Assessing the efficiency of low-cost cleaning methods for diatoms from intertidal sediment samples

This study aims to compare the effectiveness of several low-cost reagents in obtaining high-quality diatom slides for microphytobenthos research. We evaluated the performance of eight reagents in sediment samples of beach intertidal zones. For each of the tested reagents, different pre-treatment conditions (pre-washed; non-washed) and three different temperatures (room temperature at 26 °C, 60 °C, and 100 °C) were also evaluated. For each treatment (combinations between reagents, temperatures, and pre-treatment conditions), we counted diatoms cells that met the criteria necessary for taxonomic identification (Whole/Half frustules or valves without cell material) in 30 randomly chosen fields of view in definitive preparations made from the treated samples. We also compared the treatments regarding species richness and diversity observed in the definitive preparations. The reagents influenced more the conditions of diatoms cells than the temperature and pre-treatment. H₂O₂, HNO₃, NaClO were the methods that had the best performance in relation to the number of identifiable items. The six treatments with H₂O₂ presented similar amounts of identifiable items, regardless of pre-treatment and temperature. HNO₃ presented a higher number of identifiable items in non-washed and pre-washed treatments at 60 °C and non-washed at 100 °C. NaClO had its best performance the following treatments: non-washed at room temperature and non-washed and pre-washed at 60 °C. H₂O₂ and HNO₃ also showed better results for diatom species richness and diversity, followed by NaClO. The use of H₂O₂ was more robust since it obtained good results regardless of temperature and pre-treatments and should be preferred. HNO₃ and NaClO should be used only with the appropriate temperatures, and pre-washing should be avoided.

The Direct Synthesis of Hydrogen Peroxide over AuPd Nanoparticles: An Investigation into Metal Loading

The direct synthesis of H2O2 from molecular H2 and O2 over AuPd catalysts, supported on TiO2 and prepared via an excess chloride co-impregnation procedure is investigated. The role of Au:Pd ratio on the catalytic activity towards H2O2 formation and its subsequent degradation is evaluated under conditions that have previously been found to be optimal for the formation of H2O2. The combination of relatively small nanoparticles, of mixed Pd-oxidation state is shown to correlate with enhanced catalytic performance. Subsequently, a detailed study of catalytic activity towards H2O2 synthesis as a function of AuPd loading was conducted, with a direct correlation between catalytic activity and metal loading observed.

Graphic Abstract

The Selective Oxidation of Cyclohexane via In-situ H2O2 Production Over Supported Pd-based Catalysts

The oxidation of cyclohexane via the in-situ production of H2O2 from molecular H2 and O2 offers an attractive route to the current industrial means of producing cyclohexanone and cyclohexanol (KA oil), key materials in the production of Nylon. The in-situ route has the potential to overcome the significant economic and environmental concerns associated with the use of commercial H2O2, while also allowing for the use of far lower reaction temperatures than those typical of the purely aerobic route to KA oil. Herein we demonstrate the efficacy of a series of bi-functional Pd-based catalysts, which offer appreciable concentrations of KA oil, under conditions where limited activity is observed using O2 alone. In particular the introduction of V into a supported Pd catalyst is seen to improve KA oil concentration by an order of magnitude, compared to the Pd-only analogue. In particular we ascribe this improvement in catalytic performance to the development of Pd domains of mixed oxidation state upon V incorporation as evidenced through X-ray photoelectron spectroscopy.

Graphic Abstract

Ambient base-free glycerol oxidation over bimetallic PdFe/SiO2 by in situ generated active oxygen species

Low temperature oxidation of alcohols over heterogeneous catalysts is exceptionally challenging, particularly under neutral conditions. Herein, we report on an efficient, base-free method to oxidise glycerol over a 0.5%Pd-0.5%Fe/SiO2 catalyst at ambient temperature in the presence of gaseous H2 and O2. The exceptional catalytic performance was attributed to the in situ formation of highly reactive surface-bound oxygenated species, which promote the dehydrogenation on the alcohol. The PdFe bimetallic catalyst was determined to be significantly more active than corresponding monometallic analogues, highlighting the important role both metals have in this oxidative transformation. Fe leaching was confirmed to occur over the course of the reaction but sequestering experiments, involving the addition of bare carbon to the reactions, confirmed that the reaction was predominantly heterogeneous in nature. Investigations with electron paramagnetic resonance spectroscopy suggested that the reactivity in the early stages was mediated by surface-bound reactive oxygen species; no homogeneous radical species were observed in solution. This theory was further evidenced by a direct H2O2 synthesis study, which confirmed that the presence of Fe in the bimetallic catalyst neither improved the synthesis of H2O2 nor promoted its decomposition over the PdFe/SiO2 catalyst.

