Stretchable and Conductive Composite Structural Color Hydrogel Films as Bionic Electronic Skins

Polymerizable rotaxane hydrogels for three-dimensional printing fabrication of wearable sensors

While hydrogels enable a variety of applications in wearable sensors and electronic skins, they are susceptible to fatigue fracture during cyclic deformations owing to their inefficient fatigue resistance. Herein, acrylated β-cyclodextrin with bile acid is self-assembled into a polymerizable pseudorotaxane via precise host-guest recognition, which is photopolymerized with acrylamide to obtain conductive polymerizable rotaxane hydrogels (PR-Gel). The topological networks of PR-Gel enable all desirable properties in this system due to the large conformational freedom of the mobile junctions, including the excellent stretchability along with superior fatigue resistance. PR-Gel based strain sensor can sensitively detect and distinguish large body motions and subtle muscle movements. The three-dimensional printing fabricated sensors of PR-Gel exhibit high resolution and altitude complexity, and real-time human electrocardiogram signals are detected with high repeating stability. PR-Gel can self-heal in air, and has highly repeatable adhesion to human skin, demonstrating its great potential in wearable sensors.

Development of 3D-Printed, Biodegradable, Conductive PGSA Composites for Nerve Tissue Regeneration

Nerve conduits are used to reconnect broken nerve bundles and provide protection to facilitate nerve regeneration. However, the low degradation rate and regeneration rate, as well as the requirement for secondary surgery are some of the most criticized drawbacks of existing nerve conduits. With high processing flexibility from the photo-curability, poly (glycerol sebacate) acrylate (PGSA) is a promising material with tunable mechanical properties and biocompatibility for the development of medical devices. Here, polyvinylpyrrolidone (PVP), silver nanoparticles (AgNPs), and graphene are embedded in biodegradable PGSA matrix. The polymer composites are then assessed for their electrical conductivity, biodegradability, three-dimensional-printability (3D-printability), and promotion of cell proliferation. Through the four-probe technique, it is shown that the PGSA composites are identified as highly conductive in swollen state. Furthermore, biodegradability is evaluated through enzymatic degradation and facilitated hydrolysis. Cell proliferation and guidance are significantly promoted by three-dimensional-printed microstructures and electrical stimulation on PGSA composites, especially on PGSA-PVP. Hence, microstructured nerve conduits are 3D-printed with PGSA-PVP. Guided cell growth and promoted proliferation are subsequently demonstrated by Schwann cell culture combined with electrical stimulation. Consequently, 3D-printed nerve conduits fabricated with PGSA composites hold great potential in nerve tissue regeneration through electrical stimulation.

Pruney Finger-Inspired Switchable Surface with Water-Actuated Dynamic Textures

Switchable surfaces play an important role in the development of functional materials. However, the construction of dynamic surface textures remains challenging due to the complicated structural design and surface patterning. Herein, a pruney finger-inspired switchable surface (PFISS) is developed by constructing water-sensitive surface textures on a polydimethylsiloxane substrate by taking advantage of the hygroscopicity of the inorganic salt filler and the 3D printing technology. Like human fingertips, the PFISS shows high water sensitivity with obvious surface variation in wet and dry states, which is actuated by water absorption-desorption of the hydrotropic inorganic salt filler. Besides, when the fluorescent dye is optionally added into the matrix of the surface texture, water-responsive fluorescent emitting is observed, providing a feasible surface-tracing strategy. The PFISS shows effective regulation of the surface friction and performs a good antislip effect. The reported synthetic strategy for the PFISS offers a facile way for building a wide range of switchable surfaces.

