Cooperative Chirality and Sequential Energy Transfer in a Supramolecular Light-Harvesting Nanotube

Construction of Artificial Light-Harvesting Systems Based on Aggregation-Induced Emission Type Supramolecular Self-Assembly Metallogels

A method for preparing new artificial light-harvesting systems (ALHSs) based on supramolecular metallogels was proposed. Various metal ions were introduced into a solution of a bi-benzimidazole compound (P) in ethylene glycol, and P exhibited high selectivity toward Al3+, as indicated by the noticeable red shift (49 nm) observed in the fluorescence spectra of P after the addition of Al3+. Interestingly, the gelator, P, could self-assemble into a stable supramolecular gel (P-gel) that exhibits strong aggregation-induced emission in ethylene glycol. Thus, two ALHSs were successfully prepared in a gel environment. The P-Al3+ assembly acts as the donor in the ALHSs, while BODIPY 505/515 (BDP) and rhodamine 6G (Rh6G), which are loaded onto the P-Al3+ assembly, act as acceptors. In these two diverse systems, the occurrence of an energy transfer process is confirmed from the P-Al3+ assembly to BDP and Rh6G. The findings of this study will enable the design and fabrication of ALHSs.

Chiral Naphthalenediimides with High-Efficiency Fluorescence and Circularly Polarized Luminescence in the Solid State for the Application in Organic Optoelectronics

Naphthalenediimides (NDIs) have been extensively studied due to their tunable luminescent properties. However, generally, the monomers or aggregates of non-core substituted NDIs exhibit low fluorescence quantum yields (Φ_FL <10 %) in the solid state, which limit their applications as light-emitting materials and render their chiral species unsuitable for circularly polarized luminescence (CPL). Herein, a series of non-core substituted chiral NDIs that exhibit high luminous efficiencies (Φ_FL up to 56.8 % for racemate and 36.5 % for enantiomer) and a strong CPL behavior in the solid state is reported. These significant improvements are attributed to the unique molecular conformation of the chiral NDIs and the formation of distinctive discrete dimers. The structures of the NDIs were significantly simpler and more accessible than those of other NDIs. The findings evidence that non-core substituted NDIs can exhibit strong fluorescence in the solid state and provide a new pathway to improve photophysical properties of NDIs.

Artificial supramolecular light-harvesting systems based on a pyrene derivative for photochemical catalysis

A supramolecular polymer based on NPyP and CB[8] was constructed via host–guest interactions with the AIE effect for artificial light-harvesting energy transfer and photocatalysis.

Two-Dimensional Excitonic Networks Directed by DNA Templates as an Efficient Model Light-Harvesting and Energy Transfer System

Photosynthetic organisms organize discrete light-harvesting complexes into large-scale networks to facilitate efficient light collection and utilization. Inspired by nature, herein, synthetic DNA templates were used to direct the formation of dye aggregates with a cyanine dye, K21, into discrete branched photonic complexes, and two-dimensional (2D) excitonic networks. The DNA templates ranged from four-arm DNA tiles, ≈10 nm in each arm, to 2D wireframe DNA origami nanostructures with different geometries and varying dimensions up to 100×100 nm. These DNA-templated dye aggregates presented strongly coupled spectral features and delocalized exciton characteristics, enabling efficient photon collection and energy transfer. Compared to the discrete branched photonic systems templated on individual DNA tiles, the interconnected excitonic networks showed approximately a 2-fold increase in energy transfer efficiency. This bottom-up assembly strategy paves the way to create 2D excitonic systems with complex geometries and engineered energy pathways.

Designs and Applications of Multi-stimuli Responsive FRET Processes in AIEgen-Functionalized and Bi-fluorophoric Supramolecular Materials

Materials capable of displaying strong ratiometric fluorescence with Förster resonance energy transfer (FRET) processes have attracted much research interest because of various chemosensor and biomedical applications. This review highlights several popular strategies in designing FRET-OFF/ON mechanisms of ratiometric fluorescence systems. In particular, the developments of organic and polymeric FRET materials featuring aggregation-induced emission-based luminogens (AIEgens), supramolecular assemblies, photochromic molecular switches and surfactant-induced AIE/FRET mechanisms are presented. AIEgens have been frequently employed as FRET donor and/or acceptor fluorophores to obtain enhanced ratiometric fluorescences in solution and solid states. Since AIE effects and FRET processes rely on controllable distances between fluorophores, many interesting fluorescent properties can be designed by regulating aggregation states in polymers and supramolecular systems. Photo-switchable fluorophores, such as spiropyran and diarylethene, provide drastic changes in fluorescence spectra upon photo-induced isomerizations, leading to photo-switching mechanisms to activate/deactivate FRET processes. Supramolecular assemblies offer versatile platforms to regulate responsive FRET processes effectively. In rotaxane structures, the donor-acceptor distance and FRET efficiency can be tuned by acid/base-controlled shuttling of the macrocycle component. The tunable supramolecular interactions are strongly influenced by external factors (such as pH values, temperatures, analytes, surfactants, UV-visible lights, etc.), which induce the assembly and disassembly of host-guest systems and thus their FRET-ON/FRET-OFF behavior. In addition, the changes in donor or acceptor fluorescence profiles upon detections of analytes can also sufficiently alter the FRET behavior and result in different ratiometric fluorescence outputs. The strategies and examples provided in this review offer the insights and toolkits for future FRET-based material developments.

