Synergistic anti-inflammatory and osteogenic n-HA/resveratrol/chitosan composite microspheres for osteoporotic bone regeneration

In vitro evaluation of freeze-drying chitosan-mineralized collagen/Mg-Ca alloy composites for osteogenesis

Magnesium (Mg) alloy with good mechanical properties and biodegradability is considered as one of the ideal bone repair materials. However, the rapid corrosion of Mg-based metals can pose harm to the function of an implant in clinical applications. In this study, micro-arc oxidation coating was prepared on the surface of the Mg-Ca matrix, then the chitosan and mineralized collagen (nano-hydroxyapatite/collagen; nHAC) were immobilized on the surface of the MAO/Mg-Ca matrix to construct the CS-nHAC/Mg-Ca composites of different component proportions (the ratio of CS to nHAC is 2:1, 1:1, and 1:2, respectively). The corrosion resistance, osteogenic activity, and angiogenic ability were extensively investigated. The results indicated that the CS-nHAC reinforcement materials can improve the corrosion resistance of the Mg matrix significantly and promote the proliferation and adhesion of mouse embryo osteoblast precursor cells (MC3T3-E1) and human umbilical vein endothelial cells (HUVECs). In addition, the CS-nHAC/Mg-Ca composites can not only promote the alkaline phosphatase (ALP) activity and extracellular matrix mineralization of MC3T3-E1 cells but also enhance the migration motility and vascular endothelial growth factor (VEGF) expression of HUVECs. Meanwhile, the 2CS-1nHAC/Mg-Ca composite exhibited the optimum function characteristics compared with other samples. Therefore, considering the improvement of corrosion resistance and biocompatibility, the CS-nHAC/Mg-Ca composites are expected to be a promising orthopedic implant.

An oral hydrogel carrier for delivering resveratrol into intestine-specific target released with high encapsulation efficiency and loading capacity based on structure-selected alginate and pectin

Resveratrol (RES) has many beneficial effects on the human body, but it is always unstable, resulting in low oral bioavailability, especially in the gastrointestinal tract.

Osteoporotic bone recovery by a bamboo-structured bioceramic with controlled release of hydroxyapatite nanoparticles

While most bone defects can be repaired spontaneously, the healing process can be complicated due to insufficient bone regeneration when osteoporosis occurs. Synthetic materials that intrinsically stimulate bone formation without inclusion of exogenous cells or growth factors represent a highly desirable alternative to current grafting strategies for the management of osteoporotic defects. Herein, we developed a series of hydroxyapatite bioceramics composed of a microwhiskered scaffold (wHA) reinforced with multiple layers of releasable hydroxyapatite nanoparticles (nHA). These novel bioceramics (nwHA) are tunable to optimize the loading amount of nHA for osteoporotic bone formation. The utility of nwHA bioceramics for the proliferation or differentiation of osteoporotic osteoblasts in vitro is demonstrated. A much more compelling response is seen when bioceramics are implanted in critical-sized femur defects in osteoporotic rats, as nwHA bioceramics promote significantly higher bone regeneration and delay adjacent bone loss. Moreover, the nwHA bioceramics loaded with a moderate amount of nHA can induce new bone formation with a higher degree of ossification and homogenization. Two types of osteogenesis inside the nwHA bioceramic pores were discovered for the first time, depending on the direction of growth of the new bone. The current study recommends that these tailored hybrid micro/nanostructured bioceramics represent promising candidates for osteoporotic bone repair.

Research progress on the biological modifications of implant materials in 3D printed intervertebral fusion cages

Anterior spine decompression and reconstruction with bone grafts and fusion is a routine spinal surgery. The intervertebral fusion cage can maintain intervertebral height and provide a bone graft window. Titanium fusion cages are the most widely used metal material in spinal clinical applications. However, there is a certain incidence of complications in clinical follow-ups, such as pseudoarticulation formation and implant displacement due to nonfusion of bone grafts in the cage. With the deepening research on metal materials, the properties of these materials have been developed from being biologically inert to having biological activity and biological functionalization, promoting adhesion, cell differentiation, and bone fusion. In addition, 3D printing, thin-film, active biological material, and 4D bioprinting technology are also being used in the biofunctionalization and intelligent advanced manufacturing processes of implant devices in the spine. This review focuses on the biofunctionalization of implant materials in 3D printed intervertebral fusion cages. The surface modifications of implant materials in metal endoscopy, material biocompatibility, and bioactive functionalizationare summarized. Furthermore, the prospects and challenges of the biofunctionalization of implant materials in spinal surgery are discussed. Fig.a.b.c.d.e.f.g As a pre-selected image for the cover, I really look forward to being selected. Special thanks to you for your comments.

