Double-Shelled Nanocages with Cobalt Hydroxide Inner Shell and Layered Double Hydroxides Outer Shell as High-Efficiency Polysulfide Mediator for Lithium-Sulfur Batteries

Electrospun Polymer Nanofibers with TiO2@NiCo-LDH as Efficient Polysulfide Barriers for Wide-Temperature-Range Li-S Batteries

Herein, we introduce polymer nanofibers of TiO₂@NiCo-LDH as interlayers into Li-S batteries. From 0 to 60 °C, the interlayers can deliver high sulfur utilization, an outstanding rate capability, and excellent cycling life. High-temperature excitation makes it easier for the valence band electrons of TiO₂ to transition to the conduction band. The electron-hole pairs formed on the surface combine with the ether group of 1,3-dioxolane in the electrolyte, which greatly reduces the decomposition and volatilization rates of the electrolyte, ensuring Li-S batteries with good cycle performance at high temperatures. The capacity can stabilize at 798.6 mAh g^-1 after 100 cycles at 60 °C and 1C, and the battery can provide a capacity higher than 323.2 mAh g^-1 at 0 °C. Simultaneously, the lithium metal symmetrical battery with a functional separator can be continuously cycled for 1800 and 750 h without a short circuit at the current densities of 0.65 and 1.63 mA cm^-2, respectively.

Yolk-Shell Nano ZnO@Co-Doped NiO with Efficient Polarization Adsorption and Catalysis Performance for Superior Lithium-Sulfur Batteries

Achieving strong adsorption and catalytic ability toward polar lithium polysulfide species (LiPSs) of the sulfur host in lithium-sulfur (Li-S) batteries is essential for their electrochemical cyclic stability. Herein, a strategy of "self-termination of ion exchange" is put forward to synthesize the novel yolk-shell sulfur host composed of ZnO nanoparticles confined in Co-doped NiO (CDN) polyhedron (ZCCDN). After sulfur infiltration, the obtained S/ZCCDN cathode achieves excellent performance of 738.56 mAh g^-1 after 500 cycles at 0.5 C with a very low capacity decay rate of only 0.048% per cycle. Even at 1 C, 501.05 mAh g^-1 could be retained after 500 cycles, suggesting a capacity decay ratio of only 0.076% per cycle. The good cycle performance is attributed to the improved LiPSs' conversion kinetics, which originates from ZCCDN's sturdy chemical affinity and strong catalytic ability to polar LiPSs. For the first time, by electron holography, the local interfacial polarization electric field is clarified to be existed in the material which is conducive to the capture of LiPSs and the migration of electrons and Li⁺ from the mesopores. This work provides a rational way for the use of zeolitic imidazolate frameworks (ZIFs) and development of cathode materials for Li-S batteries.

One-pot synthesis of N,S-doped pearl chain tube-loaded Ni3S2 composite materials for high-performance lithium-air batteries

To improve the high reversibility of lithium-air batteries, an air electrode needs to have excellent electrochemical performance and spatial structure. Ni3S2 nanoparticles are loaded onto an N,S-doped pearl chain tube (N,S-PCT) by a method called quasi-chemical vapor deposition (Q-CVD). Additionally, N and S are doped during the synthesis process, thereby forming an ideal pipe rack-like structure. The large amount of space in the tube rack can provide sufficient storage to act as a buffer for the discharge products, and the interconnected tubes can effectively promote the dispersion of O2 and electrolyte. The addition of Ni3S2 nanoparticles effectively reduces the charge transfer resistance, thereby increasing the electron mobility of the cathode. Ni3S2@N,S-PCT cathodes effectively improve the cycling and high-rate performance of lithium-air batteries, demonstrating an ultrahigh discharge capacity of 16 733.7 mA h g-1 at a current density of 400 mA g-1 and an ultrahigh discharge capacity of 5088.1 mA h g-1 at a current density of 1000 mA g-1. When the cut-off capacity is 1000 mA h g-1, the battery with the Ni3S2@N,S-PCT-800 electrode can achieve cycling stability for 148 cycles. This research provides a new solution for the design of lithium-air batteries with high electrocatalytic performance.

