Crystal engineering: a holistic view

A Strategy for Polar Crystals with Dipolar Heterohelicenes

Polar crystals have attracted interest for the applications to polar materials with piezo- and pyroelectricity, and second harmonic generation. Despite their potential utility for flexible polar materials, a strategy for ordering polar helicenes have remained elusive. Here, we demonstrate creation of polar crystal with unsymmetrically substituted aza[5]helicenes tuned by substituents. The usymmetric aza[5]helicenes have been prepared through regioselective monoprotiodesilylations. We disclosed triisopropylsilyl-substituted derivatives show 1D chain columnar packings. In particular, enantiopure crystals showed spontaneous polarization. Optical and single-crystal X-ray diffraction experiments with other derivatives, as well as theoretical calculations, revealed that the presence of triisopropylsilyl or electron-withdrawing aryl substituents is essential for forming the 1D chain columnar structure. Hirshfeld surface analyses further showed that CH-π interactions between 1D chain columns regulate the polar assembly. Finally, we determined the polarizability of the nitro derivative by ab initio calculation to be 4.53 µC/cm 2 . This value corroborates the first example of a spontaneously polar crystal of helicenes. We believe that this study will contribute to the development of polar materials from organic molecules.

Minimal Basis Set Hartree-Fock Corrected with Atom-Centered Potentials for Molecular Crystal Modeling and Crystal Structure Prediction

Crystal structure prediction (CSP), determining the experimentally observable structure of a molecular crystal from the molecular diagram, is an important challenge with technologically relevant applications in materials manufacturing and drug design. For the purpose of screening the randomly generated candidate crystal structures, CSP protocols require energy ranking methods that are fast and can accurately capture the small energy differences between molecular crystals. In addition, a good ranking method should also produce accurate equilibrium geometries, both intramolecular and intermolecular. In this article, we explore the combination of minimal-basis-set Hartree-Fock (HF) with atom-centered potentials (ACPs) as a method for modeling the structure and energetics of molecular crystals. The ACPs are developed for the H, C, N, and O atoms and fitted to a set of reference data at the B86bPBE-XDM level in order to mitigate basis-set incompleteness and missing correlation. In particular, ACPs are developed in combination with two methods: HF-D3/MINIs and HF-3c. The application of ACPs greatly improves the performance of HF-D3/MINIs for lattice energies, crystal energy differences, energy-volume and energy-strain relations, and crystal geometries. In the case of HF-3c, the improvement in the crystal energy differences is much smaller than in HF-D3/MINIs, but lattice energies and particularly crystal geometries are considerably better when ACPs are used. The resulting methods may be useful for CSP but also for quick calculation of molecular crystal lattice energies and geometries.

Hydrogen-bonded organic framework biomimetic entrapment allowing non-native biocatalytic activity in enzyme

Nature programs the structural folding of an enzyme that allows its on-demand biofunctionality; however, it is still a long-standing challenge to manually modulate an enzyme’s conformation. Here, we design an exogenous hydrogen-bonded organic framework to modulate the conformation of cytochrome c, and hence allow non-native bioactivity for the enzyme. The rigid hydrogen-bonded organic framework, with net-arranged carboxylate inner cage, is in situ installed onto the native cytochrome c. The resultant hydrogen-bonded nano-biointerface changes the conformation to a previously not achieved catalase-like species within the reported cytochrome c-porous organic framework systems. In addition, the preserved hydrogen-bonded organic framework can stabilize the encapsulated enzyme and its channel-like pores also guarantee the free entrance of catalytic substrates. This work describes a conceptual nanotechnology for manoeuvring the flexible conformations of an enzyme, and also highlights the advantages of artificial hydrogen-bonded scaffolds to modulate enzyme activity.

Heme units are immobilised in diverse heme enzymes for oxidation, and have been immobilised also in hydrogen-bonded organic frameworks. Here, the authors show the use of hydrogen-bonded organic framework to modulate the enzyme’s conformation and show different biofunction from the original.

