Conserved reiterated domains in Clostridium thermocellum endoglucanases are not essential for catalytic activity

Evidence for a general role for non-catalytic thermostabilizing domains in xylanases from thermophilic bacteria

A genomic library of Clostridium thermocellum DNA constructed in lambda ZAPII was screened for xylanase-expressing clones. Cross-hybridization experiments revealed a new xylanase gene isolated from the gene library, which was designated xyn Y. The encoded enzyme, xylanase Y (XYLY), displayed features characteristic of an endo-beta1,4-xylanase: the enzyme rapidly hydrolysed oat spelt, wheat and rye arabinoxylans and was active against methyl-umbelliferyl-beta-D-cellobioside, but did not hydrolyse any cellulosic substrates. The pH and temperature optima of the enzyme were 6.8 and 75 degrees C respectively, and the recombinant XYLY, expressed by Escherichia coli had a maximum Mr of 116000. The nucleotide sequence of xyn Y contained an open reading frame of 3228 bp encoding a protein of predicted Mr 120 105. The encoded enzyme contained a typical N-terminal 26-residue signal peptide, followed by a 164 amino acid sequence, designated domain A, that was not essential for catalytic activity. Downstream of domain A was a 351-residue xylanase Family F catalytic domain, followed by a 180-residue sequence that exhibited 28% sequence identity with a thermostable domain of Thermoanaerobacterium saccharolyticum xylanase A. The C-terminal portion of XYLY comprised the 23-residue duplicated docking sequence found in all other C. thermocellum plant cell wall hydrolases that are constituents of the bacterium's multienzyme complex, termed the cellulosome, followed by a 286-residue domain which exhibited 32% sequence identity with the N-terminal region of C. thermocellum xylanase Z. The enzyme did not contain linker sequences found in other C. thermocellum plant cell wall hydrolases. Analysis of truncated forms of XYLY and hybrid proteins, comprising segments of XYLY fused to the E. coli maltose binding domain, confirmed that XYLY contained a central catalytic domain and an adjacent thermostable domain. The C-terminal domain did not bind to cellulose or xylan. Western blot analysis using antiserum raised against XYLY showed that the xylanase was located in the cellulosome and did not appear to be extensively glycosylated. The non-catalytic domains of XYLY are discussed in relation to the general stability of thermophilic xylanases.

A non-modular endo-beta-1,4-mannanase from Pseudomonas fluorescens subspecies cellulosa

Pseudomonas fluorescens subsp. cellulosa when cultured in the presence of carob galactomannan degraded the polysaccharide. To isolate gene(s) from P. fluorescens subsp. cellulosa encoding endo-beta-1,4-mannanase (mannanase) activity, a genomic library of Pseudomonas DNA, constructed in lambda ZAPII, was screened for mannanase-expressing clones using the dye-labelled substrate, azo-carob galactomannan. The nucleotide sequence of the pseudomonad insert from a mannanase-positive clone revealed a single open reading frame of 1257 bp encoding a protein of M(r) 46,938. The deduced N-terminal sequence of the putative polypeptide conformed to a typical prokaryotic signal peptide. Truncated derivatives of the mannanase, lacking 54 and 16 residues from the N- and C-terminus respectively of the mature form of the enzyme, did not exhibit catalytic activity. Inspection of the primary structure of the mannanase did not reveal any obvious linker sequences or protein motifs characteristic of the non-catalytic domains located in other Pseudomonas plant cell wall hydrolases. These data indicate that the mannanase is non-modulator, comprising a single catalytic domain. Comparison of the mannanase sequence with those in the SWISSPROT database revealed greatest sequence homology with the mannanase from Bacillus sp. Thus the Pseudomonas enzyme belongs to glycosyl hydrolase Family 26, a family containing mannanases and endoglucanases. Analysis of the substrate specificity of the mannanase showed that the enzyme hydrolysed mannan and galactomannan, but displayed little activity towards other polysaccharides located in the plant cell wall. The enzyme had a pH optimum of approx. 7.0, was resistant to proteolysis and had an M(r) of 46,000 when expressed by Escherichia coli.

Epithelial sorting of a glycosylphosphatidylinositol-anchored bacterial protein expressed in polarized renal MDCK and intestinal Caco-2 cells

To evaluate whether a glycosylphosphatidylinositol (GPI) anchor can function as a protein sorting signal in polarized intestinal epithelial cells, the GPI-attachment sequence from Thy-1 was fused to bacterial endoglucanase E' (EGE') from Clostridium thermocellum and polarity of secretion of the chimeric EGE'-GPI protein was evaluated. The chimeric EGE'-GPI protein was shown to be associated with a GPI anchor by TX-114 phase-partitioning and susceptibility to phosphoinositol-specific phospholipase C. In polarized MDCK cells, EGE' was localized almost exclusively to the apical cell surface, while in polarized intestinal Caco-2 cells, although 80% of the extracellular form of the enzyme was routed through the apical membrane over a 24 hour period, EGE' was also detected at the basolateral membrane. Rates of delivery of EGE'-GPI to the two membrane domains in Caco-2 cells, as determined with a biotinylation protocol, revealed apical delivery was approximately 2.5 times that of basolateral. EGE' delivered to the basolateral cell surface was transcytosed to the apical surface. These data indicate that a GPI anchor does represent a dominant apical sorting signal in intestinal epithelial cells. However, the mis-sorting of a proportion of EGE'GPI to the basolateral surface of Caco-2 cells provides an explanation for additional sorting signals in the ectodomain of some endogenous GPI-anchored proteins.

Isolation of four major subunits from Clostridium thermocellum cellulosome and their synergism in the hydrolysis of crystalline cellulose

The cellulosome of Clostridium thermocellum, purified by affinity chromatography, was dissociated under mild conditions and separated by SDS-PAGE. Two major p-nitrophenylcellobiosidases (PNPCases I and II) corresponding to the S5 (103 kDa) and S8 (78 kDa) subunits and one major carboxymethylcellulase (CMCase) coinciding with the S11 (60.5 kDa) subunit were isolated and characterized using carboxymethylcellulose (CMC), H3PO4-swollen cellulose and cello-oligosaccharides. Both PNPCases showed little effect on the viscosity of CMC and released twice as much total sugar as reducing sugar from H3PO4-swollen cellulose. The CMCase released ten times more total sugar than reducing sugar from H3PO4-swollen cellulose and reduced the viscosity of CMC rapidly. None of these enzymes was active on cellotriose. Both PNPCases released cellobiose from cellotetraose, and cellobiose and cellotriose from cellopentaose. In contrast, CMCase was active only on cellopentaose and released mainly glucose. Use of MeUmb(Glc)n revealed that both PNPCases cleaved preferentially either the second or fourth linkage from the non-reducing end while the CMCase was specific for the internal glycosidic bonds. Thus, the PNPCases and CMCase behaved as typical exo- and endoglucanases, respectively. When tested individually, all three enzymes degraded Avicel only to a small extent. A 1.5-2.0-fold increase in sugar release was observed when CMCase was combined with either PNPCase I, II or both. Combining S1 with either PNPCase II or CMCase resulted in fourfold synergism in the hydrolysis of Avicel. Synergism was sevenfold when all three enzymes were combined with S1.

