Artificial spores: cytocompatible encapsulation of individual living cells within thin, tough artificial shells

Metal-Organic Framework Coatings as Cytoprotective Exoskeletons for Living Cells

The biomimetic mineralization of metal-organic framework (MOF) material on living cells is reported. ZIF-8 can be crystallized on a living cell surface as an exoskeleton that offers physical protection while allowing transport of essential nutrients, thus maintaining cell viability. The MOF shell prevents cell division, leading to an artificially induced pseudo-hibernation state. Cellular functions can be fully restored upon MOF removal.

Silica sol-gel encapsulated methylotrophic yeast as filling of biofilters for the removal of methanol from industrial wastewater

This research suggests the use of new hybrid biomaterials based on methylotrophic yeast cells covered by an alkyl-modified silica shell as biocatalysts. The hybrid biomaterials are produced by sol-gel chemistry from silane precursors. The shell protects microbial cells from harmful effects of acidic environment. Potential use of the hybrid biomaterials based on methylotrophic yeast Ogataea polymorpha VKM Y-2559 encapsulated into alkyl-modified silica matrix for biofilters is represented for the first time. Organo-silica shells covering yeast cells effectively protect them from exposure to harmful factors, including extreme values of pH. The biofilter based on the organic silica matrix encapsulated in the methylotrophic yeast Ogataea polymorpha BKM Y-2559 has an oxidizing power of 3 times more than the capacity of the aeration tanks used at the chemical plants during methyl alcohol production. This may lead to the development of new and effective industrial wastewater treatment technologies.

Cell-in-Shell Hybrids: Chemical Nanoencapsulation of Individual Cells

Nature has developed a fascinating strategy of cryptobiosis ("secret life") for counteracting the stressful, and often lethal, environmental conditions that fluctuate sporadically over time. For example, certain bacteria sporulate to transform from a metabolically active, vegetative state to an ametabolic endospore state. The bacterial endospores, encased within tough biomolecular shells, withstand the extremes of harmful stressors, such as radiation, desiccation, and malnutrition, for extended periods of time and return to a vegetative state by breaking their protective shells apart when their environment becomes hospitable for living. Certain ciliates and even higher organisms, for example, tardigrades, and others are also found to adopt a cryptobiotic strategy for survival. A common feature of cryptobiosis is the structural presence of tough sheaths on cellular structures. However, most cells and cellular assemblies are not "spore-forming" and are vulnerable to the outside threats. In particular, mammalian cells, enclosed with labile lipid bilayers, are highly susceptible to in vitro conditions in the laboratory and daily life settings, making manipulation and preservation difficult outside of specialized conditions. The instability of living cells has been a main bottleneck to the advanced development of cell-based applications, such as cell therapy and cell-based sensors. A judicious question arises: can cellular tolerance against harmful stresses be enhanced by simply forming cell-in-shell hybrid structures? Experimental results suggest that the answer is yes. A micrometer-sized "Iron Man" can be generated by chemically forming an ultrathin (<100 nm) but durable shell on a "non-spore-forming" cell. Since the report on silica nanoencapsulation of yeast cells, in which cytoprotective yeast-in-silica hybrids were formed, several synthetic strategies have been developed to encapsulate individual cells in a cytocompatible fashion, mimicking the cryptobiotic cell-in-shell structures found in nature, for example, bacterial endospores. Bioinspired silicification and phenolics-based coatings are, so far, the main approaches to the formation of cytoprotective cell-in-shell hybrids, because they ensure cell viability during encapsulations and also generate durable nanoshells on cell surfaces. The resulting cell-in-shell hybrids extrinsically possess enhanced resistance to external aggressors, and more intriguingly, the encapsulation alters their metabolic activity, exemplified by retarded or suppressed cell cycle progression. In addition, recent developments in the field have further advanced the synthetic tools available to the stage of chemical sporulation and germination of mammalian cells, where cytoprotective shells are formed on labile mammalian cells and broken apart on demand. For example, individual HeLa cells are coated with a metal-organic complex of ferric ion and tannic acid, and cellular adherence and proliferation are controlled by the programmed shell formation and degradation. Based on these demonstrations, the (degradable) cell-in-shell hybrids are anticipated to find their applications in various biomedical and bionanotechnological areas, such as cytotherapeutics, high-throughput screening, sensors, and biocatalysis, as well as providing a versatile research platform for single-cell biology.

A degradable polydopamine coating based on disulfide-exchange reaction

Although the programmed degradation of biocompatible films finds applications in various fields including biomedical and bionanotechnological areas, coating methods have generally been limited to be substrate-specific, not applicable to any kinds of substrates. In this paper, we report a dopamine derivative, which allows for both universal coating of various substrates and stimuli-responsive film degradation, inspired by mussel-adhesive proteins. Two dopamine moieties are linked together by the disulfide bond, the cleavage of which enables the programmed film degradation. Mechanistic analysis of the degradable films indicates that the initial cleavage of the disulfide linkage causes rapid uptake of water molecules, hydrating the films, which leads to rapid degradation. Our substrate-independent coating of degradable films provides an advanced tool for drug delivery systems, tissue engineering, and anti-fouling strategies.

