Flexible Sandwich-Structured Electromagnetic Interference Shielding Nanocomposite Films with Excellent Thermal Conductivities

Microskeleton Magnetic Nanofiller Composite with Highly Reliable Superhydrophobic Protection for Long-Lived Electromagnetic Interface Shielding

Superhydrophobic/electromagnetic interference (EMI) shielding materials have received a great deal of attention, attributing to their excellent water repellence characteristic. However, it is really challenging to simultaneously achieve materials with superhydrophobicity, high EMI shielding performance, and long-term stability of these materials that can operate around the clock in harsh service conditions. Herein, a novel strategy to create an integrated microskeleton magnetic nanofiller composite (IMMNC) with exceptional liquid repellency, enhanced EMI shielding effectiveness, and extreme environment reliability is reported. The superhydrophobicity of the IMMNC was maintained after extreme mechanical and chemical damage due to the synergistic enhancement between epoxy-silicone oligomers/polymerized rosin and microskeleton. Consecutively hierarchical micro/nanoarchitectures and conductive pathways endow the IMMNC with a high EMI shielding effectiveness up to 80.7 dB and a satisfactory antifouling capacity for solid and water-based contaminants. More interestingly, this composite still maintains a superior EMI shielding performance after being subjected to ultrasonic vibration, low (-20 °C) or high temperature (300 °C), and even strong acid (1 M), demonstrating its great potential and reliability as a high-performance EMI shielding material resistant to harsh operating conditions. This work provides an efficient and practical solution for developing next-generation EMI shielding materials with high reliability in an all-weather complex and changeable environment.

Interfused core-shell heterogeneous graphene/MXene fiber aerogel for high-performance and durable electromagnetic interference shielding

Flexible, lightweight, and durable electromagnetic interference (EMI) shielding materials are urgently required to solve the increasingly serious electromagnetic radiation pollution. Transition metal carbides/nitrides (MXenes) are promising candidates for EMI shielding materials because of their excellent metallic electrical conductivity. However, MXenes are highly susceptible to oxidization when exposed to wet environments, leading to the loss of their functional properties and degradation of reliability and stability. Herein, an interfused core-shell heterogeneous reduced graphene oxide (rGO)/MXene aerogel (GMA) is designed for the first time via coaxial wet spinning and freeze-drying. The fabricated GMAs exhibit excellent EMI shielding performance, and the EMI shielding effectiveness (SE) and specific EMI SE can be up to 83.3 dB and 3119 dB·cm³/g, respectively, which is higher than most carbon-based and MXene-based aerogels and foams. More importantly, GMAs have only a 17.4 % degradation in EMI shielding performance after 120 days due to the protection of hydrophobic graphene sheath, exhibiting superior EMI shielding durability to its MXene film counterpart. Moreover, the hydrophobic GMAs exhibit good oil/water separation and thermal insulation performance. The interfused core-shell GMAs are highly promising for applications in durable EMI shielding, thermal insulation, oil/water separation and sensors, etc.

Ultrastrong and Hydrophobic Sandwich-Structured MXene-Based Composite Films for High-Efficiency Electromagnetic Interference Shielding

Electromagnetic interference (EMI) shielding materials are highly necessary to solve the problem of electromagnetic radiation. Transition-metal carbide/nitride (MXene) materials offer great potential for the construction of high-performance EMI shields because of their high electrical conductivity and versatile surface chemistry. However, MXene generally suffers from poor mechanical and oxidation-resistant properties, which hinders its practical applications. Herein, flexible, strong, and hydrophobic sandwich-structured composite films (H-S-MXene), consisting of a conductive MXene layer and supporting aramid nanofiber layer, were fabricated using step-by-step vacuum-assisted filtration and dip coating. Given the unique sandwich structure, hydrogen bonding interactions, and covalent cross-linking of the MXene sheets, the H-S-MXene composite films demonstrated simultaneously excellent EMI shielding and mechanical properties. The EMI shielding effectiveness of the H-S-MXene composite film with 20 wt % MXene content reached 46.1 dB at thickness of 23.2 ± 0.5 μm, and the tensile strength of the film reached 302.1 MPa, which outperformed other reported EMI shielding materials. The excellent mechanical flexibility and hydrophobicity of the H-S-MXene composite films ensured a stable EMI shielding performance, which could withstand cycled bending, torsion, and exposure to aqueous environments. These impressive features made the H-S-MXene composite films promising candidates for electronic devices and aerospace. This study provides important guidance for the rational design of stable MXene-based composites with advanced properties.

