Mechanical properties of the collagen network in human articular cartilage as measured by osmotic stress technique

Effect of water state and polymer chain motion on the mechanical properties of a bacterial cellulose and polyvinyl alcohol (BC/PVA) hydrogel

The effects of water state and polymer chain motion on the mechanical property of bacterial cellulose and a polyvinyl alcohol hydrogel.

Toward patient-specific articular contact mechanics

The mechanics of contacting cartilage layers is fundamentally important to understanding the development, homeostasis and pathology of diarthrodial joints. Because of the highly nonlinear nature of both the materials and the contact problem itself, numerical methods such as the finite element method are typically incorporated to obtain solutions. Over the course of five decades, we have moved from an initial qualitative understanding of articular cartilage material behavior to the ability to perform complex, three-dimensional contact analysis, including multiphasic material representations. This history includes the development of analytical and computational contact analysis methods that now provide the ability to perform highly nonlinear analyses. Numerical implementations of contact analysis based on the finite element method are rapidly advancing and will soon enable patient-specific analysis of joint contact mechanics using models based on medical image data. In addition to contact stress on the articular surfaces, these techniques can predict variations in strain and strain through the cartilage layers, providing the basis to predict damage and failure. This opens up exciting areas for future research and application to patient-specific diagnosis and treatment planning applied to a variety of pathologies that affect joint function and cartilage homeostasis.

Dependence of light attenuation and backscattering on collagen concentration and chondrocyte density in agarose scaffolds

Optical coherence tomography (OCT) has been applied for high resolution imaging of articular cartilage. However, the contribution of individual structural elements of cartilage on OCT signal has not been thoroughly studied. We hypothesize that both collagen and chondrocytes, essential structural components of cartilage, act as important light scatterers and that variation in their concentrations can be detected by OCT through changes in backscattering and attenuation. To evaluate this hypothesis, we established a controlled model system using agarose scaffolds embedded with variable collagen concentrations and chondrocyte densities. Using OCT, we measured the backscattering coefficient (µb) and total attenuation coefficient (µt) in these scaffolds. Along our hypothesis, light backscattering and attenuation in agarose were dependent on collagen concentration and chondrocyte density. Significant correlations were found between µt and chondrocyte density (ρ = 0.853, p < 0.001) and between µt and collagen concentration (ρ = 0.694, p < 0.001). µb correlated significantly with chondrocyte density (ρ = 0.504, p < 0.001) but not with collagen concentration (ρ = 0.103, p = 0.422) of the scaffold. Thus, quantitation of light backscattering and, especially, attenuation could be valuable when evaluating the integrity of soft tissues, such as articular cartilage with OCT.

Collagen and chondrocyte concentrations control ultrasound scattering in agarose scaffolds

Ultrasound imaging has been proposed for diagnostics of osteoarthritis and cartilage injuries in vivo. However, the specific contribution of chondrocytes and collagen to ultrasound scattering in articular cartilage has not been systematically studied. We investigated the role of these tissue structures by measuring ultrasound scattering in agarose scaffolds with varying collagen and chondrocyte concentrations. Ultrasound catheters with center frequencies of 9 MHz (7.1-11.0 MHz, -6 dB) and 40 MHz (30.1-45.3 MHz, -6 dB) were applied using an intravascular ultrasound device. Ultrasound backscattering quantified in a region of interest starting right below sample surface differed significantly (p < 0.05) with the concentrations of collagen and chondrocytes. An ultrasound frequency of 40 MHz, as compared with 9 MHz, was more sensitive to variations in collagen and chondrocyte concentrations. The present findings may improve diagnostic interpretation of arthroscopic ultrasound imaging and provide information necessary for development of models describing ultrasound propagation within cartilage.

Mapping dynamical mechanical properties of osteonal bone by scanning acoustic microscopy in time-of-flight mode

An important determinant of mechanical properties of bone is Young's modulus and its variation in individual osteons of cortical bone tissue. Its mechanical behavior also depends on deformation rate owing to its visco- or poroelastic properties. We developed a method to measure dynamical mechanical properties of bulk bone tissue at osteonal level based on scanning acoustic microscopy (SAM) using time-of-flight (TOF) measurements in combination with quantitative backscattered electron imaging (qBEI). SAM-TOF yields local sound velocities and qBEI corresponding material densities together providing elastic properties. Osteons (n=55) were measured in three human femoral diaphyseal ground bone sections (∼ 30 µm in thickness). In addition, subchondral bone and mineralized articular cartilage were investigated. The mean mineral contents, the mean sound velocities, and the mean elastic modulus of the osteons ranged from 20 to 26 wt%, from 3,819 to 5,260 m/s, and from 21 to 44 GPa, respectively. There was a strong positive correlation between material density and sound velocity (Pearson's r=0.701; p<0.0001) of the osteons. Sound velocities between cartilage and bone was similar, though material density was higher in cartilage (+4.46%, p<0.0001). These results demonstrate the power of SAM-TOF to estimate dynamic mechanical properties of the bone materials at the osteonal level.

Cervical collagen network remodeling in normal pregnancy and disrupted parturition in Antxr2 deficient mice

The remodeling of the cervix from a rigid barrier into a compliant structure, which dilates to allow for delivery, is a critical process for a successful pregnancy. Changes in the mechanical properties of cervical tissue during remodeling are hypothesized to be related to the types of collagen crosslinks within the tissue. To further understand normal and abnormal cervical remodeling, we quantify the material properties and collagen crosslink density of cervical tissue throughout pregnancy from normal wild-type and Anthrax Toxin Receptor 2 knockout (Antxr2-/-) mice. Antxr2-/- females are known to have a parturition defect, in part, due to an excessive accumulation of extracellular matrix proteins in the cervix, particularly collagen. In this study, we determined the mechanical properties in gestation-timed cervical samples by osmotic loading and measured the density of mature collagen crosslink, pyridinoline (PYD), by liquid chromatography tandem mass spectrometry (LC-MSMS). The equilibrium material response of the tissue to loading was investigated using a hyperelastic material model where the stresses in the material are balanced by the osmotic swelling tendencies of the glycosaminoglycans and the tensile restoring forces of a randomly-oriented crosslinked collagen fiber network. This study shows that the swelling response of the cervical tissue increased with decreasing PYD density in normal remodeling. In the Antxr2-/- mice, there was no significant increase in swelling volume or significant decrease in crosslink density with advancing gestation. By comparing the ECM-mechanical response relationships in normal and disrupted parturition mouse models this study shows that a reduction of collagen crosslink density is related to cervical softening and contributes to the cervical remodeling process.

Altered mechano-chemical environment in hip articular cartilage: effect of obesity

The production of extracellular matrix (ECM) components of articular cartilage is regulated, among other factors, by an intercellular signaling mechanism mediated by the interaction of cell surface receptors (CSR) with insulin-like growth factor-1 (IGF-1). In ECM, the presence of binding proteins (IGFBP) hinders IGF-1 delivery to CSR. It has been reported that levels of IGF-1 and IGFBP in obese population are, respectively, lower and higher than those found in normal population. In this study, an experimental-numerical approach was adopted to quantify the effect of this metabolic alteration found in obese population on the homeostasis of femoral hip cartilage. A new computational model, based on the mechano-electrochemical mixture theory, was developed to describe competitive binding kinetics of IGF-1 with IGFBP and CSR, and associated glycosaminoglycan (GAG) biosynthesis. Moreover, a gait analysis was carried out on obese and normal subjects to experimentally characterize mechanical loads on hip cartilage during walking. This information was deployed into the model to account for effects of physiologically relevant tissue deformation on GAG production in ECM. Numerical simulations were performed to compare GAG biosynthesis in femoral hip cartilage of normal and obese subjects. Results indicated that the lower ratio of IGF-1 to IGFBP found in obese population reduces cartilage GAG concentration up to 18 % when compared to normal population. Moreover, moderate physical activity, such as walking, has a modest beneficial effect on GAG production. The findings of this study suggest that IGF-1/IGFBP metabolic unbalance should be accounted for when considering the association of obesity with hip osteoarthritis.