Bio-inspired ionic skins for smart medicine

Ionic skins are developed to mimic the mechanical properties and functions of natural skins. They have demonstrated substantial advantages to serve as the crucial interface to bridge the gap between humans and machines. The first-generation ionic skin is a stretchable capacitor comprising hydrogels as the ionic conductors and elastomers as the dielectrics, and realizes pressure and strain sensing through the measurement of the capacitance. Subsequent advances have been made to improve the mechanical properties of ionic skins and import diverse functions. For example, ultrahigh stretchability, strong interfacial adhesion, self-healing, moisturizing ability, and various sensing capabilities have been achieved separately or simultaneously. Most ionic skins are attached to natural skins to monitor bio-electrical signals continuously. Ionic skins have also been found with significant potential to serve as a smart drug-containing reservoir, which can release drugs spatially, temporally, and in a controllable way. Herein, this review focuses on the design and fabrication of ionic skins, and their applications related to smart medicine. Moreover, challenges and opportunities are also discussed. It is hoped that the development of bio-inspired ionic skins will provide a paradigm shift for self-diagnosis and healthcare.

Recent advances in liver-on-chips: Design, fabrication, and applications

The liver is a multifunctional organ and the metabolic center of the human body. Most drugs and toxins are metabolized in the liver, resulting in varying degrees of hepatotoxicity. The damage of liver will seriously affect human health, so it is very important to study the prevention and treatment of liver diseases. At present, there are many research studies in this field. However, most of them are based on animal models, which are limited by the time-consuming processes and species difference between human and animals. In recent years, liver-on-chips have emerged and developed rapidly and are expected to replace animal models. Liver-on-chips refer to the use of a small number of liver cells on the chips to simulate the liver microenvironment and ultrastructure in vivo. They hold extensive applications in multiple fields by reproducing the unique physiological functions of the liver in vitro. In this review, we first introduced the physiology and pathology of liver and then described the cell system of liver-on-chips, the chip-based liver models, and the applications of liver-on-chips in liver transplantation, drug screening, and metabolic evaluation. Finally, we discussed the currently encountered challenges and future trends in liver-on-chips.

Recent advances in conductive hydrogels: classifications, properties, and applications

Hydrogel-based conductive materials for smart wearable devices have attracted increasing attention due to their excellent flexibility, versatility, and outstanding biocompatibility. This review presents the recent advances in multifunctional conductive hydrogels for electronic devices. First, conductive hydrogels with different components are discussed, including pure single network hydrogels based on conductive polymers, single network hydrogels with additional conductive additives (i.e., nanoparticles, nanowires, and nanosheets), double network hydrogels based on conductive polymers, and double network hydrogels with additional conductive additives. Second, conductive hydrogels with a variety of functionalities, including self-healing, super toughness, self-growing, adhesive, anti-swelling, antibacterial, structural color, hydrophobic, anti-freezing, shape memory and external stimulus responsiveness are introduced in detail. Third, the applications of hydrogels in flexible devices are illustrated (i.e., strain sensors, supercapacitors, touch panels, triboelectric nanogenerator, bioelectronic devices, and robot). Next, the current challenges facing hydrogels are summarized. Finally, an imaginative but reasonable outlook is given, which aims to drive further development in the future.

A multifunctional structural coloured electronic skin monitoring body motion and temperature

Multifunctional e-skins provide information on physiological and environmental parameters. However, the development and fabrication of such devices is challenging. Here, structural coloured electronic skins are presented, which are prepared via scalable methods that can simultaneously monitor the skin temperature and body motion when patched onto the human skin.

Silk fibroin hydrogels for biomedical applications

Silk fibroin hydrogels occupy an essential position in the biomedical field due to their remarkable biological properties, excellent mechanical properties, flexible processing properties, as well as abundant sources and low cost. Herein, we introduce the unique structures and physicochemical characteristics of silk fibroin, including mechanical properties, biocompatibility, and biodegradability. Then, various preparation strategies of silk fibroin hydrogels are summarized, which can be divided into physical cross-linking and chemical cross-linking. Emphatically, the applications of silk fibroin hydrogel biomaterials in various biomedical fields, including tissue engineering, drug delivery, and wearable sensors, are systematically summarized. At last, the challenges and future prospects of silk fibroin hydrogels in biomedical applications are discussed.