A bibliographic survey of the supramolecular architectures sustained by delocalised C–I⋯π(arene) interactions in metal-organic crystals

A survey of the crystallographic literature of metal-organic crystal structures for the presence of C–I···π(arene) interactions where the iodide atom occupies a position close to plumb to the ring centroid, corresponding to a delocalised interaction, and is within the assumed sum of the van der Waals radii, i.e. 3.88 Å, has been undertaken. The majority of the 26 identified examples feature supramolecular chains of varying topology whereby C–I···π(arene) contacts are readily identified and apparently operating independently of other obvious supramolecular synthons. The next most prevalent supramolecular aggregate was zero-dimensional, containing up to a maximum of three molecules. While there were three examples of two-dimensional arrays among a series of isostructural crystal structures, no examples of three-dimensional structures largely sustained by C–I···π(arene) interactions were noted. This distribution of supramolecular aggregation patterns matched that noted for all-organic systems. In terms of the overall adoption rate, delocalised C–I···π(arene) interactions were found in 3% of crystals of metal-organic species where they could form, a percentage lower than 4% noted for all-organic crystals.

Confining enzymes in porous organic frameworks: from synthetic strategy and characterization to healthcare applications

Enzymes are a class of natural catalysts with high efficiency, specificity, and selectivity unmatched by their synthetic counterparts and dictate a myriad of reactions that constitute various cascades in living cells. The development of suitable supports is significant for the immobilization of structurally flexible enzymes, enabling biomimetic transformation in the extracellular environment. Accordingly, porous organic frameworks, including metal organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs), have emerged as ideal supports for the immobilization of enzymes because of their structural features including ultrahigh surface area, tailorable porosity, and versatile framework compositions. Specially, organic framework-encased enzymes have shown significant enhancement in stability and reusability, and their tailorable pore opening provides a gatekeeper-like effect for guest sieving, which is beneficial for mimicking intracellular biocatalysis processes. This immobilization technique brings new insight into the development of next-generation enzyme materials and shows huge potential in healthcare applications, such as biomarker diagnosis, biostorage, and cancer and antibacterial therapies. In this review, we describe the state-of-the-art strategies for the structural immobilization of enzymes using the well-explored MOFs and burgeoning COFs and HOFs as scaffolds, with special emphasis on how these porous framework-confined technologies can provide a favorable microenvironment for mimicking natural biocatalysis. Subsequently, advanced characterization techniques for enzyme conformation, the effect of the confined microenvironment on the activity of enzymes, and the emerging healthcare applications will be surveyed.

Understanding the n → π* non-covalent interaction using different experimental and theoretical approaches

Herein, a perspective on the recent understanding of weak n → π* interaction obtained using different experimental and theoretical approaches is presented. This interaction is purely an orbital interaction that involves the delocalization of the lone pair electrons (n) on nitrogen, oxygen, and sulfur to the π* orbitals of CO, CN, and aromatic rings. The n → π* interaction has been found to profoundly influence the stabilization of peptides, proteins, drugs, and various small molecules. Although the functional properties of this non-covalent interaction are still quite underestimated, there are recent demonstrations of applying this interaction to the regulation of synthetic chemistry, catalysis, and molecular recognition. However, the identification and quantification of the n → π* interaction remain a demanding task as this interaction is quite weak and based on the electron delocalization between the two orbitals, while hyperconjugation interactions between neighboring atoms and the group involved in the n → π* interaction are simultaneously present. This review provides a comprehensive picture of understanding the n → π* interaction using different experimental approaches such as the X-ray diffraction technique, and electronic, NMR, microwave, and IR spectroscopy, in addition to quantum chemistry calculations. A detailed understanding of the n → π* interaction can help in modulating the strength of this interaction, which will be further helpful in designing efficient drugs, synthetic peptides, peptidomimetics, etc.

