Active facets on titanium(III)-doped TiO2: an effective strategy to improve the visible-light photocatalytic activity

Mixed Titanium Oxide Strategy for Enhanced Photocatalytic Hydrogen Evolution

Titanium dioxide is a promising photocatalyst material for water splitting, but is limited by its low utilization of solar energy and rapid recombination of electron-hole pairs. Herein, a mixed titanium oxide strategy, utilizing TiO₂/Ti₂O₃ heterostructures consisting of in situ grown TiO₂ nanotubes with mixed anatase and rutile phases on bulk Ti₂O₃ materials, is demonstrated for efficient and recyclable hydrogen evolution from photocatalytic water splitting. Taking advantage of the formed heterostructures and the created porous structures, the photogenerated electrons from the conduction band of anatase TiO₂ can be first delivered to rutile TiO₂ and then transferred to Ti₂O₃. Meanwhile, the presence of Ti₂O₃ in TiO₂/Ti₂O₃ heterostructures can substantially promote the charge mobility and suppress the recombination of photogenerated electron-hole pairs. Hence, with a tuned band gap structure that enables rapid electron-hole separation, increased charge carrier density, and enhanced light absorption, the TiO₂/Ti₂O₃ heterostructures provide an enhanced photocatalytic hydrogen evolution rate as high as 1440 μmol g^-1 h^-1 under full-sunlight irradiation and without any other cocatalyst. This mixed titanium oxide strategy may open up new avenues for designing and constructing highly efficient TiO₂-based photocatalytic materials for various applications.

Structure-Activity Relationship of Defective Metal-Based Photocatalysts for Water Splitting: Experimental and Theoretical Perspectives

Photocatalytic water splitting is promising for hydrogen energy production using solar energy and developing highly efficient photocatalysts is challenging. Defect engineering is proved to be a very useful strategy to promote the photocatalytic performance of metal-based photocatalysts, however, the vital role of defects is still ambiguous. This work comprehensively reviews point defective metal-based photocatalysts for water splitting, focusing on understanding the defects' disorder effect on optical adsorption, charge separation and migration, and surface reaction. The controllable synthesis and tuning strategies of defective structure to improve the photocatalytic performance are summarized, then the characterization techniques and density functional theory calculations are discussed to unveil the defect structure, and analyze the defects induced electronic structure change of catalysts and its ultimate effect on the photocatalytic activity at the molecular level. Finally, the challenge in developing more efficient defective metal-based photocatalysts is outlined. This work may help further the understanding of the fundamental role of defect structure in the photocatalytic reaction process and guide the rational design and fabrication of highly efficient and low-cost photocatalysts.

Strategies to improve the photocatalytic activity of TiO2: 3D nanostructuring and heterostructuring with graphitic carbon nanomaterials

TiO2-based photocatalysis has been considered to be one of the most promising avenues for environmental remediation including water purification. However, several technical issues such as the limited surface area of bulk TiO2, the large band gap of TiO2, and rapid charge recombination still limit the practical application of TiO2 photocatalysts. Therefore, here we focus on two structural design strategies: (i) monolithic three-dimensional (3D) nanostructuring, and (ii) heterostructuring with graphitic carbon nanomaterials. A monolithic 3D nanostructure enables maximal surface area in a given volume and efficient reuse of the photocatalyst without recollection. Heterostructuring with carbon nanomaterials helps achieve maximal utilization of the solar spectrum and charge separation and provides efficient TiO2 photocatalysts. In this review, recent progress on TiO2 photocatalysts toward the abovementioned strategies will be summarized. Further discussion and direction will provide insights into the rational design of highly efficient TiO2 photocatalysts, and help develop advanced photocatalyst models.

