An Enantioselective Bidentate Auxiliary Directed Palladium-Catalyzed Benzylic C−H Arylation of Amines Using a BINOL Phosphate Ligand

PdII -Catalyzed Enantioselective C(sp3 )-H Arylation of Cyclobutyl Ketones Using a Chiral Transient Directing Group

The use of chiral transient directing groups (TDGs) is a promising approach for developing PdII -catalyzed enantioselective C(sp3 )-H activation reactions. However, this strategy is challenging because the stereogenic center on the TDG is often far from the C-H bond, and both TDG covalently attached to the substrate and free TDG are capable of coordinating to PdII centers, which can result in a mixture of reactive complexes. We report a PdII -catalyzed enantioselective β-C(sp3 )-H arylation reaction of aliphatic ketones using a chiral TDG. A chiral trisubstituted cyclobutane was efficiently synthesized from a mono-substituted cyclobutane through sequential C-H arylation reactions, thus demonstrating the utility of this method for accessing structurally complex products from simple starting materials. The use of an electron-deficient pyridone ligand is crucial for the observed enantioselectivity. Interestingly, employing different silver salts can reverse the enantioselectivity.

Palladium-Catalyzed Oxidation of β-C(sp3)-H Bonds of Primary Alkylamines through a Rare Four-Membered Palladacycle Intermediate

Site-selective functionalizations of C-H bonds are often achieved with a directing group that leads to five- or six-membered metallacyclic intermediates. Analogous reactions that occur through four-membered metallacycles are rare. We report a challenging palladium-catalyzed oxidation of primary C-H bonds β to nitrogen in an imine of an aliphatic amine, a process that occurs through a four-membered palladacyclc intermediate. The success of the reaction relies on the identification, by H/D exchange, of a simple directing group (salicylaldehyde) capable of inducing the formation of this small ring. To gain insight into the steps of the catalytic cycle of this unusual oxidation reaction, a series of mechanistic experiments and density functional theory (DFT) calculations were conducted. The experimental studies showed that cleavage of the C-H bond is rate-limiting and formation of the strained four-membered palladacycle is thermodynamically uphill. DFT calculations corroborated these conclusions and suggested that the presence of an intramolecular hydrogen bond between the oxygen of the directing group and hydroxyl group of the ligating acetic acid is crucial for stabilization of the palladacyclic intermediate.

Recent applications of chiral phosphoric acids in palladium catalysis

Through the combined action of palladium catalysts and chiral phosphoric acids (CPAs) a variety of catalytic asymmetric reactions have been realized during the past decade, including allylation, alkene functionalization, and C-H activation. This review surveys key examples across these various reaction types and examines the different mechanisms by which CPAs can affect stereoinduction in these reaction systems.

Bidentate Directing Groups: An Efficient Tool in C-H Bond Functionalization Chemistry for the Expedient Construction of C-C Bonds

During the past decades, synthetic organic chemistry discovered that directing group assisted C-H activation is a key tool for the expedient and siteselective construction of C-C bonds. Among the various directing group strategies, bidentate directing groups are now recognized as one of the most efficient devices for the selective functionalization of certain positions due to fact that its metal center permits fine, tunable, and reversible coordination. The family of bidentate directing groups permit various types of assistance to be achieved, such as N,N-dentate, N,O-dentate, and N,S-dentate auxiliaries, which are categorized based on the coordination site. In this review, we broadly discuss various C-H bond functionalization reactions for the formation of C-C bonds with the aid of bidentate directing groups.

Asymmetric construction of quaternary α-nitro amides by palladium-catalyzed C(sp3)–H arylation

A Pd-catalyzed enantioselective C(sp³)–H arylation of N-(o-Br-aryl) anilides has been disclosed for the preparation of optically active quaternary amino acid derivatives. Quaternary α-nitro amides are constructed with stereoselectivities of up to 98% ee.

Catalytic Enantioselective Methylene C(sp3 )-H Amidation of 8-Alkylquinolines Using a Cp*RhIII /Chiral Carboxylic Acid System

Catalytic enantioselective directed methylene C(sp³ )-H amidation reactions of 8-alkylquinolines using a Cp*Rh^III /chiral carboxylic acid (CCA) hybrid catalytic system are described. A binaphthyl-based chiral carboxylic acid efficiently differentiates between the enantiotopic methylene C-H bonds, which leads to the formation of C-N bonds with good enantioselectivity.

Thioketone-directed rhodium(I) catalyzed enantioselective C-H bond arylation of ferrocenes

Planar chiral ferrocenes have received great attention in both academia and industry. Although remarkable progresses have been made over the past decade, the development of efficient and straightforward methods for the synthesis of enantiopure  planar chiral  ferrocenes remains highly challenging. Herein, we report a rhodium(I)/phosphonite catalyzed thioketone-directed enantioselective C-H bond arylation of ferrocenes. Readily available aryl iodides are used as the coupling partners in this transformation, leading to a series of planar chiral ferrocenes in good yields and excellent enantioselectivities (up to 86% yield, 99% ee). Of particular note, heteroaryl coupled ferrocenes, which are difficult to access with previous approaches, can be obtained in satisfactory results.