A single-cell transcriptome of mesenchymal stromal cells to fabricate bioactive hydroxyapatite materials for bone regeneration

The osteogenic microenvironment of bone-repairing materials plays a key role in accelerating bone regeneration but remains incompletely defined, which significantly limits the application of such bioactive materials. Here, the transcriptional landscapes of different osteogenic microenvironments, including three-dimensional (3D) hydroxyapatite (HA) scaffolds and osteogenic medium (OM), for mesenchymal stromal cells (MSCs) in vitro were mapped at single-cell resolution. Our findings suggested that an osteogenic process reminiscent of endochondral ossification occurred in HA scaffolds through sequential activation of osteogenic-related signaling pathways, along with inflammation and angiogenesis, but inhibition of adipogenesis and fibrosis. Moreover, we revealed the mechanism during OM-mediated osteogenesis involves the ZBTB16 and WNT signaling pathways. Heterogeneity of MSCs was also demonstrated. In vitro ossification of LRRC75A⁺ MSCs was shown to have better utilization of WNT-related ossification process, and PCDH10⁺ MSCs with superiority in hydroxyapatite-related osteogenic process. These findings provided further understanding of the cellular activity modulated by OM conditions and HA scaffolds, providing new insights for the improvement of osteogenic biomaterials. This atlas provides a blueprint for research on MSC heterogeneity and the osteogenic microenvironment of HA scaffolds and a database reference for the application of bioactive materials for bone regeneration.

Alendronate-Decorated Nanoparticles as Bone-Targeted Alendronate Carriers for Potential Osteoporosis Treatment

Osteoporosis is a skeletal disorder characterized by a low bone mass and density. Alendronate (Alen), a second-generation bisphosphonate drug, was indicated as the first-line regimen for the treatment of osteoporosis. However, the use of Alen has been limited due to its low bioavailability and gastrointestinal side effects. Herein, Alen-decorated nanoparticles were prepared through ionic cross-linking between poly (lactic-co-glycolic acid), β-cyclodextrin-modified chitosan (PLGA-CS-CD), and Alen-modified alginate (ALG-Alen) for Alen loading and bone-targeted delivery. Alen was selected as a therapeutic drug and a bone-targeting ligand. The nanoparticles have negatively charged surfaces, and sustained release of Alen from the nanoparticles can be observed. Cytotoxicity detected using cell counting kit-8 (CCK-8) assay and lactate dehydrogenase release test on MC3T3 cells showed that the nanoparticles had good cytocompatibility. A hemolysis test showed that the hemolysis ratios of nanoparticles were <5%, indicating that the nanoparticles had no significant hemolysis effect. Moreover, the Alen-decorated nanoparticles exhibited enhanced binding affinity to the hydroxyapatite (HAp) disks compared with that of nanoparticles without Alen modification. Thus, the Alen-decorated nanoparticles might be developed as promising bone-targeted carriers for the treatment of osteoporosis.

Chitosan/gelatin-tannic acid decorated porous tape suture with multifunctionality for tendon healing

The inferior tendon healing after surgery is inextricably linked to the surgical suture. Poor load transfer along the suture often results in a high tendon re-tear rate. Besides, the severe inflammation and infection induced by sutures even cause a second surgery. Herein, to alleviate the above-mentioned issues, a multifunctional suture was fabricated by decorating chitosan/gelatin-tannic acid (CS/GE-TA) on the porous tape suture. The porous tape suture ensured the required mechanical properties and sufficient space for tissue integration. Compared to the pristine suture, the CS/GE-TA decorated suture (TA100) presented a 332% increase in pull-out force from the tendon, indicating potentially decreased re-tear rates. Meanwhile, TA100 showed superior anti-inflammatory and antibacterial performances. In vivo experiments further proved that TA100 could not only reduce inflammatory action but also facilitate collagen deposition and blood vessel formation. These results indicate that the multifunctional sutures are promising candidates for accelerating tendon healing.

[Advances in the Application of Hydroxyapatite Composite Materials in Bone Tissue Engineering]

Hydroxyapatite (HAp) is the main inorganic component of the bones and teeth, and it possesses bioactivity and biocompatibility. However, due to its poor mechanical performance, slow degradation speed, and lack of diversity in its function, it is difficult to apply HAp alone as a scaffold material for bone tissue engineering. By combining HAp with other types of materials, composite materials with specific properties can be prepared, and the scopes of HAp applications can be expanded. Firstly, we elaborated on the importance, and strengths and weaknesses of HAp for bone tissue engineering biomaterials and then reviewed the research status of HAp composite materials used in bone regeneration. Secondly, about hot research topics in the field of applying HAp composite materials in bone repair, we summarized the representative findings in the field, and discussions and analysis were made accordingly. Finally, we also examined the future development prospects of HAp composite bone repair materials.