Flexible Aggregation-Induced Emission-Active Hydrogel for On-Site Monitoring of Pesticide Degradation

Benefiting from the stimuli-responsive property and powerful loading capacity, functionalized hydrogels are favorable for the fabrication of sensing devices. Herein, we design aggregation-induced emission (AIE)-active hydrogel discs by embedding gold nanoclusters@zeolite-like imidazole framework (AuNCs@ZIF) composites in double-network hydrogels to build a sensitive pesticide biosensor. The hydrogel discs integrate an AIE effect of AuNCs, a stimuli-responsive property of ZIF, and a porous network structure of the hydrogel, which enhances the sensing sensitivity via boosting the stable fluorescent signal and antifouling performance. In conjunction with a homemade device, the fluorescence images of hydrogel discs could be transduced into data information for accurate quantification of chlorpyrifos pesticide with a detection limit of 0.2 ng/mL. The dynamic degradation of chlorpyrifos in Chinese cabbage is demonstrated to confirm the practical application of hydrogel discs. Such AIE-active hydrogel discs could be a plant health sensor for the on-site quantification of pesticide residues on crops, holding great promise for precision agriculture.

Hierarchically Porous Films Architectured by Self-Assembly of Prolamins at the Air-Liquid Interface

Artificial recapitulation of hierarchically porous films gained great interest due to their versatile functionalities and applications. However, the development of novel eco-friendly and nontoxic biopolymer-based porous films is still limited by the time-consuming fabrication processes and toxic organic reagents involved. Here, we reported a novel approach to rapidly (within 5 s) fabricate biopolymer-based hierarchically porous films via inducing the laterally occurring interfacial self-assembly of prolamins at the air-liquid interface during an antisolvent dripping procedure. The as-prepared films exhibited a hierarchically porous microstructure (with sizes of about 500 nm to 5 μm) with location-graded and Janus features. The formation mechanism involved the solvent gradient controlled self-assembly of prolamin into an anisotropic defect structure in longitudinal and lateral directions. Accordingly, the macroscopic morphologies together with the porosity and pore size could be precisely tuned by solvents and operating parameters in a convenient way. Furthermore, alcohol-soluble but water-insoluble bioactive compounds could be incorporated simultaneously via a one-step loading procedure, which endowed films with large loading efficiency and sustained release features suitable for controlled release applications. The effect of the curcumin-loaded porous film on skin wound healing, as one of the potential applications of this novel material, was then investigated in vivo in a full-thickness wound model, wherein satisfying wound healing effects were achieved through multitarget and multipathway mechanisms. This pioneering work offers a novel strategy for the rapid architecture of biopolymer-based hierarchically porous film with versatile application potentials.

Silver-Reduced Poly(Ethylene Glycol) Diacrylate Composites with Microline Arrays for Directional Bending Sensors

Herein, a soft and flexible polymer composite sensor with a surface structure is manufactured that is sensitive to a wide range of mechanical stimuli, including small actions and large motions. A polymer sensor performing with a piezoresistive mechanism is proposed by synthesizing a new conductive polymer composite to fabricate a microline structure by itself, named Ag-reduced poly(ethylene glycol) diacrylate (PEGDA) composite directional bending sensor (ACBS). A simple but effective process of forming nanoparticles (NPs) and surface structures is a notable characteristic. High sensitivity to a small stimulus was achieved by forming Ag NPs within PEGDA, particularly concentrating on the surface and applying the microline structure. With the structural characteristics of a line structure, the ACBS achieved anisotropic sensitivity to bulk motion along the arranged line direction. The excellent sensitivity of this polymer sensor was experimentally demonstrated via water droplets, blowing, and breathing. Combining the advantages of a simple synthetic and simple fabrication process along with the fabrication ability of the microsurface structure with the material itself and the conductive Ag/PEGDA integrated layer, this ACBS is outstanding as a soft and flexible polymer composite sensor and has potential application in physical devices such as wearable devices and biosensors.

