The Third Hydrogenase: A Ferracyclic Carbamoyl with Close Structural Analogy to the Active Site of Hmd

Synthesis, structural characterization, and some properties of 2-acylmethyl-6-ester group-difunctionalized pyridine-containing iron complexes related to the active site of [Fe]-hydrogenase

The first four acylmethyl/ester group-disubstituted pyridine-containing models for [Fe]-hydrogenase have been synthesized and crystallographically characterized.

Kinetic modeling of hydrogen conversion at [Fe] hydrogenase active-site models

By means of density functional theory, we investigate the catalytic cycle of active-site model complexes of [Fe] hydrogenase and study how ligand substitutions in the first coordination sphere of the reactive Fe center affect the free-energy surface of the whole reaction pathway. Interestingly, dispersion interactions between the active site and the hydride acceptor MPT render the hydride transfer step less endergonic and lower its barrier. Substitution of CO by CN(-), which resembles [FeFe] hydrogenase-like coordination, inverts the elementary steps H(-) transfer and H2 cleavage. A simplified kinetic model reveals the specifics of the interplay between active-site composition and catalysis. Apparently, the catalytic efficiency of [Fe] hydrogenase can be attributed to a flat energy profile throughout the catalytic cycle. Intermediates that are too stable, as they occur, e.g., when one CO ligand is substituted by CN(-), significantly slow down the turnover rate of the enzyme. The catalytic activity of the wild-type form of the active-site model could, however, be enhanced by a PH3 ligand substitution of the CO ligand.

Simple photosystem II water oxidation centre analogues in visible light oxygen and H+ generation

Calcium manganese oxide nanoparticles for application in water oxidation are synthesized by combination with a carboxylated biopolymer stabilizing agent to form very simple but effective analogues of the photosynthetic PSII oxygen evolving complex. The relative efficiency of these materials for production of O(2) and protons under visible light-promoted reactions is evaluated and prolonged reaction lifetimes are observed.

The reactions of pyridinyl thioesters with triiron dodecacarbonyl: their novel diiron carbonyl complexes and mechanistic investigations

Reaction of Fe(3)(CO)(12) with pyridinyl thioester ligand PyCH(2)SCOCH(3) (L(1), Py = pyridin-2-yl) produced complex, [Fe(2)(κ-COCH(3))(μ-SCH(2)Py)(CO)(5)] (1) (PyCH(2)S = pyridin-2-ylmethanethiolate). When complex 1 reacted with PPh(3), a monosubstituted complex, [Fe(2)(κ-COCH(3))(μ-SCH(2)Py)(CO)(4)PPh(3)] (2), was derived. Reaction of the same precursor with analogous thioester ligand PyCH(2)SCOPy (L(2)) generated three novel diiron complexes, [Fe(2)(κ-Py)(μ-SCH(2)Py)(CO)(5)] (3), [Fe(2)(κ-Py)'(μ-SCH(2)Py)(CO)(5)] (4), and [Fe(2)(κ-Py)(μ-SCH(2)Py)(CO)(6)] (5). Complexes 3 and 4 are structural isomers. Complex 5 could be converted into complex 4 but the conversion from complex 5 to the isomer 3 was not observed. All the five complexes were fully characterised using FTIR, NMR, and other techniques. Their structures were determined using X-ray single crystal diffraction analysis. The oxidative formation of complexes 1, 3, 4, and 5 involved C-S and/or C-C bonds cleavages. To probe possible mechanisms for these cleavages, DFT calculations were performed. From the calculations, viable reaction pathways leading to the formation of all the isolated products were delineated. The results of the theoretic calculations also allowed rationalisation of the experimental observations.

Active-site models for the nickel-iron hydrogenases: effects of ligands on reactivity and catalytic properties