An overview of polyester/hydroxyapatite composites for bone tissue repairing

Objectives

The polyester/hydroxyapatite (polyester/HA) composites play an important role in bone tissue repairing, mostly because they mimic the composition and structure of naturally mineralized bone tissue. This review aimed to discuss commonly used geometries of polyester/HA composites, including microspheres, membranes, scaffolds and bulks, and their applications in bone tissue repairing and to discuss existed restrictions and developing trends of polyester/HA.

Methods

The current review was conducted by searching Web of Science, and Google Scholar for relevant studies published related with polyester/HA composites. Selected studies were analyzed with a focus on the fabrication techniques, properties (mechanical properties, biodegradable properties and biological properties) and applications of polyester/HA composites in bone repairing.

Results

A total of 111 articles were introduced to discuss the review. Different geometries of polyester/HA composites were discussed. In addition, properties and applications of polyester/HA composites were evaluated. The addition of HA into polyester can adjust the mechanical and biodegradability of composites. Besides, the addition of HA into polyester can improve its osteogenic abilities. The results showed that polyester/HA composites can ideal candidate for bone tissue repairing.

Conclusion

Polyester/HA composites have many remarkable properties, such as appropriate mechanical strength, biodegradability, favorable biological properties. Diverse geometries of polyester/HA composites have been used in bone repairing, drug delivery and implant fixation. Further work needs to be done to investigate existed restrictions, including the controlled degradation rate, controlled drug release performance, well-matched mechanical properties, and novel fabrication techniques.

The translational potential of this article

The present review reveals the current state of the polyester/HA composites used in bone tissue repairing, contributing to future trends of polyester/HA composites in the forthcoming future.

Protective effects of sirtuin 3 on titanium particle-induced osteogenic inhibition by regulating the NLRP3 inflammasome via the GSK-3β/β-catenin signalling pathway

Periprosthetic osteolysis (PPO) remains the key factor in implant failure and subsequent revision surgery and is mainly triggered by wear particles. Previous studies have shown that inhibition of osteoblastic differentiation is the most widespread incident affecting the interface of trabecular and loosening prostheses. Additionally, the NLRP3 inflammasome is activated by prosthetic particles. Sirtuin3, an NAD⁺-dependent deacetylase of mitochondria, regulates the function of mitochondria in diverse activities. However, whether SIRT3 can mitigate wear debris-induced osteolysis by inhibiting the NLRP3 inflammasome and enhancing osteogenesis has not been previously reported. Therefore, we investigated the role of SIRT3 during the process of titanium (Ti) particle-induced osteolysis. We revealed that upregulated SIRT3 dramatically attenuated Ti particle-induced osteogenic inhibition through suppression of the NLRP3 inflammasome and improvement of osteogenesis in vivo and in vitro. Moreover, we found that SIRT3 interference in the process of Ti particle-induced osteolysis relied on the GSK-3β/β-catenin signalling pathway. Collectively, these findings indicated that SIRT3 may serve as a rational new treatment against debris-induced PPO by deacetylase-dependent inflammasome attenuation.

•

Effect of SIRT3 on rescued wear particles-induced osteogenic inhibition.

•

Effect of SIRT3 on inhibited the activation of pyroptosis-related NLRP3 inflammasome.

•

Effect of SIRT3 on mitigated periprosthetic osteolysis via GSK-3β/β-catenin signaling.

Advances in Osteoporotic Bone Tissue Engineering

The increase in osteoporotic fracture worldwide is urging bone tissue engineering research to find new, improved solutions both for the biomaterials used in designing bone scaffolds and the anti-osteoporotic agents capable of promoting bone regeneration. This review aims to report on the latest advances in biomaterials by discussing the types of biomaterials and their properties, with a special emphasis on polymer-ceramic composites. The use of hydroxyapatite in combination with natural/synthetic polymers can take advantage of each of their components properties and has a great potential in bone tissue engineering, in general. A comparison between the benefits and potential limitations of different scaffold fabrication methods lead to a raised awareness of the challenges research face in dealing with osteoporotic fracture. Advances in 3D printing techniques are providing the ways to manufacture improved, complex, and specialized 3D scaffolds, capable of delivering therapeutic factors directly at the osteoporotic skeletal defect site with predefined rate which is essential in order to optimize the osteointegration/healing rate. Among these factors, strontium has the potential to increase osseointegration, osteogenesis, and healing rate. Strontium ranelate as well as other biological active agents are known to be effective in treating osteoporosis due to both anti-resorptive and anabolic properties but has adverse effects that can be reduced/avoided by local release from biomaterials. In this manner, incorporation of these agents in polymer-ceramic composites bone scaffolds can have significant clinical applications for the recovery of fractured osteoporotic bones limiting or removing the risks associated with systemic administration.