Natural Polymer‐Derived Bioscaffolds for Peripheral Nerve Regeneration

In recent decades, artificial nerve scaffolds have become a promising substitute for peripheral nerve repair. Considerable efforts have been devoted to improving the therapeutic effectiveness of artificial scaffolds. Among numerous biomaterials for tissue engineering scaffolds fabrication, natural polymers are considered as tremendous candidates because of their excellent biocompatibility, low toxicity, high cell affinity, wide source, and environmental protection. With the development of engineering technology, a variety of natural polymer‐derived nerve scaffolds have emerged, which are endowed with biological properties and appropriate physicochemical performances to gradually adapt to the needs of nerve regeneration. Significantly, the intergradation of exogenous biomolecules onto the artificial scaffolds is able to avoid low stability, rapid degradation, and redistribution of direct therapeutic drugs in vivo, thereby enhancing nerve regeneration and functional reconstruction. Here, the development of nerve scaffolds derived from natural polymers, and their applications in continuous administration and peripheral nerve regeneration are comprehensively and carefully reviewed, providing an advanced perspective of the field.

Point-of-Care Immunoassay Based on a Multipixel Dual-Channel Pressure Sensor Array with Visual Sensing Capability of Full-Color Switching and Reliable Electrical Signals

The point-of-care (POC) method with affordability and portability for the sensitive detection of biological substances is an emerging topic in rapid disease screening and personalized medicine. In this work, we demonstrated a diverse responsive platform based on a dual-channel pressure sensor (DCPS). The DCPS had a multilayer flexible architecture consisting of a photonic hydrogel with chromatic transitions and a piezoresistive pressure sensor as the electrical data transmission unit, both of which had the property of pressure-induced mechanical stimulus feedback. By incorporating a platinum nanoparticles-labeled detection antibody (PtNPs-dAb) into the sandwich-type immunoreaction for the target carcinoembryonic antigen (CEA, as a model analyte), gas decomposition could be triggered by the addition of hydrogen peroxide (H₂O₂) to induce a significant increase under pressure in a closed chamber. Meanwhile, the DCPS enabled an accurate electrical signal output, and the photonic hydrogel converted spatiotemporal stimuli into eye-readable colorations with string brilliance. In this way, the target concentration could be quantificationally related to the electrical response and intuitively perceived through visible color alterations. Under optimal conditions, a sensitive determination of CEA was performed in a detectable range of 0.3-60 ng/mL with a limit of detection (LOD) of 0.13 ng/mL. In addition, the proposed protocol had satisfactory selectivity, accuracy, and reproducibility. Furthermore, an array-based immunoassay device was fabricated to conceptually validate its application potential in high-throughput biomedical detection and inspire a dual-signal POC diagnostic platform in a friendly way for resource-limited settings.

Tough, Anti-Swelling Supramolecular Hydrogels Mediated by Surfactant-Polymer Interactions for Underwater Sensors

It is a great challenge for traditional hydrogel-based sensors to be effective underwater due to unsatisfactory water resistance and insufficient wet adhesion. Herein, a tough supramolecular hydrogel aiming at underwater sensing is prepared by the modification of hydrophilic poly(acrylic acid) (PAA) with a small amount of hydrophobic lauryl methacrylate (LMA) in the presence of high concentrations of the cationic surfactant cetyltrimethylammonium bromide (CTAB). Owing to the synergistic effects of the electrostatic interactions and hydrophobic associations of CTAB with the P(AA-co-LMA) copolymer, the hydrogel with a water content of approximately 58.5 wt % demonstrates outstanding anti-swelling feature, superior tensile strength (≈1.6 MPa), large stretchability (>900%), rapid room-temperature self-recovery (≈3 min at 100% strain), and robust wet adhesion to diverse substrates. Moreover, the strain sensor based on the hydrogel displays keen sensitivity in a sensing range of 0-900% (gauge factor is 0.42, 3.44, 5.44, and 7.39 in the strain range of 0-100, 100-300, 300-500, and 500-900%, respectively) and pronounced stability both in air and underwater. Additionally, the hydrogel can be easily recycled by dissolving in anhydrous ethanol. This work provides a facile strategy to fabricate eco-friendly, tough supramolecular hydrogels for underwater sensing.