Accurately Regulating the Electronic Structure of Nix Sey @NC Core-Shell Nanohybrids through Controllable Selenization of a Ni-MOF for pH-Universal Hydrogen Evolution Reaction

N-doped carbon-encapsulated transition metal selenides (TMSs) have garnered increasing attention as promising electrocatalysts for hydrogen evolution reaction (HER). Accurately regulating the electronic structure of these nanohybrids to reveal the underlying mechanism for enhanced HER performances is still challenging and thus requires deep excavation. Herein, a series of pomegranate-like Ni_x Se_y @NC core-shell nanohybrids (including Ni_0.85 Se @ NC, NiSe₂ @NC, and NiSe@NC) through controllable selenization of a Ni-MOF precursor is reported. The component of the nanohybrids can be fine-tuned by tailoring the selenization temperature and feed ratio, through which the electronic structure can be synchronously regulated. Among these nanohybrids, the Ni_0.85 Se @ NC exhibits the optimum pH-universal HER performance with overpotentials of 131, 135, and 183 mV in 0.5 m H₂ SO₄ , 1.0 m KOH, and 1.0 m PBS, respectively, at 10 mA cm^-2 , which are attributed to the increased partial density of state at the Fermi level and effective van der Waals interactions between Ni_0.85 Se and NC matrix explained by density functional theory calculations.

Destruction of Metal-Organic Frameworks: Positive and Negative Aspects of Stability and Lability

Metal-organic frameworks (MOFs), constructed from organic linkers and inorganic building blocks, are well-known for their high crystallinity, high surface areas, and high component tunability. The stability of MOFs is a key prerequisite for their potential practical applications in areas including storage, separation, catalysis, and biomedicine since it is essential to guarantee the framework integrity during utilization. However, MOFs are prone to destruction under external stimuli, considerably hampering their commercialization. In this Review, we provide an overview of the situations where MOFs undergo destruction due to external stimuli such as chemical, thermal, photolytic, radiolytic, electronic, and mechanical factors and offer guidelines to avoid unwanted degradation happened to the framework. Furthermore, we discuss possible destruction mechanisms and their varying derived products. In particular, we highlight cases that utilize MOF instability to fabricate varying materials including hierarchically porous MOFs, monolayer MOF nanosheets, amorphous MOF liquids and glasses, polymers, metal nanoparticles, metal carbide nanoparticles, and carbon materials. Finally, we provide a perspective on the utilization of MOF destruction to develop advanced materials with a superior hierarchy for various applications.

Enhancing Adsorption and Reaction Kinetics of Polysulfides Using CoP-Coated N-Doped Mesoporous Carbon for High-Energy-Density Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries have shown great potential in the next-generation energy storage devices due to high theoretical energy density and low cost. To obtain high-performance Li-S batteries, it is important to inhibit the polysulfide shuttle effect and improve the reaction kinetics of polysulfides. Herein, CoP nanoparticles coated by metal-organic framework-derived N-doped mesoporous carbon (CoP@N-C) composites are synthesized and applied in both a cathode for a sulfur host and a modified layer on a separator for high-energy-density Li-S batteries since the CoP component has strong chemical anchoring capability toward soluble polysulfides and high electrochemical activity toward polysulfides transformation. Meanwhile, the porous structure of conductive N-doped mesoporous carbon can not only buffer the volume variation of sulfur during the charge/discharge process but also enhance the charge transport rate in the cathode. The constructed batteries have demonstrated a high specific capacity of 1222 mAh g^-1 (8.6 mAh cm^-2) with a high sulfur areal loading of ∼7.0 mg cm^-2 on cathodes, and a mass loading of 0.35 mg cm^-2 for modified layer on separators. Its average capacity decay is only 0.076% per cycle after 100 cycles. This work presents the highly competitive performance of Li-S batteries on the areal capacity and capacity decay.