A Computational Mechanistic Study of Pd(II)-Catalyzed Enantioselective C(sp3)-H Borylation: Roles of APAO Ligands

A computational mechanistic study has been performed on Pd(II)-catalyzed enantioselective reactions involving acetyl-protected aminomethyl oxazolines (APAO) ligands that significantly improved reactivity and selectivity in C(sp³)-H borylation. The results support a mechanism including initiation of C(sp³)-H bond activation generating a five-membered palladacycle and ligand exchange, followed by HPO₄^2--promoted transmetalation. These resulting Pd(II) complexes further undergo sequential reductive elimination by coordination of APAO ligands and protonation to afford the enantiomeric products and deliver Pd(0) complexes, which will then proceed by oxidation and deprotonation to regenerate the catalyst. The C(sp³)-H activation is found to be the rate- and enantioselectivity-determining step, in which the APAO ligand acts as the proton acceptor to form the two enantioselectivity models. The results demonstrate that the diverse APAO ligands control the enantioselectivity by differentiating the distortion and interaction between the major and minor pathways.

Enantioselective benzylic C-H arylation via photoredox and nickel dual catalysis

The asymmetric cross-coupling reaction is developed as a straightforward strategy toward 1,1-diaryl alkanes, which are a key skeleton in a series of natural products and bioactive molecules in recent years. Here we report an enantioselective benzylic C(sp³)−H bond arylation via photoredox/nickel dual catalysis. Sterically hindered chiral biimidazoline ligands are designed for this asymmetric cross-coupling reaction. Readily available alkyl benzenes and aryl bromides with various functional groups tolerance can be easily and directly transferred to useful chiral 1,1-diaryl alkanes including pharmaceutical intermediates and bioactive molecules. This reaction proceeds smoothly under mild conditions without the use of external redox reagents.

Chiral 1,1-diaryl alkanes are important targets in pharmaceutical industry. Here, the authors report report a redox-neutral enantioselective benzylic C−H bond arylation via photoredox/nickel dual catalysis accessing chiral 1,1-diarylalkane compounds under mild conditions.

Enantio- and Diastereoswitchable C-H Arylation of Methylene Groups in Cycloalkanes

A complementary set of chiral N,N-ligands enables the Pd-catalyzed β-C-H arylation of unbiased internal methylene groups in good yield and with high levels of enantio- and diastereoinduction. Both the dia- and enantioselectivity can be reversed, thus allowing the selective arylation of any of the four β-C-H bonds in cycloalkanecarboxamides of various ring sizes. The method is applicable to a broad range of aryl iodides with electron-withdrawing and -donating substituents in the o-, m-, or p-position.

Enantioselective Arylation of Benzylic C-H Bonds by Copper-Catalyzed Radical Relay

A novel enantioselective copper-catalyzed arylation of benzylic C-H bonds, using alkylarenes as a limiting reagent, has been developed. A chiral bisoxazoline ligand bearing an acetate ester moiety plays a key role in both the reactivity and enantioselectivity of the reaction. The reaction provides efficient access to various chiral 1,1-diarylalkanes in good yields with good to excellent enantioselectivities, and displays excellent functional-group tolerance.

Catalytic, Enantioselective α-Alkylation of Azlactones with Nonconjugated Alkenes by Directed Nucleopalladation

A palladium(II)-catalyzed enantioselective α-alkylation of azlactones with nonconjugated alkenes is described. The reaction employs a chiral BINOL-derived phosphoric acid as the source of stereoinduction, and a cleavable bidentate directing group appended to the alkene to control the regioselectivity and stabilize the nucleopalladated alkylpalladium(II) intermediate in the catalytic cycle. A wide range of azlactones were found to be compatible under the optimal reaction conditions to afford products bearing α,α-disubstituted α-amino-acid derivatives with high yields and high enantioselectivity.

PdII -Catalyzed Enantioselective C(sp3 )-H Activation/Cross-Coupling Reactions of Free Carboxylic Acids

Pd^II -catalyzed enantioselective C(sp³ )-H cross-coupling of free carboxylic acids with organoborons has been realized using either mono-protected amino acid (MPAA) ligands or mono-protected aminoethyl amine (MPAAM) ligands. A diverse range of aryl- and vinyl-boron reagents can be used as coupling partners to provide chiral carboxylic acids. This reaction provides an alternative approach to the enantioselective synthesis of cyclopropanecarboxylic acids and cyclobutanecarboxylic acids containing α-chiral tertiary and quaternary stereocenters. The utility of this reaction was further demonstrated by converting the carboxylic acid into cyclopropyl amine without loss of optical activity.