Steps towards a nature inspired inorganic crystal engineering

This Perspective outlines the results obtained at the University of Bologna by applying crystal engineering strategies to develop nature inspired organic-inorganic materials to tackle challenges in the health and environment sectors. It is shown by means of a number of examples that co-crystallization of inorganic salts, such as alkali and transition metal halides, with organic compounds, such as amino acids, urea, thiourea and quaternary ammonium salts, can be successfully used for (i) chiral resolution and conglomerate formation from racemic compounds, (ii) inhibition of soil enzyme activity in order to reduce urea decomposition and environmental pollution, and (iii) preparation of novel agents to tackle antimicrobial resistance. All materials described in this Perspective have been obtained by mechanochemical solvent-free or slurry methods and characterized by solid state techniques. The fundamental idea is that a crystal engineering approach based on the choice of intermolecular interactions (coordination and hydrogen bonds) between organic and inorganic compounds allows obtaining materials with collective properties that are different, and often very much superior to those of the separate components. It is also demonstrated that the success of this strategy depends crucially on cross-disciplinary synergistic exchange with expert scientists in the areas of bioinorganics, microbiology, and chirality application-oriented developments of these novel materials.

Intermolecular Interactions of 3,5-bis(4-Methoxyphenyl)-4,5-dihydro-1H-pyrazole-1-carbothioamide in a Cocrystal with 1,3-bis(4-Methoxyphenyl)prop-2-en-1-one and Dimethylformamide Solvate

Two new multicomponent crystals consisting of 3,5-bis(4-methoxyphenyl)-4,5-dihydro-1H-pyrazole-1-carbothioamide (1) with 1,3-bis(4-methoxyphenyl)prop-2-en-1-one (2) and with dimethylformamide (DMF), both in 1:1 ratio, prepared and structurally characterized. The occurrence of 1 in different crystal structures enabled a comparison of hydrogen bonding contacts between the two structures as well as with the known structure of pure 1. The backbone of molecule 1 was similar in the structures but the orientation of the methoxy groups varied. Molecule 1 was involved in various combinations of the possible hydrogen bonding contacts, including N–H…O=C, N–H…OMe, and N–H…S. Both N–H hydrogens in the cocrystal (1–2) and the solvate (1-DMF) participated in hydrogen bonding but only one hydrogen atom took part in the structure of pure 1. The S atom accepted contacts in both the structures of pure 1 and cocrystal 1–2 but not in that of the 1-DMF solvate. The oxygen atoms of both methoxy groups acted as acceptors in the structure of pure 1, whereas one oxygen was involved in the 1-DMF solvate and none in cocrystal 1–2.

Experimental and theoretical study of novel amino-functionalized P(V) coordination compounds suggested as inhibitor of MPro of SARS-COV-2 by molecular docking study

Amino-functionalized P(V) derivatives providing both N- and O-donor modes have attracted interest owing to their potential to form interesting coordination assemblies with applications such as biological drugs. Novel coordination modes of two- and four-dentate tris (pyridin-2-yl)phosphoric triamide OP[NH-2Py]3 as ([Co(II){[O][NH-2Py]P(O)[Ph]}2(DMF)2], 1) and ([Cu(II)Cl{[NH-2Py]2P(O)[N-2Py]}].DMF, 2) have been synthesized and structurally studied. The metal center environment is distorted octahedral for 1 and distorted square pyramidal for 2. The crystal structure of a new complex of Cu(II) with a Cu[N]4[Cl]2 environment ([Cu(II)Cl2(Pyrazole)4], 3) is also investigated. An evaluation of the inhibitory effect against the coronavirus (Main Protease [MPro] of SARS-CoV-2) was carried out by a molecular docking study and illustrates that these compounds have a good interaction tendency with CoV-2, where 1 has the best binding affinity with the biological target comparable with other SARS-CoV-2 drugs. Moreover, theoretical QTAIM and natural bond orbital (NBO) calculations are used to evaluate the metal-oxygen/-nitrogen bonds suggesting that they are mainly electrostatic in nature with a slight covalent contribution. A molecular packing analysis using Hirshfeld surface (HS) analysis shows that N-H … O (in 1 and 2) and N-H … Cl (in 3) hydrogen bonds are the dominant interactions that contribute to the crystal packing cohesion. The semi-empirical PIXEL method indicates that the electrostatic and repulsion energy components in the structures of 1 and 2 and the dispersion and electrostatic components in that of 3 are the major contributors to the total lattice energy.