Tunable Circularly Polarized Luminescence via Chirality Induction and Energy Transfer from Organic Films to Semiconductor Nanocrystals

Circularly polarized luminescent (CPL) films with high dissymmetry factors hold great potential for optoelectronic applications. Herein, we propose a strategy for achieving strongly dissymetric CPL in nanocomposite films based on chirality induction and energy transfer to semiconductor nanocrystals. First, focusing on a purely organic system, aggregation-induced emission (AIE) and CPL activity of organic liquid crystals (LCs) forming helical nanofilaments was detected, featuring green emission with high dissymmetry factors g_lum ∼ 10^-2. The handedness of helical filaments, and thus the sign of CPL, was controlled via minute amounts of a small chiral organic dopant. Second, nanocomposite films were fabricated by incorporating InP/ZnS semiconductor quantum dots (QDs) into the LC matrix, which induced the chiral assembly of QDs and endowed them with chiroptical properties. Due to the spectral matching of the components, energy transfer (ET) from LC to QDs was possible enabling a convenient way of tuning CPL wavelengths by varying the LC/QD ratio. As obtained, composite films exhibited absolute g_lum values up to ∼10^-2 and thermally on/off switchable luminescence. Overall, we demonstrate the induction of chiroptical properties by the assembly of nonchiral building QDs on the chiral organic template and energy transfer from organic films to QDs, representing a simple and versatile approach to tune the CPL activity of organic materials.

Supramolecular polymers based on host-guest interactions for the construction of artificial light-harvesting systems

In the present work, artificial light-harvesting systems with a fluorescence resonance energy transfer (FRET) process were successfully obtained in the aqueous solution. We designed and synthesized an amphiphilic pyrene derivative with two 4-vinylpyridium arms (Pmvb), which can interact with cucurbit[8]uril (CB[8]) to form supramolecular polymer through host-guest interactions in aqueous solution. The formation of supramolecular polymers results in a significant enhancement of fluorescence, which makes Pmvb-CB[8] an ideal energy donor to construct artificial light-harvesting systems in the aqueous solution. Subsequently, two different fluorescence dyes Rhodamine B (RhB) and Sulforhodamine 101 (SR101) were introduced as energy acceptors into the solution of Pmvb-CB[8] respectively, to fabricate two different artificial light-harvesting systems. The obtained artificial light-harvesting systems can achieve an efficient energy transfer process from Pmvb-CB[8] to RhB or SR101 with high energy transfer efficiency.

Novel Strategy of Constructing Artificial Light-Harvesting System with Two-Step Sequential Energy Transfer for Efficient Photocatalysis in Water

An efficient artificial light-harvesting system with a two-step sequential energy transfer was fabricated in the aqueous solution based on the host-guest interactions between cyano-substituted p-phenylenevinylene derivative (PPTA) and a water-soluble pillar[5]arene (WP5). PPTA-WP5 complex could self-assemble into nanoparticles, and two fluorescent dyes eosin Y (EY) and Nile Red (NIR) are employed as acceptors to realize sequential energy transfer. The PPTA-WP5-EY-NIR system could achieve efficient two-step sequential energy transfer process from PPTA-WP5 to EY and then to NIR (67% for the first step and 66% for the second step). Moreover, to make full use of the harvested energy, the hydrophobic microenvironment in the assembled nanoparticles is used to promote the aerobic cross-dehydrogenative coupling (CDC) reaction in aqueous medium with 88% yield after 12 h of irradiation. To our knowledge, this is the first example of artificial LHS with two-step energy transfer used to catalyze the CDC reaction in aqueous medium. This work directly mimics the function of photosynthesis in nature of converting solar energy into chemical energy in aqueous solution.

Artificial Light-Harvesting System with White-Light Emission in a Bicontinuous Ionic Medium

Artificial light-harvesting systems (ALHSs), which are closely related to Förster resonance energy transfer (FRET), are among the most attractive scientific topics during the past few decades. Specifically, binary ALHSs that are composed of a fluid donor and acceptor have a simplified composition and high number density of the donor units. However, largely due to the difficulty in obtaining a fluid donor, investigation of these systems is still quite limited, especially for the ionic systems. Herein, we report a new type of binary ALHS using an ionic naphthalimide (NPI) derivative as a donor, which shows greatly improved photoluminescence for its bicontinuous liquid structure. When blending with an acceptor such as rhodamine 6G or trans-4-[4-(dimethylamino)styryl]-methylpyridinium iodide, efficient FRET was confirmed by both experimental results and molecular dynamics simulations, with an energy transfer efficiency up to ∼90%. Tunable color, including white-light emission, was achieved by tuning the acceptor/donor ratio, opening the door for a variety of applications such as light-emitting diodes and photoluminescent inks.