A novel method for single sample multi-axial nanoindentation of hydrated heterogeneous tissues based on testing great white shark jaws

Nanomechanical testing methods that are suitable for a range of hydrated tissues are crucial for understanding biological systems. Nanoindentation of tissues can provide valuable insights into biology, tissue engineering and biomimetic design. However, testing hydrated biological samples still remains a significant challenge. Shark jaw cartilage is an ideal substrate for developing a method to test hydrated tissues because it is a unique heterogeneous composite of both mineralized (hard) and non-mineralized (soft) layers and possesses a jaw geometry that is challenging to test mechanically. The aim of this study is to develop a novel method for obtaining multidirectional nanomechanical properties for both layers of jaw cartilage from a single sample, taken from the great white shark (Carcharodon carcharias). A method for obtaining multidirectional data from a single sample is necessary for examining tissue mechanics in this shark because it is a protected species and hence samples may be difficult to obtain. Results show that this method maintains hydration of samples that would otherwise rapidly dehydrate. Our study is the first analysis of nanomechanical properties of great white shark jaw cartilage. Variation in nanomechanical properties were detected in different orthogonal directions for both layers of jaw cartilage in this species. The data further suggest that the mineralized layer of shark jaw cartilage is less stiff than previously posited. Our method allows multidirectional nanomechanical properties to be obtained from a single, small, hydrated heterogeneous sample. Our technique is therefore suitable for use when specimens are rare, valuable or limited in quantity, such as samples obtained from endangered species or pathological tissues. We also outline a method for tip-to-optic calibration that facilitates nanoindentation of soft biological tissues. Our technique may help address the critical need for a nanomechanical testing method that is applicable to a variety of hydrated biological materials whether soft or hard.

Preparation and characterization of macromolecule cross-linked collagen hydrogels for chondrocyte delivery

Collagen hydrogels are widely used in cartilage tissue engineering for their mimicked chondrogenic environment. Due to the rapid degradation nature and weak mechanical property, collagen hydrogels are often cross-linked in application. In this work, collagen hydrogels were soaked into oxidized alginate solution which used as macromolecular cross-linker to prepare the cross-linked hydrogels. Soaking method could retain the self-assemble property of collagen and also bring in a cross-linking network. The compressive modulus and degradation properties of collagen hydrogels were ameliorated after cross-linked, and chondrocytes encapsulated in the cross-linked hydrogels proliferated well and maintained the cell phenotype. This study implied that collagen hydrogels cross-linked by oxidized alginate may have a great potential for application in cartilage tissue engineering.

A compositional analysis of cadaveric human nasal septal cartilage

OBJECTIVES/HYPOTHESIS

To localize quantitatively the major biochemical constituents of native adult human septal cartilage across whole septa.

STUDY DESIGN

Prospective, basic science.

METHODS

The nasal septa from seven cadavers were partitioned into 24 separate regions: six from caudal to cephalic and four from dorsal to ventral. Biochemical assays were used to determine the quantities, relative to wet weight, of the major constituents of cartilage: chondrocytes, collagen, and sulfated glycosaminoglycan.

RESULTS

On average, each milligram of wet cartilage contained 24,900 cells, 73.9 μg collagen, and 17.1 μg sulfated glycosaminoglycan. Cell number showed no significant variation across the septa. In contrast, the caudal regions of the septa were associated with higher levels of collagen, the ventral regions correlated with higher levels of sulfated glycosaminoglycan, and the dorsal regions were associated with an elevated ratio of collagen to sulfated glycosaminoglycan.

CONCLUSIONS

This study represents the first characterization of the biochemical composition of native human septal cartilage across whole septa. Quantities of collagen and sulfated glycosaminoglycan showed region-specific variation across the septum. The localized pattern of collagen and sulfated glycosaminoglycan deposition are consistent with the significance of preserving the L-strut during rhinoplasty and other nasal reconstructive procedures. In addition, it may assist in defining design goals for tissue-engineered septal neocartilage constructs to meet specific reconstructive needs in the future.

Tissue-engineered articular cartilage exhibits tension-compression nonlinearity reminiscent of the native cartilage

The tensile modulus of articular cartilage is much larger than its compressive modulus. This tension-compression nonlinearity enhances interstitial fluid pressurization and decreases the frictional coefficient. The current set of studies examines the tensile and compressive properties of cylindrical chondrocyte-seeded agarose constructs over different developmental stages through a novel method that combines osmotic loading, video microscopy, and uniaxial unconfined compression testing. This method was previously used to examine tension-compression nonlinearity in native cartilage. Engineered cartilage, cultured under free-swelling (FS) or dynamically loaded (DL) conditions, was tested in unconfined compression in hypertonic and hypotonic salt solutions. The apparent equilibrium modulus decreased with increasing salt concentration, indicating that increasing the bath solution osmolarity shielded the fixed charges within the tissue, shifting the measured moduli along the tension-compression curve and revealing the intrinsic properties of the tissue. With this method, we were able to measure the tensile (401±83kPa for FS and 678±473kPa for DL) and compressive (161±33kPa for FS and 348±203kPa for DL) moduli of the same engineered cartilage specimens. These moduli are comparable to values obtained from traditional methods, validating this technique for measuring the tensile and compressive properties of hydrogel-based constructs. This study shows that engineered cartilage exhibits tension-compression nonlinearity reminiscent of the native tissue, and that dynamic deformational loading can yield significantly higher tensile properties.

Superficial collagen fibril modulus and pericellular fixed charge density modulate chondrocyte volumetric behaviour in early osteoarthritis

The aim of this study was to investigate if the experimentally detected altered chondrocyte volumetric behavior in early osteoarthritis can be explained by changes in the extracellular and pericellular matrix properties of cartilage. Based on our own experimental tests and the literature, the structural and mechanical parameters for normal and osteoarthritic cartilage were implemented into a multiscale fibril-reinforced poroelastic swelling model. Model simulations were compared with experimentally observed cell volume changes in mechanically loaded cartilage, obtained from anterior cruciate ligament transected rabbit knees. We found that the cell volume increased by 7% in the osteoarthritic cartilage model following mechanical loading of the tissue. In contrast, the cell volume decreased by 4% in normal cartilage model. These findings were consistent with the experimental results. Increased local transversal tissue strain due to the reduced collagen fibril stiffness accompanied with the reduced fixed charge density of the pericellular matrix could increase the cell volume up to 12%. These findings suggest that the increase in the cell volume in mechanically loaded osteoarthritic cartilage is primarily explained by the reduction in the pericellular fixed charge density, while the superficial collagen fibril stiffness is suggested to contribute secondarily to the cell volume behavior.