Cloning and expression of the Clostridium thermocellum celS gene in Escherichia coli

Clostridium thermocellum ATCC 27405 produces an extremely complicated multi-component cellulase aggregate (cellulosome) highly active on crystalline cellulose. From the cellulosome, two subunits, CelS (or Ss; M(r) = 82,000) and CelL (or SL, CipA; M(r) = 250,000), have been identified as essential for crystalline cellulose degradation [Wu et al. (1988) Biochemistry 27:1703]. We have determined the DNA sequence of the celS gene from four cloned DNA fragments encompassing this gene [Wang et al. (1993) J Bacteriol 175:1293]. To express the entire celS gene in Escherichia coli, the celS structural gene was amplified by the polymerase chain reaction (PCR) employing the PCR primers corresponding to sequences flanking the desired gene. This PCR product (2.1 x 10(3) bases; 2.1 kb) was cloned into an E. coli expression vector pRSET B. Subsequent expression of the cloned gene resulted in a fusion protein (rCelS; M(r) = 86,000) as inclusion bodies. The rCelS protein was recognized specifically by an anti-CelS antiserum in a Western blot analysis. The inclusion bodies were purified and solubilized in 5 M urea. The refolded rCelS produced very little reducing sugar from carboxymethylcellulose. However, it showed a higher activity on the crystalline cellulose (Avicel) and an even higher activity on phosphoric-acid-swollen Avicel. These results indicate that the CelS is an exoglucanase.

Xylanase B from Neocallimastix patriciarum contains a non-catalytic 455-residue linker sequence comprised of 57 repeats of an octapeptide

A Neocallimastix patriciarum cDNA library was screened for xylanase-expressing clones, which were distinct from the previously characterized N. patriciarum xynA cDNA encoding xylanase A. A single cDNA, designated xynB, which did not exhibit homology with xynA, was isolated. Northern-blot analysis of mRNA from Avicel-grown N. patriciarum showed that xynB hybridized to a 3.4 kb mRNA species. The nucleotide sequence of xynB revealed a single open reading frame of 2580 bp coding for a protein designated xylanase B (XYLB), of M(r) 88,066. The primary structure of XYLB was comprised of a 21-residue N-terminal signal peptide, followed by a 304-amino acid sequence that exhibited substantial homology with the catalytic domains of family F xylanases. The N-terminal domain was linked to a C-terminal 70-residue sequence by a putative linker region, comprising 12 tandem repeats of a sequence containing TLPG as the core sequence, followed by an octapeptide XSKTLPGG where X can be S, K or N, which was repeated in tandem 45 times. Truncated derivatives of xynB encoding the N-terminal 338 residues directed the synthesis of a functional xylanase, confirming that the region of XYLB, which exhibited homology with family F xylanases, constitutes the catalytic domain. To investigate the catalytic properties of XYLB, the catalytic domain was fused to the Escherichia coli maltose-binding protein, and the fusion protein purified by amylose affinity chromatography. The purified enzyme hydrolysed oat, rye and wheat arabinoxylan releasing primarily xylobiose, xylotriose and some xylose. The XYLB fusion did not cleave any cellulosic substrates. The data presented in this report suggest that the multiple xylanases of N. patriciarum arose, not through the duplication of a single gene, but by the transfer of distinct xylanase-encoding DNA sequences into the anaerobic fungus. The possible origin of the xynB gene is discussed.

Intronless celB from the anaerobic fungus Neocallimastix patriciarum encodes a modular family A endoglucanase

The cDNA designated celB from the anaerobic rumen fungus Neocallimastix patriciarum contained a single open reading frame of 1422 bp coding for a protein (CelB) of M(r) 53,070. CelB expressed by Escherichia coli harbouring the full-length gene hydrolysed carboxymethylcellulose in the manner of an endoglucanase, but was most active against barley beta-glucan. It also released reducing sugar from xylan and lichenan, but was inactive against crystalline cellulose, laminarin, mannan, galactan and arabinan. The rate of hydrolysis of cellulo-oligosaccharides by CelB increased with increasing chain length from cellotriose to cellopentaose. The predicted structure of CelB contained features indicative of modular structure. The first 360 residues of CelB constituted a fully functional catalytic domain that was homologous with bacterial endoglucanases belonging to cellulase family A, including five which originate from three different species of anaerobic rumen bacteria. Downstream from this domain, and linked to it by a serine/threonine-rich hinge, was a non-catalytic domain containing short tandem repeats, homologous to the C-terminal repeats contained in xylanase A from the same anaerobic fungus. Unlike previous fungal cellulases, genomic celB was devoid of introns. This lack of introns and the homology of its encoded product with rumen bacterial endoglucanases suggest that acquisition of celB by the fungus may at some stage have involved horizontal gene transfer from a prokaryote to N. particiarum.