Methionine-Derived Organogels as Lubricant Additives Enhance the Continuity of the Oil Film through Dynamic Self-Healing Assembly

(S)-2-((1-(Hexadecylamino)-4-(methylthio)-1-oxobutan-2-yl)carbamoyl)benzoic acid (HMTA) was efficiently synthesized and successfully applied as an additive to several types of blank lubricant oils. Initially, HMTA self-assembles to fibrous structures and traps blank lubricant oils to form gel lubricants. The prepared gel lubricants show thermo-reversible properties and enhanced lubricating performance by 3∼5-fold. X-ray photoelectron spectrometry of the metal surface and the quartz crystal microbalance illustrated that there are no obvious interactions between HMTA and the metal surface. The results of Fourier transform infrared spectroscopy and X-ray diffraction further confirm that inter/intro-molecular H-bonding interactions are the main driving force for the self-healing of HMTA. Finally, molecular dynamics (MD) simulations show that the number of noncovalent H-bonding interactions fluctuates with time, and this highly dynamic H-bonding network could regulate the self-assembly process and result in the self-healing property of the HMTA organogel, which is consistent with the results of the step-strain tests. Especially, the Hirshfeld independent gradient model method at the quantum level demonstrated that C8/C9 aromatics of 500SN have strong π-π stacking interactions with the aromatic heads of HMTA and van der Waals interactions with the hydrophobic tails of HMTA, which disrupt the self-assembly behavior of the 500SN model. Therefore, the calculation studies offer a rational explanation for the superior lubricant property of the PAO10 gel as compared to that for 500SN.

Intramolecular Energy and Solvent-Dependent Chirality Transfer within a BINOL-Perylene Hetero-Cyclophane

Multichromophoric macrocycles and cyclophanes are important supramolecular architectures for the elucidation of interchromophoric interactions originating from precise spatial organization. Herein, by combining an axially chiral binaphthol bisimide (BBI) and a bay-substituted conformationally labile twisted perylene bisimide (PBI) within a cyclophane of well-defined geometry, we report a chiral PBI hetero-cyclophane (BBI-PBI) that shows intramolecular energy and solvent-regulated chirality transfer from the BBI to the PBI subunit. Excellent spectral overlap and spatial arrangement of BBI and PBI lead to efficient excitation energy transfer and subsequent PBI emission with high quantum yield (80-98 %) in various solvents. In contrast, chirality transfer is strongly dependent on the respective solvent as revealed by circular dichroism (CD) spectroscopy. The combination of energy and chirality transfer affords a bright red circularly polarized luminescence (CPL) from the PBI chromophore by excitation of BBI.

Hierarchical supramolecular co-assembly formation employing multi-component light-harvesting charge transfer interactions giving rise to long-wavelength emitting luminescent microspheres

Charge transfer (CT) interaction induced formation of a hierarchical supramolecular assembly has attracted attention due to its wide diversity of structural and functional characteristics. In the present work, we report the generation of green luminescent microspheres from the charge transfer interaction induced co-assembly of a bis-naphthyl dipicolinic amide (DPA) derivative with tetracyanobenzene (TCNB) for the first time. The properties of these self-assemblies were studied both in solution and the solid-state using spectroscopic and a variety of microscopy techniques. The X-ray crystal structure analysis showed a mixed stack arrangement of DPA and TCNB. The molecular orbital and energy level calculations confirm the charge transfer complex formation between DPA and TCNB. Furthermore, energy transfer was observed from the green luminescent CT complex to a red-emitting dye, pyronin Y, in the microsphere matrix, leading to the formation of a light-harvesting tri-component self-assembly.

Synchronous Imaging in Golgi Apparatus and Lysosome Enabled by Amphiphilic Calixarene-Based Artificial Light-Harvesting Systems

Artificial supramolecular light-harvesting systems have expanded various properties on photoluminescence, enabling promising applications on cell imaging, especially for imaging in organelles. Supramolecular light-harvesting systems have been used for imaging in some organelles such as lysosome, Golgi apparatus, and mitochondrion, but developing a supramolecular light-harvesting platform for imaging two organelles synchronously still remains a great challenge. Here, we report a series of lower-rim dodecyl-modified sulfonato-calix[4]arene-mediated supramolecular light-harvesting platforms for efficient light-harvesting from three naphthalene diphenylvinylpyridiniums containing acceptors, Nile Red, and Nile Blue. All of the constructed supramolecular light-harvesting systems possess high light-harvesting efficiency. Furthermore, when the two acceptors are loaded simultaneously in a single light-harvesting donor system for imaging in human prostate cancer cells, organelle imaging in lysosome and Golgi apparatus can be realized at the same time with distinctive wavelength emission. Nile Red receives the light-harvesting energy from the donors, reaching orange emissions (625 nm) in lysosome while Nile Blue shows a near-infrared light-harvesting emission at 675 nm in Golgi apparatus in the same cells. Thus, the light harvesting system provides a pathway for synchronously efficient cell imaging in two distinct organelles with a single type of photoluminescent supramolecular nanoparticles.