Toward High Sensitivity: Perspective on Colorimetric Photonic Crystal Sensors

The sensitivity of colorimetric photonic crystal (PC) sensors have been significantly improved with the advancement of deformable structural color materials, structures design, sensing signal analysis methods, and fabrication strategies. In this perspective, the strategies toward high-sensitivity colorimetric PC sensors are discussed, from the perspectives of molecular design, single sensor construction, and multisensor assembly, which include incorporation of flexible polymer chains, construction of strong sensor-analyte interactions, incorporation of more soft materials, construction of stimuli-angle/orientation relationship, design of colorimetric sensors in series, and assembly of colorimetric PC sensors in parallel. Based on these strategies, progress of high-sensitivity colorimetric PC sensors in recent years is summarized, in terms of mechano-sensors and chemo-/biosensors. Specifically, PC based optical-electrical dual-signal sensing devices are included. Finally, the future development and challenges of high-sensitivity colorimetric PC sensors are presented, in regards to deformable properties, optical properties, analysis methods, and fabrication strategies.

Low-Angle-Dependent Anticounterfeiting Label Decoded by Alcohol Tissue Wiping Based on a Multilayer Photonic Crystal Structure

The application of photonic crystals (PCs) as anticounterfeiting materials has been widely investigated because of their tunable photonic stop band and corresponding changeable structural colors. In this work, we designed a composite PC structure including an information CdS PC layer at the bottom and a polymer-based layer composed of an inverse opal PC (IOPC) layer and a disordered porous layer on the top, which can be decoded by an alcohol tissue. The high refractive index of the bottom patterned CdS PC layer provides the structure with a vivid low-angle-dependent structural color in the decoded mode, which ensures the stability of the information conveyed by this label. When the incident angle changed from 5 to 45°, the structural color of the patterned CdS layer changed slightly. In the hidden mode, the low transmittance shields the structural color of the CdS layer. When the structure was wiped with the alcohol tissue, the transmittance of the upper IOPC layer could be increased quickly due to the similar refractive indexes of the used polymer and alcohol, and the pattern of the CdS layer was decoded. Thus, the designed composite PC can act as an anticounterfeiting label, in which the encrypted pattern can be decoded by alcohol tissue wiping and shows a vivid low-angle-dependent structural color. To enhance the anticounterfeiting ability of the designed structure, a double-sided label with different encryption patterns on both sides was designed. Based on the simple reversible encryption and decryption process as well as the color stability, the label shows great application potential in the daily anticounterfeiting field.

Ordered micropattern arrays fabricated by lung-derived dECM hydrogels for chemotherapeutic drug screening

AIMS

This study aims to evaluate ECM-coated micropattern arrays derived from decellularization of native porcine lungs as a novel three-dimensional cell culture platform.

METHODS

ECM derived from decellularization of native porcine lungs was exploited to prepare hydrogels. Then, dECM-coated micropattern arrays were fabricated at four different diameters (50, 100, 150 and 200 ​μm) using polydimethylsiloxane (PDMS). Two lung cancer cell lines, A549 and H1299, were tested on a dECM-coated micropattern array as a novel culture platform for cell adhesion, distribution, proliferation, viability, phenotype expression, and drug screening to evaluate the cytotoxicity of paclitaxel, doxorubicin and cisplatin.

RESULTS

The ECM derived from decellularization of native porcine lungs supported cell adhesion, distribution, viability and proliferation better than collagen I and Matrigel as the coated matrix on the surface. Moreover, the optimal diameter of the micropattern arrays was 100-150 ​μm, as determined by measuring the morphology, viability, proliferation and phenotype of the cancer cell spheroids. Cell spheroids of A549 and H1299 on dECM-coated micropattern arrays showed chemoresistance to anticancer drugs compared to that of the monolayer. The different distributions of HIF-1α, MCL-1 (in the center) and Ki-67 and MRP2 (in the periphery) of the spheroids demonstrated the good establishment of basal-lateral polarity and explained the chemoresistance phenomenon of spheroids.