The biological degradation of cellulose

Cellulolytic microorganisms play an important role in the biosphere by recycling cellulose, the most abundant carbohydrate produced by plants. Cellulose is a simple polymer, but it forms insoluble, crystalline microfibrils, which are highly resistant to enzymatic hydrolysis. All organisms known to degrade cellulose efficiently produce a battery of enzymes with different specificities, which act together in synergism. The study of cellulolytic enzymes at the molecular level has revealed some of the features that contribute to their activity. In spite of a considerable diversity, sequence comparisons show that the catalytic cores of cellulases belong to a restricted number of families. Within each family, available data suggest that the various enzymes share a common folding pattern, the same catalytic residues, and the same reaction mechanism, i.e. either single substitution with inversion of configuration or double substitution resulting in retention of the beta-configuration at the anomeric carbon. An increasing number of three-dimensional structures is becoming available for cellulases and xylanases belonging to different families, which will provide paradigms for molecular modeling of related enzymes. In addition to catalytic domains, many cellulolytic enzymes contain domains not involved in catalysis, but participating in substrate binding, multi-enzyme complex formation, or possibly attachment to the cell surface. Presumably, these domains assist in the degradation of crystalline cellulose by preventing the enzymes from being washed off from the surface of the substrate, by focusing hydrolysis on restricted areas in which the substrate is synergistically destabilized by multiple cutting events, and by facilitating recovery of the soluble degradation products by the cellulolytic organism. In most cellulolytic organisms, cellulase synthesis is repressed in the presence of easily metabolized, soluble carbon sources and induced in the presence of cellulose. Induction of cellulases appears to be effected by soluble products generated from cellulose by cellulolytic enzymes synthesized constitutively at a low level. These products are presumably converted into true inducers by transglycosylation reactions. Several applications of cellulases or hemicellulases are being developed for textile, food, and paper pulp processing. These applications are based on the modification of cellulose and hemicellulose by partial hydrolysis. Total hydrolysis of cellulose into glucose, which could be fermented into ethanol, isopropanol or butanol, is not yet economically feasible. However, the need to reduce emissions of greenhouse gases provides an added incentive for the development of processes generating fuels from cellulose, a major renewable carbon source.

Evidence for a general role for high-affinity non-catalytic cellulose binding domains in microbial plant cell wall hydrolases

Cellulases expressed by Cellulomonas fimi consist of a catalytic domain and a discrete non-catalytic cellulose-binding domain (CBD). To establish whether CBDs are common features of plant cell-wall hydrolases from C. fimi, the molecular architecture of xylanase D (XYLD) from this bacterium was investigated. The gene encoding XYLD, designated xynD, consisted of an open reading frame of 1936 bp encoding a protein of M(r) 68,000. The deduced primary sequence of XYLD was confirmed by the size (64 kDa) and N-terminal sequence of the purified recombinant xylanase. Biochemical analysis of the purified enzyme revealed that XYLD is an endoacting xylanase which displays no detectable activity against polysaccharides other than xylan. The predicted primary structure of XYLD comprised an N-terminal signal peptide followed by a 190-residue domain that exhibited significant homology to Family-G xylanases. Truncated derivatives of xynD, encoding the N-terminal 193 amino acids of mature XYLD directed the synthesis of a functional xylanase, confirming that the 190-residue N-terminal sequence constitutes the catalytic domain. The remainder of the enzyme consisted of two approximately 90-residue domains, which exhibited extensive homology with each other, and limited sequence identity with CBDs from other polysaccharide hydrolases. Between the two putative CBDs is a 197-amino-acid sequence that exhibits substantial homology with Rhizobium NodB proteins. The four discrete domains in XYLD were separated by either threonine/proline-or novel glycine-rich linker regions. Although full-length XYLD adsorbed to cellulose, truncated derivatives of the enzyme lacking the C-terminal CBD hydrolysed xylan but did not bind to cellulose.(ABSTRACT TRUNCATED AT 250 WORDS)

A modular esterase from Pseudomonas fluorescens subsp. cellulosa contains a non-catalytic cellulose-binding domain

The 5' regions of genes xynB and xynC, coding for a xylanase and arabinofuranosidase respectively, are identical and are reiterated four times within the Pseudomonas fluorescens subsp. cellulosa genome. To isolate further copies of the reiterated xynB/C 5' region, a genomic library of Ps. fluorescens subsp. cellulosa DNA was screened with a probe constructed from the conserved region of xynB. DNA from one phage which hybridized to the probe, but not to sequences upstream or downstream of the reiterated xynB/C locus, was subcloned into pMTL22p to construct pFG1. The recombinant plasmid expressed a protein in Escherichia coli, designated esterase XYLD, of M(r) 58,500 which bound to cellulose but not to xylan. XYLD hydrolysed aryl esters, released acetate groups from acetylxylan and liberated 4-hydroxy-3-methoxycinnamic acid from destarched wheat bran. The nucleotide sequence of the XYLD-encoding gene, xynD, revealed an open reading frame of 1752 bp which directed the synthesis of a protein of M(r) 60,589. The 5' 817 bp of xynD and the amino acid sequence between residues 37 and 311 of XYLD were almost identical with the corresponding regions of xynB and xynC and their encoded proteins XYLB and XYLC. Truncated derivatives of XYLD lacking the N-terminal conserved sequence retained the capacity to hydrolyse ester linkages, but did not bind cellulose. Expression of truncated derivatives of xynD, comprising the 5' 817 bp sequence, encoded a non-catalytic polypeptide that bound cellulose. These data indicate that XYLD has a modular structure comprising of a N-terminal cellulose-binding domain and a C-terminal catalytic domain.

Structural features of the Clostridium thermocellum cellulase SS gene

The Clostridium thermocellum cellulase SS is a subunit of the extracellular cellulase complex (cellulosome). It has previously been shown that SS, hydrolyzes crystalline cellulose synergistically with another subunit, SL. To study this synergism further, the authors cloned the gene coding for SS (celS) and compared its sequence to other known cel genes. The celS, although unique in its DNA sequence, has many structural features similar to those found in other cel genes. These features include a ribosome biding site, signal peptide sequence, the existence of a conserved reiterated amino acid sequence, and a palindromic structure downstream from its open reading frame.

Analyses of the gene and amino acid sequence of the Prevotella (Bacteroides) ruminicola 23 xylanase reveals unexpected homology with endoglucanases from other genera of bacteria

The DNA sequence for the xylanase gene from Prevotella (Bacteroides) ruminicola 23 was determined. The xylanase gene encoded for a protein with a molecular weight of 65,740. An apparent leader sequence of 22 amino acids was observed. The promoter region for expression of the xylanase gene in Bacteroides species was identified with a promoterless chloramphenicol acetyltransferase gene. A region of high amino acid homology was found with the proposed catalytic domain of endoglucanases from several organisms, including Butyrivibrio fibrisolvens, Ruminococcus flavefaciens, and Clostridium thermocellum. The cloned xylanase was found to exhibit endoglucanase activity against carboxymethyl cellulose. Analysis of the codon usage for the xylanase gene found a bias towards G and C in the third position in 16 of 18 amino acids with degenerate codons.