Pressure-sensitive antibacterial hydrogel dressing for wound monitoring in bed ridden patients

Pressure ulcer is a common chronic injury in the bedridden population. The wound is easily subjected to secondary pressure injury due to the inconvenient mobility of patients, which greatly prolongs the hospital stay of patients and is highly prone to wound infection or other complications. It is urgent to develop a multifunctional wound dressing with pressure sensing, real-time monitoring, and wound therapy to overcome the secondary pressure injury during treatment. Here, a polyvinyl alcohol/acrylamide-ionic liquid hydrogel dressing is designed based on the antibacterial property and electrical conductivity of imidazolidine ionic liquids. Compared with existing pressure-sensing hydrogels, the hydrogel exhibits extremely high pressure sensitivity (9.19 kPa^-1). Meanwhile, the good real-time responsiveness, stable signal output as well as excellent mechanical properties enable the hydrogel to monitor human movement on a large scale, and transmit the pressure status of patient wounds to nursing staff in a timely manner to avoid secondary pressure injuries. In addition, this hydrogel dressing exhibits a wide range of antibacterial activities against Gram-negative and Gram-positive bacteria as well as fungi, and has a significant therapeutic effect on full-thickness skin wounds by inhibiting wound infection, rapidly eradicating inflammation, promoting proliferation and tissue remodeling. This multifunctional hydrogel dressing opens a therapeutic and regulatory two-pronged strategy avenue through chronic wound management and pressure sensing monitoring.

Structural evolution of MXenes and their composites for electromagnetic interference shielding applications

Nowadays, the extensive utilization of electronic devices and equipment inevitably leads to severe electromagnetic interference (EMI) issues. Therefore, EMI shielding materials have drawn considerable attention, and great effort has been devoted to the exploration of high-efficiency EMI shielding materials. As a novel kind of 2D transition metal carbide material, MXenes have been widely investigated for EMI shielding in the past few years due to their extraordinary electrical conductivity, large specific surface area, light weight, and easy processability. In view of the great achievements in MXene-based materials for EMI shielding, herein, we reviewed the recent studies on the structural design and evolution of MXenes and their composites for EMI shielding. First, the methods for structural control of MXenes, including HF etching, in situ HF etching, fluorine-free etching, electrochemical etching, and molten salt etching, are systematically summarized. Then we illustrate the fundamental relationship between the microstructure of MXenes and the EMI shielding mechanism. In the following, the effects of different synthesis methods and structures of MXene-based composite materials as well as their EMI shielding performances are comprehensively discussed. Lastly, future prospects for the development of MXene-based composite materials in EMI shielding applications are commented on.

Magnetic Interacted Interaction Effect in MXene Skeleton: Enhanced Thermal-Generation for Electromagnetic Interference Shielding

With the rapid advancements of portable and wearable equipment, high-efficiency electromagnetic interference (EMI) shielding materials are highly entailed to eliminate radiated electromagnetic pollution. Herein, by assembling hexagonal SrFe₁₂ O₁₉ flakes into a Ti₃ C₂ T_x MXene/MWCNT substrate, a magnetized Ti₃ C₂ T_x -based film is successfully fabricated by a facile filtration approach. Carbon nanotubes are used as isolation agents to realize the submicroscopic dispersion of MXene and SrFe₁₂ O₁₉ . The obtained MXene/MWCNTs/SrFe₁₂ O₁₉ film shows a high electrical conductivity of 438 S cm^-1 and an excellent EMI shielding effectiveness of 62.9 dB in X-band at a thickness of only 40 µm. Benefiting from a strong magnetic response ability and an expanded magnetic coupling space, hexagonal SrFe₁₂ O₁₉ sheets can efficiently consume incident magnetic field energy by domain wall migration and the ferromagnetic resonance effect. Boosted EMI shielding performance can be achieved by improving the magnetic loss in the Ti₃ C₂ T_x MXene/MWCNTs/SrFe₁₂ O₁₉ film, preventing the secondary reflection of electromagnetic waves. Meanwhile, magnetized MXene-based films display the freestanding and flexible features and are suitable for installation in electric devices. It is anticipated that this strategy offers new ideas for designing EMI shielding films and in broadening potential utility of MXene-based materials.