Interstitial growth and remodeling of biological tissues: tissue composition as state variables

Growth and remodeling of biological tissues involves mass exchanges between soluble building blocks in the tissue's interstitial fluid and the various constituents of cells and the extracellular matrix. As the content of these various constituents evolves with growth, associated material properties, such as the elastic modulus of the extracellular matrix, may similarly evolve. Therefore, growth theories may be formulated by accounting for the evolution of tissue composition over time in response to various biological and mechanical triggers. This approach has been the foundation of classical bone remodeling theories that successfully describe Wolff's law by establishing a dependence between Young's modulus and bone apparent density and by formulating a constitutive relation between bone mass supply and the state of strain. The goal of this study is to demonstrate that adding tissue composition as state variables in the constitutive relations governing the stress-strain response and the mass supply represents a very general and straightforward method to model interstitial growth and remodeling in a wide variety of biological tissues. The foundation for this approach is rooted in the framework of mixture theory, which models the tissue as a mixture of multiple solid and fluid constituents. A further generalization is to allow each solid constituent in a constrained solid mixture to have its own reference (stress-free) configuration. Several illustrations are provided, ranging from bone remodeling to cartilage tissue engineering and cervical remodeling during pregnancy.

A copper sulfate and hydroxylysine treatment regimen for enhancing collagen cross-linking and biomechanical properties in engineered neocartilage

The objective of this study was to improve the biomechanical properties of engineered neotissues through promoting the development of collagen cross-links. It was hypothesized that supplementing medium with copper sulfate and the amino acid hydroxylysine would enhance the activity of lysyl oxidase enzyme to form collagen cross-links, increasing the strength and integrity of the neotissue. Neocartilage constructs were generated using a scaffoldless, self-assembling process and treated with copper sulfate and hydroxylysine, either alone or in combination, following a 2-factor, full-factorial study design. Following a 6-wk culture period, the biomechanical and biochemical properties of the constructs were measured. Results found copper sulfate to significantly increase pyridinoline (PYR) cross-links in all copper sulfate-containing groups over controls. When copper sulfate and hydroxylysine were combined, the result was synergistic, with a 10-fold increase in PYR content over controls. This increase in PYR cross-links manifested in a 3.3-fold significant increase in the tensile properties of the copper sulfate + hydroxylysine group. In addition, an 123% increase over control values was detected in the copper sulfate group in terms of the aggregate modulus. These data elucidate the role of copper sulfate and hydroxylysine toward improving the biomechanical properties of neotissues through collagen cross-linking enhancement.

A needle micro-osmometer for determination of glycosaminoglycan concentration in excised nucleus pulposus tissue

PURPOSE

Aggrecan is one of the major macromolecular components of the intervertebral disc (IVD) and its loss is an early sign of degeneration. Restoration of aggrecan, and hence of biomechanical properties, is a major objective of biological therapies. At present, assessment of aggrecan concentration via its glycosaminoglycan (GAG) content is accomplished using biochemical and histological methods which require sacrifice of tissue. A minimally invasive method for assessing GAG, and hence aggrecan, which can avoid destruction of tissue, would be of benefit.

METHODS

We have developed a needle micro-osmometer that is capable of measuring flux of saline into excised human nucleus pulposus (NP) tissue. Using the isotropic osmotic stress technique to assess the swelling pressure of the excised NP tissue and assuming negligible collagen tensile stress, we were able to relate the flux to the tissue fixed charge density (FCD). GAG concentration is evaluated from its FCD via the radioactive tracer technique. Samples representing different ages (28-59 years) and degeneration grades (1-4) were analyzed.

RESULTS

The flux is controlled by both the osmotic pressure difference across the probe's semi-permeable membrane and by the tissue permeability. A linear correlation was found between flux and the tissue FCD. The equation describing the linear fit is FCD/(total tissue hydration) = 1.97 × 10(-4) + 8283 × flux (R = 0.836, p < 10(-4)). Thus, by measuring saline flux, the concentration of GAG can be determined.

CONCLUSIONS

Micro-osmometry provides a reliable and minimally invasive tool for assessing GAG content in excised NP tissue. This method may be usefully applied in tissue engineering applications. It may also be useful for in vivo measurements if the question of the degenerative effect of needle puncture can be overcome.

Aging behavior of PVA hydrogels for soft tissue applications after in vitro swelling using osmotic pressure solutions

The osmotic pressure of the medium used for in vitro swelling evaluation has been shown to have a significant effect on the swelling behavior of a material. In this study, the effect of osmotic pressure during swelling on poly(vinyl alcohol) hydrogel material properties was evaluated in vitro. Osmotic pressure solutions are necessary in order to mimic the swelling pressure observed in vivo for soft tissues present in load-bearing joints. Hydrogels were characterized after swelling by mechanical testing, X-ray diffraction and optical microscopy in the hydrated state. Results indicated that hydrogel mechanical properties remained tailorable with respect to initial processing parameters; however, significant aging occurred in osmotic solution. This was observed when evaluating the mechanical properties of the hydrogels, which, before swelling, ranged from 0.04 to 0.78 MPa but, after swelling in vitro using osmotic pressure solution, ranged from 0.32 to 0.93 MPa. Significant aging was also noted when evaluating crystallinity, with the relative crystallinity ranging between 0.4 and 5.0% before swelling and between 6.5 nd 8.0% after swelling. When compared to swelling in a non-osmotic pressure solution or in phosphate-buffered saline solution, the mechanical properties were more dependent upon the final swelling content. Furthermore, increases in crystallinity were not as significant after swelling. These results highlight the importance of choosing the appropriate swelling medium for in vitro characterization based on the desired application.

System-level biomechanical approach for the evaluation of term and preterm pregnancy maintenance

Preterm birth is the primary contributor to perinatal morbidity and mortality, with those born prior to 32 weeks disproportionately contributing compared to those born at 32-37 weeks. Outcomes for babies born prematurely can be devastating. Parturition is recognized as a mechanical process that involves the two processes that are required to initiate labor: rhythmic myometrial contractions and cervical remodeling with subsequent dilation. Studies of parturition tend to separate these two processes rather than evaluate them as a unified system. The mechanical property characterization of the cervix has been primarily performed on isolated cervical tissue, with an implied understanding of the contribution from the uterine corpus. Few studies have evaluated the function of the uterine corpus in the absence of myometrial contractions or in relationship to retaining the fetus. Therefore, the cervical-uterine interaction has largely been neglected in the literature. We suggest that a system-level biomechanical approach is needed to understand pregnancy maintenance. To that end, this paper has two main goals. One goal is to highlight the gaps in current knowledge that need to be addressed in order to develop any comprehensive and clinically relevant models of the system. The second goal is to illustrate the utility of finite element models in understanding pregnancy maintenance of the cervical-uterine system. The paper targets an audience that includes the reproductive biologist/clinician and the engineer/physical scientist interested in biomechanics and the system level behavior of tissues.

Transport of anti-IL-6 antigen binding fragments into cartilage and the effects of injury

The efficacy of biological therapeutics against cartilage degradation in osteoarthritis is restricted by the limited transport of macromolecules through the dense, avascular extracellular matrix. The availability of biologics to cell surface and matrix targets is limited by steric hindrance of the matrix, and the microstructure of matrix itself can be dramatically altered by joint injury and the subsequent inflammatory response. We studied the transport into cartilage of a 48 kDa anti-IL-6 antigen binding fragment (Fab) using an in vitro model of joint injury to quantify the transport of Fab fragments into normal and mechanically injured cartilage. The anti-IL-6 Fab was able to diffuse throughout the depth of the tissue, suggesting that Fab fragments can have the desired property of achieving local delivery to targets within cartilage, unlike full-sized antibodies which are too large to penetrate beyond the cartilage surface. Uptake of the anti-IL-6 Fab was significantly increased following mechanical injury, and an additional increase in uptake was observed in response to combined treatment with TNFα and mechanical injury, a model used to mimic the inflammatory response following joint injury. These results suggest that joint trauma leading to cartilage degradation can further alter the transport of such therapeutics and similar-sized macromolecules.

