Structure of an exocellular polysaccharide of Lactobacillus helveticus TN-4, a spontaneous mutant strain of Lactobacillus helveticus TY1-2

Structural characterisation of a highly branched exopolysaccharide produced by Lactobacillus delbrueckii subsp. bulgaricus NCFB2074

Lactobacillus delbrueckii subsp. bulgaricus NCFB2074 when grown in skimmed milk secretes a highly branched exopolysaccharide. The exopolysaccharide has a heptasaccharide repeat unit and is composed of glucose and galactose in the molar ratio 3:4. Using chemical techniques and 1D and 2D NMR spectroscopy the polysaccharide has been shown to possess the following repeat unit structure: [carbohydrate structure: see text].

Biosynthesis, characterisation, and design of bacterial exopolysaccharides from lactic acid bacteria

Lactic acid bacteria (LAB) are characterised by their conversion of a large proportion of their carbon feed, fermentable sugars, to lactic acid. However, in addition to lactic acid production, the LAB are able to divert a small proportion of fermentable sugars towards the biosynthesis of exopolysaccharides (EPSs) that are independent of the cell surface and cell wall material. These microbial EPSs when suspended or dissolved in aqueous solution provide thickening and gelling properties, and, as such, there is great interest in using EPSs from food grade microorganisms (such as the LAB that are traditionally used for food fermentations) for use as thickening agents. The current review includes a brief summary of the recent literature describing features of the biosynthetic pathways leading to EPS production. Many aspects of EPS biosynthesis in LAB are still not fully understood and a number of inferences are made regarding the similarity of the pathway to those involved in the synthesis of other cell polysaccharides, e.g., cell wall components. The main body of the review will cover practical aspects concerned with the isolation and characterisation of EPS structures. In the last couple of years, a substantial number of structures have been published and a summary of the common elements of these structures is included as is a suggestion for a system for representing structures. A brief highlight of the attempts that are being made to design 'tailor'-made polysaccharides using genetic modification and control of metabolic flux is presented.

UDP-N-acetylglucosamine 4-epimerase activity indicates the presence of N-acetylgalactosamine in exopolysaccharides of Streptococcus thermophilus strains

The monomer composition of the exopolysaccharides (EPS) produced by Streptococcus thermophilus LY03 and S. thermophilus Sfi20 were evaluated by high-pressure liquid chromatography with amperometric detection and nuclear magnetic resonance spectroscopy. Both strains produced the same EPS composed of galactose, glucose, and N-acetylgalactosamine. Further, it was demonstrated that the activity of the precursor-producing enzyme UDP-N-acetylglucosamine 4-epimerase, converting UDP-N-acetylglucosamine into UDP-N-acetylgalactosamine, is responsible for the presence of N-acetylgalactosamine in the EPS repeating units of both strains. The activity of UDP-N-acetylglucosamine 4-epimerase was higher in both S. thermophilus strains than in a non-EPS-producing control strain. However, the level of this activity was not correlated with EPS yields, a result independent of the carbohydrate source applied in the fermentation process. On the other hand, both the amounts of EPS and the carbohydrate consumption rates were influenced by the type of carbohydrate source used during S. thermophilus Sfi20 fermentations. A correlation between activities of the enzymes alpha-phosphoglucomutase, UDP-glucose pyrophosphorylase, and UDP-galactose 4-epimerase and EPS yields was seen. These experiments confirm earlier observed results for S. thermophilus LY03, although S. thermophilus Sfi20 preferentially consumed glucose for EPS production instead of lactose in contrast to the former strain.

Structural characterisation of the exopolysaccharide produced by Streptococcus thermophilus EU20

Streptococcus thermophilus EU20 when grown on skimmed milk secretes a high-molecular-weight exopolysaccharide that is composed of glucose, galactose and rhamnose in a molar ratio of 2:3:2. Using chemical techniques and 1D and 2D-NMR spectroscopy (1H and 13C) the polysaccharide has been shown to possess a heptasaccharide repeating unit having the following structure: [chemical structure: see text]. Treatment of the polysaccharide with mild acid (0.5 M TFA, 100 degrees C for 1 h) liberates two oligosaccharides; the components correspond to the repeating unit and a hexasaccharide equivalent to the repeating unit minus the terminal alpha-L-Rhap.