Okra-Like Fe7 S8 /C@ZnS/N-C@C with Core-Double-Shelled Structures as Robust and High-Rate Sodium Anode

Core-multishelled structures with controlled chemical composition have attracted great interest due to their fascinating electrochemical performance. Herein, a metal-organic framework (MOF)-on-MOF self-templated strategy is used to fabricate okra-like bimetal sulfide (Fe₇ S₈ /C@ZnS/N-C@C) with core-double-shelled structure, in which Fe₇ S₈ /C is distributed in the cores, and ZnS is embedded in one of the layers. The MOF-on-MOF precursor with an MIL-53 core, a ZIF-8 shell, and a resorcinol-formaldehyde (RF) layer (MIL-53@ZIF-8@RF) is prepared through a layer-by-layer assembly method. After calcination with sulfur powder, the resultant structure has a hierarchical carbon matrix, abundant internal interface, and tiered active material distribution. It provides fast sodium-ion reaction kinetics, a superior pseudocapacitance contribution, good resistance of volume changes, and stepwise sodiation/desodiation reaction mechanism. As an anode material for sodium-ion batteries, the electrochemical performance of Fe₇ S₈ /C@ZnS/N-C@C is superior to that of Fe₇ S₈ /C@ZnS/N-C, Fe₇ S₈ /C, or ZnS/N-C. It delivers a high and stable capacity of 364.7 mAh g^-1 at current density of 5.0 A g^-1 with 10 000 cycles, and registers only 0.00135% capacity decay per cycle. This MOF-on-MOF self-templated strategy may provide a method to construct core-multishelled structures with controlled component distributions for the energy conversion and storage.

Effective accommodation and conversion of polysulfides using organic-inorganic hybrid frameworks for long-life lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries are one of the most promising candidates for meeting the emerging market demands for energy storage, and have the advantages including high energy density and low cost. However, the practical application of Li-S batteries is hindered by the lithium polysulfide (LiPS) shuttle, which induces low sulfur utilization and unsatisfactory capacity retention. To address this problem, recent studies have focused on improving the transformation of LiPS into insoluble Li2S2/Li2S through methods beyond physical or chemical adsorption. Nevertheless, the commonly used host materials have limited ability to simultaneously trap and propel redox transfer of LiPS. Herein, the bottom-up construction of new organic-inorganic hybrid frameworks for sulfur cathodes is proposed to fundamentally restrict LiPS dissolution and enhance their electrochemical transformation. The synergistic integration of organic cellulose networks and inorganic ZIF-derivatives caused highly efficient LiPS mediators to suppress the shuttle effect and retain electrode stability. The resulting RCE-Co3O4@G-S cathode materials delivered a stable capacity of 726.5 mA h g-1 at 0.2 C after 350 cycles, with a very low fading rate of 0.026% per cycle and a high coulombic efficiency of 98.9%.

Complete encapsulation of sulfur through interfacial energy control of sulfur solutions for high-performance Li-S batteries

Complete encapsulation of high-content sulfur into porous carbon or carbon composites is crucial for high-performance Li−S cells. However, the low-to-moderate compatibility of sulfur-dissolved solution with carbon causes difficulty in completely loading sulfur into the porous host. We control the interfacial energy of the sulfur solution by adding a solvent with high compatibility with the carbon surface. The use of NMP improves the infiltration of sulfur solution effectively, resulting in complete sulfur encapsulation. We observe that the control of sulfur loading greatly affects Li−S battery performance. We identify significantly superior cell performance in the complete encapsulation. Our method can also be applied to effectively load active materials for next-generation energy storage devices.

Complete encapsulation of high-content sulfur in porous carbon is crucial for high performance Li−S batteries. To this end, unlike conventional approaches to control the pore of carbon hosts, we demonstrate controlling the interfacial energy of the solution in the process of penetrating the sulfur-dissolved solution. We unveil, experimentally and theoretically, that the interfacial energy with the carbon surface of the sulfur solution is the key to driving complete encapsulation of sulfur. In the infiltration of sulfur solutions with N-methyl-2-pyrrolidone, we achieve complete encapsulation of sulfur, even up to 85 wt %. The sulfur fully encapsulated cathode achieves markedly high volumetric capacity and stable cycle operation in its Li−S battery applications. We achieve a volumetric capacity of 855 mAh/cm³ at 0.2C and a capacity reduction of 0.071% per cycle up to 300 cycles at 1C.