Evaluation of Piperine as Natural Coformer for Eutectics Preparation of Drugs Used in the Treatment of Cardiovascular Diseases

Piperine (PIP) was evaluated as a natural coformer in the preparation of multicomponent organic materials for enhancing solubility and dissolution rate of the poorly water-soluble drugs: curcumin (CUR), lovastatin (LOV), and irbesartan (IBS). A screening based on liquid assisted grinding technique was performed using 1:1 drug-PIP molar ratio mixtures, followed by differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) analyses. Three eutectic mixtures (EMs) composed of CUR-PIP, LOV-PIP, and IBS-PIP were obtained. Therefore, binary phase and Tamman's diagrams were constructed for each system to obtain the exact eutectic composition, which was 0.41:0.59, 0.29:0.71, and 0.31:0.69 for CUR-PIP, LOV-PIP, and IBS-PIP, respectively. Further, bulk materials of each system were prepared to characterize them through DSC, PXRD fully, Fourier transform infrared spectroscopy (FT-IR), and solution-state nuclear magnetic resonance (NMR) spectroscopy. In addition, the contact angle, solubility, and dissolution rate of each system were evaluated. The preserved characteristic in the PXRD patterns and FT-IR spectra of the bulk material of each system confirmed the formation of EM mixture without molecular interaction in solid-state. The formation of EM resulted in improved aqueous solubility and dissolution rate associated with the increased wettability observed by the decrease in contact angle. In addition, solution NMR analyses of CUR-PIP, LOV-PIP, and IBS-PIP suggested no significant intermolecular interactions in solution between the components of the EM. Hence, this study concludes that PIP could be an effective coformer to improve the solubility and dissolution rate of CUR, LOV, and IBS.

The role of solvation in proton transfer reactions: implications for predicting salt/co-crystal formation using the ΔpKa rule

The ΔpK_a rule is commonly applied by chemists and crystal engineers as a guideline for the rational design of molecular salts and co-crystals. For multi-component crystals containing acid and base constituents, empirical evidence has shown that ΔpK_a > 4 almost always leads to salts, ΔpK_a < -1 almost always leads to co-crystals and ΔpK_a between -1 and 4 can be either. This paper reviews the theoretical background of the ΔpK_a rule and highlights the crucial role of solvation in determining the outcome of the potential proton transfer from acid to base. New data on the frequency of the occurrence of co-crystals and salts in multi-component crystal structures containing acid and base constituents show that the relationship between ΔpK_a and the frequency of salt/co-crystal formation is influenced by the composition of the crystal. For unsolvated co-crystals/salts, containing only the principal acid and base components, the point of 50% probability for salt/co-crystal formation occurs at ΔpK_a ≈ 1.4, while for hydrates of co-crystals and salts, this point is shifted to ΔpK_a ≈ -0.5. For acid-base crystals with the possibility for two proton transfers, the overall frequency of occurrence of any salt (monovalent or divalent) versus a co-crystal is comparable to that of the whole data set, but the point of 50% probability for observing a monovalent salt vs. a divalent salt lies at ΔpK_a,II ≈ -4.5. Hence, where two proton transfers are possible, the balance is between co-crystals and divalent salts, with monovalent salts being far less common. Finally, the overall role played by the "crystal" solvation is illustrated by the fact that acid-base complexes in the intermediate region of ΔpK_a tip towards salt formation if ancillary hydrogen bonds can exist. Thus, the solvation strength of the lattice plays a key role in the stabilisation of the ions.

Crystalline hydrogen bonding of water molecules confined in a metal-organic framework

Hydrogen bonding (H-bonding) of water molecules confined in nanopores is of particular interest because it is expected to exhibit chemical features different from bulk water molecules due to their interaction with the wall lining the pores. Herein, we show a crystalline behavior of H-bonded water molecules residing in the nanocages of a paddlewheel metal-organic framework, providing in situ and ex situ synchrotron single-crystal X-ray diffraction and Raman spectroscopy studies. The crystalline H-bond is demonstrated by proving the vibrational chain connectivity arising between hydrogen bond and paddlewheel Cu-Cu bond in sequentially connected Cu-Cu·····coordinating H₂O·····H-bonded H₂O and by proving the spatial ordering of H-bonded water molecules at room temperature, where they are anticipated to be disordered. Additionally, we show a substantial distortion of the paddlewheel Cu²⁺-centers that arises with water coordination simultaneously. Also, we suggest the dynamic coordination bond character of the H-bond of the confined water, by which an H-bond transitions to a coordination-bond at the Cu²⁺-center instantaneously after dissociating a previously coordinated H₂O.

