladium nanoparticles have been immobilized into an amino-functionalized metal-organic framework (MOF), MIL-101Cr-NH2, to form Pd@MIL-101Cr-NH2. Four materials with different loadings of palladium have been prepared (denoted as 4-, 8-, 12-, and 16 wt%Pd@MIL-101Cr-NH2). The effects of catalyst loading and the size and distribution of the Pd nanoparticles on the catalytic performance have been studied. The catalysts were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), N2-sorption isotherms, elemental analysis, and thermogravimetric analysis (TGA). To better characterize the palladium nanoparticles and their distribution in MIL-101Cr-NH2, electron tomography was employed to reconstruct the 3D volume of 8 wt%Pd@MIL-101Cr-NH2 particles. The pair distribution functions (PDFs) of the samples were extracted from total scattering experiments using high-energy X-rays (60 keV). The catalytic activity of the four MOF materials with different loadings of palladium nanoparticles was studied in the Suzuki-Miyaura cross-coupling reaction. The best catalytic performance was obtained with the MOF that contained 8 wt% palladium nanoparticles. The metallic palladium nanoparticles were homogeneously distributed, with an average size of 2.6 nm. Excellent yields were obtained for a wide scope of substrates under remarkably mild conditions (water, aerobic conditions, room temperature, catalyst loading as low as 0.15 mol%). The material can be recycled at least 10 times without alteration of its catalytic properties.

The Chemistry and Applications of Metal-Organic Frameworks

Crystalline metal-organic frameworks (MOFs) are formed by reticular synthesis, which creates strong bonds between inorganic and organic units. Careful selection of MOF constituents can yield crystals of ultrahigh porosity and high thermal and chemical stability. These characteristics allow the interior of MOFs to be chemically altered for use in gas separation, gas storage, and catalysis, among other applications. The precision commonly exercised in their chemical modification and the ability to expand their metrics without changing the underlying topology have not been achieved with other solids. MOFs whose chemical composition and shape of building units can be multiply varied within a particular structure already exist and may lead to materials that offer a synergistic combination of properties.

Strategies for Creating Active Sites in MOFs

This chapter presents a general overview of the main properties of MOFs that make them very appealing for applications in heterogeneous catalysis. Great efforts have been directed in the last decade to study the potential of MOFs in catalysis. We will now see what is behind this “MOF rush”. Next, we will present some general considerations that should be taken into account when planning the use of MOFs as heterogeneous catalysts, such as stability, recovery and reusability. And finally, we will review the different strategies that can be used to introduce the desired catalytic centers into the MOFs. We will show how it is possible by using these strategies to engineer the material for catalysis, and to fine tune the properties of the MOF to influence the catalytic performance.