Stoichiometric Ratio Controlled Dimension Transition and Supramolecular Chirality Enhancement in a Two-Component Assembly System

To control the dimension of the supramolecular system was of great significance. We construct a two component self-assembly system, in which the gelator LHC18 and achiral azobenzene carboxylic acid could co-assembly and form gels. By modulating the stoichiometric ratio of the two components, not only the morphology could be transformed from 1D nanaotube to 0D nanospheres but also the supramolecualr chirality could be tuned. This work could provide some insights to the control of dimension and the supramolecular chirality in the two-component systems by simply modulating the stoichiometric ratio.

High-Performance Circularly Polarized Electroluminescence with Simultaneous Narrowband Emission, High Efficiency, and Large Dissymmetry Factor

Organic light-emitting diodes (OLEDs) that can simultaneously achieve narrowband emission, high efficiency, and circularly polarized luminescence remain a formidable challenge. In this study, a simple strategy is developed to address this challenge. A chiral exciplex-forming co-host is first designed by employing a chiral donor and an achiral acceptor molecule. The chiral exciplex host enables an achiral green multiple-resonance thermally activated delayed fluorescence emitter to achieve high-performance circularly polarized electroluminescence (CP-EL) with a high external quantum efficiency of 33.2%, large electroluminescence dissymmetry factor of 2.8 × 10^-3 , and a small full-width at half-maximum of 42 nm. This work provides a general approach for realizing CP-EL using easily available achiral emitters and can significantly extend the scope of circularly polarized OLEDs.

Chiral-Induced Ultrathin Covalent Organic Frameworks Nanosheets with Tunable Circularly Polarized Luminescence

Development of covalent organic frameworks (COFs) with circularly polarized luminescence (CPL) is still challenging. Here we first reported ultrathin COFs nanosheets (NS) based CPL materials using a chiral induced-synthesis strategy. Chiral amines served as chiral inducers to give COF TpBpy with chirality and participated in the modification of TpBpy, inhibiting the fluorescence quenching caused by π-π stacking to form ultrathin luminescent chiral COFs (chirCOFs) NS. The obtained chirCOFs R-/S-TpBpy NS had strong chirality and intense red CPL property with a |g_lum| of ∼0.02. Afterward, the carboxyl containing green and blue fluorescent dye molecules were postmodified onto the chirCOFs NS (chirCOFs/Dyes) to achieve color-adjustable CPL. Due to the chirality and energy transfer between chirCOFs and dye groups, the obtained chirCOFs/Dyes showed strong chirality and increased and tunable photoluminescence, exhibiting excellent, tunable, and amplified CPL performance with a maximum |g_lum| of ∼0.1, which was ∼5 times stronger than that of as-prepared chirCOFs NS. Moreover, the corresponding chirCOFs NS were dispersed into a polydimethylsiloxane (PDMS) matrix to form wafer size, highly transparent, and flexible COFs/PDMS films for practical CPL application. This study opens a new strategy to prepare ultrathin chirCOFs NS with strong and tunable CPL by chiral induction and provides a new approach for the preparation of transparent, large size, and flexible COFs composite films in chiral optical applications.

Fluorescent TPE Macrocycle Relayed Light-Harvesting System for Bright Customized-Color Circularly Polarized Luminescence

Artificial systems for sequential chirality transmission/amplification and energy relay are perpetual topics that entail learning from nature. However, engineering chiral light-harvesting supramolecular systems remains a challenge. Here, we developed new chiral light-harvesting systems with a sequential Förster resonance energy transfer process where a designed blue-violet-emitting BINOL (1,1'-Bi-2-naphthol) compound, BINOL-di-octadecylamide (BDA), functions as an initiator of chirality and light absorbance, a new green-emitting hexagonal tetraphenylethene-based macrocycle (TPEM) with aggregation-induced emission serves as a conveyor, and Nile red (NiR) or/and a near-infrared dye, tetraphenylethene (TPE)-based benzoselenodiazole (TPESe), are the terminal acceptors. Benefiting from the close contact and large optical overlap between donors and acceptors at each level, triad and tetrad relaying systems sequentially and efficiently furnish chirality transmission/amplification and energy transfer along the cascaded line BDA-TPEM-NiR (or/and TPESe), leading to bright customized-color circularly polarized luminescence (CPL) and bright white-light-emitting CPL (CIE coordinates: 0.33, 0.34) with an amplified dissymmetry factor (glum) of 3.5 × 10-2 over a wide wavelength range. This work provides a new direction for the construction of chiral light-harvesting systems for a broad range of applications in chiroptical physics and chemistry.