Chemical sporulation and germination: cytoprotective nanocoating of individual mammalian cells with a degradable tannic acid-FeIII complex

Individual mammalian cells were coated with cytoprotective and degradable films by cytocompatible processes maintaining the cell viability. Three types of mammalian cells (HeLa, NIH 3T3, and Jurkat cells) were coated with a metal-organic complex of tannic acid (TA) and ferric ion, and the TA-Fe(III) nanocoat effectively protected the coated mammalian cells against UV-C irradiation and a toxic compound. More importantly, the cell proliferation was controlled by programmed formation and degradation of the TA-Fe(III) nanocoat, mimicking the sporulation and germination processes found in nature.

Fiber-Optic Chemical Sensors and Fiber-Optic Bio-Sensors

This review summarizes principles and current stage of development of fiber-optic chemical sensors (FOCS) and biosensors (FOBS). Fiber optic sensor (FOS) systems use the ability of optical fibers (OF) to guide the light in the spectral range from ultraviolet (UV) (180 nm) up to middle infrared (IR) (10 μm) and modulation of guided light by the parameters of the surrounding environment of the OF core. The introduction of OF in the sensor systems has brought advantages such as measurement in flammable and explosive environments, immunity to electrical noises, miniaturization, geometrical flexibility, measurement of small sample volumes, remote sensing in inaccessible sites or harsh environments and multi-sensing. The review comprises briefly the theory of OF elaborated for sensors, techniques of fabrications and analytical results reached with fiber-optic chemical and biological sensors.

Improving cell-based therapies by nanomodification

Cell-based therapies are emerging as a promising approach for various diseases. Their therapeutic efficacy depends on rational control and regulation of the functions and behaviors of cells during their treatments. Different from conventional regulatory strategy by chemical adjuvants or genetic engineering, which is restricted by limited synergistic regulatory efficiency or uncertain safety problems, a novel approach based on nanoscale artificial materials can be applied to modify living cells to endow them with novel functions and unique properties. Inspired by natural "nano shell" and "nano compass" structures, cell nanomodification can be developed through both external and internal pathways. In this review, some novel cell surface engineering and intracellular nanoconjugation strategies are summarized. Their potential applications are also discussed, including cell protection, cell labeling, targeted delivery and in situ regulation. It is believed that these novel cell-material complexes can have great potentials for biomedical applications.

Protein retention on plasma-treated hierarchical nanoscale gold-silver platform

Dense arrays of gold-supported silver nanowires of about 100 nm in diameter grown directly in the channels of nanoporous aluminium oxide membrane were fabricated and tested as a novel platform for the immobilization and retention of BSA proteins in the microbial-protective environments. Additional treatment of the silver nanowires using low-temperature plasmas in the inductively-coupled plasma reactor and an atmospheric-pressure plasma jet have demonstrated that the morphology of the nanowire array can be controlled and the amount of the retained protein may be increased due to the plasma effect. A combination of the neutral gold sublayer with the antimicrobial properties of silver nanowires could significantly enhance the efficiency of the platforms used in various biotechnological processes.

Plasma treatment for next-generation nanobiointerfaces

Energy deficiency, global poverty, chronic hunger, chronic diseases, and environment conservation are among the major problems threatening the whole mankind. Nanostructure-based technologies could be a possible solution. Such techniques are now used for the production of many vitally important products including cultured and fermented food, antibiotics, various medicines, and biofuels. On the other hand, the nanostructure-based technologies still demonstrate low efficiency and controllability, and thus still are not capable to decisively address the global problems. Furthermore, future technologies should ensure lowest possible environmental impact by implementing green production principles. One of the most promising approaches to address these challenges are the sophisticatedly engineered biointerfaces. Here, the authors briefly evaluate the potential of the plasma-based techniques for the fabrication of complex biointerfaces. The authors consider mainly the atmospheric and inductively coupled plasma environments and show several examples of the artificial plasma-created biointerfaces, which can be used for the biotechnological and medical processes, as well as for the drug delivery devices, fluidised bed bioreactors, catalytic reactors, and others. A special attention is paid to the plasma-based treatment and processing of the biointerfaces formed by arrays of carbon nanotubes and graphene flakes.

Cytocompatible in situ cross-linking of degradable LbL films based on thiol-exchange reaction

Formation of both mechanically durable and programmably degradable layer-by-layer (LbL) films in a biocompatible fashion has potential applications in cell therapy, tissue engineering, and drug-delivery systems, where the films are interfaced with living cells. In this work, we developed a simple but versatile method for generating in situ cross-linked and responsively degradable LbL films, based on the thiol-exchange reaction, under highly cytocompatible conditions (aqueous solution at pH 7.4 and room temperature). The cytocompatibility of the processes was confirmed by coating individual yeast cells with the cross-linked LbL films and breaking the films on demand, while maintaining the cell viability. In addition, the processes were applied to the controlled release of an anticancer drug in the HeLa cells.

