A novel gradient current density output mode for effective electrochemical oxidative degradation of dye wastewater by boron-doped diamond (BDD) anode

In order to solve the problems of high energy consumption and low current efficiency in electrochemical oxidation (EO) degradation under the traditional constant output process (COP), a gradient output process (GOP) of current density is proposed in this paper. That is, the current density is gradually reduced in a fixed degradation time, and the Reactive Blue 19 simulated dye wastewater was used as the degradation target. The general applicability of the process was further confirmed by studying the optimal gradient current density output parameters, the dye concentration, electrolyte concentration and other dye compounds with different molecular structures. The corresponding results show that the chemical oxygen demand (COD) removal (78%) and the color removal (100%) under the GOP are similar to those in the COP, and the overall energy consumption is reduced by about 50% compared with that in the traditional constant current mode. Moreover, the current efficiency in the middle and late stages of EO process has increased by 8.6 times compared with COP.

Ecotoxicological Evaluation of Methiocarb Electrochemical Oxidation

The ecotoxicity of methiocarb aqueous solutions treated by electrochemical oxidation was evaluated utilizing the model organism Daphnia magna. The electrodegradation experiments were performed using a boron-doped diamond anode and the influence of the applied current density and the supporting electrolyte (NaCl or Na2SO4) on methiocarb degradation and toxicity reduction were assessed. Electrooxidation treatment presented a remarkable efficiency in methiocarb complete degradation and a high potential for reducing the undesirable ecological effects of this priority substance. The reaction rate followed first-order kinetics in both electrolytes, being more favorable in a chloride medium. In fact, the presence of chloride increased the methiocarb removal rate and toxicity reduction and favored nitrogen removal. A 200× reduction in the acute toxicity towards D. magna, from 370.9 to 1.6 toxic units, was observed for the solutions prepared with NaCl after 5 h treatment at 100 A m−2. An increase in the applied current density led to an increase in toxicity towards D. magna of the treated solutions. At optimized experimental conditions, electrooxidation offers a suitable solution for the treatment and elimination of undesirable ecological effects of methiocarb contaminated industrial or agricultural wastewaters, ensuring that this highly hazardous pesticide is not transferred to the aquatic environment.

Cathodic hydrogen production by simultaneous oxidation of methyl red and 2,4-dichlorophenoxyacetate aqueous solutions using Pb/PbO2, Ti/Sb-doped SnO2 and Si/BDD anodes. Part 1: electrochemical oxidation

In this work, the electrochemical oxidation of the Methyl Red (MR) dye and the herbicide sodium 2,4-dichlorophenoxyacetate (2,4-DNa) was investigated on Si/BDD, Pb/PbO2 and Ti/Sb-doped SnO2 anodes in aqueous acidic medium by applying 30 mA cm-2 at 298 K. The electrochemical experiments were carried out in a two-compartment electrochemical cell separated through a Nafion® membrane (417 type) in order to use two types of supporting electrolyte to measure the elimination of the organic compound, the hydrogen production and the amount of oxygen produced during the oxidation of the pollutants. Although the main goal of this study is to understand the relationship between both processes, the evaluation of the current efficiencies (η) is a key parameter to determine the anodic oxidative capacity to degrade the proposed pollutants. The results clearly showed that MR and 2,4-DNa can be oxidized on Si/BDD, Pb/PbO2 and Ti/Sb-doped SnO2 anodes; however, significant variations in the oxidation level and η are achieved. Thus, although the MR solutions were completely discolored in all cases, only on the Si/BDD anode was MR oxidized to carboxylic acids in less than 15 min of electrolysis time. On Pb/PbO2 and Ti/Sb-doped SnO2 electrodes, the discoloration was slower and the oxidation was quasi-completed, leaving in solution some organic by-products, such as 2-aminobenzoic acid and/or N,N'-dimethyl-p-phenylenediamine, in the fixed electrolysis time. The behavior observed during the elimination of 2,4-DNa is due to its difficulty in degrading the chlorine groups in its aromatic ring which makes 2,4-DNa a more stable molecule. In the first oxidation stage, 2,4-dichlorophenol (2,4-DP) is produced in all cases, but on Si/BDD, this intermediate is quickly consumed. From the polarization curves and Tafel analysis, a reaction scheme for the formation and consumption of 2,4-DP was proposed.

Coupling of Anodic Oxidation and Soil Remediation Processes: A Review

In recent years, due to industrial modernization and agricultural mechanization, several environmental consequences have been observed, which make sustainable development difficult. Soil, as an important component of ecosystem and a key resource for the survival of human and animals, has been under constant contamination from different human activities. Contaminated soils and sites require remediation not only because of the hazardous threat it possess to the environment but also due to the shortage of fresh land for both agriculture and urbanization. Combined or coupled remediation technologies are one of the efficient processes for the treatment of contaminated soils. In these technologies, two or more soil remediation techniques are applied simultaneously or sequentially, in which one technique complements the other, making the treatment very efficient. Coupling anodic oxidation (AO) and soil remediation for the treatment of soil contaminated with organics has been studied via two configurations: (i) soil remediation, ex situ AO, where AO is used as a post-treatment stage for the treatment of effluents from soil remediation process and (ii) soil remediation, in situ AO, where both processes are applied simultaneously. The former is the most widely investigated configuration of the combined processes, while the latter is less common due to the greater diffusion dependency of AO as an electrode process. In this review, the concept of soil washing (SW)/soil flushing (SF) and electrokinetic as soil remediation techniques are briefly explained followed by a discussion of different configurations of combined AO and soil remediation.

Biodegradability improvement of clopyralid wastes through electrolysis using different diamond anodes

The use of boron-doped (BDDs) anodes for efficient removal of complex organic molecules, such as organochlorine compounds, is well stated in the literature. However, the role of the different characteristics of this anode on the transformation of these type of contaminants into more biodegradable molecules is a topic of interest that need to be clarified when aimed an efficient combination of an electrochemical system as a previous step to biological treatment. In this work, improvement in the biodegradability of synthetic wastes polluted with clopyralid, as an organochlorine model compound, is studied after electrolysis with different BDDs in the presence of the two most common supporting electrolytes (containing sulfate or chloride ions). For that, clopyralid removal, mineralization, aromatics intermediates, short-chain carboxylic acids, and inorganic ions were monitored. Improved results were found in sulfate media for BDD with 200 ppm, capable of removing 88.7% of contaminants and 85% of TOC, resulting in an improvement in biodegradability of almost 7-fold compared to the initial sample. These findings point out that lower doping levels are preferable when coupling studied technologies.

Electrochemical Oxidation of Sulfonamides with Boron-Doped Diamond and Pt Anodes

Electrochemical oxidation processes usually favored specific degradation pathways depending on anode materials. In this work, a series of sulfonamides (SNs) were degraded by electrochemical oxidation. Compared to Pt anodes (0.1567–0.1795 h⁻¹), degradation rates of SNs were much higher at boron‐doped diamond (BDD) anodes (2.4290–13.1950 h⁻¹). However, the same intermediates were detected in the two anode systems. Due to the strong oxidizing ability of BDD anodes, a large amount of intermediates with high toxicities were initially generated and then finally reduced in the BDD anode systems, while the amount of intermediates continuously increased in the Pt anode systems. Additionally, SNs were degraded faster in Na₂SO₄ than NaH₂PO₄ electrolytes at BDD anodes, while they were similar at Pt anodes. This study demonstrated that the degradation pathways of SNs at BDD and Pt anodes were similar, but the evolutions of intermediate amounts and toxicities were different due to their varied oxidizing abilities.