New Co-Crystals/Salts of Gallic Acid and Substituted Pyridines: An Effect of Ortho-Substituents on the Formation of an Acid–Pyridine Heterosynthon

Co-crystallization of gallic acid with pyridines and their polyaromatic analogue, quinoline, ortho-substituted by various proton-donating groups able to form hydrogen bonds, produced the only reported co-crystal of gallic acid with an ortho-substituted pyridine, 2-hydroxypyridine, as its preferred pyridone-2 tautomer, and four new crystalline products of gallic acid. These co-crystals, or gallate salts depending on the choice of the pyridine-containing compound, as predicted by the pKa rule, were identified by X-ray diffraction to feature the popular acid–pyridine heterosynthon found in most of the two-component systems of gallic acid that lack ortho-substituents in the pyridine-containing compound. This single-point heterosynthon is, however, modified by one or two proton-donating ortho-substituents, which sometimes may transform into the proton acceptors in an adopted tautomer or zwitterion, to produce its two- or other multi-point variants, including a very rare four-point heterosynthon. The hydrogen bonds they form with the gallic acid species in the appropriate co-crystals/salts strongly favors the formation of the acid–pyridine heterosynthon over the acid–acid homosynthon. In the competitive conditions of multi-component systems, such a modification might be used to reduce supramolecular-synthon-based polymorphism to produce new pharmaceuticals and other crystalline materials with designed properties.

The long-awaited synthesis and self-assembly of a small rigid C3-symmetric trilactam

The challenging synthesis of a fused C₃-symmetric trilactam (1) was executed in racemic and enantiomerically pure form. The rigidity, symmetry and high density of hydrogen bonding motifs make 1 an attractive candidate for self-assembly study, which revealed different hydrogen bond patterns in the crystals of rac-1-d₃ and (+)-(SSS)-1.

Chemical Diversity for Tailoring Negative Thermal Expansion

Negative thermal expansion (NTE), referring to the lattice contraction upon heating, has been an attractive topic of solid-state chemistry and functional materials. The response of a lattice to the temperature field is deeply rooted in its structural features and is inseparable from the physical properties. For the past 30 years, great efforts have been made to search for NTE compounds and control NTE performance. The demands of different applications give rise to the prominent development of new NTE systems covering multifarious chemical substances and many preparation routes. Even so, the intelligent design of NTE structures and efficient tailoring for lattice thermal expansion are still challenging. However, the diverse chemical routes to synthesize target compounds with featured structures provide a large number of strategies to achieve the desirable NTE behaviors with related properties. The chemical diversity is reflected in the wide regulating scale, flexible ways of introduction, and abundant structure-function insights. It inspires the rapid growth of new functional NTE compounds and understanding of the physical origins. In this review, we provide a systematic overview of the recent progress of chemical diversity in the tailoring of NTE. The efficient control of lattice and deep structural deciphering are carefully discussed. This comprehensive summary and perspective for chemical diversity are helpful to promote the creation of functional zero-thermal-expansion (ZTE) compounds and the practical utilization of NTE.

Antimicrobial activity of supramolecular salts of gallium(III) and proflavine and the intriguing case of a trioxalate complex

The use of the gallium oxalate complex [Ga(ox)3]3- as a building block in the formation of a drug-drug salt with the antimicrobial agent proflavine (PF) as its proflavinium cation (HPF+), namely [HPF]3[Ga(ox)3]·4H2O, is reported together with the preparation of the potassium salt K3[Ga(ox)3] and the novel dimeric gallium(III) salt K4[Ga2(ox)4(μ-OH)2]·2H2O. All compounds have been characterized by solid state methods, and their performance as antimicrobial agents has been evaluated by disk diffusion assay against the bacteria strains Pseudomonas aeruginosa ATCC27853, Staphylococcus aureus ATCC25923, and Escherichia coli ATCC25922. While the [HPF]3[Ga(ox)3]·4H2O drug-drug salt is effective against all three strains, the gallium oxalate salt K3[Ga(ox)3] showed impressive selectivity towards P. aeruginosa, with little to no antimicrobial activity against the other two organisms. This work presents novel breakthroughs towards Ga based antimicrobial agents.