The degradation of phenol via in situ H2O2 production over supported Pd-based catalysts

The oxidative degradation of phenol via in situ H2O2 production offers an attractive route to the destruction of organic contaminants in water streams, overcoming the significant concerns associated with traditional water remediation technologies.

Synergistic effect between La–Ni bimetallic oxides for the efficient decomposition of hydrogen peroxide

La–Ni bimetallic oxides with pure composition and well-crystalline structures were prepared, which showed high catalytic activities toward H₂O₂ decomposition.

Artificial Bifunctional Photozyme of Glucose Oxidase-Peroxidase for Solar-Powered Glucose-Peroxide Detection in a Biofluid with Resorcinol-Formaldehyde Polymers

Photozymes or artificial photosynthesis based on alternative natural enzymes is vital for the sustainable development of next-generation healthcare, energy, and materials science. Herein, we report resorcinol-formaldehyde (RF) resins as a solar-driven metal-free bifunctional glucose oxidase-peroxidase stand-alone photozyme for the colorimetric dual detection of hydrogen peroxide and glucose. The π-bond conjugated benzenoid-ortho/para quinoid RF polymers are efficient for glucose oxidation and hydrogen peroxide reduction with concurrent 3,3',5,5'-tetramethylbenzidine oxidation under natural sunlight. The photoinduced colorimetric process could detect H₂O₂ up to 3.5 μM at 652 nm with the linear range of 0.1-2 mM. A limit of detection of 9.2 μM was exhibited by the system while measuring glucose with a linearity from 0.2 to 8.5 mM. The formation of hydroxyl radicals (^•OH) from glucose oxidation reactions was evidenced by spin trapping electron paramagnetic resonance studies conducted herein. The results indicated that RF resins possessed strong intrinsic glucose oxidase and peroxidase (POx)-like activity under natural sunlight with promising storage and operation. This simple photozyme will definitely have potential uses in biomimetic solar-driven catalysis, bioenergy, and biomedicine.

Palladium-Based Bimetallic Nanocrystal Catalysts for the Direct Synthesis of Hydrogen Peroxide

The direct synthesis of H2 O2 from H2 and O2 is a strongly desired reaction for green processes and a promising alternative to the commercialized anthraquinone process. The design of efficient catalysts with high activity and H2 O2 selectivity is highly desirable and yet challenging. Metal dopants enhance the performance of the active phase by increasing reaction rates, stability, and/or selectivity. The identification of efficient dopants relies mostly on catalysts prepared with a random and non-uniform deposition of active and promoter phases. To study the promotional effects of metal doping on Pd catalysts, we employ colloidal, bimetallic nanocrystals (NCs) to produce catalysts in which the active and doping metals are colocalized to a fine extent. In the absence of any acid and halide promotors, PdSn and PdGa NCs supported on acid-pretreated TiO2 (PdSn/s-TiO2 , PdGa/s-TiO2 ) were highly efficient and outperformed the monometallic Pd catalyst (Pd/s-TiO2 ), whereas in the presence of an acid promotor, the overall H2 O2 productivity was also further enhanced for the Ni-, Ga-, In-, and Sn-doped catalysts with respect to Pd/s-TiO2 .

Facile Direct Seed-Mediated Growth of AuPt Bimetallic Shell on the Surface of Pd Nanocubes and Application for Direct H2O2 Synthesis