Layer-by-Layer Assembly of Multifunctional NR/MXene/CNTs Composite Films with Exceptional Electromagnetic Interference Shielding Performances and Excellent Mechanical Properties

With the rapid advance of electronics, the light, flexible, and multifunctional composite films with high electromagnetic interference (EMI) shielding effectiveness and excellent thermal management are highly desirable for next-generation portable and wearable electronic devices. Herein, a series of flexible and ultrathin natural rubber/MXene/carbon nanotubes (NR/MXene/CNTs) composite films with sandwich structure are constructed layer by layer through a facile vacuum-assisted filtration method for EMI shielding and Joule heating application. The fabricated NR/MXene/CNTs-50 composite film, with NR/MXene as inner layer and NR/CNTs as out layers, not only has high EMI shielding efficient, but also has excellent comprehensive mechanical properties at the thickness of only 200 µm. In addition, the superior environmental durability, high electrothermal conversion efficiency, hydrophobicity, and fine performance stability after periodic cyclic bending make the film possess more value in practical application.

Biocompatibility improvement and controlled in vitro degradation of poly (lactic acid)-b-poly(lactide-co-caprolactone) by formation of highly oriented structure for orthopedic application

Poly (lactic acid) (PLA) has been proposed as a promising orthopedic implant material, whereas insufficient mechanical strength, unsatisfied biocompatibility and inappropriate degradation rate restrict its further application. In this work, self-reinforced poly (lactic acid)-b-poly(lactide-co-caprolactone) (PLA-b-PLCL) block copolymer with long-chain branches was fabricated through two-stage orientation. Compared with smooth and hydrophobic PLA surface, the surface of PLA-b-PLCL presented micro-phase separated structure with improved hydrophilicity, and cells seeded on it showed improved adhesion/proliferation and high alkaline phosphatase (ALP) activity. After the 1st stage orientation at temperature higher than T_g1 (glass transition temperature of PLA phase), the amount of CH₃ and CO groups on surface of PLA-b-PLCL increased, while "groove-ridge" structure formed, resulting in enhancement of surface hydrophobicity. After the 2nd stage orientation at T_g1  ~ T_g2 (glass transition temperature of PLCL phase), surface hydrophobicity/amount of CO groups further increased and "groove-ridge" structure became more significant. Due to suitable wettability and enhanced material-cell mechanical interlocking, cell proliferation/ALP activity were improved and a continuous cell layer formed on sample surface. During in vitro degradation in phosphate buffered saline solution, by introduction of PLCL segments, the crystallinity decreased and solution absorption increased, resulting in a rapid deterioration of mechanical properties. After the 1st stage orientation, a dense microfibrillar structure with high crystallinity formed, which hindered diffusion of solution and delay hydrolytic degradation. After the 2nd stage orientation, PLCL segments were arranged more closely, resulting in a further inhibition of degradation, which was helpful for controlling the strength decay rate of PLA as bone fixation materials.

Electromagnetic Interference Shielding with Electrospun Nanofiber Mats—A Review of Production, Physical Properties and Performance

With a steadily increasing number of machines and devices producing electromagnetic radiation, especially, sensitive instruments as well as humans need to be shielded from electromagnetic interference (EMI). Since ideal shielding materials should be lightweight, flexible, drapable, thin and inexpensive, textile fabrics belong to the often-investigated candidates to meet these expectations. Especially, electrospun nanofiber mats are of significant interest since they can not only be produced relatively easily and cost efficiently, but they also enable the embedding of functional nanoparticles in addition to thermal or chemical post-treatments to reach the desired physical properties. This paper gives an overview of recent advances in nanofiber mats for EMI shielding, discussing their production, physical properties and typical characterization techniques.

