Variations in slice shape and absorption as artifacts in the determination of tissue parameters in NMR imaging

Cardiac T1 calculations from MR spin-echo images

Normally, cardiac triggering in MR spin-echo imaging restricts repetition times (TR) to integral values of the cardiac period (TC), and introduces irregularities in TR due to variations in TC. We have investigated how much these restrictions decrease the accuracy and precision of spin-lattice relaxation (T1) values of the myocardium calculated from two cardiac-triggered spin-echo images. By introducing additional excitation pulses, TR can effectively be reduced to a fractional value of TC and considerable improvement in T1 precision is possible. For TC = 800 ms, the improvement in T1 precision is 30% when two spin-echo images of TR = 1/2 X TC and TR = 2 X TC are used to calculate T1 instead of two images with TR = TC and TR = 2 X TC. The irregularities in TR decrease both T1 precision and accuracy. Irregularities of the order of 15% in a mean TR of 800 ms produce a fourfold decrease in precision. Since irregularities in TC easily exceed 15%, MRI data should be acquired when individual TR values are approximately within +/- 15% of the subject's mean TC.

Rapid Fourier imaging using steady-state free precession

Reversal of the read gradient in a SSFP imaging experiment allows a full spin echo to be collected in the interval tau between successive rf pulses. Orthogonal gradient pulses are used to dephase and subsequently rephase the transverse magnetization each tau enabling 2D or 3D Fourier techniques. The minimum data collection time per slice in the 3D technique is 3.1 s (128 X 256). For a 2D data collection, an oscillating bipolar sawtooth gradient is used to select the slice. Each phase-encode value must be averaged over an equivalent portion of the oscillating slice-selection gradient and this condition gives a minimum of 25 s for 2D data collection. Excellent slice selection is achieved with less than 5% of the signal lying outside the slice profile central lobe. Images at 0.14 T show tissue contrast may be manipulated by changing the rf pulse angle, an example of which is the presence or absence of gray/white matter contrast at rf pulse angles of 30 and 90 degrees, respectively. The pulse angle theta dependence of five samples with different values of T2/T1 was measured and numerically calculated with good agreement between theory and experiment for theta less than or equal to 90 degrees.

Errors in T2 estimation using multislice multiple-echo imaging

Accurate T2 images calculated from multiple-echo sequences are difficult to obtain over a number of contiguous slices due to the presence of unwanted echoes that are generated at the slice edges. This problem is similar to problems encountered in single-slice imaging in the presence of rf pulse imperfections. In this paper, we use computer simulations to show that all unwanted echoes can be eliminated by defocusing them using additions to the slice-selection gradients. Accurate T2 images may then be calculated from the remaining echoes. We also present a method of experimentally displaying the slice shapes of unwanted echoes generated by a multislice imaging sequence.

Flow measurement by the development of phase differences during slice formation in MR imaging

A method for measuring flow based on the shifting of the rephasing pulse following slice selection in partial saturation is described. The technique is based on a partial saturation sequence and retains much of the high signal which is a feature of the use of this sequence. Images obtained while encoding for the flow signal compated with those when not encoding appear very similar.