The selective enhancement of catalytic activity is a challenging task, as catalyst modification is generally accompanied by both desirable and undesirable properties. For example, in the case of the direct synthesis of hydrogen peroxide, Pt on Pd improves hydrogen conversion, but lowers hydrogen peroxide selectivity, whereas Au on Pd enhances hydrogen peroxide selectivity but decreases hydrogen conversion. Toward an ideal catalytic property, the development of a catalyst that is capable of improving H-H dissociation for increasing H2 conversion, whilst suppressing O-O dissociation for high H2O2 selectivity would be highly beneficial. Pd-core AuPt-bimetallic shell nanoparticles with a nano-sized bimetallic layer composed of Au-rich or Pt-rich content with Pd cubes were readily prepared via the direct seed-mediated growth method. In the Pd-core AuPt-bimetallic shell nanoparticles, Au was predominantly located on the {100} facets of the Pd nanocubes, whereas Pt was deposited on the corners of the Pd nanocubes. The evaluation of Pd-core AuPt-bimetallic shell nanoparticles with varying Au and Pt contents revealed that Pd-core AuPt-bimetallic shell that was composed of 2.5 mol% Au and 5 mol% Pt, in relation to Pd, exhibited the highest H2O2 production rate (914 mmol H2O2 gmetal−1 h−1), due to the improvement of both H2O2 selectivity and H2 conversion.

Synthesis of Pd-M@HCS(M = Co, Ni, Cu) Bimetallic Catalysts and Their Catalytic Performance for Direct Synthesis of H2O2

Hydrogen peroxide (H2O2), as a clean and green oxidant, is widely used in many fields. The direct synthesis of H2O2 (DSHP) from H2 and O2 has attracted most research interest because it relates to a facile, environmentally friendly, and economic process. Yolk–shell Pd-M@HCS (hollow carbon sphere) (M = Co, Ni, Cu) nanocatalysts, in which the bimetal nanoparticle is the core and porous carbon works as the shell layer, are reported in this work. It was found that catalytic activities were enhanced because of the introduced M metals. Additionally, the different mass ratios of Pd to Co (mPd/mCo) were further investigated to improve the catalytic performance for the DSHP. When mPd/mCo was 4.4, the prepared Pd-Co@HCS-(4.4) catalyst, with an average Pd nanoparticle size of 7.30 nm, provided the highest H2O2 selectivity of 87% and H2O2 productivity of 1996 mmolgPd−1·h−1, which were increased by 24% and 253%, respectively, compared to Pd@HCS.

Tailored Palladium-Platinum Nanoconcave Cubes as High Performance Catalysts for the Direct Synthesis of Hydrogen Peroxide

To obtain high catalytic properties, finely modulating the electronic structure and active sites of catalysts is important. Herein, we report the design and economical synthesis of Pd@Pt core-shell nanoparticles for high productivity in the direct synthesis of hydrogen peroxide. Pd@Pt core-shell nanoparticles with a partially covered Pt shell on a Pd cube were synthesized using a simple direct seed-mediated growth method. The synthesized Pd@Pt core-shell nanoparticles were composed of high index faceted Pt on the corners and edges, while the Pd-Pt alloy was located on the terrace area of the Pd cubes. Because of the high-indexed Pt and Pd-Pt alloy sites, the synthesized concave Pd@Pt₇ nanoparticles exhibited both high H₂ conversion and H₂O₂ selectivity compared with Pd cubes.

The direct synthesis of hydrogen peroxide from H2 and O2 using Pd–Ga and Pd–In catalysts

The direct synthesis of hydrogen peroxide is investigated using PdGa/TiO₂ and PdIn/TiO₂ catalysts prepared by an acid-washed sol-immobilisation procedure, which allows for enhanced catalytic selectivity.

The direct synthesis of hydrogen peroxide using a combination of a hydrophobic solvent and water

The use of a hydrophobic solvent in combination with water leads to significant suppression of H₂O₂ degradation pathways over a AuPd/C catalyst.

Shining light on the solid–liquid interface: in situ/operando monitoring of surface catalysis

Many industrially important chemical transformations occur at the interface between a solid catalyst and liquid reactants. In situ and operando spectroscopies offer unique insight into the reactivity of such catalytically active solid–liquid interfaces.

Direct electrosynthesis of pure aqueous H2O2 solutions up to 20% by weight using a solid electrolyte

Hydrogen peroxide (H2O2) synthesis generally requires substantial postreaction purification. Here, we report a direct electrosynthesis strategy that delivers separate hydrogen (H2) and oxygen (O2) streams to an anode and cathode separated by a porous solid electrolyte, wherein the electrochemically generated H+ and HO2– recombine to form pure aqueous H2O2 solutions. By optimizing a functionalized carbon black catalyst for two-electron oxygen reduction, we achieved >90% selectivity for pure H2O2 at current densities up to 200 milliamperes per square centimeter, which represents an H2O2 productivity of 3.4 millimoles per square centimeter per hour (3660 moles per kilogram of catalyst per hour). A wide range of concentrations of pure H2O2 solutions up to 20 weight % could be obtained by tuning the water flow rate through the solid electrolyte, and the catalyst retained activity and selectivity for 100 hours.