Bioinspired, High-Strength, and Flexible MXene/Aramid Fiber for Electromagnetic Interference Shielding Papers with Joule Heating Performance

High-strength, flexible, and multifunctional characteristics are highly desirable for electromagnetic interference (EMI) shielding materials in the field of electric devices. In this work, inspired by natural nacre, we fabricated large-scale, layered MXene/amarid nanofiber (ANF) nanocomposite papers by blade-coating process plus sol-gel conversion step. The as-synthesized papers possess excellent mechanical performance, that is, exceptional tensile strength (198.80 ± 5.35 MPa), large strain (15.30 ± 1.01%), and good flexibility (folded into various models without fracture), which are ascribed to synergetic interactions of the interconnected three-dimensional network frame and hydrogen bonds between MXene and ANF. More importantly, the papers with extensive continuous conductive paths formed by MXene nanosheets present a high EMI shielding effectiveness of 13188.2 dB cm² g^-1 in the frequency range of 8.2-12.4 GHz. More interestingly, the papers show excellent Joule heating performance with a fast thermal response (<10 s) and a low driving voltage (≤4 V). As such, the large-scale MXene/ANF papers are considered as promising alternatives in a wide range of applications in electromagnetic shielding and thermal management.

Millefeuille-inspired highly conducting polymer nanocomposites based on controllable layer-by-layer assembly strategy for durable and stable electromagnetic interference shielding

High-performance conductive polymer nanocomposites containing two-dimensional (2D) MXene are garnering substantial interest for electromagnetic shielding interference (EMI) in flexible electronics. However, owing to the non-sticky nature and undesirable mechanical performances of freestanding MXene film, it remains a formidable challenge to make the trade-off between outstanding EMI shielding capability and high stability. In this study, inspired by the structure and manufacturing process of millefeuille cakes, we propose a controllably layer-by-layer assembling strategy for fabricating flexible multilayered EMI shielding composite films based on MXene and an inherently conductive polymer (ICP). The multilayer films bearing alternating aramid nanofibers/polypyrrole nanowires (AFPy) and Ti₃C₂T_x reinforced by waterborne polyurethane (Ti₃C₂T_x@WPU) layers are orderly constructed by a facile alternating vacuum filtration method. Benefiting from the special architectures, the AFPy-70/Ti₃C₂T_x@WPU-4 film exhibits a high electrical conductivity of 1.74 S cm^-1 and superior EMI shielding effectiveness of 40.9 dB at lower Ti₃C₂T_x loading content (32 wt%). Moreover, synergistic integration of hydrogen bonding and π-π stacks in multilayered films is achieved, especially in tandem with controlled crack generation within the whole film. Excellent EMI shielding performance remains well maintained even after being suffered to back-and-forth bending test (over 10,000 cycles), ultrasonication, and cryogenic temperature, validating great potential as high-performance EMI shielding film resisting extreme conditions.

A Perspective for Developing Polymer-Based Electromagnetic Interference Shielding Composites

The rapid development of aerospace weapons and equipment, wireless base stations and 5G communication technologies has put forward newer and higher requirements for the comprehensive performances of polymer-based electromagnetic interference (EMI) shielding composites. However, most of currently prepared polymer-based EMI shielding composites are still difficult to combine high performance and multi-functionality. In response to this, based on the research works of relevant researchers as well as our research group, three possible directions to break through the above bottlenecks are proposed, including construction of efficient conductive networks, optimization of multi-interfaces for lightweight and multifunction compatibility design. The future development trends in three directions are prospected, and it is hoped to provide certain theoretical basis and technical guidance for the preparation, research and development of polymer-based EMI shielding composites.