When hollow multishelled structures (HoMSs) meet metal-organic frameworks (MOFs)

Hollow multishelled structures (HoMSs) have distinguished advantages, such as a large effective surface area, an optimized mass transport route, and a high loading capacity, but the fabrication of HoMSs has been a big challenge. In 2009, we developed a universal and facile method for HoMS fabrication, i.e., the sequential templating approach (STA). Progress in the synthetic methodology has enabled the study of HoMSs to develop and has made it a research hotspot in materials science. To date, HoMSs have shown their advantages in a wide range of applications, including catalysis, energy conversion and storage, drug delivery, etc. Based on the understanding in this field, we recently revealed the unique temporal-spatial ordering properties of HoMSs. Furthermore, we have been wondering if the structure of a HoMS can be modulated at the molecular level. Encouragingly, metal-organic frameworks (MOFs) are star materials with clearly defined molecular structures. The compositions, geometries, functionalities and topologies of MOFs have been well tuned by rational design. Integrating the unique properties of MOFs and HoMS could realize the systemic design of materials from the molecular to the micro-level, which would provide a series of advantages for various applications, such as developing high performance catalysts for cascade and/or selective catalysis, combining the reaction and separation process for multiple reactions, releasing drugs in a certain environment for smart medicine, and so on. We believe it is time to summarize the recent progress in the integration of MOFs and HoMSs, including HoMSs coated with MOFs, MOF-derived HoMSs, and MOFs with a hollow multishelled structure, and we also put forward our personal outlook in relation to the future opportunities and challenges in this emerging yet promising research field.

Hierarchical Carbon Microtube@Nanotube Core-Shell Structure for High-Performance Oxygen Electrocatalysis and Zn-Air Battery

Zinc-air batteries (ZABs) hold tremendous promise for clean and efficient energy storage with the merits of high theoretical energy density and environmental friendliness. However, the performance of practical ZABs is still unsatisfactory because of the inevitably decreased activity of electrocatalysts when assembly into a thick electrode with high mass loading. Herein, we report a hierarchical electrocatalyst based on carbon microtube@nanotube core-shell nanostructure (CMT@CNT), which demonstrates superior electrocatalytic activity for oxygen reduction reaction and oxygen evolution reaction with a small potential gap of 0.678 V. Remarkably, when being employed as air-cathode in ZAB, the CMT@CNT presents an excellent performance with a high power density (160.6 mW cm-2), specific capacity (781.7 mAhg Zn -1 ) as well as long cycle stability (117 h, 351 cycles). Moreover, the ZAB performance of CMT@CNT is maintained well even under high mass loading (3 mg cm-2, three times as much as traditional usage), which could afford high power density and energy density for advanced electronic equipment. We believe that this work is promising for the rational design of hierarchical structured electrocatalysts for advanced metal-air batteries.

Single-Atom Catalytic Materials for Advanced Battery Systems

Advanced battery systems with high energy density have attracted enormous research enthusiasm with potential for portable electronics, electrical vehicles, and grid-scale systems. To enhance the performance of conversion-type batteries, various catalytic materials are developed, including metals and transition-metal dichalcogenides (TMDs). Metals are highly conductive with catalytic effects, but bulk structures with low surface area result in low atom utilization, and high chemical reactivity induces unfavorable dendrite effects. TMDs present chemical adsorption with active species and catalytic activity promotes conversion processes, suppressing shuttle effect and improving energy density. But they suffer from inferior conductivity compared with metal, and limited sites mainly concentrate on edges and defects. Single-atom materials with atomic sizes, good conductivity, and individual sites are promising candidates for advanced batteries because of a large atom utilization, unsaturated coordination, and unique electronic structure. Single-atom sites with high activity chemically trap intermediates to suppress shuttle effects and facilitate electron transfer and redox reactions for achieving high capacity, rate capability, and conversion efficiency. Herein, single-atom catalytic electrodes design for advanced battery systems is addressed. Major challenges and promising strategies concerning electrochemical reactions, theoretical model, and in situ characterization are discussed to shed light on future research of single-atom material-based energy systems.

Chemical reactivity under nanoconfinement

Confining molecules can fundamentally change their chemical and physical properties. Confinement effects are considered instrumental at various stages of the origins of life, and life continues to rely on layers of compartmentalization to maintain an out-of-equilibrium state and efficiently synthesize complex biomolecules under mild conditions. As interest in synthetic confined systems grows, we are realizing that the principles governing reactivity under confinement are the same in abiological systems as they are in nature. In this Review, we categorize the ways in which nanoconfinement effects impact chemical reactivity in synthetic systems. Under nanoconfinement, chemical properties can be modulated to increase reaction rates, enhance selectivity and stabilize reactive species. Confinement effects also lead to changes in physical properties. The fluorescence of light emitters, the colours of dyes and electronic communication between electroactive species can all be tuned under confinement. Within each of these categories, we elucidate design principles and strategies that are widely applicable across a range of confined systems, specifically highlighting examples of different nanocompartments that influence reactivity in similar ways.

