Radiative decay engineering: biophysical and biomedical applications

Roles of Near and Far Fields in Plasmon-Enhanced Singlet Oxygen Production

In plasmon-enhanced singlet oxygen (¹O₂) production, irradiation of a hybrid photosensitizer-metal nanoparticle leads to a significant alteration of the photosensitizer's ¹O₂ yield. The quest for a more rational design of these nanomaterials calls for a better understanding of the enhancement mechanism that, to this day, remains largely unexplored. Herein, we introduce a new methodology to distinguish the near- and far-field contributions to the plasmon-enhanced ¹O₂ production using a tunable model nanoplatform, Rose Bengal-decorated silica-coated metal nanoparticles. By correlating ¹O₂ production to the experimental and simulated optical properties of our nanoparticles, we effectively discriminate how the near- and far-field effects contribute to the plasmonic interactions. We show that these effects work in synergy; i.e., for nanoparticles with a similar local field, the production of ¹O₂ correlates with maximized scattering yields. Our results expound the critical plasmonic aspects in terms of near and far fields for the design of an efficient hybrid plasmonic nanoparticle photosensitizer.

Efficient Luminescence Enhancement of Mg2TiO4:Mn4+ Red Phosphor by Incorporating Plasmonic Ag@SiO2 Nanoparticles

One of prospective ways for boosting efficiency of luminescent materials is their combination with noble metal nanoparticles. Collective, so-called plasmon, oscillations of surface electrons in a nanoparticle can resonantly interact with incident or fluorescent light and cause an increase in the light absorption cross section or radiative rate for an adjacent emitter. Plasmonic inorganic phosphors require gentle host crystallization at which added noble nanoparticles will not suffer from aggregation or oxidation. The prospective plasmonic Mg₂TiO₄:Mn⁴⁺ phosphor containing core@shell Ag@SiO₂ nanoparticles is prepared here by spare low-temperature annealing of a sol-gel host precursor. It is revealed that Mn⁴⁺ luminescence nonmonotonously depends on the size and concentration of 40 and 70 nm silver nanoparticles. It is demonstrated that luminescence of the Mg₂TiO₄:Mn⁴⁺ phosphor can be up to a 1.5 times increase when Mn⁴⁺ excitation is supported by localized surface plasmon resonance in Ag@SiO₂ nanoparticles.

Plasmonics with Metallic Nanowires

The purpose of this review is to introduce and present the concept of metallic nanowires as building-blocks of plasmonically active structures. In addition to concise description of both the basic physical properties associated with the electron oscillations as well as energy propagation in metallic nanostructures, and methods of fabrication of metallic nanowires, we will demonstrate several key ideas that involve interactions between plasmon excitations and electronic states in surrounding molecules or other emitters. Particular emphasis will be placed on the effects that involve not only plasmonic enhancement or quenching of fluorescence, but also propagation of energy on lengths that exceed the wavelength of light.

A Review on Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) has become a powerful tool in chemical, material and life sciences, owing to its intrinsic features (i.e., fingerprint recognition capabilities and high sensitivity) and to the technological advancements that have lowered the cost of the instruments and improved their sensitivity and user-friendliness. We provide an overview of the most significant aspects of SERS. First, the phenomena at the basis of the SERS amplification are described. Then, the measurement of the enhancement and the key factors that determine it (the materials, the hot spots, and the analyte-surface distance) are discussed. A section is dedicated to the analysis of the relevant factors for the choice of the excitation wavelength in a SERS experiment. Several types of substrates and fabrication methods are illustrated, along with some examples of the coupling of SERS with separation and capturing techniques. Finally, a representative selection of applications in the biomedical field, with direct and indirect protocols, is provided. We intentionally avoided using a highly technical language and, whenever possible, intuitive explanations of the involved phenomena are provided, in order to make this review suitable to scientists with different degrees of specialization in this field.

Preparation, characterization and comparison of biological potency in two new Zn(II) and Pd(II) complexes of butanedione monoxime derivatives