Hierarchical Ti3C2Tx@ZnO Hollow Spheres with Excellent Microwave Absorption Inspired by the Visual Phenomenon of Eyeless Urchins

Ingenious microstructure design and rational composition selection are effective approaches to realize high-performance microwave absorbers, and the advancement of biomimetic manufacturing provides a new strategy. In nature, urchins are the animals without eyes but can "see", because their special structure composed of regular spines and spherical photosensitive bodies "amplifies" the light-receiving ability. Herein, inspired by the above phenomenon, the biomimetic urchin-like Ti₃C₂T_x@ZnO hollow microspheres are rationally designed and fabricated, in which ZnO nanoarrays (length: ~ 2.3 μm, diameter: ~ 100 nm) as the urchin spines are evenly grafted onto the surface of the Ti₃C₂T_x hollow spheres (diameter: ~ 4.2 μm) as the urchin spherical photosensitive bodies. The construction of gradient impedance and hierarchical heterostructures enhance the attenuation of incident electromagnetic waves. And the EMW loss behavior is further revealed by limited integral simulation calculations, which fully highlights the advantages of the urchin-like architecture. As a result, the Ti₃C₂T_x@ZnO hollow spheres deliver a strong reflection loss of - 57.4 dB and broad effective absorption bandwidth of 6.56 GHz, superior to similar absorbents. This work provides a new biomimetic strategy for the design and manufacturing of advanced microwave absorbers.

Environmentally Tough and Stretchable MXene Organohydrogel with Exceptionally Enhanced Electromagnetic Interference Shielding Performances

Conductive hydrogels have potential applications in shielding electromagnetic (EM) radiation interference in deformable and wearable electronic devices, but usually suffer from poor environmental stability and stretching-induced shielding performance degradation. Although organohydrogels can improve the environmental stability of materials, their development is at the expense of reducing electrical conductivity and thus weakening EM interference shielding ability. Here, a MXene organohydrogel is prepared which is composed of MXene network for electron conduction, binary solvent channels for ion conduction, and abundant solvent-polymer-MXene interfaces for EM wave scattering. This organohydrogel possesses excellent anti-drying ability, low-temperature tolerance, stretchability, shape adaptability, adhesion and rapid self-healing ability. Two effective strategies have been proposed to solve the problems of current organohydrogel shielding materials. By reasonably controlling the MXene content and the glycerol-water ratio in the gel, MXene organohydrogel can exhibit exceptionally enhanced EM interference shielding performances compared to MXene hydrogel due to the increased physical cross-linking density of the gel. Moreover, MXene organohydrogel shows attractive stretching-enhanced interference effectiveness, caused by the connection and parallel arrangement of MXene nanosheets. This well-designed MXene organohydrogel has potential applications in shielding EM interference in deformable and wearable electronic devices.

Flexible Ti3C2T x /(Aramid Nanofiber/PVA) Composite Films for Superior Electromagnetic Interference Shielding

Multifunctional electromagnetic interference (EMI) shielding materials would solve electromagnetic radiation and pollution problems from electronic devices. Herein, the directional freeze-drying technology is utilized to prepare the aramid nanofiber/polyvinyl alcohol aerogel with a directionally porous structure (D-ANF/PVA), and the Ti₃C₂T_x dispersion is fully immersed into the D-ANF/PVA aerogel via ultrasonication and vacuum-assisted impregnation. Ti₃C₂T_x/(ANF/PVA) EMI shielding composite films with directionally ordered structure (D-Ti₃C₂T_x/(ANF/PVA)) are then prepared by freeze-drying and hot pressing. Constructing a directionally porous structure enables the highly conductive Ti₃C₂T_x nanosheets to be wrapped on the directionally porous D-ANF/PVA framework in order arrangement and overlapped with each other. And the hot pressing process effectively reduces the layer spacing between the stacked wavy D-ANF/PVA, to form a large number of Ti₃C₂T_x-Ti₃C₂T_x continuous conductive paths, which significantly improves the conductivity of the D-Ti₃C₂T_x/(ANF/PVA) EMI shielding composite film. When the amount of Ti₃C₂T_x is 80 wt%, the EMI shielding effectiveness (EMI SE) and specific SE (SSE/t) of D-Ti₃C₂T_x/(ANF/PVA) EMI shielding composite film achieve 70 dB and 13790 dB·cm²·g⁻¹ (thickness and density of 120 μm and 0.423 g·cm⁻³), far superior to random-structured Ti₃C₂T_x/(ANF/PVA) (R-Ti₃C₂T_x/(ANF/PVA)) composite film (46 dB and 9062 dB·cm²·g⁻¹, respectively) via blending-freeze-drying followed by hot pressing technology. Meanwhile, the D-Ti₃C₂T_x/(ANF/PVA) EMI shielding composite film possesses excellent flexibility and foldability.