CONCLUSIONS

This novel three-dimensional cell culture platform is stable and reliable for anticancer drug testing. Drug screening in dECM-coated micropattern arrays provides a powerful alternative to existing methods for drug testing and metabolic profiling in the drug discovery process.

A button switch inspired duplex hydrogel sensor based on both triboelectric and piezoresistive effects for detecting dynamic and static pressure

The capability to sense complex pressure variations comprehensively is vital for wearable electronics and flexible human–machine interfaces. In this paper, inspired by button switches, a duplex tactile sensor based on the combination of triboelectric and piezoresistive effects is designed and fabricated. Because of its excellent mechanical strength and electrical stability, a double-networked ionic hydrogel is used as both the conductive electrode and elastic current regulator. In addition, micro-pyramidal patterned polydimethylsiloxane (PDMS) acts as both the friction layer and the encapsulation elastomer, thereby boosting the triboelectric output performance significantly. The duplex hydrogel sensor demonstrates comprehensive sensing ability in detecting the whole stimulation process including the dynamic and static pressures. The dynamic stress intensity (10–300 Pa), the action time, and the static variations (increase and decrease) of the pressure can be identified precisely from the dual-channel signals. Combined with a signal processing module, an intelligent visible door lamp is achieved for monitoring the entire “contact–hold–release–separation” state of the external stimulation, which shows great application potential for future smart robot e-skin and flexible electronics.

Smart Polycationic Hydrogel Dressing for Dynamic Wound Healing

It is challenging for traditional wound dressings to adapt to the complex and changeable environment, due to the lack of stable, efficient, and continuous bactericidal activity. They also cannot be satisfied in a multifunctional sensing platform to reconstruct skin sensory functions for human health monitoring. A multifunctional hydrogel dressing is developed here for the treatment of infected wounds and human health monitoring, which is based on alginate and polycation. The in situ polymerization and solvent displacement method are used to functionalize the hydrogel for the improvement of antifreezing, water retention, and environmental adaptability, as well as the adhesion and photothermal property. As a wound dressing, the as-prepared hydrogel exhibits an excellent antibacterial property against both Escherichia coli and Staphylococcus aureus. In a rat model of full-thickness wound infection, it significantly accelerates the healing of infected wounds with a high healing rate of 96.49%. In the further multifunctional sensory tests, the hydrogel shows multiple response modes of strain, pressure and temperature, and sensing stability. An idea is provided here to develop a smart hydrogel dressing that can accelerate wound healing and achieve human health monitoring.

An injectable and self-healing hydrogel with antibacterial and angiogenic properties for diabetic wound healing

The treatment of diabetic wounds remains a global challenge. Compared with traditional wound dressings, there are higher requirements of antibacterial, anti-inflammatory and pro-angiogenic effects in diabetic wound dressings. Furthermore, it is desirable for dressings to self-adapt to wounds with different morphologies without extra processes and stably (suitable adhesive and self-healing abilities) provide a conducive environment for wound healing. Herein, we construct an injectable and self-healing hydrogel through the combination of chitosan (CS) and metal ions to efficiently improve infected and diabetic wound healing. Benefiting from the amino and hydroxy groups, the CS molecular chains are cross-linked with silver ions (Ag⁺) and copper ions (Cu²⁺) to promote the formation of the CS-Ag-Cu hydrogel, which releases Ag⁺ (an antibacterial agent) and Cu²⁺ (an angiogenic agent) over a prolonged period. Moreover, the hydrogel possesses appropriate adhesive ability, good water absorption ability, antibacterial capability and biocompatibility according to in vitro investigations. In vivo experimental results further prove that the CS-Ag-Cu hydrogel can dramatically accelerate tissue repair in a Staphylococcus aureus (S. aureus)-infected skin incision model in normal rats and diabetic wounds.