A novel Schiff base ligand (2-iminothiophenol-2,3-butanedione monoxime, ITBM) and its complexes with Pd(II) and Zn(II) metal ions ([M(ITBM)₂]Cl₂) were synthesized and characterized in the present study. The formulated complexes were evaluated for in vitro antioxidant activity as radical scavengers against 1,1-diphenyl-2-picrylhydrazyl radicals (DPPH^•). According to the results, antioxidant activity of Pd complex (IC₅₀=36 mg L^-1) was more effective than that of Zn(II) complex (IC₅₀=72 mg L^-1). Biophysical techniques along with computational modeling were employed to examine the binding of these complexes with human serum albumin (HSA) as the model protein. The trial findings revealed an interaction between Schiff base complexes and HSA with a modest binding affinity [K_b=6.31(±0.11)×10⁴ M^-1 for Zn(II) complex and 0.71(±0.05)×10⁴ M^-1 for Pd(II) complex at 310 K]. An intense fluorescence quenching of protein through a static quenching mechanism was occurred due to the binding of both complexes to HSA. Hydrogen bonds and van der Waals forces in both examined systems were the main stabilizing forces in the development of drug-protein complex. Based on far-UV-CD observations, the content of α-helical structure in the protein was reduced through induction by both complexes. Analysis of protein-ligand docking demonstrated binding of the two Schiff base complexes to residues placed in the IIA subdomain of HSA. In addition, Zn complex with HSA showed a stronger binding ability than that of Pd complex.Communicated by Ramaswamy H. Sarma.

Study of a Miniaturizable System for Optical Sensing Application to Human Cells

Conventional approaches to human intracellular optical sensing, generally, require dedicated laboratories with bulky detection systems. They are performed by cell labeling procedures based on the use of fluorophores that are, mostly, phototoxic, invasive, bleached in case of prolonged light exposures, which require carriers and/or structural modifications for the cellular uptake. These issues, together with the sensitivity of the eukaryotic cell model, could be problematic towards the development of a robust sensing system suitable for biomedical screening. In this work, we studied a sensing system resulting from the combination of the commercial tris(2,2’bipyridyl)ruthenium(II) fluorophore, for cell labeling, with a potentially miniaturizable optical system composed by a laser source and a photomultiplier tube, for the fluorescence analysis.

Design of anapole mode electromagnetic field enhancement structures for biosensing applications

The design of an all-dielectric nanoantenna based on nonradiating "anapole" modes is studied for biosensing applications in an aqueous environment, using FDTD electromagnetic simulation. The strictly confined electromagnetic field within a circular or rectangular opening at the center of a cylindrical silicon disk produces a single point electromagnetic hotspot with up to 6.5x enhancement of |E|, for the 630-650 nm wavelength range, and we can increase the value up to 25x by coupling additional electromagnetic energy from an underlying PEC-backed substrate. We characterize the effects of the substrate design and slot dimensions on the field enhancement magnitude, for devices operating in a water medium.

Coupling of Fluorophores in Single Nanoapertures to Tamm Plasmon Structures

Metal nanostructures (such as plasmonic antennas) have been widely demonstrated to be excellent devices for beaming and sorting the fluorescence emission. These effects rely on the constructive scattering or diffraction from different elements (such as metal corrugations or nanorings) of the nanostructures. However, subwavelength-size nanoholes, without nearby nanoscale features, results in an angularly dispersed emission from the distal surface. Herein, we demonstrate for the first time the emission redirection capabilities of a single isolated nanoaperture milled in a thick silver film deposited on a dielectric multilayer. Specifically, we show that a dye dissolved in ethanol filling in the nanoaperture can couple to Tamm Plasmon Polariton (TPP) modes of the structure. Due to the small in-plane wavevectors of the TPPs, the fluorescence from Tamm-coupled dyes within the nanoaperture is emitted normally to the sample surface, with a minimum angular width of about 12.54°. This kind of fluorescence manipulation has proven to be effective with various nanoaperture shapes, such as circles, squares, and triangles. Our work is also the first experimental demonstration of lateral coupling of fluorophores with TPPs in nanoholes, with potential applications in bioanalysis and biosciences.

Sub-picogram level sensitivity in HIV diagnostics achieved with the europium nanoparticle immunoassay through metal enhanced fluorescence

We describe a novel application of Metal Enhanced Fluorescence (MEF) to immunoassays for boosting the signal through a single step modification of the europium nanoparticle based immunoassay with addition of gold nanoparticles. The new limit of detection was found to be 0.19 pg mL^-1 which was much lower than that of the conventional assay which was around 1.80 pg mL^-1, thus achieving a ten-fold increase in the limit of detection of p24, an early biomarker for HIV infections. Real world applications of the new technique were demonstrated with the commercially available Perkin Elmer Alliance kits greatly improving their sensitivity limits, thus demonstrating that the sensitivity and reproducibility of this approach are as good as those of high-end, sensitive immunoassays. The results of this study pave the way for the development of a highly sensitive screening protocol based on any fluorescent nanoparticle based immunoassay.

