Recent Progress in Time-Resolved Biosensing and Bioimaging Based on Lanthanide-Doped Nanoparticles

Lab-on-Microsphere-FRET-Based Multiplex Sensor Platform

Here we report on the development and investigation of a novel multiplex assay model based on polymer microspheres (PMS) encoded with ternary AIS/ZnS quantum dots (QDs). The system was prepared via layer-by-layer deposition technique. Our studies of Förster resonance energy transfer (FRET) between the QD-encoded microspheres and two different cyanine dyes have demonstrated that the QD photoluminescence (PL) quenching steadily increases with a decrease in the QD-dye distance. We have found that the sensitized dye PL intensity demonstrates a clear maximum at two double layers of polyelectrolytes between QDs and Dye molecules on the polymer microspheres. Time resolved PL measurements have shown that the PL lifetime decreases for the QDs and increases for the dyes due to FRET. The designed system makes it possible to record spectrally different bands of FRET-induced dye luminescence with different decay times and thereby allows for the multiplexing by wavelength and photoluminescence lifetimes of the dyes. We believe that PMS encoded with AIS/ZnS QDs have great potential for the development of new highly selective and sensitive sensor systems for multiplex analysis to detect cell lysates and body fluids' representative biomarkers.

A cerium-based fluorescent nanosensor for highly specific detection of glutathione over cysteine and homocysteine

Ever-increasing attention has been focused on constructing a sensing system for specific detection of glutathione (GSH) over cysteine (Cys) and homocysteine (Hcy), which usually interfere with the GSH detection due to their similar structures and the presence of thiol groups in these amino acids. Here, a novel fluorescence-sensing system is developed for highly specific GSH detection over Cys and Hcy. The sensing system is constructed through facilely mixing dipicolinic acid (DPA) and guanosine 5'-monophosphate (GMP) with cerium acetate at ambient conditions, denoted as DPA-Ce-GMP. The resultant DPA-Ce-GMP possesses fluorescence emission with excellent thermal stability and anti-light bleaching, which can be quenched by copper ions (Cu2+). The GSH, and not Cys or Hcy, can trap Cu2+ from DPA-Ce-GMP, resulting in the restoration of the fluorescence of the sensing system. The limit of detection reaches as low as 7.1 nM. The GSH detection in a real sample of human serum was further explored and exhibits satisfactory recovery. The developed sensing system has the advantages of ease-of-preparation, excellent selectivity and stability, demonstrating its potential application in disease diagnosis in the future.

Local-structure-dependent luminescence in lanthanide-doped inorganic nanocrystals for biological applications

This feature article overviews the recent advances in the local-structure-dependent luminescence in lanthanide-doped inorganic nanocrystals for various biological applications.

Synthesis and Biomedical Applications of Lanthanides-Doped Persistent Luminescence Phosphors With NIR Emissions

Persistent luminescence phosphors (PLPs) are largely used in biomedical areas owing to their unique advantages in reducing the autofluorescence and light-scattering interference from tissues. Moreover, PLPs with long-lived luminescence in the near-infrared (NIR) region are able to be applied in deep-tissue bioimaging or therapy due to the reduced light absorption of tissues in NIR region. Because of their abundant election levels and energy transfer channels, lanthanides are widely doped in PLPs for the generation of NIR persistent emissions. In addition, the crystal defects introduced by lanthanides-doping can serves as charge traps in PLPs, which contributes to the enhancement of persistent luminescence intensity and the increase of persistent time. In this paper, the research progress in the synthesis and biomedical applications of lanthanides-doped PLPs with NIR emissions are systematically summarized, which can provide instructions for the design and applications of PLPs in the future.