Structure of the exopolysaccharide produced by Streptococcus thermophilus S3

The exopolysaccharide of Streptococcus thermophilus S3, produced in skimmed milk, is composed of D-galactose and L-rhamnose in a molar ratio of 2:1. The polysaccharide contains 0.4 equiv of O-acetyl groups per repeating unit. Linkage analysis and 1D/2D NMR (1H and 13C) studies on native and O-deacetylated EPS together with nanoES-CID tandem mass spectrometry studies on oligosaccharides generated by a periodate oxidation protocol, show the polysaccharide to have the following structure: [structure: see text].

Structure of the extracellular polysaccharide produced by Lactobacillus delbrueckii subsp. bulgaricus 291

The lactic acid bacterium Lactobacillus delbrueckii subsp. bulgaricus 291, when grown in skimmed milk, produced 80 mg/L exopolysaccharide with an average molecular mass of 1.4 x 10(3) kDa. Monosaccharide analysis, methylation analysis, MS, and 1D/2D NMR (1H and 13C) studies performed on the native polysaccharide, and on oligosaccharides obtained from a mild acid hydrolysate of the native polysaccharide, showed the polysaccharide to consist of branched pentasaccharide repeating units with the following structure: [structure: see text].

Structure and properties of the exopolysaccharide produced by Streptococcus macedonicus Sc136

Streptococcus macedonicus is a Gram positive lactic acid bacterium that is part of the starter flora present in Greek sheep and goat cheeses. The S. macedonicus Sc136 strain produces a high-molecular-mass, highly texturizing exopolysaccharide composed of D-glucose, D-galactose, and N-acetyl-D-glucosamine in the molar ratio of 3:2:1. The structure of the exopolysaccharide produced by S. macedonicus Sc136 was determined by chemical analysis, mass spectrometry, and nuclear magnetic resonance spectroscopy. The repeating unit was shown to be: (see text) The polysaccharide sidechain beta-D-Galf-(1-->6)-beta-D-Glcp-(1-->6)-beta-D-GlcpNAc is a key factor in the highly texturizing properties of the S.macedonicus Sc136 exopolysaccharide. Finally, the trisaccharide sequence beta-D-GlcpNAc-(1-->3)-beta-D-Galp-(1-->4)-beta-D-Glcp corresponds to the internal backbone of the lacto-N-tetraose and lacto-N-neotetraose units, which serve as a structural basis for the large majority of human milk oligosaccharides, an additional property offering an important potential for the development of improved infant nutrition products.

Structure of a viscous exopolysaccharide produced by Lactobacillus helveticus K16

A viscous extracellular polysaccharide produced by Lactobacillus helveticus K16 has been investigated. Sugar and methylation analysis, 1H and 13C NMR spectroscopy revealed that the polysaccharide is composed of a hexasaccharide repeating unit. The sequence of sugar residues was determined by use of two-dimensional nuclear Overhauser effect spectroscopy and heteronuclear multiple bond connectivity experiments. The structure of the repeating unit of the exopolysaccharide from L. helveticus K16 is as follows: carbohydrate sequence [see text].

Purification and characterisation of a beta-galactosidase from Aspergillus aculeatus with activity towards (modified) exopolysaccharides from Lactococcus lactis subsp. cremoris B39 and B891

Beta-galactosidase from Aspergillus aculeatus was purified from a commercial source for its hydrolytic activity towards (modified) exopolysaccharides (EPSs) produced by Lactococcus lactis subsp. cremoris B39 and B891. The enzyme had a molecular mass of approximately 120 kDa, a pI between 5.3 and 5.7 and was optimally active at pH 5.4 and 55-60 degrees C. Based on the N-terminal amino acid sequence, the enzyme probably belongs to family 35 of the glycosyl hydrolases. The catalytic mechanism was shown to be retaining and transglycosylation products were demonstrated using lactose as a substrate. The beta-galactosidase was also characterised using its activity towards two EPSs having lactosyl side chains attached to different backbone structures. The enzyme degraded O-deacetylated EPS B891 faster than EPS B39. Furthermore, the presence of acetyl groups in EPS B891 slowed down the hydrolysing rate, but the enzyme was still able to release all terminally linked galactose.