Chemiplasmonics for high-throughput biosensors

Background

The sensitivity of ELISA for biomarker detection can be significantly increased by integrating fluorescence with plasmonics. In surface-plasmon-coupled emission, the fluorophore emission is generally enhanced through the so-called physical mechanism due to an increase in the local electric field. Despite its fairly high enhancement factors, the use of surface-plasmon-coupled emission for high-throughput and point-of-care applications is still hampered due to the need for expensive focusing optics and spectrometers.

Methods

Here, we describe a new chemiplasmonic-sensing paradigm for enhanced emission through the molecular interactions between aromatic dyes and C₆₀ films on Ag substrates.

Results

A 20-fold enhancement in the emission from rhodamine B-labeled biomolecules can be readily elicited without quenching its red color emission. As a proof of concept, we demonstrate two model bioassays using: 1) the RhB–streptavidin and biotin complexes in which the dye was excited using an inexpensive laser pointer and the ensuing enhanced emission was recorded by a smartphone camera without the need for focusing optics and 2) high-throughput 96-well plate assay for a model antigen (rabbit immunoglobulin) that showed detection sensitivity as low as 6.6 pM.

Conclusion

Our results show clear evidence that chemiplasmonic sensors can be extended to detect biomarkers in a point-of-care setting through a smartphone in simple normal incidence geometry without the need for focusing optics. Furthermore, chemiplasmonic sensors also facilitate high-throughput screening of biomarkers in the conventional 96-well plate format with 10–20 times higher sensitivity.

Anti-cancer study and whey protein complexation of new lanthanum(III) complex with the aim of achieving bioactive anticancer metal-based drugs

In this study, a new lanthanum (III)-amino acid complex utilizing cysteine has been synthesized and characterized. The anticancer activities of the prepared La(III) complex against MCF-7 cell lines were studied. Results of MTT assay showed that at all three incubation times, the cytotoxic effect of prepared La(III) complex on MCF-7 breast cancer cell lines displays a time- and dose-dependent inhibitory effects. The interactions of the La(III) complex with two whey proteins (bovine serum albumin, BSA, and Bovine β-lactoglobulin, βLG) have been explored by using spectroscopic and molecular dicking methods. The obtained results indicated that La(III) complex strongly quenched the fluorescence of two carrier proteins in static quenching mode and also, BSA hah stronger binding affinity toward studied complex than βLG whit binding constant values of K_{BSA-La Complex} ∼ 0.11 × 10⁴ M^-1 and K_{βLG-La Complex} ∼ 0.63 × 10³ M^-1 at 300 K. The thermodynamic parameters revealed the contribution of hydrogen bond and Vander Waals interactions in both systems. The distances of the La(III) complex whit whey proteins were calculated using Förster energy transfer theory and proved existence of the energy transfer between two proteins and prepared La(III) complex with a high probability. FT-IR and UV-Vis absorption measurements indicated that the binding of the La(III) to BSA and βLG may induce conformational and micro-environmental changes of the proteins. The docking results indicate that the La(III) complex bind to residues located in the site II of BSA and second site of βLG. Communicated by Ramaswamy H. Sarma.

Laser assisted blending of Ag nanoparticles in an alumina veil: a highly fluorescent hybrid

We report a functional hybrid made of silver nanoparticles (AgNPs) embedded in an amorphous aluminium oxide (alumina) film. This laser-initiated process allows formation of AgNPs and amorphous alumina in localized regions defined by the scanning laser beam. Due to metal enhanced fluorescence, this hybrid exhibits strong blue fluorescence emission under ultraviolet excitation. Upon irradiating with electrons at dosages of 1 to 20 mC cm-2, AgNPs become more metallic while the Al film is further oxidised. As a result, the fluorescing property is intensified. Using a hybrid irradiated with 10 mC cm-2, the electronic conductivity of the sample is improved by 11.5 times compared to that of the as-synthesized hybrid film. Excitation by UV light on the sample results in an increase in the detected current of nearly 29 times. Given that the electron beam patterned message is selectively visible only under UV or blue light irradiation, this hybrid film is thus a possible platform for steganographic transmission.

Fluorescence Enhancement Using Bimetal Surface Plasmon-Coupled Emission from 5-Carboxyfluorescein (FAM)

We demonstrate the enhancement of fluorescence emission from a dye, 5-carboxyfluorescein (FAM), which couples with surface plasmons at the spectral channels of excitation and emission. Experiments and calculations revealed that bimetallic (gold-silver) plasmon, as compared to the monometallic ones, allowed such coupling to be enhanced, at both the spectral channels. We achieved the maximum fluorescence enhancement level of 46.5-fold, with markedly high reproducibility (coefficient of variation ~ 0.5%) at a FAM concentration of 10 nM. We also found that higher fluorescence enhancement was more likely to be reproducible. This encourages the use of this technology for practical applications in fluorescence-based biochemical assays. Moreover, we investigated a FAM concentration-dependent enhancement of fluorescence. It was found that fluorescence enhancement decreased and saturated at above 10 nM concentration possibly due to partial photo-bleaching of FAM molecules.