Bioinspired Polypeptide Photonic Films with Tunable Structural Color

We report a new synthetic strategy of combining N-carboxyanhydride (NCA) chemistry and photonic crystals for the fabrication of polypeptide structural color films. Driven by surface-initiated ring-opening polymerization, the di-NCA derivative of l-cystine (Cys) is introduced to replicate the functionalized colloidal crystal templates and construct freestanding P(Cys) films with tunable structural color. Furthermore, the feasibility of preparing patterned polypeptide photonic films is demonstrated via template microfabrication. Because of the incorporation of l-glutamate (Glu) components, the P(Cys-co-Glu) co-polypeptide films are endowed with a visual color responsiveness toward pH changes. Additionally, the polypeptide photonic films show on-demand degradability. Given the large family of amino acid building blocks, this powerful and versatile approach paves the way for chemical derivatization of multifunctional peptide-based optical platforms.

Pigmented Structural Color Actuators Fueled by Near-Infrared Light

Cuttlefish can modify their body shape and both their pigmentary and structural colors for protection. This adaptability has inspired the development of appearance-changing polymers such as structural color actuators, although in most cases, the original shape has been confined to being flat, and pigmented structural color actuators have not yet been reported. Here, we have successfully created a pigmented structural color actuator using a cholesteric liquid crystal elastomer with a lower actuation temperature where both actuation and coloration (structural and pigmental) are tunable with temperature and NIR light. The shape, structural color, and absorption of the NIR-absorbing dye pigment of the actuator all change with temperature. Light can be used to trigger local in-plane bending actuation in flat films and local shape changes in a variety of 3D-shaped objects. A cuttlefish mimic that can sense light and respond by locally changing its appearance was also made to demonstrate the potential of pigmented structural color actuators for signaling and camouflage in soft robotics.

Ordered micropattern arrays fabricated by lung-derived dECM hydrogels for chemotherapeutic drug screening

Aims

This study aims to evaluate ECM-coated micropattern arrays derived from decellularization of native porcine lungs as a novel three-dimensional cell culture platform.

Methods

ECM derived from decellularization of native porcine lungs was exploited to prepare hydrogels. Then, dECM-coated micropattern arrays were fabricated at four different diameters (50, 100, 150 and 200 ​μm) using polydimethylsiloxane (PDMS). Two lung cancer cell lines, A549 and H1299, were tested on a dECM-coated micropattern array as a novel culture platform for cell adhesion, distribution, proliferation, viability, phenotype expression, and drug screening to evaluate the cytotoxicity of paclitaxel, doxorubicin and cisplatin.

Results

The ECM derived from decellularization of native porcine lungs supported cell adhesion, distribution, viability and proliferation better than collagen I and Matrigel as the coated matrix on the surface. Moreover, the optimal diameter of the micropattern arrays was 100–150 ​μm, as determined by measuring the morphology, viability, proliferation and phenotype of the cancer cell spheroids. Cell spheroids of A549 and H1299 on dECM-coated micropattern arrays showed chemoresistance to anticancer drugs compared to that of the monolayer. The different distributions of HIF-1α, MCL-1 (in the center) and Ki-67 and MRP2 (in the periphery) of the spheroids demonstrated the good establishment of basal-lateral polarity and explained the chemoresistance phenomenon of spheroids.

Conclusions

This novel three-dimensional cell culture platform is stable and reliable for anticancer drug testing. Drug screening in dECM-coated micropattern arrays provides a powerful alternative to existing methods for drug testing and metabolic profiling in the drug discovery process.

•

Lung dECM hydrogels can be used as a beneficial coating matrix for supporting cell adhesion, viability and proliferation.

•

Ordered micropattern arrays provide a novel platform for spheroid formation, phenotype expression and drug screening.

•

The heterogeneous distributions of the cancer spheroids established basal-lateral polarity and explained the chemoresistance.