Organic/inorganic double-layered shells for multiple cytoprotection of individual living cells

The cytoprotection of individual living cells under in vitro and daily-life conditions is a prerequisite for various cell-based applications including cell therapy, cell-based sensors, regenerative medicine, and even the food industry. In this work, we use a cytocompatible two-step process to encapsulate Saccharomyces cerevisiae in a highly uniform nanometric (<100 nm) shell composed of organic poly(norepinephrine) and inorganic silica layers. The resulting cell-in-shell structure acquires multiple resistance against lytic enzyme, desiccation, and UV-C irradiation. In addition to the UV-C filtering effect of the double-layered shell, the biochemical responses of the encapsulated yeast are suggested to contribute to the observed UV-C tolerance. This work offers a chemical tool for cytoprotecting individual living cells under multiple stresses and also for studying biochemical behavior at the cellular level.

Peptide-catalyzed, bioinspired silicification for single-cell encapsulation in the imidazole-buffered system

Cytoprotective silica encapsulation of individual yeast cells is achieved by a peptide-catalyzed silicification under mild conditions, inspired by glass sponges.

On-Cell Surface Cross-Linking of Polymer Molecules by Horseradish Peroxidase Anchored to Cell Membrane for Individual Cell Encapsulation in Hydrogel Sheath

Hydrogel sheaths were fabricated on the surfaces of individual mammalian cells through the cross-linking of polymer molecules catalyzed by horseradish peroxidase (HRP) in aqueous solution. For confining the progress of the cross-linking only on the cell surface, HRP was anchored to the cell membrane by soaking the cells in the solution containing the HRP conjugated with a biocompatible anchor molecule for cell membrane. The hydrogel sheath of about 1 μm thickness was obtained by soaking the cells with the anchored HRP in aqueous solution containing polymers possessing phenolic hydroxyl (Ph) moieties and H₂O₂ for 10 min. The hydrogel sheaths could be made from a variety of polymers possessing Ph moieties, for example, derivatives of polysaccharide, protein, and synthetic polymer. Cytocompatibility of the on-cell surface enzymatic hydrogel sheath formation was confirmed from the viability of the enclosed cells (>90%) and subsequent normal growth after removal of the hydrogel sheath.

Mesosilica-coated ultrafine fibers for highly efficient laccase encapsulation

In this paper, we present a simple but efficient biomimetic method to encapsulate laccase on mesoporous silica-modified electrospun (ES) ultrafine fibers. Because of the mild immobilization conditions (room temperature, aqueous condition), the encapsulated laccase retained a high activity of 94%. Because of the protection from the silica layer, the laccase worked efficiently at 60 °C and retained a long-term activity in the presence of proteinase K. After recycling for 10 times the laccase still preserved 96% of its original reactivity. More remarkably, the immobilized laccase on fibers could completely recover its activity after thermal denature, while the free laccase permanently lost the activity. We also demonstrated that the laccase on silica-coated fibers exhibited an enhanced decolorization capability of Brilliant Blue KN-R (BBKN-R) as compared to the free laccase, showing its great potential for industrial applications.

Nanocoating of single cells: from maintenance of cell viability to manipulation of cellular activities

The chronological progresses in single-cell nanocoating are described. The historical developments in the field are divided into biotemplating, cytocompatible nanocoating, and cells in nano-nutshells, depending on the main research focuses. Each subfield is discussed in conjunction with the others, regarding how and why to manipulate living cells by nanocoating at the single-cell level.

Bio-inspired encapsulation and functionalization of living cells with artificial shells

In nature, most single cells do not have structured shells to provide extensive protection apart from diatoms and radiolarians. Fabrication of biomimetic structures based on living cells encapsulated with artificial shells has a great impact on the area of cell-based sensors and devices as well as fundamental studies in cell biology. The past decade has witnessed a rapid increase of research concerning the new fabrication strategies, functionalization and applications of this kind of encapsulated cells. In this review, the latest fabrication strategies on how to encapsulate living cells with functional shells based on the diversity of artificial shells are discussed: hydrogel matrix shells, sol-gel shells, polymeric shells, and induced mineral shells. Classical different types of artificial shells are introduced and their advantages and disadvantages are compared and explained. The biomedical applications of encapsulated cells with particular emphasis on cell implant protection, cell separation, biosensors, cell therapy and tissue engineering are also described and a recap of this review and the future perspectives on these active areas is given finally.

Artificial spores: cytoprotective nanoencapsulation of living cells

In this Opinion we discuss the development of artificial spores and their maturation as an independent field of research. The robust cell-in-shell structures have displayed unprecedented characteristics, which include the retardation of cell division and extensive cytoprotective capabilities that encompass exposure to osmotic pressure, shear force, heat, UV radiation, and lytic enzymes. Additionally, the nanothin shells act as highly versatile scaffolds for chemical functionalization to equip cells for implementation in tissue engineering, biosensors, cell therapy, or other biotechnological applications. We also explore the future direction of this emerging field and dictate that the next phase of research should focus on attaining more intricate engineering to achieve stimulus-responsive shell-degradation, multilayer casings with orthogonal functions, and the encapsulation of multiple cells for multicellular artificial spores.