Assembling a Hybrid Pd Catalyst from a Chiral Anionic CoIII Complex and Ligand for Asymmetric C(sp3 )-H Functionalization

An unusual hybrid palladium catalyst containing an anionic chiral Co^III complex and a chiral phosphoramidite ligand shows a high capacity for catalyzing asymmetric thioamide-directed C(sp³ )-H arylation and delivers excellent yield and enantioselectivity (up to 99 % yield, 99 % ee). Significant synergy between the chiral ligand and the anion in terms of stereochemical control was observed. Mechanistic investigations have revealed both the nature of the C-H activation and the origin of the enantioselectivity.

Iridium-Catalyzed, β-Selective C(sp3)-H Silylation of Aliphatic Amines To Form Silapyrrolidines and 1,2-Amino Alcohols

The functionalization of unactivated C(sp³)-H bonds of aliphatic amines catalyzed by transition-metal complexes is important because amine-based functionality is present in a majority of biologically active molecules and commercial pharmaceuticals. However, such reactions are underdeveloped and challenging to achieve in general because the basicity and reducing properties of alkylamines tends to interfere with potential reagents and catalysts. The functionalization of C-H bonds β to the nitrogen of aliphatic amines to form prevalent 1,2-amino functionalized structures is particularly challenging because the C-H bond β to nitrogen is stronger than the C-H bond α to nitrogen, and the nitrogen in the amine or its derivatives usually directs a catalyst to react at more distal γ- and δ-C-H bonds to form 5- or 6-membered metallacyclic intermediate. The enantioselective functionalization of a C-H bond at any position in amines also has been vexing and is currently limited to reactions of specific, sterically hindered, cyclic structures. We report iridium-catalyzed, β-selective silylations of unactivated C(sp³)-H bonds of aliphatic amines to form silapyrrolidines that are both silicon-containing analogs of common saturated nitrogen heterocycles and precursors to 1,2-amino alcohols by Tamao-Fleming oxidation. These silylations of amines are accomplished by introducing a simple methylene linker between the heteroatom and silicon that has not been used previously for the silylation of C-H bonds. The reactions occur with high enantioselectivity when catalyzed by complexes of new chiral, pyridyl imidazoline ligands, and the rates of reactions with catalysts of these highly basic ligands are particularly fast, occuring in some cases at or even below room temperature.

Computational Exploration of a Pd(II)-Catalyzed γ-C-H Arylation Where Stereoselectivity Arises from Attractive Aryl-Aryl Interactions

The enantioselective Pd(II)-catalyzed γ-C-H arylation of picolinamides with a chiral BINOL phosphate ligand was explored using density functional theory (DFT). Enantioselectivity arises from attractive aryl-aryl interactions between the pseudoequatorial phenyl substituent of the substrate and the chiral BINOL phosphate ligand.

Mechanistic investigation into the C(sp3)-H acetoxylation of morpholinones

The study of a selective palladium(ii)-catalyzed C(sp³)–H acetoxylation reaction on a class of cyclic alkyl amines is reported.

The study of a selective palladium(ii)-catalyzed C(sp³)–H acetoxylation reaction on a class of cyclic alkyl amines is reported. Computational modelling and kinetic studies were used to provide support for a mechanism involving selective C–O bond formation from a γ-aminoalkyl-Pd(iv) intermediate. The C–O bond forming step was computed to occur by a dissociative ionization mechanism followed by an S_N2 process involving external acetate attack at the C–Pd(iv) bond. This pathway was computed to be of lowest energy with no competing C–N products observed. Additionally, with a few modifications to reaction conditions, preliminary studies showed that this process could be rendered enantioselective in the presence of a non-racemic BINOL-phosphoric acid.

Pd(II)-Catalyzed Enantioselective C(sp3)-H Arylation of Free Carboxylic Acids

A monoprotected aminoethyl amine chiral ligand based on an ethylenediamine backbone was developed to achieve Pd-catalyzed enantioselective C(sp3)-H arylation of cyclopropanecarboxylic and 2-aminoisobutyric acids without using exogenous directing groups. This new chiral catalyst affords new disconnection for preparing diverse chiral carboxylic acids from simple starting materials that are complementary to the various ring forming approaches.

Enantioselective C(sp3)‒H bond activation by chiral transition metal catalysts

Organic molecules are rich in carbon-hydrogen bonds; consequently, the transformation of C-H bonds to new functionalities (such as C-C, C-N, and C-O bonds) has garnered much attention by the synthetic chemistry community. The utility of C-H activation in organic synthesis, however, cannot be fully realized until chemists achieve stereocontrol in the modification of C-H bonds. This Review highlights recent efforts to enantioselectively functionalize C(sp³)-H bonds via transition metal catalysis, with an emphasis on key principles for both the development of chiral ligand scaffolds that can accelerate metalation of C(sp³)-H bonds and stereomodels for asymmetric metalation of prochiral C-H bonds by these catalysts.