Nucleotide sequence of the celG gene of Clostridium thermocellum and characterization of its product, endoglucanase CelG

The nucleotide sequence of the celG gene of Clostridium thermocellum, encoding endoglucanase CelG, was determined. The open reading frame extended over 1,698 bp and encoded a 566-amino-acid polypeptide (molecular weight of 63,128) similar to the C. thermocellum endoglucanase CelB (51.5% identical residues). The N terminus displayed a typical signal peptide, followed by a catalytic domain. The C terminus, which was separated from the catalytic domain by a 25-amino-acid segment rich in Pro, Thr, and Ser, contained two conserved stretches of 22 amino acids closely similar to those previously described in other cellulases from the same organism. Expression of the gene in Escherichia coli was increased by fusing the fragment coding for the catalytic domain in frame with the start of the lacZ' gene present in the vector. A low- and a high-M(r) form of the protein were purified. The two forms displayed identical enzymatic properties. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that both forms consist of a major polypeptide of M(r) 50,000 and two minor polypeptides of M(r)s 49,000 and 48,000, resulting from heterogeneous proteolytic cleavage at the C terminus. An antiserum raised against the forms purified from E. coli reacted with an immunoreactive polypeptide of M(r) 66,000, which was associated with the extracellular cellulolytic complex of C. thermocellum known as the cellulosome.

Secretion of a prokaryotic cellulase in bacterial and mammalian cells

The catalytic domain of mature Clostridium thermocellum endoglucanase E (EGE') and derivatives of the enzyme fused to prokaryote and eukaryote signal peptides (SP), were produced in Chinese hamster ovary (CHO) cells and Escherichia coli. All three forms of the endoglucanase were secreted into the periplasm of Escherichia coli, but only derivatives of the enzyme containing an N-terminal SP were exported from CHO cells. Extracellular EGE', purified from E. coli and CHO cultures, displayed similar properties suggesting that glycosylation of the enzyme in the eukaryote did not significantly alter the protein's properties. Data presented in this report indicate that mature EGE' contains secretion signals which are recognised only by the E. coli protein export apparatus, suggesting that there are differences in the recognition of certain secretion signals in eukaryotes and prokaryotes. As mature EGE' does not contain secretion signals recognised by the mammalian cell, membrane translocation of the bacterial cellulase in a higher eukaryote is directed by an N-terminal prokaryotic SP.

Cloning and DNA sequence of the gene coding for Clostridium thermocellum cellulase Ss (CelS), a major cellulosome component

Clostridium thermocellum ATCC 27405 produces an extracellular cellulase system capable of hydrolyzing crystalline cellulose. The enzyme system involves a multicomponent protein aggregate (the cellulosome) with a total molecular weight in the millions, impeding mechanistic studies. However, two major components of the aggregate, SS (M(r) = 82,000) and SL (M(r) = 250,000), which act synergistically to hydrolyze crystalline cellulose, have been identified (J. H. D. Wu, W. H. Orme-Johnson, and A. L. Demain, Biochemistry 27:1703-1709, 1988). To further study this synergism, we cloned and sequenced the gene (celS) coding for the SS (CelS) protein by using a degenerate, inosine-containing oligonucleotide probe whose sequence was derived from the N-terminal amino acid sequence of the CelS protein. The open reading frame of celS consisted of 2,241 bp encoding 741 amino acid residues. It encoded the N-terminal amino acid sequence and two internal peptide sequences determined for the native CelS protein. A putative ribosome binding site was identified at the 5' end of the gene. A putative signal peptide of 27 amino acid residues was adjacent to the N terminus of the CelS protein. The predicted molecular weight of the secreted protein was 80,670. The celS gene contained a conserved reiterated sequence encoding 24 amino acid residues found in proteins encoded by many other clostridial cel or xyn genes. A palindromic structure was found downstream from the open reading frame. The celS gene is unique among the known cel genes of C. thermocellum. However, it is highly homologous to the partial open reading frame found in C. cellulolyticum and in Caldocellum saccharolyticum, indicating that these genes belong to a new family of cel genes.

Manipulation of the repertoire of digestive enzymes secreted into the gastrointestinal tract of transgenic mice

In non-ruminant livestock the energy which can be derived from dietary cellulose and xylan is limited by the inefficient microbial fermentation of these polymers in the hind-gut. Furthermore, in poultry, cereal-derived plant structural polysaccharides impair normal digestive function through the formation of gel-like structures, which trap nutrients rendering them unavailable to the animal. The nutrition of non-ruminant livestock could be significantly improved by the depolymerization of plant structural polysaccharides, through the introduction of cellulase activity into the small intestines of these animals. Here we describe the expression of Clostridium thermocellum endoglucanase E in the exocrine pancreas of transgenic mice. A non-glycosylated active enzyme is secreted into the small intestines, and is resistant to proteolytic inactivation, demonstrating the feasibility of generating non-ruminant animals with the endogenous capacity to depolymerize plant structural polysaccharides in the small intestines.

Purification and properties of two truncated endoglucanases produced in Escherichia coli harbouring Clostridium cellulolyticum endoglucanase gene celCCD

The endoglucanase gene, celCCD, of Clostridium cellulolyticum has been expressed in Escherichia coli. Multiple active polypeptides were detected in the E. coli cells. The relative molecular mass (M(r)) of two major active polypeptides were 56,000 (D56) and 38,000 (D38), which were smaller than the deduced M(r) of the mature protein (63,401). D56 and D38 were purified from the periplasmic fraction. The N-terminal sequences of the two purified polypeptides were identical to that of the mature endoglucanase (Ala-Ile-Asn-Ser-Gln-Asp-Met-Val---) deduced from the nucleotide sequence. These data indicated that these polypeptides were produced by processing the original mature protein in the C-terminal region. The enzymatic properties of these two polypeptides were very similar, except that the specific activity of D38 was 2-3.5-fold higher than that of D56, and D38 was more heat stable than D56.

Cellulose degradation by Clostridium thermocellum: from manure to molecular biology

Clostridium thermocellum, a Gram-positive, thermophilic anaerobe produces a highly active cellulase system. This system, termed the cellulosome, is a complex composed of at least 14-18 different types of components organized around a large, cellulose-binding protein. Combining recombinant DNA technology and protein biochemistry has proved to be a successful approach in unravelling some important features of the system.