A Facile Fabrication of PA12/CNTs Nanocomposites with Enhanced Three-Dimensional Segregated Conductive Networks and Electromagnetic Interference Shielding Property through Selective Laser Sintering

The material design could be very critical in the preparation of conductive polymer composites for electromagnetic interference (EMI) shielding applications. In this work, two methods were proposed to prepare PA12 composite powders coated with CNTs, including ball-milling (BM) and ultrasonic dispersion-liquid phase deposition strategies. Then, by applying selective laser sintering printing (SLS) 3D printing, the segregated network structures were successfully constructed. Various characterization techniques were employed to validate the presence of the formed segregated network structure in the SLS 3D printed parts. The BM SLS 3D printed part at a loading of 5.66 wt % CNTs exhibited an optimum electrical conductivity of 3.0 S/m and an electromagnetic interference shielding (EMI SE) of 23.9 dB (2.0 mm thickness), while its electrical percolation threshold was found to be at 0.347 wt %. However, the EMI SE values of homogenous PA12/CNTs composites prepared by the melt compounding-cryogenic pulverization (MP) method and melt compounding-compression molding were only 9.8 and 15.6 dB, respectively. In addition, the incorporation of CNTs decreased the mechanical performance of the PA12/CNTs printed part due to their negative effect on the sintering. However, such a decrease could be inhibited by increasing the laser energy density. The related investigation could offer a solution to the preparation of the conductive polymer composite and the EMI shielded material through SLS 3D printing processing.

The Investigation of the Effect of Filler Sizes in 3D-BN Skeletons on Thermal Conductivity of Epoxy-Based Composites

Thermally conductive and electrically insulating materials have attracted much attention due to their applications in the field of microelectronics, but through-plane thermal conductivity of materials is still low at present. In this paper, a simple and environmentally friendly strategy is proposed to improve the through-plane thermal conductivity of epoxy composites using a 3D boron nitride (3D-BN) framework. In addition, the effect of filler sizes in 3D-BN skeletons on thermal conductivity was investigated. The epoxy composite with larger BN in lateral size showed a higher through-plane thermal conductivity of 2.01 W/m·K and maintained a low dielectric constant of 3.7 and a dielectric loss of 0.006 at 50 Hz, making it desirable for the application in microelectronic devices.

High-Efficiency Electromagnetic Interference Shielding of rGO@FeNi/Epoxy Composites with Regular Honeycomb Structures

With the rapid development of fifth-generation mobile communication technology and wearable electronic devices, electromagnetic interference and radiation pollution caused by electromagnetic waves have attracted worldwide attention. Therefore, the design and development of highly efficient EMI shielding materials are of great importance. In this work, the three-dimensional graphene oxide (GO) with regular honeycomb structure (GH) is firstly constructed by sacrificial template and freeze-drying methods. Then, the amino functionalized FeNi alloy particles (f-FeNi) are loaded on the GH skeleton followed by in-situ reduction to prepare rGH@FeNi aerogel. Finally, the rGH@FeNi/epoxy EMI shielding composites with regular honeycomb structure is obtained by vacuum-assisted impregnation of epoxy resin. Benefitting from the construction of regular honeycomb structure and electromagnetic synergistic effect, the rGH@FeNi/epoxy composites with a low rGH@FeNi mass fraction of 2.1 wt% (rGH and f-FeNi are 1.2 and 0.9 wt%, respectively) exhibit a high EMI shielding effectiveness (EMI SE) of 46 dB, which is 5.8 times of that (8 dB) for rGO/FeNi/epoxy composites with the same rGO/FeNi mass fraction. At the same time, the rGH@FeNi/epoxy composites also possess excellent thermal stability (heat-resistance index and temperature at the maximum decomposition rate are 179.1 and 389.0 °C respectively) and mechanical properties (storage modulus is 8296.2 MPa).