Cartilage collagen damage in hip osteoarthritis similar to that seen in knee osteoarthritis; a case-control study of relationship between collagen, glycosaminoglycan and cartilage swelling

Background

It remains to be shown whether OA shares molecular similarities between different joints in humans. This study provides evidence for similarities in cartilage molecular damage in osteoarthritic (OA) joints.

Methods

Articular cartilage from osteoarthritic hip joints were analysed and compared to non-OA controls regarding collagen, glycosaminoglycan and water content. Femoral heads from 16 osteoarthritic (OA) and 20 reference patients were obtained from hip replacement surgery due to OA and femoral neck fracture, respectively. Cartilage histological changes were assessed by Mankin grading and denatured collagen type II immunostaining and cartilage was extracted by α-chymotrypsin. Hydroxyproline and Alcian blue binding assays were used to measure collagen and glycosaminoglycan (GAG) content, respectively.

Results

Mankin and immunohistology scores were significantly higher in hip OA samples than in reference samples. Cartilage water content was 6% higher in OA samples than in references. 2.5 times more collagen was extracted from OA than from reference samples. There was a positive association between water content and percentage of extractable collagen pool (ECP) in both groups. The amounts of collagen per wet and dry weights did not differ statistically between OA and reference cartilage. % Extractable collagen was not related to collagen per dry weight in either group. However when collagen was expressed by wet weight there was a negative correlation between % extractable and collagen in OA cartilage. The amount of GAG per wet weight was similar in both groups but the amount of GAG per dry weight was higher in OA samples compared to reference samples, which suggests a capacity for GAG biosynthesis in hip OA cartilage. Neither of the studied parameters was related to age in either group.

Conclusions

Increased collagen extractability and water content in human hip cartilage is associated with OA pathology and can be observed at early stages of the degenerative hip OA process. Our results suggest a common degradative pathway of collagen in articular cartilage of different joints. Furthermore, the study suggests that biochemical changes precede more overt OA changes and that chondrocytes may have a capability to compensate molecular loss in the early phase of OA.

Load-unloading response of intact and artificially degraded articular cartilage correlated with near infrared (NIR) absorption spectra

The conventional mechanical properties of articular cartilage, such as compressive stiffness, have been demonstrated to be limited in their capacity to distinguish intact (visually normal) from degraded cartilage samples. In this paper, we explore the correlation between a new mechanical parameter, namely the reswelling of articular cartilage following unloading from a given compressive load, and the near infrared (NIR) spectrum. The capacity to distinguish mechanically intact from proteoglycan-depleted tissue relative to the "reswelling" characteristic was first established, and the result was subsequently correlated with the NIR spectral data of the respective tissue samples. To achieve this, normal intact and enzymatically degraded samples were subjected to both NIR probing and mechanical compression based on a load-unload-reswelling protocol. The parameter δr, characteristic of the osmotic "reswelling" of the matrix after unloading to a constant small load in the order of the osmotic pressure of cartilage, was obtained for the different sample types. Multivariate statistics was employed to determine the degree of correlation between δr and the NIR absorption spectrum of relevant specimens using Partial Least Squared (PLS) regression. The results show a strong relationship (R(2)=95.89%, p<0.0001) between the spectral data and δr. This correlation of δr with NIR spectral data suggests the potential for determining the reswelling characteristics non-destructively. It was also observed that δr values bear a significant relationship with the cartilage matrix integrity, indicated by its proteoglycan content, and can therefore differentiate between normal and artificially degraded proteoglycan-depleted cartilage samples. It is therefore argued that the reswelling of cartilage, which is both biochemical (osmotic) and mechanical (hydrostatic pressure) in origin, could be a strong candidate for characterizing the tissue, especially in regions surrounding focal cartilage defects in joints.

Interactions of Cartilage Extracellular Matrix Macromolecules

Articular cartilage is a low-friction, load-bearing tissue located at joint surfaces. The extracellular matrix (ECM) of cartilage consists of a fibrous collagen network, which is pre-stressed by the osmotic swelling pressure exerted by negatively charged proteoglycan aggregates embedded in the collagen network. The major proteoglycan is the bottlebrush shaped aggrecan, which forms complexes with linear hyaluronic acid chains. We quantify microscopic and macroscopic changes resulting from self-assembly between aggrecan and hyaluronic acid using a complementary set of physical measurements to determine structure and interactions by combining scattering techniques, including small-angle X-ray scattering, small-angle neutron scattering, and dynamic light scattering with macroscopic osmotic pressure measurements. It is demonstrated that the osmotic pressure that defines the load bearing ability of cartilage is primarily governed by the main macromolecular components (aggrecan and collagen) of the ECM. Knowledge of the interactions between the macromolecular components of cartilage ECM is essential to understand biological function and to develop successful tissue engineering strategies for cartilage repair.

Influence of tissue- and cell-scale extracellular matrix distribution on the mechanical properties of tissue-engineered cartilage

The insufficient load-bearing capacity of today's tissue- engineered (TE) cartilage limits its clinical application. Generally, cartilage TE studies aim to increase the extracellular matrix (ECM) content, as this is thought to determine the load-bearing properties of the cartilage. However, there are apparent inconsistencies in the literature regarding the correlation between ECM content and mechanical properties of TE constructs. In addition to the amount of ECM, the spatial inhomogeneities in ECM distribution at the tissue scale as well as at the cell scale may affect the mechanical properties of TE cartilage. The relative importance of such structural inhomogeneities on mechanical behavior of TE cartilage is unknown. The aim of the present study was, therefore, to theoretically elucidate the influence of these inhomogeneities on the mechanical behavior of chondrocyte-agarose TE constructs. A validated non-linear fiber-reinforced poro-elastic swelling cartilage model that can accommodate for effects of collagen reinforcement and swelling by proteoglycans was used. At the tissue scale, ECM was gradually varied from predominantly localized in the periphery of the TE construct toward an ECM-rich inner core. The effect of these inhomogeneities in relation to the total amount of ECM was also evaluated. At the cell scale, ECM was gradually varied from localized in the pericellular area, toward equally distributed throughout the interterritorial area. Results from the tissue-scale model indicated that localization of ECM in either the construct periphery or in the inner core may reduce construct stiffness compared with that of constructs with homogeneous ECM. Such effects are more significant at high ECM amounts. At the cell scale, localization of ECM around the cells significantly reduced the overall stiffness, even at low ECM amounts. The compressive stiffness gradually increased when ECM distribution became more homogeneous and the osmotic swelling pressure in the interterritorial area increased. We conclude that for the same amount of ECM content in TE cartilage constructs, superior mechanical properties can be achieved with more homogeneous ECM distribution at both tissue and cell scale. Inhomogeneities at the cell scale are more important than those at the tissue scale.