Homologous catalytic domains in a rumen fungal xylanase: evidence for gene duplication and prokaryotic origin

A cDNA (xynA), encoding xylanase A (XYLA), was isolated from a cDNA library, derived from mRNA extracted from the rumen anaerobic fungus, Neocallimastix patriciarum. Recombinant XYLA, purified from Escherichia coli harbouring xynA, had a M(r) of 53,000 and hydrolysed oat-spelt xylan to xylobiose and xylose. The enzyme did not hydrolyse any cellulosic substrates. The nucleotide sequence of xynA revealed a single open reading frame of 1821 bp coding for a protein of M(r) 66,192. The predicted primary structure of XYLA comprised an N-terminal signal peptide followed by a 225-amino-acid repeated sequence, which was separated from a tandem 40-residue C-terminal repeat by a threonine/proline linker sequence. The large N-terminal reiterated regions consisted of distinct catalytic domains which displayed similar substrate specificities to the full-length enzyme. The reiterated structure of XYLA suggests that the enzyme was derived from an ancestral gene which underwent two discrete duplications. Sequence comparison analysis revealed significant homology between XYLA and bacterial xylanases belonging to cellulase/xylanase family G. One of these homologous enzymes is derived from the rumen bacterium Ruminococcus flavefaciens. The homology observed between XYLA and a rumen prokaryote xylanase could be a consequence of the horizontal transfer of genes between rumen prokaryotes and lower eukaryotes, either when the organisms were resident in the rumen, or prior to their colonization of the ruminant. It should also be noted that Neocallimastix XYLA is the first example of a xylanase which consists of reiterated sequences. It remains to be established whether this is a common phenomenon in other rumen fungal plant cell wall hydrolases.

Characterization of the gene celD and its encoded product 1,4-beta-D-glucan glucohydrolase D from Pseudomonas fluorescens subsp. cellulosa

A genomic library of Pseudomonas fluorescens subsp. cellulosa DNA constructed in pUC18 and expressed in Escherichia coli was screened for recombinants expressing 4-methylumbelliferyl beta-D-glucoside hydrolysing activity (MUGase). A single MUGase-positive clone was isolated. The MUGase hydrolysed cellobiose, cellotriose, cellotetraose, cellopentaose and cellohexaose to glucose, by sequentially cleaving glucose residues from the non-reducing end of the cello-oligosaccharides. The Km values for cellobiose and cellohexaose hydrolysis were 1.2 mM and 28 microM respectively. The enzyme exhibited no activity against soluble or insoluble cellulose, xylan and xylobiose. Thus the MUGase is classified as a 1,4-beta-D-glucan glucohydrolase (EC 3.2.1.74) and is designated 1,4-beta-D-glucan glucohydrolase D (CELD). When expressed by E. coli, CELD was located in the cell-envelope fraction; a significant proportion of the native enzyme was also associated with the cell envelope when synthesized by its endogenous host. The nucleotide sequence of the gene, celD, which encodes CELD, revealed an open reading frame of 2607 bp, encoding a protein of M(r) 92,000. The deduced primary structure of CELD was confirmed by the M(r) of CELD (85,000) expressed by E. coli and P. fluorescens subsp. cellulosa, and by the experimentally determined N-terminus of the enzyme purified from E. coli, which showed identity with residues 52-67 of the celD translated sequence. The structure of the N-terminal region of full-length CELD was similar to the signal peptides of P. fluorescens subsp. cellulosa plant-cell-wall hydrolases. Deletion of the N-terminal 47 residues of CELD solubilized MUGase activity in E. coli. CELD exhibited sequence similarity with beta-glucosidase B of Clostridium thermocellum, particularly in the vicinity of the active-site aspartate residue, but did not display structural similarity with the mature forms of cellulases and xylanases expressed by P. fluorescens subsp. cellulosa.

DNA sequence and transcription of an endoglucanase gene from Prevotella (Bacteroides) ruminicola AR20

The endoglucanase gene was sequenced from Prevotella ruminicola AR20, isolated as clone pJW4. The endoglucanase (BrEND) is encoded by an open reading frame (ORF1) of 501 codons, corresponding to a protein of calculated molecular weight 55.7 kDa. Analysis of proteins on SDS-PAGE revealed a protein corresponding to the calculated molecular weight of the processed BrEND. The protein showed substantial homology to members of the A4 sub-family cellulases. Primer extension studies revealed that transcription of celA is initiated at different sites in Escherichia coli and Prevotella ruminicola. E. coli sigma 70 recognition sequences were identified, which were located upstream from the transcription initiation site (TIS) functional in E. coli. A longer extension product was identified using RNA from P. ruminicola, indicating that the gene may normally be transcribed as part of a polycistronic message. The end of the primer extension product corresponded to a site beyond the 5' boundary of the cloned fragment, thus preventing identification of native promoter sequences. A second ORF of 110 codons (ORF2) was identified on the antisense strand, and primer extension indicated that transcription through ORF2 was initiated at an identical site in both E. coli and P. ruminicola. E. coli-like consensus sequences were located at positions -10 and -35 upstream from this site, suggesting that some promoter sequences in P. ruminicola are similar to E. coli consensus sequences, although others recognized by E. coli are non-functional in P. ruminicola.(ABSTRACT TRUNCATED AT 250 WORDS)

Primary sequence analysis of Clostridium cellulovorans cellulose binding protein A

The cbpA gene for the Clostridium cellulovorans cellulose binding protein (CbpA), which is part of the multisubunit cellulase complex, has been cloned and sequenced. When cbpA was expressed in Escherichia coli, proteins capable of binding to crystalline cellulose and of interacting with anti-CbpA were observed. The cbpA gene consists of 5544 base pairs and encodes a protein containing 1848 amino acids with a molecular mass of 189,036 Da. The open reading frame is preceded by a Gram-positive-type ribosome binding site. A signal peptide sequence of 28 amino acids is present at its N terminus. The encoded protein is highly hydrophobic with extremely high levels of threonine and valine residues. There are two types of putative cellulose binding domains of approximately 100 amino acids that are slightly hydrophilic and eight conserved, highly hydrophobic beta-sheet regions of approximately 140 amino acids. These latter hydrophobic regions may be the CbpA domains that interact with the different enzymatic subunits of the cellulase complex.