An ultralow-acceptor-content supramolecular light-harvesting system for white-light emission

White-light emission in donor-acceptor systems usually requires relatively high acceptor content and/or multiple acceptors to "neutralize" the primary color of donors. Herein, a cyanostilbene-bridged ditopic ureidopyrimidinone donor (CSU) was designed and synthesized, which can self-assemble into dispersed nanoparticles in water. Fascinatingly, efficient white-light emission can be realized by co-assembling 0.1% DBT into the nanoparticles through a light-harvesting strategy. This new system is further demonstrated for use in white-light encryption materials.

Circularly polarized luminescent porous crystalline nanomaterials

Circularly polarized luminescence (CPL)-active materials have attracted exclusive attention because of their wide potential applications in low-power-consumption displays, encrypted information storage, chiroptical sensors, and so on. However, there is always a trade-off between the luminescence dissymmetry factor (g_lum) and luminescence quantum yield, which are two critical parameters. Therefore, developing materials with both large g_lum values and high luminescence efficiency is a key issue for constructing high-efficiency CPL materials. To date, chiral porous crystalline nanomaterials (PCNMs) including metal-organic frameworks (MOFs), porous organic-cages (POCs), metal-organic cages (MOCs), and supramolecular organic frameworks (SOFs), have shown excellent potential for solving this problem and achieving functional CPL-active materials. In this review, we will summarize several approaches for fabricating CPL-active PCNMs, such as direct synthesis, chirality induction, and symmetry breaking. Furthermore, with flexibly tunable structures and comprehensive host-guest chemistry, modulation and amplification of CPL can be achieved in these PCNMs. We would like to provide insight and perspective that PCNMs can act as an efficient platform in the CPL research field.

Solvent-Modulated Chiral Self-Assembly: Selective Formation of Helical Nanotubes, Nanotwists, and Energy Transfer

As the medium for self-assembly processes, solvents strongly influence the supramolecular assemblies via specific solute-solvent interactions, which may result in effective modulation of properties, self-assembled nanostructures, and functions through varying the solvent. Here, two kinds of pyridine-cyanostilbene functionalized chiral amphiphiles (l/d-PyPhG and l-PyG) were designed, and their self-assembly behaviors in different solvents were investigated. It was found that both amphiphiles formed gels in dimethyl sulfoxide (DMSO) and self-assembled into right-handed nanotwists, while they formed suspensions in ethanol consisting of left-handed nanotubes. Although the molecular chirality in the compounds remained unchanged in the two solvents, the nanoassemblies showed opposite handedness at the nanoscale together with opposite circular dichroism (CD) and circularly polarized luminescence (CPL) signals. Furthermore, when the amphiphiles were co-assembled with an achiral dye, it was found that efficient energy transfer took place in the systems composed of nanotubes rather than those composed of nanotwists. Therefore, by assembling molecules with the same molecular chirality in different solvents, a selective formation of helical nanotubes or nanotwists and the regulation of handedness as well as energy transfer efficiency were achieved.

Novel fluorescent self-assembling material with gel properties: ion recognition and energy transfer

A novel fabrication strategy for preparing fluorescent nanomaterials has been proposed based on supramolecular self-assembly complexes and energy transfer. Here a dual acylhydrazone-functionalized molecule (DAF) was designed and synthesized by...

From a single helix to a helical porous metalloenzyme catalyst based on temperature sensitive polyionic liquids

It is a challenging task to construct helical structures through the assembly of achiral polymers.

Phthalocyanine-Triggered Helical Dipeptide Nanotubes with Intense Circularly Polarized Luminescence

Nanotubes with circularly polarized luminescence (CPL) are attracting much attention due to many potential applications, such as chiroptical materials, displays, and sensing. However, it remains a challenge to change the assemblies of ordinarily molecular building blocks into CPL supramolecular nanotubes. Herein, the regulation of quite common dipeptide (Fmoc-FF) assemblies into unprecedented helical nanotubes exhibiting intense CPL is reported by simply doping a few phthalocyanine (octakis(carboxyl)phthalocyaninato zinc complex (Pc)) molecules. Interestingly, altering the Fmoc-FF/Pc molar ratios over a wide range cannot change the nanotubes structures according to transmission electron microscopy (TEM) and atomic force microscope (AFM) measurements. Although molecular dynamics simulations suggest that the noncovalent interactions between Fmoc-FF and Pc are quite weak, few Pc molecules can still change the secondary structures of a large number of Fmoc-FF assemblies, which hierarchically form helical supramolecular nanotubes with long-range ordered molecular packing, leading to intense CPL signals with large luminescence dissymmetry factor (g_lum  = 0.04). Consequently, the chiral reorganization of Fmoc-FF assemblies is dependent on the coassembly between Pc molecule and Fmoc-FF supramolecular architectures. These results open the possibility for the fine-tuning of helix and supramolecular nanotubes with CPL properties by using a small number of cofactors.