Resonant-XRD Characterization of Nanoalloyed Au-Pd Catalysts for the Direct Synthesis of H2O2: Quantitative Analysis of Size Dependent Composition of the Nanoparticles †

The focus of this work is on the relationship between the quantitative structural characterization of bimetallic Au-Pd nanoparticles dispersed in an amorphous polymer matrix and their catalytic activity in the direct synthesis of hydrogen peroxide (DS reaction). Resonant X-ray powder diffraction with synchrotron radiation was employed to probe selectively and to reveal fine details of the structure of bimetallic nanoparticles embedded in the support. The semi-quantitative analysis of the resonant X-ray powdered diffraction data, made on a large number of metal nanoparticles, shows that in one of the polymer-supported Au-Pd catalyst for the DS reaction (P75) featured by an overall molar Pd/Au of about 5.54, the smallest metal nanoparticles (MNPs), which account for more than 99.9% of the total MNPs number and for more than 95% of the metal surface, are formed by practically pure palladium. The relative number of bimetallic alloyed nanoparticles is very small (less than 4 × 102 ppm) and they contribute to only about 2% of the total metal surface. In a second gold-enriched catalyst (P50) with an overall molar Pd/Au of 1.84, the proportion of the bimetallic alloyed nanoparticles increased to about 97% and they account for about 99% of the metal surface. As a result of the metal intermixing, the catalytic productivity for the DS reaction increased from 97 to 109 mmolH2O2/molH2, owing to the gold-promotion of palladium.

A Comparative Study of the Catalytic Behaviour of Alkoxy-1,3,5-Triazapentadiene Copper(II) Complexes in Cyclohexane Oxidation

The mononuclear copper complexes [Cu{NH=C(OR)NC(OR)=NH}2] with alkoxy-1,3,5-triazapentadiene ligands that have different substituents (R = Me (1), Et (2), nPr (3), iPr (4), CH2CH2OCH3 (5)) were prepared, characterized (including the single crystal X-ray analysis of 3) and studied as catalysts in the mild oxidation of alkanes with H2O2 as an oxidant, pyridine as a promoting agent and cyclohexane as a main model substrate. The complex 4 showed the highest activity with a yield of products up to 18.5% and turnover frequency (TOF) up to 41 h−1. Cyclohexyl hydroperoxide was the main reaction product in all cases. Selectivity parameters in the oxidation of substituted cyclohexanes and adamantane disclosed a dominant free radical reaction mechanism with hydroxyl radicals as C–H-attacking species. The main overoxidation product was 6-hydroxyhexanoic acid, suggesting the presence of a secondary reaction mechanism of a different type. All complexes undergo gradual alteration of their structures in acetonitrile solutions to produce catalytically-active intermediates, as evidenced by UV/Vis spectroscopy and kinetic studies. Complex 4, having tertiary C–H bonds in its iPr substituents, showed the fastest alteration rate, which can be significantly suppressed by using the CD3CN solvent instead of CH3CN one. The observed process was associated to an autocatalytic oxidation of the alkoxy-1,3,5-triazapentadiene ligand. The deuterated complex 4-d32 was prepared and showed higher stability under the same conditions. The complexes 1 and 4 showed different reactivity in the formation of H218O from 18O2 in acetonitrile solutions.

Looking for the “Dream Catalyst” for Hydrogen Peroxide Production from Hydrogen and Oxygen

The reaction between hydrogen and oxygen is in principle the simplest method to form hydrogen peroxide, but it is still a “dream process”, thus needing a “dream catalyst”. The aim of this review is to analyze critically the different heterogeneous catalysts used for the direct synthesis of H2O2 trying to determine the features that the ideal or “dream catalyst” should possess. This analysis will refer specifically to the following points: (i) the choice of the metal; (ii) the metal promoters used to improve the activity and/or the selectivity; (iii) the role of different supports and their acidic properties; (iv) the addition of halide promoters to inhibit undesired side reactions; (v) the addition of other promoters; (vi) the effects of particle morphology; and (vii) the effects of different synthetic methods on catalyst morphology and performance.