Coloring Afterglow Nanoparticles for High-Contrast Time-Gating-Free Multiplex Luminescence Imaging

Afterglow nanoparticles (AGNPs) possessing inherently long lifetime with tailorable emission colors and uniform size have long been sought due to their time-gating-free high-contrast multiplexing imaging. Herein, via a straightforward template method, it is reported that such multicolor AGNPs can be accomplished. The resultant AGNPs exhibit a series of tunable afterglow emissions, including blue, yellow, green, and white. These multicolor AGNPs are found to be highly bright, enabling them to perform high-contrast multichannel afterglow imaging in vitro and in vivo without the use of any complicated time-gating algorithms or systems, which existing tools are unable to do.

Accurate In Vivo Nanothermometry through NIR-II Lanthanide Luminescence Lifetime

Luminescence nanothermometry is promising for noninvasive probing of temperature in biological microenvironment at nanometric spatial resolution. Yet, wavelength- and temperature-dependent absorption and scattering of tissues distort measured spectral profile, rendering conventional luminescence nanothermometers (ratiometric, intensity, band shape, or spectral shift) problematic for in vivo temperature determination. Here, a class of lanthanide-based nanothermometers, which are able to provide precise and reliable temperature readouts at varied tissue depths through NIR-II luminescence lifetime, are described. To achieve this, an inert core/active shell/inert shell structure of tiny nanoparticles (size, 13.5 nm) is devised, in which thermosensitive lanthanide pairs (ytterbium and neodymium) are spatially confined in the thin middle shell (sodium yttrium fluoride, 1 nm), ensuring being homogenously close to the surrounding environment while protected by the outmost calcium fluoride shell (CaF₂ , ≈2.5 nm) that shields out bioactive milieu interferences. This ternary structure enables the nanothermometers to consistently resolve temperature changes at depths of up to 4 mm in biological tissues, having a high relative temperature sensitivity of 1.4-1.1% °C^-1 in the physiological temperature range of 10-64 °C. These lifetime-based thermosensitive nanoprobes allow for in vivo diagnosis of murine inflammation, mapping out the precise temperature distribution profile of nanoprobes-interrogated area.

Highly Efficient Aggregation-Induced Red-Emissive Organic Thermally Activated Delayed Fluorescence Materials with Prolonged Fluorescence Lifetime for Time-Resolved Luminescence Bioimaging

Organic thermally activated delayed fluorescence (TADF) materials are emerging as potential candidates for time-resolved fluorescence imaging in biological systems. However, the development of purely organic TADF materials with bright aggregated-state emissions in the red/near-infrared (NIR) region remains challenging. Here, we report three donor-acceptor-type TADF molecules as promising candidates for time-resolved fluorescence imaging, which are engineered by direct connection of electron-donating moieties (phenoxazine or phenothiazine) and an electron-acceptor 1,8-naphthalimide (NI). Theoretically and experimentally, we elucidate that three TADF materials possessed remarkably small ΔE_ST to promote the occurrence of reverse intersystem crossing (RISC). Moreover, they all exhibit aggregation-induced red emissions and long delayed fluorescence lifetimes without the influence of molecular oxygen. More importantly, these long-lived and biocompatible TADF materials, especially the phenoxazine-substituted NI fluorophores, show great potential for high-contrast fluorescence lifetime imaging in living cells. This study provides further a molecular design strategy for purely organic TADF materials and expands the versatile biological application of long-lived fluorescence research in time-resolved luminescence imaging.

Enhancing energy migration upconversion through a migratory interlayer in the core-shell-shell nanostructure towards latent fingerprinting

Mechanistic studies on photon upconversion play a critical role in the fundamental research of the luminescence of rare earth ions as well as their emerging applications. Energy migration mediated upconversion (EMU) has recently shown to be an important model for the photon upconversion of the lanthanide ions without the intermediate states. However, the EMU process is complex and there is seldom work regarding the interactions in the core-shell interfacial area that may impose a quenching effect on the resultant upconverison. Here, we report a strategy to enhance the upconversion luminescence by inserting a migratory NaGdF₄ interlayer in the EMU model to minimize the unwanted quenching processes in the interfacial area. The design of a NaGdF₄:Yb/Tm@NaGdF₄@NaGdF₄:A (A = Dy, Sm, Nd, Eu, Tb) core-shell-shell nanostructure indeed leads to an enhancement of photon upconversion under 980 nm excitation. The details of the interfacial quenching processes between the Tm³⁺ in the core and the emitters in the shell were investigated. Moreover, these optimized upconversion nanoparticles can be used in the multicolor latent fingerprint recognition with the secondary fingerprint details easily achievable, showing great potential in the anti-counterfeiting of fingerprints for information security.