Solution properties of viilian, the exopolysaccharide from Lactococcus lactis subsp. cremoris SBT 0495

The exopolysaccharide (EPS) "viilian" was isolated from a large-batch fermentation of Lactococcus lactis subsp. cremoris SBT 0495. After applying a newly developed purification procedure, pure viilian with a weight-averaged molar mass of 2.64 x 10(3) kg/mol was obtained in a yield of 0.6 g/L culture broth. The native EPS, as well as lower molar mass fractions obtained by sonication of the native polymer, were studied by capillary viscometry and size-exclusion chromatography (SEC) coupled to multiangle laser light scattering detection (MALLS). From the viscosity data at various ionic strengths, we extracted a Mark-Houwink-Kuhn-Sakurada exponent a = 0.79, and a Smidsrod B value of 0.03. By application of the Hearst, Bohdanecký, and Odijk models for stiff polymer coils, in connection to the experimental viscosity data, we established the characteristic ratio to be C(infinity) = 44 and the intrinsic persistence length q(0) = 11.5 nm. The rms radii of gyration predicted from each of the models were in good agreement with the experimental radii (e.g., <S(2)>(1/2)(w) = 162 nm for native viilian in 0.2M NaNO(3)), as determined by SEC-MALLS. In addition, the Odijk model predicts correct ionic strength-linear charge density dependence of the rms radius of gyration. From the combined viscosity and SEC-MALLS experiments we concluded that, in dilute aqueous solutions, viilian behaves as an intermediately stiff, random coil polyelectrolyte system.

Structural elucidation of the viscous exopolysaccharide produced by Lactobacillus helveticus Lb161

A viscous extracellular polysaccharide produced by Lactobacillus helveticus Lb161 isolated from raw milk has been investigated. Sugar and methylation analysis, and 1H and 13C NMR spectroscopy revealed that the polysaccharide is composed of a heptasaccharide repeating unit. The sequence of sugar residues was determined by use of two-dimensional nuclear Overhauser effect spectroscopy and heteronuclear multiple bond connectivity experiments. The structure of the repeating unit of the exopolysaccharide from L. helveticus Lb161 is as follows: carbohydrate structure [see text]. The polysaccharide contains approximately 0.6 equivalents of O-acetyl group per repeating unit (not located).

Structural characterisation and enzymic modification of the exopolysaccharide produced by Lactococcus lactis subsp. cremoris B39

Lactococcus lactis subsp. cremoris B39 grown on whey permeate produced an exopolysaccharide containing L-Rha, D-Gal and D-Glc in a molar ratio of 2:3:2. The polysaccharide was modified using an enzyme preparation from Aspergillus aculeatus, resulting in the release of Gal and a polymer with approximately the same hydrodynamic volume as the native polysaccharide. Linkage analysis and 1H NMR studies of both the native and modified exopolysaccharides elucidated that terminally linked Gal was released during modification and that the chemical structure of the branches within the repeating units is: beta-D-Galp-(1-->4)-beta-D-Glcp-(1-->. 2D NMR experiments (both 1H-1H and 1H-13C) revealed that exopolysaccharide B39 consists of a branched heptasaccharide repeating unit with the following structure: [structure: see text].

Rhamnopyranosylgalactofuranan, a new immunologically active polysaccharide from Thamnolia subuliformis

A complex polysaccharide, Ths-3, consisting mainly of rhamnopyranosyl and galactofuranosyl units, has been isolated from the water extract of the lichen Thamnolia subuliformis using ethanol fractionation, dialysis, ion-exchange chromatography, gel filtration and preparative GP-HPLC. The mean M(r) of Ths-3 was determined to be 1450 kD, and the monosaccharide composition is gal/rha/glc/xyl/man in the ratio of 40:31:13:10:6. The structure of Ths-3 was further elucidated by methylation analysis by GC-MS and NMR spectroscopy and found to be basically composed of (1-->3)-linked beta-D-galactofuranosyl units with branches on C6, and rhamnosyl units being predominantly (1-->2)-linked with branches on C3 and C4, while some units are (1-->3)-linked. Glucose, mannose and galactofuranose are found as terminal units and glucose and mannose are also (1-->4)-linked, while xylose is only present as terminal units. The trisaccharide xylglcglc was detected after partial hydrolysis of the polysaccharide. The immunomodulating activity of Ths-3 was tested in an in vitro phagocytosis assay and the classical anticomplementary assay, and proved to be active in both tests. The authors suggest the trivial name thamnolan for Ths-3.