The use of chimeric gene constructs to express a bacterial endoglucanase in mammalian cells

The synthesis and secretion of a truncated Clostridium thermocellum endoglucanase (EGE') encoded by the celE' gene was investigated in Chinese hamster ovary (CHO) cells. Fusion genes consisting of the human growth hormone (hGH) gene and celE', transcribed from the SV40 early enhancer/promoter, were constructed and stably transfected into CHO cells. A gene consisting of celE' inserted into the first exon of the hGH gene resulted in the synthesis of truncated proteins (less than or equal to 22 kDa) lacking endoglucanase activity. Cloning celE' into the second exon of the hGH gene, resulted in the synthesis and secretion of a 50 kDa protein with endoglucanase activity. A 50 kDa protein was also synthesised by cells transfected with celE' cloned into the fifth exon of the hGH gene. However, despite a 5-fold increase in enzyme activity compared to the exon 2 transfected cell line less than 40% of the protein was secreted. Constructs devoid of introns, in which celE' was fused to the SV40 early promoter and to the rabbit beta-globin polyadenylation sequence resulted in a 2-18-fold increase in endoglucanase activity compared to the constructs containing introns. In addition more than 75% of the synthesised protein was secreted. Analyses of EGE' encoded mRNA from the transfected cell lines suggests that the presence of introns results in the aberrant splicing of message by the use of cryptic splice sites in the celE' gene. These results demonstrate that introns are not required for the efficient expression of a bacterial endoglucanase in mammalian cells, rather introns appear to reduce expression of the encoded protein.

A bifunctional xylanase encoded by the xynA gene of the rumen cellulolytic bacterium Ruminococcus flavefaciens 17 comprises two dissimilar domains linked by an asparagine/glutamine-rich sequence

The nucleotide sequence of the xynA gene of Ruminococcus flavefaciens 17 was determined and found to consist of a 2862bp open reading frame beginning with a TTG start codon. The predicted product, XYLA, consisted of distinct amino-terminal (A) and carboxy terminal (C) domains (248 amino acids, including a putative signal sequence, and 332 amino acids, respectively) linked by a repetitive sequence (B, 374 amino acids) extraordinarily rich in asparagine (45%) and glutamine (26%) residues. Domains A and C were shown to be capable of expressing xylanase activity independently of each other when suitably truncated derivatives of the xynA coding region were expressed as lacZ fusions. The activities associated with the two domains were shown to differ with respect to the average size of hydrolysis products formed from oat-spelt xylan, with domain C releasing relatively more xylose and domain A more xylo-oligosaccharides. The amino acid sequence of domain A of XYLA closely resembled that of the Bacillus pumilus xynA enzyme (45% identical residues). On the other hand domain C showed significant similarity (33% to 40% identical residues) to a different group of bacterial xylanases and exoglucanases exemplified by the Caldocellum saccharolyticum xynA and celB products. The xynA product is, therefore, a bifunctional enzyme having two dissimilar catalytic domains capable of acting on xylan.

Structure of the Clostridium thermocellum gene licB and the encoded beta-1,3-1,4-glucanase. A catalytic region homologous to Bacillus lichenases joined to the reiterated domain of clostridial cellulases

The nucleotide sequence of the Clostridium thermocellum gene licB, coding for a thermoactive beta-1,3-1,4-glucanase, has been determined. The gene is located downstream, but in opposite orientation to the beta-glucosidase gene bglA. A coding region of 1002 bp is flanked by canonical promoter and transcription terminator sequences. The primary translation product of the licB gene has a predicted molecular mass of 37,896 Da. The protein sequence can be divided into several discrete segments: an N-terminal signal peptide, a catalytic region, a segment rich in Pro and Thr residues and a C-terminal reiterated domain. The catalytic region shows close similarity to lichenases of bacilli (52-58% identity) and Fibrobacter succinogenes (35% identity), but is unrelated to barley beta-1,3-1,4-glucanases. It consists of two domains, which in the case of the F. succinogenes lichenase are arranged in reversed order to that of C. thermocellum and Bacillus lichenases. The C-terminal reiterated domain of C. thermocellum lichenase is homologous to the duplicated non-catalytic domain of endo-beta-1,4-glucanases and xylanase Z from the same organism. This domain is considered a characteristic feature of clostridial cellulases organized as multienzyme complex (cellulosome). The beta-1,3-1,4-glucanase encoded by the licB gene might therefore be an additional enzyme component of the C. thermocellum cellulosome.

Characterization and comparison of Clostridium cellulovorans endoglucanases-xylanases EngB and EngD hyperexpressed in Escherichia coli

By the use of a T7 expression system, endoglucanases-xylanases EngB and EngD from Clostridium cellulovorans were hyperexpressed and purified from Escherichia coli. The two enzymes demonstrated both endoglucanase and xylanase activities. The substrate specificities of both endoglucanases were similar except that EngD had four-times-greater p-nitrophenyl beta-1,4-cellobiosidase activity. The two proteins were very homologous (80%) up to the Pro-Thr-Thr region which divided the protein into -NH2- and -COOH-terminals. The -COOH- region of EngB has high homology to the endoglucanases and a xylanase from Clostridium thermocellum and to an endoglucanase from Clostridium cellulolyticum and did not show strong binding to cellulose (Avicel). However, the -COOH- region of EngD, which had homology to the cellulose-binding domains of Cellulomonas fimi exo- and endoglucanases and to Pseudomonas fluorescens endoglucanase, demonstrated binding ability to cellulose even when the domain was fused to the N-terminal domain of EngB. By probing the Avicel-purified cellulase complex (F8) with anti-EngB and anti-EngD antibodies, both EngB and EngD were shown to be present on the cellulase complex of C. cellulovorans. Many proteins homologous to EngB and EngD were also present on the complex.

Characterization of endoglucanase A from Clostridium cellulolyticum

A construction was carried out to obtain a high level of expression in Escherichia coli of the gene celCCA, coding for the endoglucanase A from Clostridium cellulolyticum (EGCCA). The enzyme was purified in two forms with different molecular weights, 51,000 and 44,000. The smaller protein was probably the result of proteolysis, although great care was taken to prevent this process from occurring. Evidence was found for the loss of the conserved reiterated domains which are characteristic of C. thermocellum and C. cellulolyticum cellulases. The two forms were extensively studied, and it was demonstrated that although they had the same pH and temperature optima, they differed in their catalytic properties. The truncated protein gave the more efficient catalytic parameters on carboxymethyl cellulose and showed improved endoglucanase characteristics, whereas the intact enzyme showed truer cellulase characteristics. The possible role of clostridial reiterated domains in the hydrolytic activity toward crystalline cellulose is discussed.