Pressure-Induced Self-Interlocked Structures for Expanded Graphite Composite Papers Achieving Prominent EMI Shielding Effectiveness and Outstanding Thermal Conductivities

High-performance films via layer-by-layer assembly of two-dimensional (2D) materials would provide all possibilities for the development of modern integrated electronics. However, the stacked structure between nanosheets and large-scale fabrication still remain a great challenge. Herein, Fe₃O₄/expanded graphite (EG) papers are fabricated via in situ oxidation of ferrocene onto EG nanosheets, followed by a continuous roll-in process. Upon mechanical compaction, the self-interlocked structures driven by close overlapping and hooking of nanosheets in Fe₃O₄/EG (FG) composites remarkably facilitate the construction of phonon and electron transmission channels and improve mechanical strength. FG papers exhibit prominent shielding effectiveness (67.1 dB at ∼100 μm) with enhanced absorptivity (∼0.1, surpassing lots of conductive film materials), stemming from the synergistic effect of electrical and magnetic properties. Also, the electromagnetic interference (EMI) shielding performance shows prominent reliability after bending (2000 cycles) and ultrasonic treatment (30 min). The corresponding tensile strength reaches 35.8 MPa; meanwhile, the corresponding in-plane thermal conductivity coefficient is as high as 191.7 W/(m·K), which can rapidly and efficiently accelerate heat dissipation. In particular, FG papers also reveal rapid response, controllable, and highly stable Joule heating performance and present promising prospects in the fields of radiation-proof clothing, flexible heaters, portable wearable devices, and aerospace.

Silicone Elastomer Composites Fabricated with MgO and MgO-Multi-Wall Carbon Nanotubes with Improved Thermal Conductivity

The effect of multiwall carbon nanotubes (MWCNTs) and magnesium oxide (MgO) on the thermal conductivity of MWCNTs and MgO-reinforced silicone rubber was studied. The increment of thermal conductivity was found to be linear with respect to increased loading of MgO. In order to improve the thermal transportation of phonons 0.3 wt % and 0.5 wt % of MWCNTs were added as filler to MgO-reinforced silicone rubber. The MWCNTs were functionalized by hydrogen peroxide (H₂O₂) to activate organic groups onto the surface of MWCNTs. These functional groups improved the compatibility and adhesion and act as bridging agents between MWCNTs and silicone elastomer, resulting in the formation of active conductive pathways between MgO and MWCNTs in the silicone elastomer. The surface functionalization was confirmed with XRD and FTIR spectroscopy. Raman spectroscopy confirms the pristine structure of MWCNTs after oxidation with H₂O₂. The thermal conductivity is improved to 1 W/m·K with the addition of 20 vol% with 0.5 wt % of MWCNTs, which is an ~8-fold increment in comparison to neat elastomer. Improved thermal conductive properties of MgO-MWCNTs elastomer composite will be a potential replacement for conventional thermal interface materials.

Hierarchically Multifunctional Polyimide Composite Films with Strongly Enhanced Thermal Conductivity

The development of lightweight and integration for electronics requires flexible films with high thermal conductivity and electromagnetic interference (EMI) shielding to overcome heat accumulation and electromagnetic radiation pollution. Herein, the hierarchical design and assembly strategy was adopted to fabricate hierarchically multifunctional polyimide composite films, with graphene oxide/expanded graphite (GO/EG) as the top thermally conductive and EMI shielding layer, Fe₃O₄/polyimide (Fe₃O₄/PI) as the middle EMI shielding enhancement layer and electrospun PI fibers as the substrate layer for mechanical improvement. PI composite films with 61.0 wt% of GO/EG and 23.8 wt% of Fe₃O₄/PI exhibits high in-plane thermal conductivity coefficient (95.40 W (m K)^-1), excellent EMI shielding effectiveness (34.0 dB), good tensile strength (93.6 MPa) and fast electric-heating response (5 s). The test in the central processing unit verifies PI composite films present broad application prospects in electronics fields.

MOF-derived NiFe2S4/Porous carbon composites as electromagnetic wave absorber

The preparation of strong absorption, thin thickness and wide band electromagnetic wave absorbers has always been the focus of research. In this paper, NiFe₂S₄/PC composites, an electromagnetic wave absorbing material with excellent performance, is prepared by introducing Ni-MOF, Fe and S elements into porous carbon framework. The material has a minimum reflection loss (RL_min) of -51.41 dB and the matching thickness is only 1.8 mm. In addition, the effective absorption bandwidth (EAB) is 4.08 GHz when the thickness is 1.9 mm. The rich interface and good impedance matching characteristics are the main reasons for the excellent absorbing performance of the material. The experimental results show that NiFe₂S₄/PC composites is a reasonable and effective electromagnetic wave absorption material.