Indication that the nitrogen source influences both amount and size of exopolysaccharides produced by streptococcus thermophilus LY03 and modelling of the bacterial growth and exopolysaccharide production in a complex medium

Streptococcus thermophilus LY03 is a yogurt strain producing the same exopolysaccharide material in both milk and MRS broth. Actually, two types of exopolysaccharides are produced simultaneously. The two exopolysaccharides are identical in monomer composition (galactose and glucose in a 4:1 ratio) but differ in molecular size. Gel permeation chromatography revealed a high-molecular-mass exopolysaccharide (1.8 x 10(6)) and a low-molecular-mass exopolysaccharide (4.1 x 10(5)). Both exopolysaccharides can be isolated from the fermentation broth separately. The proportion in which they are produced is strongly dependent on the carbon/nitrogen ratio of the fermentation broth. A shift from a high-molecular-mass exopolysaccharide to a low-molecular-mass exopolysaccharide was observed with increasing initial complex nitrogen concentrations. All necessary biokinetic parameters to study the kinetics of S. thermophilus LY03 fermentations were obtained from a mathematical model which describes both S. thermophilus LY03 growth and exopolysaccharide production and degradation. The model is valid with various initial complex nitrogen concentrations and can be applied to simulate exopolysaccharide production in a milk medium.

Introduction of the exopolysaccharide gene cluster from Streptococcus thermophilus Sfi6 into Lactococcus lactis MG1363: production and characterization of an altered polysaccharide

Streptococcus thermophilus Sfi6 produces an exopolysaccharide (EPS) composed of glucose, galactose and N-acetylgalactosamine in the molar ratio of 1:2:1. The genes responsible for the EPS biosynthesis have been isolated previously and found to be clustered in a 14.5 kb region encoding 13 genes. Transfer of this gene cluster into a non-EPS-producing heterologous host, Lactococcus lactis MG1363, yielded an EPS with a similar high molecular weight, but a different structure from the EPS from the native host. The structure of the recombinant EPS was determined by means of 1H homonuclear and 1H-13C heteronuclear two-dimensional nuclear magnetic resonance (NMR) spectra and was found to be --> 3)-beta-D-Glcp-(1 --> 3)-alpha-D-Galp-(1 --> 3)-beta-D-Galp-(1 --> as opposed to --> 3)[alpha-D-Galp-(1 --> 6)]-beta-D-Glcp-(1 --> 3)-alpha-D-GalpNAc-(1 --> 3)-beta-D-Galp-(1 --> for the wild-type S. thermophilus Sfi6. Furthermore, L. lactis MG1363 (pFS101) was also lacking a UDP-N-acetylglucosamine C4-epimerase activity, which would provide UDP-GalNAc for a GalNAc incorporation into the EPS and probably caused the substitution of GalNAc by Gal in the recombinant EPS. This modification implies that (i) bacterial glycosyltransferases could potentially have multiple specificities for the donor and the acceptor sugar molecule; and (ii) the repeating unit polymerase can recognize and polymerize a repeating unit that differs in the backbone as well as in the side-chain from its native substrate.

Structure of an extracellular polysaccharide produced by Lactobacillus rhamnosus strain C83

The extracellular polysaccharide produced by Lactobacillus rhamnosus strain C83 was found to be composed of D-glucose and D-galactose in a molar ratio of 2:3. The primary structure of the polysaccharide was shown by sugar analysis, methylation analysis, FABMS, partial acid hydrolysis and nuclear magnetic resonance (NMR) spectroscopy to consist of a pentasaccharide repeating unit having the following structure: -->3)-alpha-D-Glcp-(1-->2)-beta-D-Galf-(1-->6)-alpha-D-Galp-(1-->6 )-alpha-D -Glcp-(1-->3)-beta-D-Galf-(1-->

The exopolysaccharides produced by Streptococcus thermophilus Rs and Sts have the same repeating unit but differ in viscosity of their milk cultures

The polysaccharides produced by Streptococcus thermophilus Rs and Sts in skimmed milk consist of D-Gal and L-Rha in a molar ratio of 5:2. Linkage analysis and 1D/2D NMR (1H and 13C) studies revealed that both polysaccharides have the same branched heptasaccharide repeating unit: [formula: see text] Remarkably, the two strains differ in their effects on the viscosity of stirred milk cultures. The milk culture of S. thermophilus Rs is non-ropy and affords 135 mg/L polysaccharide with an average molecular mass of 2.6 x 10(3) kDa. In contrast, the milk culture of S. thermophilus Sts is ropy and produces 127 mg/L polysaccharide with an average molecular mass of 3.7 x 10(3) kDa. Permeability measurements of non-stirred milk cultures of both strains suggest that both strains have a similar effect on the protein-polysaccharide network. Therefore, the only clear difference between both strains, which may cause the difference in ropiness of the milk cultures, is the difference in molecular mass of the polysaccharide.