Oxygen-Deficient Dumbbell-Shaped Anatase TiO2-x Mesocrystals with Nearly 100 % Exposed {101} Facets: Synthesis, Growth Mechanism, and Photocatalytic Performance

The development of hierarchical TiO₂ superstructures with new morphologies and intriguing photoelectric properties for utilizing solar energy is known to be an effective approach to alleviate the serious problems of environmental pollution. Herein, unique oxygen-deficient dumbbell-shaped anatase TiO_2-x mesocrystals (DTMCs) enclosed by nearly 100 % {101} facets were readily synthesized by mesoscale transformation in TiCl₃ /acetic acid (HAc) mixed solution, followed by calcination under vacuum. These mesocrystals exhibited much higher photoreactivity toward removing the model pollutants methyl orange and Cr^VI than truncated tetragonal bipyramidal anatase nanocrystals (TNCs), anatase mesocrystals built from truncated tetragonal bipyramidal anatase nanocrystals (TTMCs), and anatase mesocrystals constructed by anatase nanocrystals with nearly 100 % exposed {101} facets (TMCs), revealing that both the oxidation and reduction abilities of anatase TiO₂ were simultaneously enhanced upon fabricating an oxygen-deficient mesocrystalline architecture with about 100 % exposed {101} facets. Further characterization illustrated that such an enhancement of photoreactivity was mainly due to the strengthened light absorption, boosted charge carrier separation, and nearly 100 % exposed {101} facets of the oxygen-deficient dumbbell-shaped anatase mesocrystals. This work will be useful for guiding the synthesis of oxygen-deficient ordered superstructures of metal oxides with desired morphologies and exposed facets for promising applications in environmental remediation.

Evaluation of Solar-Driven Photocatalytic Activity of Thermal Treated TiO₂ under Various Atmospheres

In this report, the photocatalytic activity of P25 has been explored and the influence of thermal treatment under various atmospheres (air, vacuum and hydrogen) were discussed. The samples’ characteristics were disclosed by means of various instruments including X-ray diffraction (XRD), Electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS) and UV–vis. This study also accentuates various states of the oxygen vacancy density formed inside the samples as well as the colour turning observed in treated P25 under various atmospheres. Produced coloured TiO₂ samples were then exploited for their photocatalytic capability concerning photodegradation of methylene blue (MB) using air mass (AM) 1.5 G solar light irradiation. Our findings revealed that exceptional photocatalytic activity of P25 is related to the thermal treatment. Neither oxygen vacancy formation nor photocatalytic activity enhancement was observed in the air-treated sample. H₂-treated samples have shown better photoactivity which even could be further improved by optimizing treatment conditions to achieve the advantages of the positive role of oxygen vacancy (O-vacancy at higher concentration than optimum acts as electron trapping sites). The chemical structure and stability of the samples were also studied. There was no sign of deteriorating of O₂-vacancies inside the samples after 6 months. High stability of thermal treated samples in terms of both long and short-term time intervals is another significant feature of the produced photocatalyst.

Pt/POMs/TiO2 composite nanofibers with an enhanced visible-light photocatalytic performance for environmental remediation

Pt/PMo₁₂/TiO₂ composite nanofibers have been prepared and exhibit a highly efficient visible-light photocatalytic performance for removing methyl orange, tetracycline, Bisphenol A and Cr(vi).

Recent advances in modified TiO2 for photo-induced organic synthesis

The recent advancements of modified TiO₂ materials as photocatalysts for organic synthesis are summarized.

Surface Engineering of Nanomaterials for Photo-Electrochemical Water Splitting

Photo-electrochemical water splitting represents a green and environmentally friendly method for producing solar hydrogen. Semiconductor nanomaterials with a highly accessible surface area, reduced charge migration distance, and tunable optical and electronic property are regarded as promising electrode materials to carry out this solar-to-hydrogen process. Since most of the photo-electrochemical reactions take place on the electrode surface or near-surface region, rational engineering of the surface structures, physical properties, and chemical nature of photoelectrode materials could fundamentally change their performance. Here, the recent advances in surface engineering methods, including the modification of the nanomaterial surface morphology, crystal facet, defect and doping concentrations, as well as the deposition of a functional overlayer of sensitizers, plasmonic metallic structures, and protective and catalytic materials are highlighted. Each surface engineering method and how it affects the structural features and photo-electrochemical performance of nanomaterials are reviewed and compared. Finally, the current challenges and the opportunities in the field are discussed.

Hybrid VS2 cocatalyst and phosphorus dopant towards both surface and bulk modification of ZnCdS/CdS heterostructures

The bulk phosphorus doping and the surface VS₂ modification over ZnCdS–CdS show synergistic effects for improving its photocatalytic activity.