Chiral macrocycle-induced circularly polarized luminescence of a twisted intramolecular charge transfer dye

The host-guest binding between a chiral macrocycle and an achiral dye could suppress the twisted intramolecular charge transfer (TICT) process, leading to enhanced emission and bright circularly polarized luminescence (CPL) from the originally achiral TICT-dye.

Chiral Self-Assembled Film from Semiconductor Nanorods with Ultra-Strong Circularly Polarized Luminescence

Chiroptical nanomaterials have generated significant levels of interest for generating strong circularly polarized luminescence (CPL) signals. We used the Langmuir-Schaeffer technique to generate the continuous and compact assembly of CdSe/CdS chiral film. We assembled achiral CdSe/CdS nanorods by controlling the number of layers and angles between different layers. This allowed us to tailor chiroptical properties to achieve high CPL signals. The chiral film was symmetrical and had the highest circular dichroism (CD) response and CPL signals with ten layers (RH (right-handed)-/LH (left-handed)-5 + 5 layers) and a 45° inter-angle. Specifically, RH-5+5 of the chiral film exhibited 1431 mdeg of CD activity and strong CPL signals with a dissymmetry factor (glum) of 0.0997. The helical stacked crystal plates with linear birefringence resulted in strong circular birefringence, as determined by the Reusch model. Electromagnetic simulations indicated that such remarkable optical activity was attributed to the birefringence and dichroism of the well-aligned CdSe/CdS nanorod layers in the chiral films. Under right/left circular polarized (RCP/LCP) light excitation, the well aligned semiconductor nanorods exhibited differences in the coupling efficiencies to RCP and LCP light. Our CdSe/CdS chiral films, which exhibit ultra-strong CPL activity, will provide a novel strategy for the fabrication of chiroptical devices.

Luminescent Chiral Exciplexes with Sky-Blue and Green Circularly Polarized-Thermally Activated Delayed Fluorescence

Luminescent exciplexes based on a chiral electron donor and achiral acceptors are reported as a new approach to design circularly polarized (CP) and thermally activated delayed fluorescence (TADF) emitters. This strategy results in rather high CP luminescence (CPL) values with g_lum up to 7×10^-3 , one order of magnitude higher in comparison to the CPL signal recorded for the chiral donor alone (g_lum ∼7×10^-4 ). This increase occurs concomitantly with a CPL sign inversion, as a result of the strong charge-transfer emission character, as experimentally and theoretically rationalized by using a covalent chiral donor-acceptor model. Interestingly, blue, green-yellow and red chiral luminescent exciplexes can be obtained by modifying with the electron accepting character of the achiral unit while keeping the same chiral donor unit. These results bring new (inter)molecular guidelines to obtain simply and efficiently multi-color CP-TADF emitters.

Controllable Circularly Polarized Electroluminescence Performance Improved by the Dihedral Angle of Chiral-Bridged Binaphthyl-Type Dopant Inducers

Chirality of 1,1'-binaphthol (BINOL) is due to the restricted rotation between two naphthalene rings, and its skeletal structure of binaphthyl unit can be further modified by choosing functionalized substituents to afford the enlarged chiral induction effect. In this paper, we designed and synthesized nine chiral binaphthyl derivatives (R/S-1-R/S-9) as circularly polarized electroluminescence (CP-EL) inducers by inserting various bridged alkyl chains into the hydroxyl groups of BINOL or introducing functionalized substituents with different steric hindrances on the 3,3'-position of 2,2'-methylenedioxy-1,1'-binaphthalene. Their molecular conformations and CPL behaviors of nine chiral inducers were significantly dependent on the length of the alkyl chain and the degree of substituent steric hindrance, which could further regulate their chiral induction effect on achiral fluorescent polymer F8BT from small to large in the doped films. Moreover, in virtue of the planar rigid conjugated molecular conformation of R/S-1, R/S-6, and R/S-9, the amplified CPL signals (|g_PL|) were detected as high as 2.36 × 10^-2, 2.06 × 10^-2, and 1.26 × 10^-2 from blends of F8BT and these chiral inducers. The circularly polarized organic light-emitting diode (CP-OLED) device on the blends of F8BT and chiral inducers (R/S-6) with small dihedron angle and excellent carrier mobility showed a low turn-on voltage (V_on < 4.5 V), high brightness (> 10509.6 cd/m²), and maximum |g_EL| value of 1.86 × 10^-2 (F8BT + 5% R/S-6). This work can develop and provide a valuable reference for CP-OLED device design through chiral dopant induction.