Ultra-Sensitive, Deformable, and Transparent Triboelectric Tactile Sensor Based on Micro-Pyramid Patterned Ionic Hydrogel for Interactive Human-Machine Interfaces

Rapid advances in wearable electronics and mechno-sensational human-machine interfaces impose great challenges in developing flexible and deformable tactile sensors with high efficiency, ultra-sensitivity, environment-tolerance, and self-sustainability. Herein, a tactile hydrogel sensor (THS) based on micro-pyramid-patterned double-network (DN) ionic organohydrogels to detect subtle pressure changes by measuring the variations of triboelectric output signal without an external power supply is reported. By the first time of pyramidal-patterned hydrogel fabrication method and laminated polydimethylsiloxane (PDMS) encapsulation process, the self-powered THS shows the advantages of remarkable flexibility, good transparency (≈85%), and excellent sensing performance, including extraordinary sensitivity (45.97 mV Pa-1 ), fast response (≈20 ms), very low limit of detection (50 Pa) as well as good stability (36 000 cycles). Moreover, with the LiBr immersion treatment method, the THS possesses excellent long-term hyper anti-freezing and anti-dehydrating properties, broad environmental tolerance (-20 to 60 °C), and instantaneous peak power density of 20 µW cm-2 , providing reliable contact outputs with different materials and detecting very slight human motions. By integrating the signal acquisition/process circuit, the THS with excellent self-power sensing ability is utilized as a switching button to control electric appliances and robotic hands by simulating human finger gestures, offering its great potentials for wearable and multi-functional electronic applications.

Robust Large-Sized Photochromic Photonic Crystal Film for Smart Decoration and Anti-Counterfeiting

Photochromic materials are widely investigated due to their vivid color transformation for many real applications. In this work, a new kind of multiangle photochromic photonic crystal (PC) material with high robustness and long durability for smart phone decoration and anticounterfeiting features is fabricated. After thermal mixing of spiropyran powder and monodisperse core-interlayer-shell (CIS) particles, a large-area and high-quality photochromic PC film has been prepared by the self-designed bending-induced ordering technique (BIOT). The spiropyran powder can be well dispersed in the order-structured PC system, so the perfect synergistic combination of photochromism and angle-dependent structure colors can be achieved. The color-switching test for the as-prepared photochromic PC film proved its excellent reversibility and stability. Because of the excellent flexibility of the photo-cross-linked PC films, they can be designed and cut into various shapes with high robustness and long durability. Interestingly, a temperature-controlled photochromic effect was found in this photochromic PC system. Therefore, the as-prepared photochromic PC films can play a significant role in the fields of smart decoration and anticounterfeiting by their unique color switching effects under different stimuli. More importantly, our work verified the feasibility of this route to prepare a series of large-sized advanced smart PC devices by adding versatile functional materials.

Highly transparent, self-healing and adhesive wearable ionogel as strain and temperature sensor

A stable ionogel with good self-healing capability and adhesion, excellent stretchability (2017%), high durability (1000 cycles) and high transparency (92%) is fabricated and assembled into a strain and temperature sensor with high sensitivity.

Graphene oxide composite hydrogels for wearable devices

For graphene oxide (GO) composite hydrogels, a two-dimensional GO material is introduced into them, whose special structure is used to improve their properties. GO contains abundant oxygen-containing functional groups, which can improve the mechanical properties of hydrogels and support the application needs. Especially, the unique-conjugated structure of GO can endow or enhance the stimulation response of hydrogels. Therefore, GO composite hydrogels have a great potential in the field of wearable devices. We referred to the works published in recent years, and reviewed from these aspects: (a) structure of GO; (b) factors affecting the mechanical properties of the composite hydrogel, including hydrogen bond, ionic bond, coordination bond and physical crosslinking; (c) stimuli and signals; (d) challenges. Finally, we summarized the research progress of GO composite hydrogels in the field of wearable devices, and put forward some prospects.