Fluorescence Lifetime-Tunable Water-Resistant Perovskite Quantum Dots for Multidimensional Encryption

Using temporal dimension in optical multiplexing is a promising method to increase the security of data encryption. However, adjusting the fluorescence lifetime of light-emitting material often results in inevitable changes in their fluorescence spectra, which is unfavorable for confidential information protection. Here, we report the preparation of various perovskite quantum dot/polymer nanospheres (PQD/polymer) with tunable and long fluorescence lifetimes but identical fluorescence spectra, which are ideal multidimensional data encryption materials. This new data encryption strategy utilizes the water sensitivity of perovskite and achieves spatial dimension encryption of information using different water stabilities between uncoated perovskite quantum dots and PQD/polymer. The fluorescence lifetime of PQD/polymer is used as the coding element to achieve temporal dimension data encryption, and the data are decrypted by fluorescence lifetime imaging microscopy and time-gated luminescence imaging techniques. This study shows the potential of PQD/polymer as a new class of materials for advanced data encryption.

Tin-Doped Near-Infrared Persistent Luminescence Nanoparticles with Considerable Improvement of Biological Window Activation for Deep Tumor Photodynamic Therapy

The photodynamic therapy (PDT) as a promising antitumor therapy technique is greatly hampered by the low tissue penetration of light and the photothermal effect of prolonged irradiation. Near-infrared (NIR) persistent luminescence nanoparticles (NPLNPs) possess the potential for application in next-generation PDT. However, owing to the low re-excitation efficiency of NPLNPs in deep tissue, the current PDT nanoplatform based on NPLNPs is faced with the disadvantage of decreased PDT efficiency induced by persistent luminescence (PersL) decay at the lesion site. Herein, NPLNPs, Zn_1.3Ga_1.4Sn_0.3O₄:Cr³⁺ (ZGS), with small particle sizes and excellent optical properties are synthesized via a simple acetylacetonate combustion method. The ZGS can be repeatedly excited by the biological window (659 nm) light to produce a strong NIR (700 nm) PersL. The response efficiency of ZGS to the wavelength in the biological window has been greatly improved by doping Sn⁴⁺ into the ZnGa₂O₄ matrix, which is 55 times higher than that of traditional ZnGa₂O₄:Cr³⁺. We further develop a PDT nanoplatform by modifying a photosensitizer on its surface. The PDT experiments show that the developed nanoplatform can achieve continuous and efficient tumor PDT with a depth of up to 3 cm by repeated excitation using a 659 nm LED. The NPLNPs largely solve the problem of the low re-excitation efficiency after NIR PersL decay of traditional NPLNPs in deep tissue applications and will further promote the application of NIR PLNPs in the biomedical field.

Polyethylenimine-Assisted Generation of Optical Nanoprobes for Biosensing Applications

Detection of analytes in biological systems is pivotal to explore their physiological roles and provide diagnostic and treatment options for related diseases, which however remains a great challenge. Optical nanoprobes that exhibit absorption or fluorescence signal changes in response to the targets of interest have emerged as a versatile class of biosensors in the field. Polyethylenimine (PEI) with abundant amine groups plays indispensable roles in the construction of optical nanoprobes and mediating the sensing processes. After interaction with analytes, PEI-based optical nanoprobes can be induced to form aggregates, be disassembled or separated into individual units, or undergo structure/component alterations. As such, the optical properties of these nanoprobes have corresponding changes, allowing for sensitive and selective detection of a wide variety of analytes in biological environment. Up to now, detections of reactive oxygen species, pH, metal ions, biothiols, neurotransmitters, therapeutic agents, oxygen levels, enzyme activities, and virus/bacteria have been successfully demonstrated using PEI-based optical nanoprobes. Herein, we summarize the recent developments of PEI-based optical nanoprobes for biosensing applications and highlight the probe designs and sensing mechanisms. The existing challenges and prospects regarding biosensing applications of PEI-based optical nanoprobes are also briefly discussed.