Controlling the Emissive Activity in Heterocyclic Systems Bearing C═P Bonds

The photophysical properties of a series of heteroatom substituted indoles are explored to identify chemical means to control their emissive activity. In particular, we consider impacts of changes in the conjugated backbone, where the C═N bonds of benzoxazoles are replaced by C═P bonds (benzoxaphospholes). The effects of extending the π-conjugation, incorporating various secondary heteroatoms (X-C═P), and enforcing planar rigidity are also examined. Our computational analysis explains the higher fluorescence efficiency observed with extended π-conjugation and highlights the importance of maintaining molecular planarity at both ground- and emissive-state geometries.

Surface enhanced fluorescence and nanoscopic cell wall deformation in adhering Staphylococcus aureus upon exposure to cell wall active and non-active antibiotics

In infections, bacteria often adhere to surfaces and become deformed by the forces with which they adhere. Nanoscopic cell wall deformation defines bacterial responses to environmental conditions and is likely influenced by antibiotics. Here, staphylococcal cell wall deformation upon exposure to cell wall active and non-active antibiotics or their combinations is compared for two green-fluorescent (GFP) isogenic Staphylococcus aureus strains adhering to a gold surface, of which one lacks peptidoglycan cross-linking. Exposure to cell wall active antibiotics caused greater cell wall deformation than a buffer control in the GFP parent and in the Δpbp4GFP isogenic mutant, as measured by surface-enhanced-fluorescence. Cell wall non-active antibiotics only yielded greater deformation than a buffer control in the parent strain, while combinations of cell wall active and non-active antibiotics did not cause greater cell wall deformation. 3D-analysis of the impact of adhesion forces and Young's moduli of the cell wall, both measured using atomic force microscopy, led to the conclusion that increased deformation was mainly due to cell wall weakening and not due to the effects of antibiotics on adhesion forces. Interactions between bacteria and antibiotics are mostly studied using planktonic bacteria, while during infection, bacteria are in an adhering state that deforms their cell wall and therewith influences their adaptive responses. We anticipate that the demonstration of cell wall weakening in adhering bacteria under the influence of antibiotics and the role of peptidoglycan herein will aid in the development of new antibiotics. Surface-enhanced-fluorescence may accordingly develop into a new, highly-sensitive method for diagnosing antibiotic-resistant bacteria.

A superior bright NIR luminescent nanoparticle preparation and indicating calcium signaling detection in cells and small animals

BACKGROUND

Near-field fluorescence (NFF) effects were employed to develop a novel near-infrared (NIR) luminescent nanoparticle (LNP) with superior brightness. The LNP is used as imaging contrast agent for cellular and small animal imaging and furthermore suggested to use for detecting voltage-sensitive calcium in living cells and animals with high sensitivity.

RESULTS

NIR Indocyanine green (ICG) dye was conjugated with human serum albumin (HSA) followed by covalently binding to gold nanorod (AuNR). The AuNR displayed dual plasmons from transverse and longitudinal axis, and the longitudinal plasmon was localized at the NIR region which could efficiently couple with the excitation and emission of ICG dye leading to a largely enhanced NFF. The enhancement factor was measured to be about 16-fold using both ensemble and single nanoparticle spectral methods. As an imaging contrast agent, the ICG-HSA-Au complex (abbreviate as ICG-Au) was conjugated on HeLa cells and fluorescence cell images were recorded on a time-resolved confocal microscope. The emission signals of ICG-Au complexes were distinctly resolved as the individual spots that were observed over the cellular backgrounds due to their strong brightness as well as shortened lifetime. The LNPs were also tested to have a low cytotoxicity. The ICG-Au complexes were injected below the skin surface of mouse showing emission spots 5-fold brighter than those from the same amount of free ICG-HSA conjugates.

CONCLUSIONS

Based on the observations in this research, the excitation and emission of NIR ICG dyes were found to be able to sufficiently couple with the longitudinal plasmon of AuNRs leading to a largely enhanced NFF. Using the LNP with super-brightness as a contrast agent, the ICG-Au complex could be resolved from the background in the cell and small animal imaging. The novel NIR LNP has also a great potential for detection of voltage-gated calcium concentration in the cell and living animal with a high sensitivity.