In vivo performance of electrospun tubular hyaluronic acid/collagen nanofibrous scaffolds for vascular reconstruction in the rabbit model

One of the main challenges of tissue-engineered vascular prostheses is restenosis due to intimal hyperplasia. The aim of this study is to develop a material for scaffolds able to support cell growth while tolerating physiological conditions and maintaining the patency of carotid artery model. Tubular hyaluronic acid (HA)-functionalized collagen nanofibrous composite scaffolds were prepared by sequential electrospinning method. The tubular composite scaffold has well-controlled biophysical and biochemical signals, providing a good matrix for the adhesion and proliferation of vascular endothelial cells (ECs), but resisting to platelets adhesion when exposed to blood. Carotid artery replacement experiment from 6-week rabbits showed that the HA/collagen nanofibrous composite scaffold grafts with endothelialization on the luminal surface could maintain vascular patency. At retrieval, the composite scaffold maintained good structural integrity and had comparable mechanical strength as the native artery. This study indicating that electrospun scaffolds combined with cells may become an alternative to prosthetic grafts for vascular reconstruction.

Discotic Liquid Crystal Epoxy Resins Integrating Intrinsic High Thermal Conductivity and Intrinsic Flame Retardancy

The integration of intrinsic thermal conductivity and intrinsic flame retardancy of epoxy resins shows wider application prospects in electricals and electronics. Discotic liquid crystal epoxy (D-LCE) is synthesized from pyrocatechol, 2-allyloxyethanol, and 3-chloroperoxybenzoic acid. P/Si synergistic flame-retardant co-curing agent (DOPO-POSS, DP) is synthesized from p-hydroxybenzaldehyde, 9, 10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO), and amino terminated polysilsesquioxane (POSS). Finally, D-LCE is cured within liquid crystal range with 4, 4'-diaminodiphenyl methane (DDM) and DP, to obtain intrinsic highly thermal conductive/flame-retardant epoxy resins (D-LCER_DP ). D-LCER_DP-10.0 (10.0 wt% DP) synchronously possesses excellent intrinsic thermal conductivity and intrinsic flame retardancy, with thermal conductivity coefficient in vertical and parallel direction (λ_⊥ and λ_∥ ) of 0.34 and 1.30 W m^-1 K^-1 , much higher than that of general bisphenol A epoxy resin (E-51, λ_⊥ of 0.19 W m^-1 K^-1 , λ_∥ of 0.65 W m^-1 K^-1 ). The limiting oxygen index (LOI) value of D-LCER_DP-10.0 reaches 31.1, also better than those of E-51 (19.8) and D-LCER (21.3).

High Thermal Conductivity and Mechanical Strength Phase Change Composite with Double Supporting Skeletons for Industrial Waste Heat Recovery

The "solid-liquid" leakage and low thermal conductivity of organic phase change materials limit their wide range of applications. In this paper, a novel carbon fiber/boron nitride (CF/BN)-based nested structure was constructed, and then, a series of poly(ethylene glycol) (PEG)-based phase change composites (PCCs) with high thermal conductivity and mechanical strength were prepared via the simple vacuum adsorption technology by employing the CF/BN nested structure as the heat conduction path and supporting material and the in situ obtained cross-linking epoxy resin as another supporting material. The thermal conductivity of the obtained PCC is as high as 0.81 W/m K, which is 7.4 times higher than that sample without the CF/BN nested structure. The support of the double skeletons confers the obtained PCCs with excellent mechanical strength. Surprisingly, there is not any deformation for PCCs under the pressure of 128.5 times its own weight during the phase change process. In addition, the phase change enthalpy of the obtained PCC is as high as 107.9 J/g. All the results indicate that the obtained PEG-based PCCs possess huge application potential in the field of industrial waste heat recovery.