Nucleotide sequence of the cellulase gene celF of Clostridium thermocellum

The nucleotide sequence of the celF gene of Clostridium thermocellum was determined. The open reading frame extended over 2217 bp. The encoded 739-aa polypeptide, CelF, with a Mw = 82,015, was an endoglucanase with activity against carboxymethylcellulose. The N terminus showed a typical signal peptide, and a cleavage site after Ala-27 was predicted. From residues 28 to 470, the sequence of CelF was related to the catalytic domains of type E2 endoglucanases, with a strong homology to the endoglucanases CelZ of Clostridium stercorarium and CenB of Cellulomonas fimi. The catalytic region was followed by a 134-aa segment also present in C. stercorarium CelZ and in C. fimi CenB, and belonging to the family of non-catalytic, presumably cellulose-binding domains first identified in Bacillus subtilis endoglucanase. A 21-aa segment rich in Pro/Thr/Ser residues separated the putative cellulose-binding region from the COOH-terminal region, which contained two conserved stretches of 24 amino acids closely similar to those previously described in endoglucanases CelA, CelB, CelD, CelE, CelH and CelX, and xylanase XynZ of C. thermocellum.

Cloning and expression of a Clostridium thermocellum DNA fragment that encodes a protein related to cellulosome component SL

Antibodies raised against the SL subunit of the Clostridium thermocellum cellulosome were used to screen a library of C. thermocellum chromosomal DNA fragments constructed in the vector lambda gt11. A DNA fragment that encoded a polypeptide that crossreacted with the anti-SL antibodies was isolated and its restriction map elucidated. No similarity with other previously cloned DNA fragments has been found. The anti-SL crossreacting polypeptide was isolated from recombinant Escherichia coli and found to have a mol mass of 37,000 Da and to possess low levels of CMCase and Avicelase activity. Using CMC as the substrate, a temperature optimum of 55 degrees C and a pH optimum of 6.6 were observed. These properties were compared to those of C. thermocellum SL isolated by electroelution from an SDS gel, which was also found to possess low levels of CMCase and Avicelase activities. In addition, the SL proteins produced in C. thermocellum and E. coli were able to interact positively against Avicel with an endoglucanase (Ss) purified from the C. thermocellum crude cellulase preparation, and with a recombinant protein that crossreacted with anti-Ss antibodies.

The cellodextrinase from Pseudomonas fluorescens subsp. cellulosa consists of multiple functional domains

A genomic library of Pseudomonas fluorescens subsp. cellulosa DNA was constructed in pUC18 and Escherichia coli recombinants expressing 4-methylumbelliferyl beta-D-cellobioside-hydrolysing activity (MUCase) were isolated. Enzyme produced by MUCase-positive clones did not hydrolyse either cellobiose or cellotriose but converted cellotetraose into cellobiose and cleaved cellopentaose and cellohexaose, producing a mixture of cellobiose and cellotriose. There was no activity against CM-cellulose, insoluble cellulose or xylan. On this basis, the enzyme is identified as an endo-acting cellodextrinase and is designated cellodextrinase C (CELC). Nucleotide sequencing of the gene (celC) which directs the synthesis of CELC revealed an open reading frame of 2153 bp, encoding a protein of Mr 80,189. The deduced primary sequence of CELC was confirmed by the Mr of purified CELC (77,000) and by the experimentally determined N-terminus of the enzyme which was identical with residues 38-47 of the translated sequence. The N-terminal region of CELC showed strong homology with endoglucanase, xylanases and an arabinofuranosidase of Ps. fluorescens subsp. cellulosa; homologous sequences included highly conserved serine-rich regions. Full-length CELC bound tightly to crystalline cellulose. Truncated forms of celC from which the DNA sequence encoding the conserved domain had been deleted, directed the synthesis of a functional cellodextrinase that did not bind to crystalline cellulose. This is consistent with the N-terminal region of CELC comprising a non-catalytic cellulose-binding domain which is distinct from the catalytic domain. The role of the cellulose-binding region is discussed.

Sequences of three genes specifying xylanases in Streptomyces lividans

The entire nucleotide (nt) sequences of three genes (xlnA, xlnB and xlnC) of Streptomyces lividans encoding three distinct xylanases (Xln) have been determined. The nt sequences were confirmed by comparing the deduced amino acid (aa) sequences with the ones derived from the N-terminal aa sequences of the mature purified proteins. The N-terminus of the XlnA showed some homology with either the N-termini or the C-termini of eight other Xln and of two exo-glucanases. The N-terminus of XlnB is homologous to that of XlnC and to Xln of seven other microorganisms.

Interaction of the duplicated segment carried by Clostridium thermocellum cellulases with cellulosome components

The function of the non-catalytic, duplicated segment found in C. thermocellum cellulases was investigated. Rabbit antibodies reacting with the duplicated segment of endoglucanase CelD cross-reacted with a variety of cellulosome components ranging between 50 and 100 kDa. 125I-labeled forms of CelD and of xylanase XynZ carrying the duplicated segment bound to a set of cellulosome proteins ranging between 66 and 250 kDa, particularly to the 250 kDa SL (or S1) subunit. 125I-labeled forms of CelD and XynZ devoid of the duplicated segment failed to bind to any cellulosome protein. The duplicated segment appears thus to serve to anchor the various cellulosome subunits to the complex by binding to SL, which may be a scaffolding element of the cellulosome.

Structural and functional analysis of Trichoderma reesei endoglucanase I expressed in yeast Saccharomyces cerevisiae

The function of the domains of Trichoderma reesei endoglucanase I (EGI) has been studied. Truncated EGI proteins were expressed from the 3'-end deleted cDNAs in the yeast Saccharomyces cerevisiae under the control of the ADC1 expression cassette. EGI protein was detected by monoclonal antibody EI-2 and EGI activity as cleared zones around growing colonies on agar plates containing hydroxyethylcellulose (HEC) covalently stained with Ostazin brilliant red (OBR). The results showed that the The-Ser-rich hinge region and the conserved 'tail' are not necessary for the efficient synthesis and secretion of EGI in yeast, but the intact core region is necessary for the enzymatic activity.

Structure of the beta-glucosidase gene bglA of Clostridium thermocellum. Sequence analysis reveals a superfamily of cellulases and beta-glycosidases including human lactase/phlorizin hydrolase

The nucleotide sequence of the Clostridium thermocellum gene bglA, coding for the thermostable beta-glucosidase A, has been determined. The coding region of 1344 bp was identified by comparison with the N-terminal amino acid squence of recombinant beta-glucosidase A purified from Escherichia coli. The deduced amino acid sequence corresponds to a protein of 51,482 Da. The coding region is flanked by putative promoter and transcription terminator sequences. The protein is unrelated to beta-glucosidase B of C. thermocellum, but has a high level of similarity with other bacterial beta-glucosidases and phospho-beta-glucosidases. Similarity is also observed with the beta-galactosidase of the archaebacterium Sulfolobus solfataricus. Unexpectedly, it was found that human lactase-phlorizin hydrolase contains three copies of a sequence closely related to C. thermocellum beta-glucosidase A (up to 40% sequence identity). These diverse beta-glucosidases can therefore be grouped into an enzyme family (BGA) of common structural design. Sequence comparison by hydrophobic cluster analysis revealed that all BGA enzymes share a well conserved region which is homologous to the catalytic domain of the widely distributed cellulase family A. A distinctive feature of this domain is the sequence motif His-Asn-Glu-Pro in which the catalytic residues His and Glu are separated by 35-55 amino acid residues. The cellulase family A and the beta-glucosidase family BGA might thus be considered as members of a protein super-family comprising beta-glucanases and beta-glycosidases from all three primary kingdoms of living organisms.