Fluorescence Modulation of Graphene Quantum Dots Near Structured Silver Nanofilms

Here, we study the plasmonic metal-enhanced fluorescence properties of blue-emitting graphene quantum dots (GQDs) and green-emitting graphene oxide quantum dots (GOQDs) using fluorescence lifetime imaging microscopy. Reactive ion sputtered silver (Ag) on zinc oxide (ZnO) thin films deposited on silicon (Si) wafers are used as the substrates. The morphology of the sputtered Ag gradually changes from nanoislands, via and elongated network and a continuous film with nanoholes, to a continuous film with increasing sputtering time. The fluorescence properties of GQD and GOQD on the Ag are modulated in terms of the intensities and lifetimes as the morphology of the Ag layers changes. Although both GQD and GOQD show similar fluorescence modulation on the Ag nanofilms, the fluorescence of GQD is enhanced, whereas that of GOQD is quenched due to the charge transfer process from GOQD to ZnO. Moreover, the GQD and GOQD exhibit different fluorescence lifetimes due to the effect of their electronic configurations. The theoretical calculation explains that the fluorescence amplification on the Ag nanofilms can largely be attributed to the enhanced absorption mechanism arising from accumulated optical fields around nanogaps and nanovoids in the Ag nanofilms.

Strong Plasmonic Enhancement of a Single Peridinin-Chlorophyll a-Protein Complex on DNA Origami-Based Optical Antennas

In this contribution, we fabricate hybrid constructs based on a natural light-harvesting complex, peridinin-chlorophyll a-protein, coupled to dimer optical antennas self-assembled with the help of the DNA origami technique. This approach enables controlled positioning of individual complexes at the hotspot of the optical antennas based on large, colloidal gold and silver nanoparticles. Our approach allows us to selectively excite the different pigments present in the harvesting complex, reaching a fluorescence enhancement of 500-fold. This work expands the range of self-assembled functional hybrid constructs for harvesting sunlight and can be further developed for other pigment-proteins and proteins.

Localized surface plasmon resonance based biosensing

INTRODUCTION

Bioanalytical sensing based on the principle of localized surface plasmon resonance experiences is currently an extremely rapid development. Novel sensors with new kinds of plasmonic transducers and innovative concepts for the signal development as well as read-out principles were identified. This review will give an overview of the development of this field. Areas covered: The focus is primarily on types of transducers by preparation or dimension, factors for optimal sensing concepts and the critical view of the usability of these devices as innovative sensors for bioanalytical applications. Expert commentary: Plasmonic sensor devices offer a high potential for future biosensing given that limiting factors such as long-time stability of the transducers, the required high sensitivity and the cost-efficient production are addressed. For higher sensitivity, the design of the sensor in shape and material has to be combined with optimal enhancement strategies. Plasmonic nanoparticles from bottom-up synthesis with a post-synthetic processing show a high potential for cost-efficient sensor production. Regarding the measurement principle, LSPRi offers a large potential for multiplex sensors and can provide a high-throughput as well as highly paralleled sensing. The main trends are expected towards optimal LSPR concepts which represent cost-efficient and robust point-of-care solutions, and the use of multiplexed devices for clinical applications.

Single-molecule techniques in biophysics: a review of the progress in methods and applications

Single-molecule biophysics has transformed our understanding of biology, but also of the physics of life. More exotic than simple soft matter, biomatter lives far from thermal equilibrium, covering multiple lengths from the nanoscale of single molecules to up to several orders of magnitude higher in cells, tissues and organisms. Biomolecules are often characterized by underlying instability: multiple metastable free energy states exist, separated by levels of just a few multiples of the thermal energy scale k _B T, where k _B is the Boltzmann constant and T absolute temperature, implying complex inter-conversion kinetics in the relatively hot, wet environment of active biological matter. A key benefit of single-molecule biophysics techniques is their ability to probe heterogeneity of free energy states across a molecular population, too challenging in general for conventional ensemble average approaches. Parallel developments in experimental and computational techniques have catalysed the birth of multiplexed, correlative techniques to tackle previously intractable biological questions. Experimentally, progress has been driven by improvements in sensitivity and speed of detectors, and the stability and efficiency of light sources, probes and microfluidics. We discuss the motivation and requirements for these recent experiments, including the underpinning mathematics. These methods are broadly divided into tools which detect molecules and those which manipulate them. For the former we discuss the progress of super-resolution microscopy, transformative for addressing many longstanding questions in the life sciences, and for the latter we include progress in 'force spectroscopy' techniques that mechanically perturb molecules. We also consider in silico progress of single-molecule computational physics, and how simulation and experimentation may be drawn together to give a more complete understanding. Increasingly, combinatorial techniques are now used, including correlative atomic force microscopy and fluorescence imaging, to probe questions closer to native physiological behaviour. We identify the trade-offs, limitations and applications of these techniques, and discuss exciting new directions.