TiNF and Related Analogues of TiO2 : A Combined Experimental and Theoretical Study

Aliovalent anion substitution in inorganic materials brings about marked changes in properties, as exemplified by N,F-codoped metal oxides. Recently, complete substitution of oxygen in ZnO by N and F was carried out to generate Zn₂ NF. In view of the important properties of TiO₂ , we have attempted to prepare TiNF by employing an entirely new procedure involving the reaction of TiN with TiF₄ . While the reaction at low temperature (450 °C) yields TiNF in the anatase phase, reaction at a higher temperature (600 °C) yields TiNF in the rutile phase. This is interesting since the anatase phase of TiO₂ also transforms to the rutile phase on heating. The lattice parameters of TiNF are close to those of the parent oxide. Partial substitution of oxygen in TiO₂ by N and F reduces the band gap, but complete substitution increases the value comparable to that of the oxide. We have examined properties of N,F-codoped TiO₂ , and more interestingly N,F-codoped Ti₃ O₅ , both with lower band gaps than the parent oxides. A detailed first-principles calculations has been carried out on structural and electronic properties of N,F-TiO₂ and the TiNF phases. This has enabled us to understand the effects of N,F substitution in TiO₂ in terms of the crystal structure, electronic structure and optical properties.

Structural evolution of titanium dioxide during reduction in high-pressure hydrogen

The excellent photocatalytic properties of titanium oxide (TiO₂) under ultraviolet light have long motivated the search for doping strategies capable of extending its photoactivity to the visible part of the spectrum. One approach is high-pressure and high-temperature hydrogenation, which results in reduced 'black TiO₂' nanoparticles with a crystalline core and a disordered shell that absorbs visible light. Here we elucidate the formation mechanism and structural features of black TiO₂ using first-principles-validated reactive force field molecular dynamics simulations of anatase TiO₂ surfaces and nanoparticles at high temperature and under high hydrogen pressures. Simulations reveal that surface oxygen vacancies created upon reaction of H₂ with surface oxygen atoms diffuse towards the bulk material but encounter a high barrier for subsurface migration on {001} facets of the nanoparticles, which initiates surface disordering. Besides confirming that the hydrogenated amorphous shell has a key role in the photoactivity of black TiO₂, our results provide insight into the properties of the disordered surface layers that are observed on regular anatase nanocrystals under photocatalytic water-splitting conditions.

Defective Anatase TiO2-x Mesocrystal Growth In Situ on g-C3 N4 Nanosheets: Construction of 3D/2D Z-Scheme Heterostructures for Highly Efficient Visible-Light Photocatalysis

Environmental remediation by employing visible-light-active semiconductor heterostructures provides effective solutions for handling emerging contaminants by a much greener and lower cost approach compared with other methods. This report demonstrates that the in situ growth of nanosized single-crystal-like defective anatase TiO_2-x mesocrystals (DTMCs) on g-C₃ N₄ nanosheets (NSs) can produce a 3D/2D DTMC/g-C₃ N₄ NS heterostructure with the two components held together by chemical bonds to form tight interfaces. This nanostructured heterostructure displayed remarkably improved photocatalytic activity toward the removal of the model pollutants Methyl Orange (MO) and Cr^VI under visible-light irradiation in comparison with the pristine DTMC and g-C₃ N₄ NS components, which suggests that both the oxidation and reduction abilities of the DTMC/g-C₃ N₄ NSs were simultaneously enhanced after fabrication. On the basis of the results of a systematic characterization, a reasonable mechanism for the photocatalytic activity based on a direct Z-scheme heterojunction is proposed and further verified by the measurement of ^. OH. This novel Z-scheme heterojunction endows the heterostructure with improved photogenerated electron/hole pair separation and a strong redox ability for the efficient degradation of wastewater pollutants. This work will be useful for the design and fabrication of direct Z-scheme heterostructured photocatalysts with novel architectures for applications in energy conversion and environmental remediation.