The role of integrin degradation in post-mortem drip loss in pork

Cell membranes are attached to the cell body by two major types of adhesion complexes, integrin-containing focal adhesions and the dystrophin/dystroglycan complex of proteins. In this study, we used samples with known and varying rates of drip channel formation to determine whether the time frame of formation of the channels correlated with the rate of cell/membrane adhesion protein degradation. Our results indicate that the degradation of the β1-chain of integrin, the portion of the protein involved in adhesion of the cell membrane to the cytoskeleton, temporally correlates to the opening of drip channels in pork, while dystrophin degradation does not. Additionally, this degradation may be due to activation of calpains at the site of adhesion plaques. Previous work has indicated that calpains can degrade the β-chain of integrins in vitro. We find that m-calpain is co-localized with β1-integrin at the cytoplasmic surface of the cell membrane in plaque-like structures and is active in these regions post-mortem. Inhibition of calpains not only results in inhibition of integrin degradation, but blocks the opening of drip channels. Therefore, the opening of drip channels in pork may well be due to the degradation of integrin proteins on the cell surface by calpains.

Compaction enhances extracellular matrix content and mechanical properties of tissue-engineered cartilaginous constructs

Many cell-based tissue-engineered cartilaginous constructs are mechanically softer than native tissue and have low content and abnormal proportions of extracellular matrix (ECM) constituents. We hypothesized that the load-bearing mechanical properties of cartilaginous constructs improve with the inclusion of collagen (COL) and proteoglycan (PG) during assembly. The objectives of this work were to determine (1) the effect of addition of PG, COL, or COL+PG on compressive properties of 2% agarose constructs and (2) the ability of mechanical compaction to concentrate matrix content and improve the compressive properties of such constructs. The inclusion of COL+PG improved the compressive properties of hydrogel constructs compared with PG or COL alone. Mechanical compaction increased the PG and COL concentrations in and compressive stiffness of the constructs. Chondrocytes included in the constructs maintained high viability after compaction. These results support the concepts that the assembly of cartilaginous constructs with COL+PG and application of mechanical compaction enhance the ECM content and compressive properties of engineered cartilaginous constructs.

Synthesis and characterization of an aggrecan mimic

Aggrecan (AGG) is a large, aggregating proteoglycan present throughout the body, but predominantly found in articular cartilage. The principle features of AGG, its hyaluronan (HA) binding domain and its abundance of covalently attached glycosaminoglycans (GAGs), make it an essential component of the functional ability of articular cartilage. Current tissue engineering constructs have attempted to stimulate AGG production, but have been unable to produce adequate amounts of mature AGG, and hence have suffered a mismatch in mechanical properties. To address these deficiencies, an AGG mimic was synthesized to match AGG functional properties and provide greater control within tissue engineering constructs. Chondroitin sulfate was functionalized with HA-specific binding peptides to replicate both the GAG presence and HA-binding ability of AGG, respectively. Upon characterization and testing, the mimic was able to effectively bind to HA, increase the compressive strength of cartilage extracellular matrix-based constructs, and protect the other extracellular matrix (ECM) components from degradation, replicating the important functions of AGG. In particular, the mimic produced a 78% increase in compressive strength of the ECM-based constructs, and was able to significantly reduce the degradation of both HA and collagen. The initial characterization of the newly synthesized AGG mimic demonstrates its potential in tissue engineering constructs, and provides an essential basis for more explorative studies of the AGG mimic's abilities as an AGG substitute and beyond.

Osmotic swelling and residual stress in cardiovascular tissues

Osmotic swelling (OS) and residual stress (RS) significantly affect the function of cardiovascular (CVS) tissues and organs. The physical mechanisms of OS and RS are reviewed and analyzed with focus on the theoretical background and related experimental evidence. It will be shown that swelling of CVS tissues stems from the presence of charged proteoglycan macro-molecules in these tissues, and that this swelling is a key determinant of RS. In view of OS and RS functional significance in mechanical function, modeling attempts which incorporate them in CVS stress analysis will be presented and discussed.

Aggrecan, an unusual polyelectrolyte: review of solution behavior and physiological implications

Aggrecan is a high-molecular-weight, bottlebrush-shaped, negatively charged biopolymer that forms supermolecular complexes with hyaluronic acid. In the extracellular matrix of cartilage, aggrecan-hyaluronic acid complexes are interspersed in a collagen meshwork and provide the osmotic properties required to resist deswelling under compressive load. In this review we compile aggrecan solution behavior from different experimental techniques, and discuss them in the context of concentration regimes that were identified in osmotic pressure experiments. At low concentrations, aggrecan exhibits microgel-like behavior. With increasing concentration, the bottlebrushes self-assemble into large complexes. In the physiological concentration range (2<c(aggrecan)<8% w/w), the physical properties of the solution are dominated by repulsive electrostatic interactions between aggrecan complexes. We discuss the consequences of the bottlebrush architecture on the polyelectrolyte characteristics of the aggrecan molecule, and its implications for cartilage properties and function.

Contribution of proteoglycan osmotic swelling pressure to the compressive properties of articular cartilage

The negatively charged proteoglycans (PG) provide compressive resistance to articular cartilage by means of their fixed charge density (FCD) and high osmotic pressure (π(PG)), and the collagen network (CN) provides the restraining forces to counterbalance π(PG). Our objectives in this work were to: 1), account for collagen intrafibrillar water when transforming biochemical measurements into a FCD-π(PG) relationship; 2), compute π(PG) and CN contributions to the compressive behavior of full-thickness cartilage during bovine growth (fetal, calf, and adult) and human adult aging (young and old); and 3), predict the effect of depth from the articular surface on π(PG) in human aging. Extrafibrillar FCD (FCD(EF)) and π(PG) increased with bovine growth due to an increase in CN concentration, whereas PG concentration was steady. This maturation-related increase was amplified by compression. With normal human aging, FCD(EF) and π(PG) decreased. The π(PG)-values were close to equilibrium stress (σ(EQ)) in all bovine and young human cartilage, but were only approximately half of σ(EQ) in old human cartilage. Depth-related variations in the strain, FCD(EF), π(PG), and CN stress profiles in human cartilage suggested a functional deterioration of the superficial layer with aging. These results suggest the utility of the FCD-π(PG) relationship for elucidating the contribution of matrix macromolecules to the biomechanical properties of cartilage.

Oxidative stress in secondary osteoarthritis: from cartilage destruction to clinical presentation?

Due to an increasing life expectance, osteoarthritis (OA) is one of the most common chronic diseases. Although strong efforts have been made to regenerate degenerated joint cartilage, OA is a progressive and irreversible disease up to date. Among other factors the dysbalance between free radical burden and cellular scavenging mechanisms defined as oxidative stress is a relevant part of OA pathogenesis. Here, only little data are available about the mediation and interaction between different joint compartments. The article provides a review of the current literature regarding the influence of oxidative stress on cellular aging, senescence and apoptosis in different joint compartments (cartilage, synovial tissue and subchondral bone). Free radical exposure is known to promote cellular senescence and apoptosis. Radical oxygen species (ROS) involvement in inflammation, fibrosis control and pain nociception has been proven. The data from literature indicates a link between free radical burden and OA pathogenesis mediating local tissue reactions between the joint compartments. Hence, oxidative stress is likely not only to promote cartilage destruction but also to be involved in inflammative transformation, promoting the transition from clinically silent cartilage destruction to apparent OA. ROS induced by exogenous factors such as overload, trauma, local intraarticular lesion and consecutive synovial inflammation cause cartilage degradation. In the affected joint, free radicals mediate disease progression. The interrelationship between oxidative stress and OA etiology might provide a novel approach to the comprehension and therefore modification of disease progression and symptom control.