Wide-Field Fluorescence Microscopy of Real-Time Bioconjugation Sensing

We apply wide-field fluorescence microscopy to measure real-time attachment of photosynthetic proteins to plasmonically active silver nanowires. The observation of this effect is enabled, on the one hand, by sensitive detection of fluorescence and, on the other hand, by plasmonic enhancement of protein fluorescence. We examined two sample configurations with substrates being a bare glass coverslip and a coverslip functionalized with a monolayer of streptavidin. The different preparation of the substrate changes the observed behavior as far as attachment of the protein is concerned as well as its subsequent photobleaching. For the latter substrate the conjugation process is measurably slower. The described method can be universally applied in studying protein-nanostructure interactions for real-time fluorescence-based sensing.

Photon upconversion in organic nanoparticles and subsequent amplification by plasmonic silver nanowires

The development of photonic materials with high photoluminescence is always a challenge in photochemistry and photophysics. Here we present a general approach for enhancing photon upconversion through aggregation and further via surface plasmon resonance (SPR). Luminescent nanoparticles from a tetraphenylethylene derivative were fabricated, showing excellent aggregation-induced emission (AIE) behavior. By mixing with a triplet sensitizer platinum octaethylporphyrin (PtOEP), aggregation-induced photon upconversion (iPUC) could be achieved, resulting in an enhancement of the emission. Blending such iPUC nanoparticles with silver nanowires (AgNWs), the upconverted emission intensity could be significantly amplified due to the SPR of AgNWs. Thus, the concepts of aggregation-induced emission (AIE), metal enhanced fluorescence (MEF) and aggregation-induced photon upconversion (iPUC) were successfully integrated and achieved.

Fluorescence-enhanced bio-detection platforms obtained through controlled "step-by-step" clustering of silver nanoparticles

Metal nanoparticle coatings are widely employed as fluorescence-enhanced platforms for high-throughput biological detection; however, complex manufacturing technologies and stringent fabrication procedures hinder their development for use in bioassays. Here, we present the preparation of fluorescence-based bioassay platforms using spray-assisted step-by-step assembly of silver nanoparticles (Ag NPs) and poly(diallyldimethylammonium chloride) (PDDA). This approach allowed us to control the density and the degree of aggregation of Ag NPs on large surfaces which are prerequisites for the development of bioassay platforms with a substantial fluorescence enhancement. After one assembly cycle (1-Ag platform) the adsorbed particles are not forming aggregates or ones composed of very few particles which, as expected, led to poor fluorescence enhancement (1.1) for cyanine 5. Further assembly steps induce the clustering of Ag NPs by multiple electrostatic interactions between PDDA and Ag NPs and thus increase the number of nanoparticles per aggregate in a controlled way. We observed that the nanoparticle island growth takes place first mainly in the plane (2D) and then in the plane and in the third dimension and that the aggregate morphology (2D versus 3D) strongly affects the plasmonic fluorescence enhancement of the fluorescent dye. A substantial fluorescence enhancement (12.3) was measured for a Ag NP platform obtained after twelve assembly cycles. This result is within the ballpark of values reported in the literature for bioassay platforms using metal nanoparticles and opens the route towards the preparation of fluorescence-based bioassay platforms on the large scale.

Towards optimisation of surface enhanced photodynamic therapy of breast cancer cells using gold nanoparticle–photosensitiser conjugates

Surface enhanced fluorescence of zinc pthalocyanine-functionalised gold nanoparticles leads to a remarkable enhancement in photodynamic efficiency and cell death.

Hybrid AgNPs/MEH-PPV nanocomplexes with enhanced optical absorption and photoluminescence properties

Fluorescent semiconducting conjugated polymer nanoparticles (CPNs) are promising candidates for enhanced luminescent devices and bioimaging.

Cyanine dyes as ratiometric fluorescence standards for the far-red spectral region

Absolute fluorescence quantum yields are reported for a group of commercially available dyes suitable for use as secondary standards across the far-red spectral window.

Raman and Luminescent Spectra of Sulfonated Zn Phthalocyanine Enhanced by Gold Nanoparticles

Sulfonated Zn phthalocyanine, as a prospective photosensitizer in the photodynamic therapy of tumors, is investigated by means of Raman, infrared, and fluorescence spectroscopies. Conventional and surface-enhanced spectra from this photosensitizer are obtained and compared. Gold nano-islands attached to silica cores (Au-SiO₂) are proposed as nanostructures providing plasmonically enhanced signals. Pronounced enhancement of Raman and infrared spectral bands from sulfonated Zn phthalocyanine allows their more convenient assignment with vibrational modes of sulfonated Zn phthalocyanine. In comparison to Raman and IR, the fluorescence is less enhanced by Au-SiO₂ particles.