Structural Characterization of Multicomponent Crystals Formed from Diclofenac and Acridines

Multicomponent crystals containing diclofenac and acridine (1) and diclofenac and 6,9-diamino-2-ethoxyacridine (2) were synthesized and structurally characterized. The single-crystal XRD measurements showed that compound 1 crystallizes in the triclinic P-1 space group as a salt cocrystal with one acridinium cation, one diclofenac anion, and one diclofenac molecule in the asymmetric unit, whereas compound 2 crystallizes in the triclinic P-1 space group as an ethanol solvate monohydrate salt with one 6,9-diamino-2-ethoxyacridinium cation, one diclofenac anion, one ethanol molecule, and one water molecule in the asymmetric unit. In the crystals of the title compounds, diclofenac and acridines ions and solvent molecules interact via N–H⋯O, O–H⋯O, and C–H⋯O hydrogen bonds, as well as C–H⋯π and π–π interactions, and form heterotetramer bis[⋯cation⋯anion⋯] (1) or heterohexamer bis[⋯cation⋯ethanol⋯anion⋯] (2). Moreover, in the crystal of compound 1, acridine cations and diclofenac anions interact via N–H⋯O hydrogen bond, C–H⋯π and π–π interactions to produce blocks, while diclofenac molecules interact via C–Cl⋯π interactions to form columns. In the crystal of compound 2, the ethacridine cations interact via C–H⋯π and π–π interactions building blocks, while diclofenac anions interact via π–π interactions to form columns.

Conservation of the Hydrogen-Bonded Pyridone Homosynthon in Halogen-Bonded Cocrystals

Seven cocrystals of pyridone and perfluorinated halocarbons have been prepared. In all cases pairs of pyridone molecules are connected into dimers by two N-H···O hydrogen bonds, forming the characteristic pyridone homosynthon of R₂ ²(8) topology. These dimers further act as acceptors of halogen bonds through the two pyridone oxygen atoms, forming two (in six cases) or three (in one case) halogen bonds with the donor molecules. The stoichiometry of the cocrystals obtained and the overall topology of the supramolecular architecture depend primarily on the topicity of the halogen bond donor, with the monotopic donor yielding a cocrystal of 1:1 stoichiometry comprising discrete supramolecular complexes, the ditopic donors cocrystals of 1:2 stoichiometry comprising chains, and the tritopic donor a cocrystal of 1:2 stoichiometry comprising hydrogen- and halogen-bonded layers. The results indicate that the pyridone homosynthon is a robust and reliable supramolecular synthon that is conserved in halogen-bonded cocrystals of pyridone.

Isostructural Halogen Exchange and Halogen Bonds: The Case of N-(4-Halogenobenzyl)-3-halogenopyridinium Halogenides

Six N-(4-halogenobenzyl)-3-halogenopyridinium cations were prepared by reacting meta-halogenopyridines (Cl, Br, and I) with (4-halogenobenzyl) bromides (Br and I) and were isolated as bromide salts, which were further used to obtain iodides and chlorides. Sixteen compounds (out of 18 possible cation/anion combinations) were obtained; two crystallized as hydrates and 14 as solvent free salts, 11 of which belonged to one isostructural series and 3 to another. All crystal structures comprise halogen-bonded chains, with the anion as an acceptor of two halogen bonds, with the pyridine and the benzyl halogen substituents of two neighboring cations. The halogen bonds with the pyridine halogen show a linear correlation between the relative halogen bond length and angle, which primarily depend on the donor halogen. The parameters of the other halogen bonds vary with all three halogens, indicating that the former halogen bond is the dominant interaction. This is also in accord with the calculated electrostatic potential in the σ-holes of the halogens and the thermal properties of the solids. The second isostructural group comprises combinations of the best halogen bond donors and acceptors, and features a more favorable halogen bond geometry of the dominant halogen bond, reaffirming its significance as the main factor in determining the structure.