2 D Materials for Inhibiting the Shuttle Effect in Advanced Lithium-Sulfur Batteries

A lithium-sulfur battery is a new energy storage device with low cost, high energy storage density, and environmental protection. It is an important tool for future battery systems. However, owing to the shuttle of polysulfides, insulation performance of sulfur, and volume change, capacity decay and cycle instability result, which limits the future application of lithium-sulfur batteries. 2 D materials, such as graphene, carbide, nitride, sulfide, oxide, and their aggregates, provide high surface area to improve sulfur utilization and cycle performance. In this Minireview, various 2 D materials are summarized that use physical confinement and chemical interactions to inhibit the shuttle of polysulfides. We outline the controlled spacing of 2 D materials, abundant active sites, and large transverse size separators and interlayers. The effects on the interlayer and separator based on 2 D materials at the lithium anode prevent polysulfide dissolution are also reviewed. Finally, the challenges and prospects of 2 D materials for lithium-sulfur batteries are discussed.

Flexible Active-Site Engineering of Monometallic Co-Layered Double Hydroxides for Achieving High-Performance Bifunctional Electrocatalyst toward Oxygen Evolution and H2O2 Reduction

It is highly desirable but challenging to develop a facile and scalable strategy to synthesize efficient bifunctional electrocatalysts for oxygen evolution and H₂O₂ reduction by engineering the active site of monometallic-layered double hydroxides (LDHs). Herein, we developed a convenient, efficient, and scalable method for the construction of monometallic Co-LDHs with tunable Coⁿ⁺ (n = 2, 3) concentration by a one-pot solvothermal reaction in a short time (e.g., 2 and 4 h) using only cobalt nitrate and hexamine as raw materials. The catalytic performance of Co-LDHs was mainly determined by the Coⁿ⁺ (n = 2, 3) concentration, which could be simply regulated by tuning the solvothermal time. Combining the joint merits of three-dimensional flowerlike architecture (abundant accessible active sites and a fast electron/mass transport), Co-LDHs-4 with abundant Co³⁺ species exhibited an excellent electrocatalytic activity for oxygen evolution reaction in terms of a low overpotential at 10 mA cm^-2 (η₁₀ = 241 mV) and long-term durability for 70 h at 100 mA cm^-2, better than the state-of-the-art IrO₂ and most of the reported analogues. Besides, Co-LDHs-2 enriched in Co²⁺ displayed a superior electrochemical activity for H₂O₂ detection with a broad linear range (0.002-20 mM), a low detection limit (0.002 mM), and a high response sensitivity (272.02 μA mM^-1 cm^-2). Therefore, this work opens a new horizon for the rational development of a highly active electrocatalyst with tunable concentrations of active components.

Defect-Rich Multishelled Fe-Doped Co3O4 Hollow Microspheres with Multiple Spatial Confinements to Facilitate Catalytic Conversion of Polysulfides for High-Performance Li-S Batteries

Over the past decade, lithium-sulfur (Li-S) batteries have been thought of as promising alternatives for the new generation of battery systems. Although the Li-S batteries possess high-theoretical energy density (2600 Wh kg^-1) and capacity (1675 mAh g^-1), the problems of poor electron and ion conduction, volumetric expansion, and sulfur immobilization greatly impede the wide applicability of Li-S batteries. Herein, a defect-rich multishelled Co₃O₄ microsphere structure doped with Fe was synthesized via a one-step hydrothermal method and subsequent thermal treatment. The unique multishelled structure provides multiple spatial confinements for lithium polysulfides trapping and buffering the volume variation during cycling. Moreover, the rich oxygen defect designed by controlled Fe doping can provide numerous catalytic sites for polysulfide redox reactions. Attributed to the synergistic effect of structural design and oxygen-defect fabrication, the sulfur composite electrode delivers a notable cycle performance, presenting a much lower capacity fading of 0.017% per cycle over 1000 cycles at 1 C and an excellent rate capability of 571.3 mAh g^-1 at 5 C. This work proposes a potential approach for designing a transition metal oxide-based multishelled hollow structure combined with oxygen defect, which also offers a new perspective on high-performance Li-S batteries.