Specific Detection of Carcinoembryonic Antigen Based on Fluorescence Quenching of Hollow Porous Gold Nanoshells with Roughened Surface

The detection of tumor biomarkers in the early stage is highly desirable for the therapy of cancer. However, rapid, low-cost, sensitive, and selective detection of biomarkers remains a challenge owing to the sequence homology, short length, and low abundance. This Research Article describes the synthesis of a novel carcinoembryonic antigen (CEA) probe using hollow porous gold nanoparticles (HPGNPs) with roughened surface based on fluorescence quenching. For specific detection of CEA, the surface of HPGNP is modified by carboxyl modification, carboxyl activation, and antibody conjugation. Furthermore, to enhance the detection performance, we have systematically optimized the parameters, such as particle size, surfactants, surface roughness, surface hole size, and the molecule-particle distance (MPD). The results demonstrate that the fluorescence quenching efficiency would be enhanced with a larger particle size and surface hole size, roughened surface and a greater MPD. Also, with careful inspection of different surfactants of CTAB and PVP, we find that PVP has the optimal performance on fluorescence quenching. Under these optimized conditions, CEA could be detected with an ultralow detection limit of 1.5 pg/mL, and the probe shows a linear range from 2 to 100 pg/mL. The limit of detection is an order of intensity lower than related methods. Interference experiment results have shown that the influence of the interfering proteins could be neglected in the detection procedure.

Coupling of Molecular Transition with the Surface Plasmon Resonance of Silver Nanoparticles inside the Restricted Environment of Reverse Micelles

Interaction of molecular transitions of two fluorophores-fluorescein (FL) and safranin O (SAF)-with the surface plasmon resonance (SPR) of silver nanoparticles (AgNPs) inside a water/sodium dioctylsulfosuccinate (AOT)/n-heptane reverse micelle (RM) has been studied using ultraviolet-visible and fluorescence spectroscopies. Here, we exploit the natural capacity of a RM to act simultaneously as a template for nanoparticle formation and host the fluorophores. The fluorophores and reducing agent were loaded together into the water pool; thereafter, silver salt was added, and subsequently, spectral modification and size evolution were monitored by steady-state and time-resolved optical spectroscopy. In the FL-AgNP composite, the SPR band of AgNPs undergoes a strong red shift. Moreover, significant modifications of both the fluorescence intensity and lifetime of FL were found when AgNPs formed inside the RM core. On the contrary, in the SAF-AgNP composite, no such effect was noticed, and the composite system retains the original optical characteristics of their constituents (i.e., both the position of molecular transitions and SPR maximum remain unchanged). This differential effect has been rationalized by the dissimilar plasmon-fluorophore coupling in the two systems, controlled by a combination of spatial distribution and spectral detuning of the molecular absorption maxima of the dyes (455 and 530 nm for FL and SAF, respectively) from the SPR band maximum (∼400 nm) of AgNPs.

Aptamer-Based Single-Step Assay by the Fluorescence Enhancement on Electroless Plated Nano Au Substrate

A new single-step aptamer-based surface-enhanced fluorescent optical sensor is built, by combining an aptamer-target interaction for target recognition and a fluorophore interaction for signal enhancement. The developed aptasensor is simple, sensitive, specific and stable for the detection of thrombin. A new nanometallic Au structure in the range of 100 nm was constructed through effective electroless plating method on a Cu thin film. Cu⁺ ions act as sacrificial seeds for the reduction of Au2+/3+ ions to form Au nanolawns. In order to utilize the structure for a fluorescence-based sensor, aptamer conjugated with Cy3 was immobilized on the nanogold substrate through electrostatic attraction. The Au substrate was coated with chitosan (molecular weight 1000 Da). Thrombin binding aptamer (TBA) was applied as a model system demonstrating the aptamer-based fluorescence assay on nanogold substrates. Thrice-enhanced fluorescence emission was achieved with Cy3-conjugated TBA stably immobilized on the chitosan-coated Au substrate. The intensity change was proportional to the concentration of thrombin from 10 μM to 10 pM, whereas the intensity change was ignorable for other proteins such as human serum albumin (HSA). Aptamer-based assay benefited from simple immobilization of receptors and Au nanostructure contributed in building an effective surface enhancing/positively charged substrate was proved. Such an aptasensor holding high utilities for point-of-care devices by incorporating simplicity, sensitivity and selectivity in detection, low-cost for test, small sample volumes has been developed.