Body fluid dynamics: back to the future

Pioneering investigations conducted over a half century ago on tonicity, transcapillary fluid exchange, and the distribution of water and solute serve as a foundation for understanding the physiology of body fluid spaces. With passage of time, however, some of these concepts have lost their connectivity to more contemporary information. Here we examine the physical forces determining the compartmentalization of body fluid and its movement across capillary and cell membrane barriers, drawing particular attention to the interstitium operating as a dynamic interface for water and solute distribution rather than as a static reservoir. Newer work now supports an evolving model of body fluid dynamics that integrates exchangeable Na(+) stores and transcapillary dynamics with advances in interstitial matrix biology.

Extra-fibrillar matrix mechanics of annulus fibrosus in tension and compression

The annulus fibrosus (AF) of the disk is a highly nonlinear and anisotropic material that undergoes a complex combination of loads in multiple orientations. The tensile mechanical behavior of AF in the lamellar plane is dominated by collagen fibers and has been accurately modeled using exponential functions. On the other hand, AF mechanics perpendicular to the lamella, in the radial direction, depend on the properties of the ground matrix with little to no fiber contribution. The ground matrix is mainly composed of proteoglycans (PG), which are negatively charged macromolecules that maintain the tissue hydration via osmotic pressure. The mechanical response of the ground matrix can be divided in the contribution of osmotic pressure and an elastic solid part known as extra-fibrillar matrix (EFM). Mechanical properties of the ground matrix have been measured using tensile and confined compression tests. However, EFM mechanics have not been measured directly. The objective of this study was to measure AF nonlinear mechanics of the EFM in tension and compression. To accomplish this, a combination of osmotic swelling and confined compression in disk radial direction, perpendicular to the lamella, was used. For this type of analysis, it was necessary to define a stress-free reference configuration. Thus, a brief analysis on residual stress in the disk and a procedure to estimate the reference configuration are presented. The proposed method was able to predict similar swelling deformations when using different loading protocols and models for the EFM, demonstrating its robustness. The stress-stretch curve of the EFM was linear in the range 0.9 < λ₃ < 1.3 with an aggregate modulus of 10.18±3.32 kPa; however, a significant nonlinearity was observed for compression below 0.8. The contribution of the EFM to the total aggregate modulus of the AF decreased from 70 to 30% for an applied compression of 50% of the initial thickness. The properties obtained in this study are essential for constitutive and finite element models of the AF and disk and can be applied to differentiate between functional degeneration effects such as PG loss and stiffening due to cross-linking.

Physiology and pathophysiology of nitrosative and oxidative stress in osteoarthritic joint destruction

Osteoarthritis (OA) is one of the most common chronic diseases, with increasing importance due to increased life expectancy. On a cellular level, the pathophysiology of joint function impairment and ultimate destruction associated with OA remains poorly understood. Free radicals are highly reactive molecules involved in both normal intracellular signal transduction and degenerative cellular processes. An imbalance between the free radical burden and cellular scavenging mechanisms, defined as oxidative stress, has been identified as a relevant factor in OA pathogenesis. This literature review elucidates the involvement of nitrosative and oxidative stress in cellular ageing in joints, cell senescence, and apoptosis. Free radical exposure is known to promote cellular senescence and apoptosis, and the involvement of radical oxygen species (ROS) in inflammation, fibrosis control, and pain nociception has been proven. A relatively novel approach to OA pathophysiology considers the joint to be a dynamic system consisting of 3, continuously interacting compartments, cartilage, synovial tissue, and subchondral bone. Current knowledge concerning free radical involvement in paracrine signalling in OA is reviewed. The interrelationship between oxidative imbalances and OA pathophysiology may provide a novel approach to the comprehension, and therefore modification, of OA disease progression and symptom control.

Analysis of the in vitro swelling behavior of poly(vinyl alcohol) hydrogels in osmotic pressure solution for soft tissue replacement

An osmotic solution was used to evaluate poly(vinyl alcohol) (PVA) hydrogels as potential non-degradable soft tissue replacements in vitro. Osmotic solutions are necessary in order to mimic the swelling pressure observed in vivo for soft tissues present in load-bearing joints. In vitro studies indicated that PVA hydrogels experience minimal changes in swelling with a polymer concentration of 20 wt.% PVA in phosphate-buffered saline solution (0 atm) and between 30 and 35 wt.% PVA in osmotic solution with a pressure of 0.95 atm. Swelling in osmotic pressure solutions caused decreases in the equilibrium hydrogel hydration. An investigation of hydrogel compressive modulus indicated that PVA hydrogels are within the range of articular cartilage, meniscal tissue, and the temporomandibular joint disk. Furthermore, it is possible to tailor PVA hydrogels through careful modification of the polymer concentration and freeze-thaw cycles during hydrogel preparation to match both a desired swelling ratio and a desired compressive modulus or porosity. The microstructure of the PVA hydrogels was also evaluated as a function of freeze-thaw cycles and polymer concentration to give an insight into the processes occurring during synthesis and swelling in osmotic solutions.

3D non-affine finite strains measured in isolated bovine annulus fibrosus tissue samples

Understanding of the mechanics of disc tissue calls for measurement of strains in physiological conditions. Because the intervertebral disc is gripped between two vertebrae, the swelling is constrained in vivo, resulting in a intradiscal pressure of 0.1-0.2 MPa in supine position. The excision of isolated disc tissue samples results often in non-physiological swelling. The purpose of the present study is to measure 3D finite strains in isolated bovine disc tissue specimens under physiological osmolarity and pressure, particularly around discontinuities of the collagen network. The collagen is stained by means of CNA35 probe, and the (dead) cells are stained by means of propidium iodide. The tissue is observed under confocal microscopy, under an externally applied pressure generated by a PEG solution. The 3D finite strains are obtained through correlation of the texture of the 3D images. The correlation technique yields principal strains in all areas except within collagen-free areas. The deformation is strongly non-affine. Especially around discontinuities, the strain field is non-homogeneous. Macroscopic strains as computed from finite element analysis of whole discs are insufficient to predict microstrains around clefts or cells. Because of the small number of specimens, the present results should be considered preliminary.

Real-time electro-mechano-acoustic imaging for monitoring interactions between trypsin and different inhibitors in articular cartilage

The purpose of this study was to observe the real-time interactions between trypsin and various inhibitors in articular cartilage in vitro using a novel electro-mechano-acoustic imaging method. Monitored in real-time, articular cartilage specimens from bovine patellae were first treated with trypsin to reach half proteoglycan depletion (Phase I), then the trypsin solution was replaced with (i) physiological saline buffer (PS), (ii) fetal bovine serum (FBS), (iii) protease inhibitor cocktail (PI) and (iv) 10% formalin (F), respectively, to observe their effects on residual digestion (Phase II). Ultrasound radio frequency signals from the articular cartilage were used to form a M-mode image, where the interface between trypsin digested and intact cartilage tissues could be observed with an additional echo generated. The inhibition time, the digestion depth and digestion fraction were measured for each specimen. The results showed that the dilution of trypsin using saline solution was not sufficient to stop the enzyme action instantly. Although groups FBS and PI had a similar inhibition time of approximately 1.5 h, their digestion depth was obviously different (0.25±0.03 and 0.06±0.06 mm, respectively). In contrast, formalin only took <30 min to stop the trypsin digestion with almost no further digestion. The results demonstrated that the current system was capable of monitoring the trypsin digestion and inhibition process in real time. Also, different chemicals affected the residual trypsin digestion to different degrees.