A general strategy based on the self-evolution of building blocks for the construction of one-dimensional hierarchically super-structured TiO2 fibres

We provide a general strategy based on the self-evolution of building blocks to fabricate one-dimensional hierarchically superstructured metal-doped titanate and TiO₂ materials with coated-nanosheet and interconnected meso-/macropores.

Low-Bandgap Se-Deficient Antimony Selenide as a Multifunctional Polysulfide Barrier toward High-Performance Lithium-Sulfur Batteries

The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPSs) represent the main obstructions to the practical application of lithium-sulfur (Li-S) batteries. Herein, an anion-deficient design of antimony selenide (Sb₂ Se_{3- x} ) is developed to establish a multifunctional LiPS barrier toward the inhibition of polysulfide shuttling and enhancement of battery performance. The defect chemistry in the as-developed Sb₂ Se_{3- x} promotes the intrinsic conductivity, strengthens the chemical affinity to LiPSs, and catalyzes the sulfur electrochemical conversion, which are verified by a series of computational and experimental results. Attributed to these unique superiorities, the obtained LiPS barrier efficiently promotes and stabilizes the sulfur electrochemistry, thus enabling excellent Li-S battery performance, e.g., outstanding cyclability over 500 cycles at 1.0 C with a minimum capacity fading rate of 0.027% per cycle, a superb rate capability up to 8.0 C, and a high areal capacity of 7.46 mAh cm^-2 under raised sulfur loading. This work offers a defect engineering strategy toward fast and durable sulfur electrochemistry, holding great promise in developing practically viable Li-S batteries as well as enlightening the material design of related energy storage and conversion systems.

Enhanced Chemisorption and Catalytic Effects toward Polysulfides by Modulating Hollow Nanoarchitectures for Long-Life Lithium-Sulfur Batteries

Hollow nanostructures with intricate interior and catalytic effects hold great promise for the construction of advanced lithium-sulfur batteries. Herein, a double-shelled hollow polyhedron with inlaid cobalt nanoparticles encapsulated by nitrogen-doped carbon (Co/NC) nanodots (Co-NC@Co₉ S₈ /NPC) is reported, which is acquired by using imidazolium-based ionic-polymer-encapsulated zeolitic imidazolate framework-67 as a core-shelled precursor. The Co/NC nanodots promote redox kinetics and chemical adsorbability toward polysulfides, while the interconnected double shells serve as a nanoscale electrochemical reaction chamber, which effectively suppresses the polysulfide shuttling and accelerates ion/electron transport. Benefiting from structural engineering and reaction kinetics modulation, the Co-NC@Co₉ S₈ /NPC-S electrode exhibits high cycling stability with a low capacity decay of 0.011% per cycle within 2000 cycles at 2 C. The electrode still shows high rate performance and cyclability over 500 cycles even in the case of high sulfur loading of 4.5 mg cm^-2 and 75 wt% sulfur content. This work provides one type of new hollow nanoarchitecture for the development of advanced Li-S batteries and other energy storage systems.

Bimetallic FeNi-MIL-88-derived NiFe2O4@Ni–Mn LDH composite electrode material for a high performance asymmetric supercapacitor

A novel NiFe₂O₄@Ni–Mn LDH/NF composite was synthesized by deriving bimetallic FeNi-MIL-88, and has potential application as a high-performance supercapacitor.

Unique Flexible NiFe2O4@S/rGO-CNT Electrode via the Synergistic Adsorption/Electrocatalysis Effect toward High-Performance Lithium-Sulfur Batteries

A unique flexible NiFe₂O₄ hollow sphere@S/rGO-CNT (NiFe₂O₄@S/C) cathode was rationally designed and synthesized to tackle the issues of lithium-sulfur batteries. In this strategy, the introduced rGO and CNTs offer a flexible and conductive skeleton to facilitate the transport of electrons and/or ions and a physical barrier to confine polysulfides. Furthermore, as an efficient sulfur host, NiFe₂O₄ hollow spheres can further absorb the soluble polysulfides by strong chemical interaction due to their intrinsic polarity and also serve as a catalyst to promote the redox kinetics of polysulfide conversion. Benefiting from the synergism of the physical confinement, polar chemical adsorption, and catalytic conversion, the as-prepared flexible NiFe₂O₄@S/C electrode delivers a high initial capacity of 1193 mAh g^-1 at 100 mA g^-1 and excellent long-term cycling stability up to 500 cycles with a low decay rate of 0.059% per cycle at 500 mA g^-1.