Described are new derivatives of the type [HNiFe(SR)(2)(diphosphine)(CO)(3)](+), which feature a Ni(diphosphine) group linked to a Fe(CO)(3) group by two bridging thiolate ligands. Previous work had described [HNiFe(pdt)(dppe)(CO)(3)](+) ([1H](+)) and its activity as a catalyst for the reduction of protons (J. Am. Chem. Soc. 2010, 132, 14877). Work described in this paper focuses on the effects on properties of NiFe model complexes of the diphosphine attached to nickel as well as the dithiolate bridge, 1,3-propanedithiolate (pdt) vs 1,2-ethanedithiolate (edt). A new synthetic route to these Ni-Fe dithiolates is described, involving reaction of Ni(SR)(2)(diphosphine) with FeI(2)(CO)(4) followed by in situ reduction with cobaltocene. Evidence is presented that this route proceeds via a metastable μ-iodo derivative. Attempted isolation of such species led to the crystallization of NiFe(Me(2)pdt)(dppe)I(2), which features tetrahedral Fe(II) and square planar Ni(II) centers (H(2)Me(2)pdt = 2,2-dimethylpropanedithiol). The new tricarbonyls prepared in this work are NiFe(pdt)(dcpe)(CO)(3) (2, dcpe = 1,2-bis(dicyclohexylphosphino)ethane), NiFe(edt)(dppe)(CO)(3) (3), and NiFe(edt)(dcpe)(CO)(3) (4). Attempted preparation of a phenylthiolate-bridged complex via the FeI(2)(CO)(4) + Ni(SPh)(2)(dppe) route gave the tetrametallic species [(CO)(2)Fe(SPh)(2)Ni(CO)](2)(μ-dppe)(2). Crystallographic analysis of the edt-dcpe compund [2H]BF(4) and the edt-dppe compound [3H]BF(4) verified their close resemblance. Each features pseudo-octahedral Fe and square pyramidal Ni centers. Starting from [3H]BF(4) we prepared the PPh(3) derivative [HNiFe(edt)(dppe)(PPh(3))(CO)(2)]BF(4) ([5H]BF(4)), which was obtained as a ∼2:1 mixture of unsymmetrical and symmetrical isomers. Acid-base measurements indicate that changing from Ni(dppe) (dppe = Ph(2)PCH(2)CH(2)PPh(2)) to Ni(dcpe) decreases the acidity of the cationic hydride complexes by 2.5 pK(a)(PhCN) units, from ∼11 to ∼13.5 (previous work showed that substitution at Fe leads to more dramatic effects). The redox potentials are more strongly affected by the change from dppe to dcpe, for example the [2](0/+) couple occurs at E(1/2) = -820 for [2](0/+) vs -574 mV (vs Fc(+/0)) for [1](0/+). Changes in the dithiolate do not affect the acidity or the reduction potentials of the hydrides. The acid-independent rate of reduction of CH(2)ClCO(2)H by [2H](+) is about 50 s(-1) (25 °C), twice that of [1H](+). The edt-dppe complex [2H](+) proved to be the most active catalyst, with an acid-independent rate of 300 s(-1).

Evolution in the understanding of [Fe]-hydrogenase

Hydrogenases catalyse redox reactions with molecular hydrogen, either as substrate or product. The enzymes harness hydrogen as a reductant using metals that are abundant and economical, namely, nickel and iron, and should provide new pointers for the economic use of hydrogen in manmade devices. The most recently discovered and perhaps the most enigmatic of the hydrogenases is the [Fe]-hydrogenase, used by certain microorganisms in the pathway that reduces carbon dioxide to methane. Since its discovery some twenty years ago, [Fe]-hydrogenase has consistently provided structural and mechanistic surprises, often requiring complete re-evaluation of its mechanism of action. This tutorial review combines recent advances in X-ray crystallography and other analytical techniques, as well as in computational studies and in chemical synthesis to provide a platform for understanding this remarkable enzyme type.

Iron acyl thiolato carbonyls: structural models for the active site of the [Fe]-hydrogenase (Hmd)

Phosphine-modified thioester derivatives are shown to serve as efficient precursors to phosphine-stabilized ferrous acyl thiolato carbonyls, which replicate key structural features of the active site of the hydrogenase Hmd. The reaction of Ph(2)PC(6)H(4)C(O)SPh and sources of Fe(0) generates both Fe(SPh)(Ph(2)PC(6)H(4)CO)(CO)(3) (1) and the diferrous diacyl Fe(2)(SPh)(2)(CO)(3)(Ph(2)PC(6)H(4)CO)(2), which carbonylates to give 1. For the extremely bulky arylthioester Ph(2)PC(6)H(4)C(O)SC(6)H(3)-2,6-(2,4,6-trimethylphenyl)(2), oxidative addition is arrested and the Fe(0) adduct of the phosphine is obtained. Complex 1 reacts with cyanide to give Et(4)N[Fe(SPh)(Ph(2)PC(6)H(4)CO)(CN)(CO)(2)] (Et(4)N[2]). (13)C and (31)P NMR spectra indicate that substitution is stereospecific and cis to P. The IR spectrum of [2](-) in ν(CN) and ν(CO) regions very closely matches that for Hmd(CN). XANES and EXAFS measurements also indicate close structural and electronic similarity of Et(4)N[2] to the active site of wild-type Hmd. Complex 1 also stereospecifically forms a derivative with TsCH(2)NC, but the adduct is more labile than Et(4)N[2]. Tricarbonyl 1 was found to reversibly protonate to give a thermally labile derivative, IR measurements of which indicate that the acyl and thiolate ligands are probably not protonated in Hmd.