Structural analysis of the exopolysaccharides produced by Lactobacillus spp. G-77

The exopolysaccharide produced by a ropy strain of Lactobacillus spp. G-77 in a semi-defined medium, was found to be a mixture of two homopolymers composed of D-Glc. The two poly-saccharides were separated and, on the basis of monosaccharide and methylation analyses, 1H, 13C, 1D and 2D NMR experiments, one of the polysaccharides was shown to be a 2-substituted-(1-3)-beta-D-glucan, identical to that described for the EPS from Pediococcus damnosus 2.6 (M.T. Dueñas-Chasco, M.A. Rodríguez-Carvajal, P. Tejero-Mateo, G. Franco-Rodríguez, J. L. Espartero, A. Irastorza-Iribar, and A.M. Gil-Serrano, Carbohydr. Res., 303 (1997) 453-458), and the other polysaccharide was shown to consist of repeating units with the following structure [formula: see text]

Structural characterization of the exocellular polysaccharides produced by Streptococcus thermophilus SFi39 and SFi12

We investigated the structures of the exopolysaccharides (EPSs) produced by Streptococcus thermophilus SFi39 and SFi12. Both polymers were found to have molecular masses of greater than 2 x 10(6) Da. The SFi39 EPS consisted of D-glucose and D-galactose in a molar ratio of 1:1, whereas the SFi12 EPS was composed of D-galactose, L-rhamnose, and D-glucose in a molar ratio of 3:2:1. Methylation analysis of and nuclear magnetic resonance spectra recorded from the native polysaccharide, as well as oligosaccharides released by partial acid hydrolysis, allowed the complete structural determination of the SFi39 EPS, which consists of the following tetrasaccharide repeating unit: [formula: see text] Similar spectra recorded only from the native polysaccharide were sufficient to allow the structural determination of the SFi12 EPS, which consists of the following hexasaccharide repeating unit: [formula: see text] This study shows that the texturizing properties of different S. thermophilus ropy strains are based on the production of EPSs exhibiting chemical similarities but structural differences.

Lactobacillus helveticus Lh59 secretes an exopolysaccharide that is identical to the one produced by Lactobacillus helveticus TN-4, a presumed spontaneous mutant of Lactobacillus helveticus TY1--2

Lactobacillus helveticus Lh59 produces a high-molecular-mass exopolysaccharide (> or = 2 x 10(6) Da) when cultured in skimmed milk. Compositional analysis, methylation analysis and NMR experiments (1H and 13C) recorded from the native polysaccharide as well as from oligosaccharides released by partial acid hydrolysis, allowed the complete structural determination of this polysaccharide, which consists of the following hexasaccharide repeating unit: [symbol: see text] This structure is identical to the one of an EPS produced by L. helveticus TN-4, which was claimed to be a spontaneous mutant of strain TY1-2.

Predicting helical structures of the exopolysaccharide produced by Lactobacillus sake 0- 1

The viscous exopolysaccharide (EPS) produced by Lactobacillus sake 0- 1 is a high molecular mass polymer (Mm 6 x 10(6) Da) consisting of pentasaccharide repeating units with a composition of D-glucose, L-rhamnose, and sn-glycerol 3-phosphate in molar ratios of 3:2:1. One of the rhamnose residues in the repeating unit is partially 2-O-acetylated. The O-deacetylated, deglycerophosphorylated EPS has been investigated by molecular mechanics calculations. A complete conformational analysis of each of the constituent disaccharide fragments has been performed using the flexible residue approach with the MM3(92) force field. Furthermore, using the same force field, CICADA analyses were accomplished on hexa- and octasaccharide substructure of the polysaccharide. Based on these analyses, insight was obtained into nine conformational minima for the polysaccharide. The low energy conformations found by CICADA were extrapolated to regular polysaccharide structures using a polysaccharide builder program. The generated helices exhibit either 2-fold or 3- or 4-fold right-handed chiralities, and in each case the helices are highly extended.

Structural characterization of the exopolysaccharide produced by Lactobacillus acidophilus LMG9433

The exopolysaccharide produced by Lactobacillus acidophilus LMG9433 in a semi-defined medium was found to be a charged heteropolymer, with a composition of D-glucose, D-galactose, D-glucuronic acid, and 2-acetamido-2-deoxy-D-glucose in molar ratios of 2:1:1:1. By means of methylation analysis, uronic acid degradation, de-N-acetylation/deamination, partial acid hydrolysis, and 1D/2D NMR studies the polysaccharide was demonstrated to consist of repeating units with the following structure: [Table: see text]