Sequence of a cellulase gene from the rumen anaerobe Ruminococcus flavefaciens 17

A cellulase gene (endA) was isolated from a library of Ruminococcus flavefaciens strain 17 DNA fragments inserted in pUC13. The endA product showed activity against acid-swollen cellulose, carboxymethyl-cellulose, lichenan, cellopentaose and cellotetraose, but showed no activity against cellotriose or binding to avicel. Nucleotide sequencing indicated an encoded product of 455 amino acids which showed significant sequence similarity (ranging from 56% to 61%) with three endoglucanases from Ruminococcus albus, and with Clostridium thermocellum endoglucanase E. Little relatedness was found with a cellodextrinase previously isolated from R. flavefaciens FD1.

Nucleotide sequence analysis of the endoglucanase-encoding gene, celCCD, of Clostridium cellulolyticum

The nucleotide sequence of the Clostridium cellulolyticum endo-beta-1,4- glucanase (EGCCD)-encoding gene, celCCD, and its flanking regions, was determined. The open reading frame encodes a protein (Mr 66,061) which consists of 584 amino acids (aa). The N terminus shows the features of the typical signal peptide, with a cleavage site after Gly24. The protein could be divided into N-terminal and C-terminal regions by an intermediate Pro + Thr-rich sequence. Deletion analysis suggests the C-terminal region is not necessary for EG activity. The predicted aa sequence of the mature protein was similar to those of the central catalytic and the following C-terminal regions of the C. thermocellum endoglucanase H (EGH; identity, 58.8%). The N-terminal region resembled that of the endoglucanase, EGCCA, from C. cellulolyticum (identity, 24.7%; 336 aa) and the endoglucanase, EGE, from C. thermocellum (identity, 31.4%; 373 aa). The C-terminal regions ended with two conserved 21-aa stretches which had close similarity to each other. The C-terminal sequence was also highly similar to the reiterated domain of several EG and a xylanase from C. thermocellum, and of an EG from C. cellulolyticum.

Domains in microbial beta-1, 4-glycanases: sequence conservation, function, and enzyme families

Several types of domain occur in beta-1, 4-glycanases. The best characterized of these are the catalytic domains and the cellulose-binding domains. The domains may be joined by linker sequences rich in proline or hydroxyamino acids or both. Some of the enzymes contain repeated sequences up to 150 amino acids in length. The enzymes can be grouped into families on the basis of sequence similarities between the catalytic domains. There are sequence similarities between the cellulose-binding domains, of which two types have been identified, and also between some domains of unknown function. The beta-1, 4-glycanases appear to have arisen by the shuffling of a relatively small number of progenitor sequences.

Nucleotide sequence of the endoglucanase C gene (cenC) of Cellulomonas fimi, its high-level expression in Escherichia coli, and characterization of its products

The cenC gene of Cellulomonas fimi, encoding endoglucanase CenC, has an open reading frame of 1101 codons closely followed by a 9 bp inverted repeat. The predicted amino acid sequence of mature CenC, which is 1069 amino acids long, is very unusual in that it has a 150-amino-acid tandem repeat at the N-terminus and an unrelated 100-amino-acid tandem repeat at the C-terminus. CenC belongs to subfamily E1 of the beta-1,4-glycanases. High-level expression in Escherichia coli of cenC from a 3.6 kbp fragment of C. fimi DNA leads to levels of CenC which exceed 10% of total cell protein. Most of the CenC is in the cytoplasm in an inactive form. About 60% of the active fraction of CenC is in the periplasm. The catalytic properties of the active CenC are indistinguishable from those of native CenC from C. fimi. The Mr of CenC from E. coli and C. fimi is approximately 130 kDa. E. coli and C. fimi also produce an endoglucanase, CenC', of approximate Mr 120kDa and with the same N-terminal amino acid sequence and catalytic properties as CenC. CenC' appears to be a proteolytic product of CenC. CenC and CenC' can bind to cellulose and to Sephadex. CenC is the most active component of the C. fimi cellulase system isolated to date.

High activity of inclusion bodies formed in Escherichia coli overproducing Clostridium thermocellum endoglucanase D

The formation of cytoplasmic inclusion bodies by Escherichia coli overproducing Clostridium thermocellum endoglucanase D (EGD) was investigated. EGD was found in inclusion bodies as a 68 kDa form, whereas the size of the cytoplasmic form was 65 kDa. Upon solubilization with urea followed by dialysis, the 68 kDa form was converted to the 65 kDa species. Proteolysis occurred within the COOH-terminal, reiterated region of the 68 kDa form, which is conserved among most C. thermocellum endoglucanases, but is not required for catalytic activity. The specific activity of the enzyme embedded in inclusion bodies was close to that of the purified protein. Thus, inclusion body formation does not involve denaturation of the catalytic domain of EGD, but, more likely, the participation of the reiterated, conserved region in intermolecular interactions.

A family of clostridial and streptococcal ligand-binding proteins with conserved C-terminal repeat sequences

Analysis of the derived amino acid sequences of toxins A and B from Clostridium difficile has identified an extraordinarily large number of repeat amino acid units in the C-terminal regions of the proteins. Nearly one third of each of the proteins consist of repeating units which appear, at least in the case of toxin A, to be responsible for carbohydrate binding. Similar repeat units are also found in the C-terminal region of four glucosyltransferases from Streptococcus mutans and Streptococcus downei, and in four lytic enzymes from Streptococcus pneumoniae and its bacteriophages (HB-3, Cp-1 and Cp-9). In each case the repeats constitute the ligand-binding portion of the respective enzymes. A glucan-binding protein from S. mutans, which lacks enzymatic activity, has similar repeats spanning almost the entire molecule. This family of ligand-binding proteins appears to be of modular design, with one module consisting of a repetitive ligand-binding domain located in the C-terminal region and the other module(s) providing enzymatic functions.