Crystal structure prediction of N-halide phthalimide compounds: Halogen bond synthon as a touchstone

We address crystal structure prediction problem by combining evolutionary algorithm USPEX (used to predict sets of low-energy crystal structures) and synthon approach (extracting preferable supramolecular synthons from Cambridge Structural Database,...

Structural systematics in the isomorphous binary co-crystal solvates comprising 2,2'-dithiodibenzoic acid, 4-halobenzoic acid and dimethylformamide (1:1:1), for halide = chloride, bromide and iodide

The 1:1:1 binary co-crystal solvates formulated as 2,2'-dithiodibenzoic acid (DTBA), 4-halobenzoic acid (4-XBA) and dimethylformamide (DMF) for X = Cl (1), Br (2) and I (3) are isomorphous and the...

The extensive solid-form landscape of sulfathiazole: hydrogen-bond topology and node shape

Patterns of hydrogen bonds are described in a set of 101 crystal structures containing sulfathiazole. Topological analysis of the hydrogen-bond nets is augmented by comparison of the shapes of the nodes extracted from each net.

Construction and structural transformation of two coordination sphere supramolecular isomers based on Co(ii) and 4-(2-pyridyl)-NH-1,2,3-triazole via one-pot synthesis

Two coordination sphere supramolecular isomers based on Co(ii) have been obtained via one-pot synthesis. The structural transformation process has been investigated with the help of mass spectroscopy and theoretical calculations.

Synthesis, crystallization and Hirshfeld surface analysis of transition metal carboxylate pentapyridines

Single X-ray diffraction studies and Hirshfeld surface analysis of three transition metal coordination complexes of Py5Me2COOH reveals the ligand's diverse coordination utility and the structure directing effect of the carboxylate moiety.

Control of supramolecular chirality in co-crystals of achiral molecules via stacking interactions and hydrogen bonding

An approach is proposed to obtain non-centrosymmetric crystal structures using co crystallization of specific achiral molecules. The co-formers, donors and acceptors of electron density, are selected in such a way...

Lead(ii) supramolecular structures formed through a cooperative influence of the hydrazinecarbothioamide derived and ancillary ligands

We report on tetrel bonding and other noncovalent interactions in the lead(ii)-derived complexes with the hydrazinecarbothioamide derived and ancillary ligands, which predominantly drive the formation of extended architectures.

On the energetic stability of halogen bonds involving metals: implications in crystal engineering

This work reports a combined computational and experimental analysis of the ability of square planar d8 transition metal complexes to establish unconventional halogen bonding interactions with chloro-, bromo- and iodopentafluorobenzene...

Construction and application of the qualitative and quantitative analysis system of three boscalid polymorphs based on solid-state analytical methods and chemometric tools

In view of the important influence of solid form on the production and use of agrochemical, it is crucial to develop the accurate and useful qualitative and quantitative analysis system...

Exploring the molecular landscape of multicomponent crystals formed by naproxen drug and acridines

Three cocrystals were obtained by naproxen and acridines, optimizing the yield to more than 99% with LAG. The two structures by solution show a host-guest structure, while that by LAG a layered one, with no interconversion between parent structures.

Co-crystallization studies of the syn- and anti-atropisomers of triphenyl-based perfluorinated halogen bond donors with halides

Highly fluorinated halogen bond donors (based on meta- or para-terphenyl backbones) with two iodine substituents were co-crystallized with halides. Significant differences in the interaction motifs of the syn- and anti-atropisomers were found.

Crystal engineering of a co-crystal of antipyrine and 2-chlorobenzoic acid: relative energetic contributions based on multipolar refinement

The growth and stability of a new 1 : 1 antipyrene–dichlorobenzoic acid cocrystal system has been analyzed in terms of electron density analysis and electrostatic interaction energy contributions.

Effect of chalcogen bond on the packing and coordination geometry in hybrid organic-inorganic Cu(II) networks

The effect of chalcogen bond interaction led to interesting crystal packing and coordination geometry of Copper (II) in novel organic-inorganic hybrids. The reactions of organic bridging ligands, 1,2,5-benzothiadiazole (btd) and...