The construction of an artificial light-harvesting system with two-step sequential energy transfer based on supramolecular polymers

An artificial light-harvesting system with two-step sequential energy transfer was constructed in aqueous media based on cyano-substituted p-phenylenevinylene derivative (PPTA) and bis-(p-sulfonatocalix[4]arenes) (BSC4) supramolecular polymers formed through host-guest interactions, in which two different fluorescent dyes, eosin Y (EY) and sulforhodamine (SR101), were employed as energy acceptors. The obtained artificial light-harvesting system can achieve an efficient two-step energy transfer process from PPTA-BSC4 to EY and then to SR101 with high energy-transfer efficiencies of up to 36.6% and 40.8%, respectively. More importantly, the harvested energy from the PPTA-BSC4 + EY + SR101 system can be used to promote the dehalogenation of α-bromoacetophenone with a yield of 89% in aqueous solution.

Transpositional Circularly Polarized Luminescence from Transient Charge-Transfer Coassembly

Charge-transfer (CT) complexation between electron-rich and deficient aromatics has been widely applied in functional optical and photovoltaic materials. The selective complexation and spontaneous disassociation behavior of a dynamic charge-transfer coassembly possess potential in designing smart and dynamic luminescent materials, which however have not been addressed so far. In this work, the transient charge-transfer driven coassembly between π-conjugated amino acids and tetracyanobenzene, showing dynamic luminescent transition and circularly polarized luminescence (CPL) evolution property, is illustrated. Transient coassembly behaviors are independent to the diverse binding sites covering fluorene, naphthalene, and anthracene, attributed to the intramolecular CH…π interaction. Incorporation of fluorescent dyes enables a transient light harvesting process with hyperchromic CPL properties. Spontaneous green-to-red CPL transition hydrogels are also fabricated by embedding a competitive CT donor. Using a polymeric matrix treated by organic solvents, charge-transfer coassembly is immobilized with diverse circularly polarized luminescence. Such sensitive complexation shows applications in moisture-responsive luminescent materials and multiple luminescent color evolutions are realized.

Solvent-regulated chiral exciton coupling and CPL sign inversion of an amphiphilic glutamide-cyanostilbene

The chiral exciton couplings within a Y-shaped amphiphilic glutamide-cyanostilbene (GCS) could be significantly biased by solvent polarity and hydration effects, which led to sign inversion of both the circular dichroism and circularly polarized luminescence of the GCS assemblies.

Zeptomole Imaging of Cytosolic MicroRNA Cancer Biomarkers with A Light-Controlled Nanoantenna

Detecting and quantifying intracellular microRNAs (miRNAs) are a critical step in resolving a cancer diagnostic and resolving the ensemble of gene products that orchestrate the living state of cells. However, the nanoprobe for detecting low abundance miRNAs in cell cytosol is restricted by either the "one-to-one" signal-trigger model or difficulty for cytosol delivery. To address these challenges, we designed a light-harvesting nanoantenna-based nanoprobe, which directs excitation energy to a single molecule to sensitively detect cytosolic miRNA. With light irradiation, the light-harvesting nanoantenna effectively disrupted lysosomal structures by generation of reactive oxygen species, substantially achieved cytosol delivery. The nanoantenna containing > 4000 donor dyes can efficiently transfer excitation energy to one or two acceptors with 99% efficiency, leading to unprecedented signal amplification and biosensing sensitivity. The designed nanoantenna can quantify cytosolic miR-210 at zeptomolar level. The fluorescence lifetime of the donor exhibited good relationship with miR-210 concentration in the range of 0.032 to 2.97 amol/ngRNA. The zeptomole sensitivity of nanoantenna provides accurate bioimaging of miR-210 both in multiple cell lines and in vivo assay, which creates a pathway for the creation of miRNA toolbox for quantitative epigenetics and personalized medicine.

Helical donor-acceptor platinum complexes displaying dual luminescence and near-infrared circularly polarized luminescence

A series of chiral platina[5]helicenes displaying dual luminescence, i.e., fluorescence between 450 and 600 nm and red/NIR phosphorescence between 700 and 900 nm, has been synthesised, characterised and studied by first-principle calculations. This unusual behavior has been attributed to limited electronic interactions between the d orbitals of the metal and the π-orbitals of the organic ligand on the excited-state. Accordingly, the electron richness of the donor group on the helical ligand does not affect the energy of the phosphorescence process but does play a role on its efficiency. Interestingly, near-infrared circularly polarized luminescence can be obtained for the three complexes with dissymmetry factors up to 3 × 10^-3 at 750 nm.

Quantitative Förster Resonance Energy Transfer: Efficient Light Harvesting for Sequential Photo-Thermo-Electric Conversion

Light is essential to all life on the earth. Thus, highly efficient light-harvesting systems with the sequential energy transfer process are significant for using solar energy in photosynthesis. For developing an efficient light-harvesting system, a liquid aggregation-induced emission (AIE) dye TPE-EA is obtained, as a donor and solvent, which can light up the aggregation caused quenching (ACQ) Nile Red (NiR, acceptor) to construct a quantitative Förster resonance energy transfer (FRET) system in NiR⊂TPE-EA. Impressively, this FRET pair shows an impressive photothermal effect, producing a peak temperature of 119 °C while excited by UV light, with 37.8% of conversion efficiency. NiR⊂TPE-EA is quite different from most other photothermal materials, which require excitation with long wavelength light (>520 nm). Therefore, NiR⊂TPE-EA firstly converts the solar into thermal energy and then into electric energy to achieve sequential photo-thermo-electric conversion. Such sequential conversion, suitable for being excited by sunlight, is anticipated to unlock new and smart approaches for capturing solar energy.