Betavoltaic Enhancement Using Defect-Engineered TiO2 Nanotube Arrays through Electrochemical Reduction in Organic Electrolytes

Utilizing high-energy beta particles emitted from radioisotopes for long-lifetime betavoltaic cells is a great challenge due to low energy conversion efficiency. Here, we report a betavoltaic cell fabricated using TiO₂ nanotube arrays (TNTAs) electrochemically reduced in ethylene glycol electrolyte (EGECR-TNTAs) for the enhancement of the betavoltaic effect. The electrochemical reduction of TNTAs using high cathodic bias in organic electrolytes is indeed a facile and effective strategy to induce in situ self-doping of oxygen vacancy (OV) and Ti³⁺ defects. The black EGECR-TNTAs are highly stable with a significantly narrower band gap and higher electrical conductivity as well as UV-vis-NIR light absorption. A 20 mCi of ⁶³Ni betavoltaic cell based on the reduced TNTAs exhibits a maximum ECE of 3.79% with open-circuit voltage of 1.04 V, short-circuit current density of 117.5 nA cm^-2, and a maximum power density of 39.2 nW cm^-2. The betavoltaic enhancement can be attributed to the enhanced charge carrier transport and separation as well as multiple exciton generation of electron-hole pairs due the generation of OV and Ti³⁺ interstitial bands below the conductive band of TiO_2.

The Study of Near-Band-Edge Property in Oxygen-Incorporated ZnS for Acting as an Efficient Crystal Photocatalyst

A wide gap semiconductor material has attracted attention as a heterophotocatalyst because of its light harvesting nature to be used in alternative energy production for the next generation. We, herein, grow and synthesize ZnS_(1-x)O _x series compounds using the chemical vapor transport (CVT) method with I₂ serving as the transport agent. Different crystals, such as undoped ZnS and oxygen-doped ZnS_0.94O_0.06 and ZnS_0.88O_0.12, revealed different bright palette emissions that were presented in photoluminescence spectra in our previous report. To study the electron-hole pair interaction of this sample series, the near-band-edge transitions of the sample series were characterized in detail by photoconductivity (PC) experiments. Additional results from surface photovoltage (SPV) spectra also detected the surface and defect-edge transitions from the higher oxygen-doped ZnS crystals. PC measurement results showed a red-shift in the bandgap with increasing incorporation of oxygen on ZnS. Consequently, the samples were subjected to photoirradiation by xenon lamp for the degradation of methylene blue (MNB) by acting as heterophotocatalysts. Undoped ZnS emerged as the best photocatalyst candidate with the fastest rate constant value of 0.0277 min^-1. In cubic {111} ZnS [{111} c-ZnS], the polarized Zn⁺ → S^- ions may play a vital role as a photocatalyst because of their strong electron-hole polarization, which leads to the mechanism for degradation of the MNB solution.

Enhanced Photocatalytic Activity of {110}-Faceted TiO₂ Rutile Nanorods in the Photodegradation of Hazardous Pharmaceuticals

Rutile TiO₂ with highly active facets has attracted much attention owing to its enhanced activity during the photocatalytic degradation of pollutants such as pharmaceuticals in wastewater. However, it is difficult to obtain by controlling the synthetic conditions. This paper reports a simple hydrothermal synthesis of rutile TiO₂ nanorods with highly exposed {110} facets. The obtained rutile was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), and Raman spectroscopy. The main contribution to the photocatalytic activity comes from rutile nanorods with highly dominant active {110} facets, which were studied in the photodegradation of reactive cinnamic acid and more recalcitrant ibuprofen. The contribution of active species was also investigated. The present work further confirmed the hydrothermal synthesis route for controlling the preparation of highly crystalline and active rutile nanocrystals.

Noninvasively Modifying Band Structures of Wide-Bandgap Metal Oxides to Boost Photocatalytic Activity

Although doping with appropriate heteroatoms is a powerful way of increasing visible light absorption of wide-bandgap metal oxide photocatalysts, the incorporation of heteroatoms into the photocatalysts usually leads to the increase of deleterious recombination centers of photogenerated charge carriers. Here, a conceptual strategy of increasing visible light absorption without causing additional recombination centers by constructing an ultrathin insulating heterolayer of amorphous boron oxynitride on wide-bandgap photocatalysts is shown. The nature of this strategy is that the active composition nitrogen in the heterolayer can noninvasively modify the electronic structure of metal oxides for visible light absorption through the interface contact between the heterolayer and metal oxides. The photocatalysts developed show significant improvements in photocatalytic activity under both UV-vis and visible light irradiation compared to the doped counterparts by conventional doping process. These results may provide opportunities for flexibly tailoring the electronic structure of metal oxides.

Oxygen vacancies confined in SnO2 nanoparticles for glorious photocatalytic activities from the UV, visible to near-infrared region

For the purpose of effectively utilizing solar energy, tailoring of the energy band configuration represents an effective approach to the exploration and development of full-spectrum-responsive photocatalysts with advanced performance.