Secondary-Component Incorporated Hollow MOFs and Derivatives for Catalytic and Energy-Related Applications

Their highly functional nature has endowed metal-organic frameworks (MOFs) with diverse applications. On this basis, a higher demand has been proposed for the preparation of novel-structured MOFs. Hollow MOFs have been intensively studied and exhibited versatile properties, and among the various methods, secondary-component incorporation has been proved promising in the design and preparation of complex structures with requisite properties. Herein, the synthesis and applications of secondary component incorporated MOFs and their derivatives are systematically reviewed. Two main methodologies, preincorporation and postmodification, are discussed in detail, and the role of the secondary component is demonstrated. Based on these introductions, the applications of those materials, including chemical catalysis, electrocatalysis, and energy storage applications, are summarized. Finally, a personal outlook for the future opportunities and challenges in this field is given.

Hierarchically Porous W-Doped CoP Nanoflake Arrays as Highly Efficient and Stable Electrocatalyst for pH-Universal Hydrogen Evolution

It is still challenging to develop high-efficiency and low-cost non-noble metal-based electrocatalysts for hydrogen evolution reaction (HER) in pH-universal electrolytes. Herein, hierarchically porous W-doped CoP nanoflake arrays on carbon cloth (W-CoP NAs/CC) are synthesized via facile liquid-phase reactions and a subsequent phosphorization process. The W-CoP NAs/CC hybrid can be directly employed as a binder-free electrocatalyst and delivers superior HER performance in pH-universal electrolytes. Especially, it delivers very low overpotentials of 89, 94, and 102 mV to reach a current density of 10 mA cm^-2 in acidic, alkaline, and neutral electrolytes, respectively. Furthermore, it shows a nearly 100% Faradaic efficiency as well as superior long-term stability with no decreasing up to 36 h in pH-universal electrolytes. The outstanding electrocatalytic performance of W-CoP NAs/CC can be mainly attributed to the porous W-doped nanoflake arrays, which not only afford rich exposed active sites, but also accelerate the access of electrolytes and the diffusion of H₂ bubbles, thus efficiently promoting the HER performance. This work provides a new horizon to rationally design and synthesize highly effective and stable non-noble metal phosphide-based pH-universal electrocatalysts for HER.

Hollow Metal-Organic-Framework Micro/Nanostructures and their Derivatives: Emerging Multifunctional Materials

Hollow metal-organic framework (MOF) micro/nanostructures and their derivatives are attracting a great amount of research interest in recent years because their hierarchical porous structures not only provide abundant, easily accessed metal sites but also endow 3D channels for rapid mass transport. As a result, they demonstrate significant advantages in many applications including catalysis, gas sensors, batteries, supercapacitors, and so on. Nevertheless, studies on hollow MOFs and their derivatives are still at the beginning of this field, and the relationship between their structures and application performances is not yet reviewed comprehensively. Herein, the synthetic strategies and practical applications of hollow micro/nanostructured MOFs and their derivatives are summarized, and their corresponding prospects are also discussed.

Hierarchical Structure: An effective Strategy to Enhance the Mechanical Performance and Fire Safety of Unsaturated Polyester Resin

It is still a big challenge to prepare polymer/layered double hydroxide (LDH) composites with high performance, due to the strong agglomeration tendency of LDHs in the polymeric matrix. In this study, to avoid the agglomerated situation, the orientated LDH nanosheets were vertically grown on a ramie fabric surface, which was then embedded in unsaturated polyester resin (UPR) through the combination method of hand lay-up and vacuum bag. Due to the increased contact area and the restricted interfacial slip in the in-plane direction, the hierarchically LDH-functionalized ramie fabrics (denoted as Textile@LDH) significantly enhanced the mechanical performance of UPR composites. Then, the phosphorus- and silicon-containing coating (PSi) was used for the further improvement of the interfacial adhesion. The tensile strength of UPR/Textile@LDH@PSi composites increased by 121.67%, compared to that of neat UPR. The reinforcement mechanism was studied through analyzing the surface nano/microstructure and wetting properties of the raw and modified textiles, as well as the interfacial interaction between the ramie fabrics and UPR. Meanwhile, the thermal stability, thermal conductivity, and flame-retardant performance of ramie-reinforced UPR composites were improved. Particularly, as-prepared hierarchical Textile@LDH@PSi inhibited the heat release during the combustion process of fabric-reinforced UPR composites, and the peak heat release rate and total heat release values decreased by 36.56 and 47.57%, respectively, compared with the neat UPR/Textile composites. The suppression mechanism was further explored by analyzing the microstructure and chemical compositions of char residues. This research paved a feasible solution to improve the poor dispersion of LDHs in polymers and prepared the high-performance UPR composites with multifunctional applications.