A viscoelastic chitosan-modified three-dimensional porous poly(L-lactide-co-ε-caprolactone) scaffold for cartilage tissue engineering

Biomaterials have been playing important roles in cartilage regeneration. Although many scaffolds have been reported to enhance cartilage regeneration, none of the scaffolds available are optimal regarding mechanical properties, integration with host cartilage and providing proper micro-environment for chondrocyte attachment, proliferation and differentiation. In the current study, chitosan-modified poly(L-lactide-co-ε-caprolactone) (PLCL) scaffolds were fabricated to simulate the main biochemical components of cartilage, as well as their interaction with the aim to endow them with viscoelasticity similar to native cartilage. Porous PLCL scaffolds were fabricated with porogen-leaching, freeze-extraction and freeze-gelation before chitosan was cross-linked. The acquired porous scaffolds had pore sizes ranging from 200 to 500 μm and about 85% porosity with good interconnection between individual pores. Chitosan was successfully cross-linked to PLCL scaffolds, as validated by ninhydrin staining and X-ray photoelectron spectroscopy (XPS). The viscoelasticity of the scaffolds was similar to that of bovine cartilage and they had a relatively good recovery ratio from compression deformation, while the Young's modulus was one order of magnitude less than cartilage. Not only could the chitosan-modified PLCL scaffolds promote cell adhesion and proliferation, but also they could significantly enhance excretion of aggrecan and type-II collagen, as testified by both histology and quantitative PCR, compared with PLCL scaffolds. With the fabrication of biomimetic scaffolds, it is possible to make scaffolds for cartilage tissue engineering, which are not only biocompatible, but also have mechanical properties similar to native cartilage.

On Mechanics of Connective Tissue: Assessing the Electrostatic Contribution to Corneal Stroma Elasticity

The extracellular matrix plays a crucial role in defining the mechanical properties of connective tissues like cornea, heart, tendon, bone and cartilage among many others. The unique properties of these collagenous tissues arise because of both the hierarchal structure of collagens and the presence of negatively charged proteoglycans (PGs) which hold collagen fibers together. Here, in an effort to understand the mechanics of these structures, using the nonlinear Poison-Boltzmann (PB) equation, we study the electrostatic contribution to the elasticity of corneal stroma due to the presence of negatively charged PG glycosminoglycans (GAGs). Since collagens and GAGs have a regular hexagonal arrangement inside the corneal stroma, a triangular unit cell is chosen. The finite element method is used to solve the PB equation inside this domain and to obtain the electric potential and ionic distributions. Having the ion and potential distributions throughout the unit cell, the electrostatic free energy is computed and the tissue elasticity is calculated using the energy method. It is shown that as the ionic bath concentration increases; the electrostatic contribution to tissue elasticity is reduced.

A human knee joint model considering fluid pressure and fiber orientation in cartilages and menisci

Articular cartilages and menisci are generally considered to be elastic in the published human knee models, and thus the fluid-flow dependent response of the knee has not been explored using finite element analysis. In the present study, the fluid pressure and site-specific collagen fiber orientation in the cartilages and menisci were implemented into a finite element model of the knee using fibril-reinforced modeling previously proposed for articular cartilage. The geometry of the knee was obtained from magnetic resonance imaging of a healthy young male. The bones were considered to be elastic due to their greater stiffness compared to that of the cartilages and menisci. The displacements obtained for fast ramp compression were essentially same as those for instantaneous compression of equal magnitude with the fluid being trapped in the tissues, which was expected. However, a clearly different pattern of displacements was predicted by an elastic model using a greater Young's modulus and a Poisson's ratio for nearly incompressible material. The results indicated the influence of fluid pressure and fiber orientation on the deformation of articular cartilage in the knee. The fluid pressurization in the femoral cartilage was somehow affected by the site-specific fiber directions. The peak fluid pressure in the femoral condyles was reduced by three quarters when no fibril reinforcement was assumed. The present study indicates the necessity of implementing the fluid pressure and anisotropic fibril reinforcement in articular cartilage for a more accurate understanding of the mechanics of the knee.

The role of the cartilage matrix in osteoarthritis

Osteoarthritis (OA) involves all the structures of the joint. How the disease is initiated and what factors trigger the disease process remain unclear, although the mechanical environment seems to have a role. Our understanding of the biology of the disease has been hampered by the lack of access to tissue samples from patients with early stage disease, because clinically recognizable symptoms appear late in the osteoarthritic process. However, new data about the early processes in articular cartilage and new tools to identify the early stages of OA are providing fresh insights into the pathological sequence of events. The progressive destruction of cartilage involves degradation of matrix constituents, and rather active, yet inefficient, repair attempts. The release of fragmented molecules provides opportunities to monitor the disease process in patients, and to investigate whether these fragments are involved in propagating OA, for example, by inducing inflammation. The role of bone has not been fully elucidated, but changes in bone seem to be secondary to alterations in articular cartilage, which change the mechanical environment of the bone cells and induce them, in turn, to modulate tissue structure.

Lysyl oxidase-like-2 (LOXL2) is a major isoform in chondrocytes and is critically required for differentiation

The lysyl oxidase family is made up of five members: lysyl oxidase (LOX) and lysyl oxidase-like 1-4 (LOXL1-LOXL4). All members share conserved C-terminal catalytic domains that provide for lysyl oxidase or lysyl oxidase-like enzyme activity; and more divergent propeptide regions. LOX family enzyme activities catalyze the final enzymatic conversion required for the formation of normal biosynthetic collagen and elastin cross-links. The importance of lysyl oxidase enzyme activity to normal bone development has long been appreciated, but regulation and roles for specific LOX isoforms in bone formation in vivo is largely unexplored. Fracture healing recapitulates aspects of endochondral bone development. The present study first investigated the expression of all LOX isoforms in fracture healing. A remarkable coincidence of LOXL2 expression with the chondrogenic phase of fracture healing was found, prompting more detailed analyses of LOXL2 expression in normal growth plates, and LOXL2 expression and function in developing ATDC5 chondrogenic cells. Data show that LOXL2 is expressed by pre-hypertrophic and hypertrophic chondrocytes in vivo, and that LOXL2 expression is regulated in vitro as a function of chondrocyte differentiation. Moreover, LOXL2 knockdown studies in vitro show that LOXL2 expression is required for ATDC5 chondrocyte cell line differentiation through regulation of SNAIL and SOX9, important transcription factors that control chondrocyte differentiation. Taken together, data provide evidence that LOXL2, like LOX, is a multifunctional protein. LOXL2 promotes chondrocyte differentiation by mechanisms that are likely to include roles as both a regulator and an effector of chondrocyte differentiation.

Postnatal development of depth-dependent collagen density in ovine articular cartilage

Background

Articular cartilage (AC) is the layer of tissue that covers the articulating ends of the bones in diarthrodial joints. Adult AC is characterised by a depth-dependent composition and structure of the extracellular matrix that results in depth-dependent mechanical properties, important for the functions of adult AC. Collagen is the most abundant solid component and it affects the mechanical behaviour of AC. The current objective is to quantify the postnatal development of depth-dependent collagen density in sheep (Ovis aries) AC between birth and maturity. We use Fourier transform infra-red micro-spectroscopy to investigate collagen density in 48 sheep divided over ten sample points between birth (stillborn) and maturity (72 weeks). In each animal, we investigate six anatomical sites (caudal, distal and rostral locations at the medial and lateral side of the joint) in the distal metacarpus of a fore leg and a hind leg.