Near-Infrared Multipurpose Lanthanide-Imaging Nanoprobes

Optical imaging plays a growing role in modern biomedical research and clinical applications due to its high sensitivity, superb spatiotemporal resolution and minimal hazards. Lanthanide-doped nanoparticles (LDNPs), as a classical category of luminescent materials, exhibit promising photostability, near-infrared (NIR)-excited frequency up-/down-converting capabilities, emission fine-tuning and multispectral features, which have greatly promoted the endeavors of deeper and clearer diagnostics in complex living conditions. This review focuses on the recent advances of LDNP-based multipurpose imaging studies using upconversion, downshifting, lifetime, photoacoustic and multimodal nanoprobes in the NIR (650-1000 nm) and the second near-infrared window (NIR-II, 1000-1700 nm). The principle and design of various functional, activatable, multiplexing or multimodal lanthanide-imaging nanoprobes (LINPs) as well as representative biophotonic applications are summarized in detail. In addition, the future perspectives and challenges for facilitating LINPs to clinical translations are discussed.

Eu(III) Tetrahedron Cage as a Luminescent Chemosensor for Rapidly Reversible and Turn-On Detection of Volatile Amine/NH3

Because of the involvement of the gas-solid diffusion, device fabrication, and the relatively complex photophysical process, the lanthanide complexes are rarely exploited as fluorescence sensors for volatile compound (VC) detection. Herein, we report the first example of a discrete 3D Ln-based architecture as a sensor for VCs. The designed Eu₄L₄ tetrahedral cage shows highly selective, rapidly reversible, and turn-on emissive responses toward volatile amines/NH₃ in a spin-coated film. Through the comprehensive spectral characteristic and density functional theory calculation, an intermolecular weak nucleophilic interaction is proposed for this response mechanism. Combining this weak interactions with the permeability of the cage, the film presents subsecond to second timescales rapid response; combining the fitting electrophilic capability of the β-diketonate units to amine nitrogen with the tunable intramolecular charge-transfer feature, the cage shows excellent selectivity and turn-on emissive response. This work provides a new clue to develop the lanthanide complexes as luminescence probes for VCs.

Near-infrared/visible-emitting nanosilica modified with silylated Ru(II) and Ln(III) complexes

Three luminescent silica-based nanohybrids were fabricated by grafting of silylated Ru(II) and Nd/Yb(III) complexes onto mesoporous silica nanoparticles obtained by microemulsion method. The prepared nanohybrids were characterized by Fourier transform-Raman spectroscopy, solid state-nuclear magnetic resonance, high resolution-transmission electron microscopy and scanning and transmission electron microscopy techniques. The chemical integrity and the grafting of all complexes inside MSNs nanopores as well as a good distribution of metal complexes onto MSNs surface were achieved for all nanohybrids. Photophysical results revealed that by monitoring the excitation on Ru(II) moieties from SiO ₂ -RuNd and SiO ₂ -RuYb nanohybrids, the sensitization of NIR-emitting Nd/Yb(III) ions were successfully detected via energy transfer processes. Energy transfer rates (k _EnT) of 0.20 × 10⁷ and 0.11 × 10⁷ s^-1 and efficiencies of energy transfer (η _EnT) of 40% and 27.5% were obtained for SiO ₂ -RuNd and SiO ₂ -RuYb nanohybrids, respectively. These results confirm the preparation of promising dual (near-infrared/visible)-emitting silica-based nanohybrids as new nanotools for applications as nanosensores and nanomarkers.