Interface Electronic Coupling in Hierarchical FeLDH(FeCo)/Co(OH)2 Arrays for Efficient Electrocatalytic Oxygen Evolution

The oxygen evolution reaction (OER) with sluggish kinetics is the key half-cell reaction for several sustainable energy systems, such as electrochemical water splitting, fuel cells, and rechargeable metal-air batteries. Two-dimensional transition-metal hydroxides have good prospects for the OER. Herein, 2D hierarchical FeLDH(FeCo)/Co(OH)₂ (LDH=layered double hydroxide) arrays were fabricated by growing 2D-ZIF-67 (ZIF=zeolitic imidazolate framework) on carbon cloth, transformation of 2D-ZIF-67 into Co(OH)₂ , and electrodeposition of FeLDH(FeCo) on Co(OH)₂ at ambient temperature. The optimized hierarchical catalyst exhibits high OER activity that requires a small overpotential of only 242 mV to drive 10 mA cm^-2 (279 mV for 100 mA cm^-2 ) and prolonged durability for 100 h at 20 mA cm^-2 in 1 m KOH. The FeLDH(FeCo)/Co(OH)₂ interfaces are observed to be the electrocatalytically active centers for the OER. The interfaces contribute to accelerating the OER kinetics owing to fast transfer of intermediate oxygen species. Furthermore, the FeCo alloy promotes electron transfer among the newly formed interfaces related to CoOOH in the OER process, which leads to improved durability. This work gives insight into the design and synthesis of hierarchical bimetallic hydroxide arrays with high OER activity and durability, as well as understanding of the origin of the OER promotion by metals and metal hydroxides.

Multishelled Transition Metal-Based Microspheres: Synthesis and Applications for Batteries and Supercapacitors

With the rapid growth of material innovations, multishelled hollow nanostructures are of tremendous interest due to their unique structural features and attractive physicochemical properties. Continued effort has been made in the geometric manipulation, composition complexity, and construction diversity of this material, expanding its applications. Energy storage technology has benefited from the large surface area, short transport path, and excellent buffering ability of the nanostructures. In this work, the general synthesis of multishelled hollow structures, especially with architecture versatility, is summarized. A wealth of attractive properties is also discussed for a wide area of potential applications based on energy storage systems, including Li-ion/Na-ion batteries, supercapacitors, and Li-S batteries. Finally, the emerging challenges and outlook for multishelled hollow structures are mentioned.

Current Status and Future Prospects of Metal-Sulfur Batteries

Lithium-sulfur batteries are a major focus of academic and industrial energy-storage research due to their high theoretical energy density and the use of low-cost materials. The high energy density results from the conversion mechanism that lithium-sulfur cells utilize. The sulfur cathode, being naturally abundant and environmentally friendly, makes lithium-sulfur batteries a potential next-generation energy-storage technology. The current state of the research indicates that lithium-sulfur cells are now at the point of transitioning from laboratory-scale devices to a more practical energy-storage application. Based on similar electrochemical conversion reactions, the low-cost sulfur cathode can be coupled with a wide range of metallic anodes, such as sodium, potassium, magnesium, calcium, and aluminum. These new "metal-sulfur" systems exhibit great potential in either lowering the production cost or producing high energy density. Inspired by the rapid development of lithium-sulfur batteries and the prospect of metal-sulfur cells, here, over 450 research articles are summarized to analyze the research progress and explore the electrochemical characteristics, cell-assembly parameters, cell-testing conditions, and materials design. In addition to highlighting the current research progress, the possible future areas of research which are needed to bring conversion-type lithium-sulfur and other metal-sulfur batteries into the market are also discussed.