Results

Collagen density increases from birth to maturity up to our last sample point (72 weeks). Collagen density increases at the articular surface from 0.23 g/ml ± 0.06 g/ml (mean ± s.d., n = 48) at 0 weeks to 0.51 g/ml ± 0.10 g/ml (n = 46) at 72 weeks. Maximum collagen density in the deeper cartilage increases from 0.39 g/ml ± 0.08 g/ml (n = 48) at 0 weeks to 0.91 g/ml ± 0.13 g/ml (n = 46) at 72 weeks. Most collagen density profiles at 0 weeks (85%) show a valley, indicating a minimum, in collagen density near the articular surface. At 72 weeks, only 17% of the collagen density profiles show a valley in collagen density near the articular surface. The fraction of profiles with this valley stabilises at 36 weeks.

Conclusions

Collagen density in articular cartilage increases in postnatal life with depth-dependent variation, and does not stabilize up to 72 weeks, the last sample point in our study. We find strong evidence for a valley in collagen densities near the articular surface that is present in the youngest animals, but that has disappeared in the oldest animals. We discuss that the retardance valley (as seen with polarised light microscopy) in perinatal animals reflects a decrease in collagen density, as well as a decrease in collagen fibril anisotropy.

Tissue engineering of articular cartilage with biomimetic zones

Articular cartilage damage is a persistent and increasing problem with the aging population, and treatments to achieve biological repair or restoration remain a challenge. Cartilage tissue engineering approaches have been investigated for over 20 years, but have yet to achieve the consistency and effectiveness for widespread clinical use. One of the potential reasons for this is that the engineered tissues do not have or establish the normal zonal organization of cells and extracellular matrix that appears critical for normal tissue function. A number of approaches are being taken currently to engineer tissue that more closely mimics the organization of native articular cartilage. This review focuses on the zonal organization of native articular cartilage, strategies being used to develop such organization, the reorganization that occurs after culture or implantation, and future prospects for the tissue engineering of articular cartilage with biomimetic zones.

Mechanical strain stabilizes reconstituted collagen fibrils against enzymatic degradation by mammalian collagenase matrix metalloproteinase 8 (MMP-8)

BACKGROUND

Collagen, a triple-helical, self-organizing protein, is the predominant structural protein in mammals. It is found in bone, ligament, tendon, cartilage, intervertebral disc, skin, blood vessel, and cornea. We have recently postulated that fibrillar collagens (and their complementary enzymes) comprise the basis of a smart structural system which appears to support the retention of molecules in fibrils which are under tensile mechanical strain. The theory suggests that the mechanisms which drive the preferential accumulation of collagen in loaded tissue operate at the molecular level and are not solely cell-driven. The concept reduces control of matrix morphology to an interaction between molecules and the most relevant, physical, and persistent signal: mechanical strain.

METHODOLOGY/PRINCIPAL FINDINGS

The investigation was carried out in an environmentally-controlled microbioreactor in which reconstituted type I collagen micronetworks were gently strained between micropipettes. The strained micronetworks were exposed to active matrix metalloproteinase 8 (MMP-8) and relative degradation rates for loaded and unloaded fibrils were tracked simultaneously using label-free differential interference contrast (DIC) imaging. It was found that applied tensile mechanical strain significantly increased degradation time of loaded fibrils compared to unloaded, paired controls. In many cases, strained fibrils were detectable long after unstrained fibrils were degraded.

CONCLUSIONS/SIGNIFICANCE

In this investigation we demonstrate for the first time that applied mechanical strain preferentially preserves collagen fibrils in the presence of a physiologically-important mammalian enzyme: MMP-8. These results have the potential to contribute to our understanding of many collagen matrix phenomena including development, adaptation, remodeling and disease. Additionally, tissue engineering could benefit from the ability to sculpt desired structures from physiologically compatible and mutable collagen.

An efficient technique for adjusting and maintaining specific hydration levels in soft biological tissues in vitro

Elucidating how mechanics is affected by hydration in soft biological tissues is critical for understanding the potential effects of diseases where tissue extracellular matrix (ECM) is altered. The ability to control ECM water content is necessary for studying hydration-dependent tissue mechanics and for minimizing confounding effects caused by differences in tissue water content among specimens. In this paper, we describe an approach to adjust and maintain water content using a two-stage hydration technique, in order to overcome unique challenges faced in mechanical testing of biological tissues. Bovine aortic tissue was selected to demonstrate the approach. A liquid phase approach using PEG solutions allowed for efficient initial adjustment of tissue hydration. This was followed by a vapor phase approach using a humidity chamber for maintaining stable water content for a defined test duration of 45 min. Incubation in PEG solution brought bovine aortic tissue samples to equilibrium water content in approximately 6 h, much more efficiently than using a humidity chamber alone. Characteristic relationships between tissue water content and PEG concentration as well as relative humidity were obtained. It was found that PEG concentrations ranging from 0 to 40% had an inverse relationship with tissue water content ranging from 80 to 380%, which corresponded to relative humidities between 53 and 99%.

Contribution of postnatal collagen reorientation to depth-dependent mechanical properties of articular cartilage

The collagen fibril network is an important factor for the depth-dependent mechanical behaviour of adult articular cartilage (AC). Recent studies show that collagen orientation is parallel to the articular surface throughout the tissue depth in perinatal animals, and that the collagen orientations transform to a depth-dependent arcade-like structure in adult animals. Current understanding on the mechanobiology of postnatal AC development is incomplete. In the current paper, we investigate the contribution of collagen fibril orientation changes to the depth-dependent mechanical properties of AC. We use a composition-based finite element model to simulate in a 1-D confined compression geometry the effects of ten different collagen orientation patterns that were measured in developing sheep. In initial postnatal life, AC is mostly subject to growth and we observe only small changes in depth-dependent mechanical behaviour. Functional adaptation of depth-dependent mechanical behaviour of AC takes place in the second half of life before puberty. Changes in fibril orientation alone increase cartilage stiffness during development through the modulation of swelling strains and osmotic pressures. Changes in stiffness are most pronounced for small stresses and for cartilage adjacent to the bone. We hypothesize that postnatal changes in collagen fibril orientation induce mechanical effects that in turn promote these changes. We further hypothesize that a part of the depth-dependent postnatal increase in collagen content in literature is initiated by the depth-dependent postnatal increase in fibril strain due to collagen fibril reorientation.

Transport and equilibrium uptake of a peptide inhibitor of PACE4 into articular cartilage is dominated by electrostatic interactions

The availability of therapeutic molecules to targets within cartilage depends on transport through the avascular matrix. We studied equilibrium partitioning and non-equilibrium transport into cartilage of Pf-pep, a 760 Da positively charged peptide inhibitor of the proprotein convertase PACE4. Competitive binding measurements revealed negligible binding of Pf-pep to sites within cartilage. Uptake of Pf-pep depended on glycosaminoglycan charge density, and was consistent with predictions of Donnan equilibrium given the known charge of Pf-pep. In separate transport experiments, the diffusivity of Pf-pep in cartilage was measured to be approximately 1 x 10(-6) cm(2)/s, close to other similarly-sized non-binding solutes. These results suggest that small positively charged therapeutics will have a higher concentration within cartilage than in the surrounding synovial fluid, a desired property for local delivery; however, such therapeutics may rapidly diffuse out of cartilage unless there is additional specific binding to intra-tissue substrates that can maintain enhanced intra-tissue concentration for local delivery.