Toward Large Dissymmetry Factor of Circularly Polarized Luminescence in Donor-Acceptor Hybrid Systems

Chiroptical materials with circularly polarized luminescence (CPL) activity have aroused a lot of interest. One essential factor for evaluating the features of CPL-active materials is the dissymmetry factor (g_lum), which represents the circular polarization of emitted light. Essentially, for the practical application of CPL, the most important issue is to greatly improve the g_lum value. Recently, benefiting from the flexible and efficient design in hybrid donor-acceptor systems, more and more examples involving g_lum value amplification have been reported. In this Perspective, we highlight the proposed mechanism for the generation and amplification of CPL in these hybrid systems. We also present the corresponding design principles and potential pitfalls in experimental processes. We hope that this Perspective can shed light on the development of highly efficient CPL-active materials.

Efficient artificial light-harvesting system constructed from supramolecular polymers with AIE property

Supramolecular luminescent materials in water have attracted much interest due to their excellent tunability, multi-color emission, and environment-friendly behavior. However, hydrophobic chromophores are often affected by poor solubility and aggregation-caused quenching effects in aqueous media. Herein, we report a water-phase artificial light-harvesting system based on an AIE-type supramolecular polymer. Specifically, dispersed nanoparticles in water were prepared from an AIE chromophore-bridged ditopic ureidopyrimidinone (M) based supramolecular polymer with the assistance of surfactants. By co-assembling the hydrophobic chromophores NDI as energy acceptor into the nanocarriers, artificial light-harvesting systems (M-NDI) could be successfully constructed, exhibiting efficient energy transfer and high antenna effects. Furthermore, the spectral emission of the system could be continuously tuned with a relatively small number of acceptors. This work develops an efficient supramolecular light-harvesting system in water, which has potential applications in dynamic luminescent materials.

Multi-Light-Responsive Upconversion-and-Downshifting-Based Circularly Polarized Luminescent Switches in Chiral Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have attracted tremendous attention for several novel applications. However, functional MOFs with light-responsive circularly polarized luminescence (CPL) are not examined in detail. Therefore, a dual CPL switch exhibiting both upconversion (UC) and downshifting (DS) CPL in the solid state is constructed by loading a luminescent diarylethene derivative (DAEC) and UC nanoparticles (UCNPs) into chiral MOFs. The chiral MOF⊃DAEC composites exhibit both photoswitchable luminescence and DS-CPL properties under alternating UV and visible light irradiation. Additionally, a reversible UC-CPL switch is realized using near-infrared (NIR) and visible light irradiation by introducing energy-level-matched UCNPs and DAEC into the chiral MOFs. The dissymmetry factor (g_lum ) of UC-CPL is noted to be significantly amplified through energy transfer compared to that of DS-CPL, which indicates that the information on circular polarization can be manipulated by altering the incident light. A chiroptical logic circuit with a 2D information output is designed with UV, visible, and NIR light as inputs by setting a rational threshold.

Natural and Artificial Chiral-Based Systems for Separation Applications

Chiral separation has attracted much attention for basic research and industrial applications in analytical chemistry. Generally, chiral separations use natural or artificial chiral-based materials as adsorbents. To improve the precision and efficiency of chiral separation, focus has shifted from natural and synthetic adsorbents to binary combinations of materials. This review specifically summarizes the significant advancements made in natural and artificial chiral adsorbents as promising candidates for diverse drug and biomolecule separation applications as well as the remaining drawbacks and challenges for research on chiral separations. The mechanisms of chiral-based recognition and separation and history and development of natural and artificial chiral-based systems are the focus of this review. Future directions in natural and artificial chiral-based systems for practical separations and other applications are also presented.

A new strategy for constructing artificial light-harvesting systems: supramolecular self-assembly gels with AIE properties

An artificial light-harvesting system (ALHS) has been designed and constructed based on supramolecular organogels made of a simple hydrazide-functionalized benzimidazole derivative (HB), as well as the fluorescent dye rhodamine B (RhB). RhB acted as a good acceptor to realize the energy-transfer process with good efficiency based on a HB/RhB assembly, which showed considerable fluorescence resonance energy transfer (FRET) efficiency of 53% for the energy transfer process. Remarkably, the obtained system showed superior color conversion abilities, converting blue light into orange light. By properly tuning the donor to acceptor ratio, bright orange light emission was achieved with a high fluorescence quantum yield of 35.5%. This system exhibited promise for applications relating to visible-light photo-transformation.