Re-usable PDMS stamps for non-destructive fluorescence evaluation and imaging of thin film photonic structures

We report on a non-destructive method for evaluating fluorescence emission from fluorophores placed upon engineered photonic structures. Our method utilizes re-usable, fluorescent thin film coated polydimethylsiloxane (PDMS) stamps. We harness the inherent characteristics of PDMS slabs; their ability to form conformal contact through van der Waals interactions in bringing the coated fluorescent layer on PDMS into close proximity of the photonic structure of interest. Fluorescence measurements are performed using the PDMS slab while in conformal contact with the test structure, allowing one to re-use these stamps for reliable evaluation over multiple samples. Transfer of the fluorescent film from the PDMS to the test structures is mitigated by the use of appropriate cross linkers that covalently bond the fluorescent film to the PDMS surface. To demonstrate the application potential of this approach, we report on the evaluation of fluorescence emission modulation from patterned nanoporous thin films, which are particularly challenging to evaluate using traditional approaches, and from plasmonic gratings supporting metal enhanced fluorescence. Comparison with traditional evaluation approaches has been made to showcase the superiority of the reported technique.

Plasmon-induced absorption of blind chlorophylls in photosynthetic proteins assembled on silver nanowires

We demonstrate that controlled assembly of eukaryotic photosystem I with its associated light harvesting antenna complex (PSI-LHCI) on plasmonically active silver nanowires (AgNWs) substantially improves the optical functionality of such a novel biohybrid nanostructure. By comparing fluorescence intensities measured for PSI-LHCI complex randomly oriented on AgNWs and the results obtained for the PSI-LHCI/cytochrome c₅₅₃ (cyt c₅₅₃) bioconjugate with AgNWs we conclude that the specific binding of photosynthetic complexes with defined uniform orientation yields selective excitation of a pool of chlorophyll (Chl) molecules that are otherwise almost non-absorbing. This is remarkable, as this study shows for the first time that plasmonic excitations in metallic nanostructures can not only be used to enhance native absorption of photosynthetic pigments, but also - by employing cyt c₅₅₃ as the conjugation cofactor - to activate the specific Chl pools as the absorbing sites only when the uniform and well-defined orientation of PSI-LHCI with respect to plasmonic nanostructures is achieved. As absorption of PSI alone is comparatively low, our approach lends itself as an innovative approach to outperform the reported-to-date biohybrid devices with respect to solar energy conversion.

Integrated dielectrophoretic and surface plasmonic platform for million-fold improvement in the detection of fluorescent events

We present an integrated dielectrophoretic (DEP) and surface plasmonic technique to quantify ∼1 pM of fluorescent molecules in low conductivity buffers. We have established a DEP force on target molecules to bring those molecules and place them on the nanometallic structures (hotspots) for quantification through surface plasmonic effects. Our results show that the DEP is capable of placing the fluorescent molecules on the hotspots, which are depicted as a significant reduction in the fluorescence lifetime of those molecules. To efficiently integrate the DEP and plasmonic effects, we have designed and utilized pearl-shaped interdigitated electrodes (PIDEs) in experiments. These electrodes generate 2-3 times higher DEP force than traditional interdigitated electrodes. Therefore, high-throughput assays can be developed. The nanometallic structures were strategically fabricated in the periphery of PIDEs for smooth integration of DEP and plasmonic detection. With the introduction of DEP, about 10⁶-fold improvement was achieved over existing plasmonic-based detection. Therefore, this simple addition to the existing surface plasmonic-based detection will enable the disease related protein detection.

Surface plasmon resonance in gold nanoparticles: a review

In the last two decades, plasmon resonance in gold nanoparticles (Au NPs) has been the subject of intense research efforts. Plasmon physics is intriguing and its precise modelling proved to be challenging. In fact, plasmons are highly responsive to a multitude of factors, either intrinsic to the Au NPs or from the environment, and recently the need emerged for the correction of standard electromagnetic approaches with quantum effects. Applications related to plasmon absorption and scattering in Au NPs are impressively numerous, ranging from sensing to photothermal effects to cell imaging. Also, plasmon-enhanced phenomena are highly interesting for multiple purposes, including, for instance, Raman spectroscopy of nearby analytes, catalysis, or sunlight energy conversion. In addition, plasmon excitation is involved in a series of advanced physical processes such as non-linear optics, optical trapping, magneto-plasmonics, and optical activity. Here, we provide the general overview of the field and the background for appropriate modelling of the physical phenomena. Then, we report on the current state of the art and most recent applications of plasmon resonance in Au NPs.