Neodymium-Sensitized Nanoconstructs for Near-Infrared Enabled Photomedicine

Neodymium (Nd³⁺ )-sensitized nanoconstructs have gained increasing attention in recent decades due to their unique properties, especially optical properties. The design of various Nd³⁺ -sensitized nanosystems is expected to contribute to medical and health applications, due to their advantageous properties such as high penetration depth, excellent photostability, non-photobleaching, low cytotoxicity, etc. However, the low conversion efficiency and potential long-term toxicity of Nd³⁺ -sensitized nanoconstructs are huge obstacles to their clinical translations. This review article summarizes three energy transfer pathways of all kinds of Nd³⁺ -sensitized nanoconstructs focusing on the properties of Nd³⁺ ions and discusses their recent potential applications as near-infrared (NIR) enabled photomedicine. This review article will contribute to the design and fabrication of novel Nd³⁺ -sensitized nanoconstructs for NIR-enabled photomedicine, aiming for potentially safer and more efficient designs to get closer to clinical usage.

X-ray/red-light excited ZGGO:Cr,Nd nanoprobes for NIR-I/II afterglow imaging

NIR-I/II afterglow nanoprobes for deep-tissue autofluorescence-free bioimaging were developed based on the persistent energy transfer.

A smartphone-integrated ratiometric fluorescence sensing platform for visual and quantitative point-of-care testing of tetracycline

A smartphone-integrated ratiometric fluorescent sensing system (DPA-Ce-GMP-Eu) for visual and point-of-care testing (POCT) of tetracycline with high sensitivity and accuracy was developed. The blue fluorescence of DPA-Ce-GMP was changed into red by doping with Eu³⁺ duo to the energy transfer from Ce³⁺ to Eu³⁺. Upon exposure to tetracycline, coordination between Eu³⁺ and tetracycline blocks energy transfer from Ce³⁺ to Eu³⁺, converting the fluorescent color from red to blue. The tetracycline detection can be realized within a wide concentration range from 0.01 μM to 45 μM. The limit of detection (LOD) reaches as low as 6.6 nM. To realize quantitative point-of-care detection in real samples, a portable device with smartphone as signal reader and analyzer is further designed to integrate with the DPA-Ce-GMP-Eu sensing platform. The Color Picker APP installed in the smartphone can convert the Red, Green and Blue (RGB) channels of the fluorescence images into digital values. With milk as real sample, tetracycline can be on-site detected with LOD of 10.8 nM. This developed platform presents a great promise for POCT in practical application with merits of low cost, easy carry, simple operation, and excellent selectivity and repeatability.

Imaging dopant distribution across complete phase transformation by TEM and upconversion emission

Correlating dopant distribution to its optical response represents a complex challenge for nanomaterials science. Differentiating the "true" clustering nature from dopant pairs formed in statistical distribution complicates even more the elucidation of doping-functionality relationship. The present study associates lanthanide dopant distribution, including all significant events (enrichment, depletion and surface segregation), to its optical response in upconversion (UPC) at the ensemble and single-nanoparticle level. A small deviation from the Er nominal concentration of a few percent is able to induce clear differences in Er UPC emission color, intensity, excited-state dynamics and ultimately, UPC mechanisms, across tetragonal to monoclinic phase transformation in rationally designed Er doped ZrO2 nanoparticles. Rare evidence of a heterogeneous dopant distribution leading to the coexistence of two polymorphs in a single nanoparticle is revealed by Z- and phase contrast transmission electron microscopy (TEM). Despite their spatial proximity, Er in the two polymorphs are spectroscopically isolated, i.e. they do not communicate by energy transfer. Segregated Er, which is well imaged in TEM, is absent in UPC, while the minor phase content overlooked by X-ray diffraction and TEM is revealed by UPC. The outstanding sensitivity of combined TEM and UPC emission to subtle deviations from uniform doping in the diluted concentration regime renders such an approach relevant for various functional oxides supporting lanthanide dopants as emitters.