One-step synthesis of nonstoichiometric TiO2 nanorod films for enhanced photocatalytic H2 evolution

Nonstoichiometric TiO₂ nanorod films with high stability and excellent H₂ generation activities have been obtained by a facile one-step sputtering method.

Superior solar-to-hydrogen energy conversion efficiency by visible light-driven hydrogen production via highly reduced Ti2+/Ti3+ states in a blue titanium dioxide photocatalyst

A catalytic hydrogen production system was developed with TiO₂ that contains Ti³⁺/Ti²⁺ reduced states which act as both visible and IR light harvesting components as well as the catalytic site.

Visible-Light-Mediated [4+2] Annulation of N-Cyclobutylanilines with Alkynes Catalyzed by Self-Doped Ti3+ @TiO2

We herein report a visible-light-mediated heterogeneous [4+2] annulation of N-cyclobutylanilines with alkynes catalyzed by self-doped Ti3+ @TiO2 . The self-doped Ti3+ @TiO2 is stable under photooxidation conditions, easy to recycle, and can be used multiple times without appreciable loss of activity. Extensive mechanistic studies suggest that the annulation reaction is mediated by singlet oxygen, which is generated through the photosensitization of oxygen in the air by the self-doped Ti3+ @TiO2 . In contrast, the homogeneous variant catalyzed by a far more expensive iridium complex proceeds under an inert atmosphere, which indicates a different mechanism. The substrate scopes of the two processes are comparable.

Dual Functional Ta-Doped Electrospun TiO2 Nanofibers with Enhanced Photocatalysis and SERS Detection for Organic Compounds

There is a growing interest in multifunctional nanomaterials for the detection as well as degradation of organic contaminants in the water. In this work, we report on the development of dual functional TiO₂ nanofibers (TNF) with different tantalum (Ta) doping (1-10 mol %) by a simple electrospinning technique. As-prepared TNF show mesoporous dominant structure, which are favorable for photocatalytic activity due to the presence of catalytic spots. Ta doping decreases the crystalline size within TiO₂ matrix because of the incorporation of Ta⁵⁺ ions and restricts the phase transformation from anatase to rutile. Ta doping slightly enhances the visible light absorption because of the Ti³⁺ defects sites created upon Ta⁵⁺ doping. The effect of Ta doping within TiO₂ matrix was systematically studied for the degradation of methylene blue (MB) dye under ultraviolet (UV) and solar light irradiation. The 5% Ta-doped TNF were found to be optimal and showed 5.1 and 2.2 times higher photocatalytic activity as compared to TNF under UV and solar light irradiation, respectively. The effect of Ta doping for the detection of MB molecules was also studied by surface enhanced Raman scattering (SERS). It was observed that 5% Ta-doped TNF exhibit higher photocatalytic activity and enhanced SERS signals of adsorbed MB molecules as compared to the TNF. The enhanced photocatalytic and SERS activities can be explained as combined effects of enhanced visible light absorption, lower crystalline size, and slightly higher surface area. The observed results show that Ta doping induces new energy levels below the conduction band of TiO₂ because of Ti³⁺ defects, which inhibit the photogenerated charge recombination acting as electron traps and promote charge transfer mechanism acting as an intermediate state for TiO₂ to MB molecule electron transfer, and are mainly responsible for the enhanced photocatalytic and SERS activities, respectively.

Recent Progress in Energy-Driven Water Splitting

Hydrogen is readily obtained from renewable and non-renewable resources via water splitting by using thermal, electrical, photonic and biochemical energy. The major hydrogen production is generated from thermal energy through steam reforming/gasification of fossil fuel. As the commonly used non-renewable resources will be depleted in the long run, there is great demand to utilize renewable energy resources for hydrogen production. Most of the renewable resources may be used to produce electricity for driving water splitting while challenges remain to improve cost-effectiveness. As the most abundant energy resource, the direct conversion of solar energy to hydrogen is considered the most sustainable energy production method without causing pollutions to the environment. In overall, this review briefly summarizes thermolytic, electrolytic, photolytic and biolytic water splitting. It highlights photonic and electrical driven water splitting together with photovoltaic-integrated solar-driven water electrolysis.