Peptide-immobilized nanoporous alumina membranes for enhanced osteoblast adhesion

A label-free porous alumina interferometric immunosensor

Anodization of Al is used to produce optically smooth porous alumina (Al(2)O(3)) films with pores approximately 60 nm in diameter and approximately 6 mum deep. The capture protein, protein A, is adsorbed to the pore walls by noncovalent, electrostatic interactions, and thin film interference spectroscopy is used to detect binding of immunoglobulin (IgG). The porous alumina films are stable against corrosion and dissolution in aqueous media at pH 7, allowing quantitative monitoring of steady-state and time-resolved biomolecular binding. The bare porous Al(2)O(3) surface displays a significantly greater affinity for protein A than for IgG. The known species specificity of protein A binding to IgG is confirmed; the protein-A-modified sensor responds to IgG derived from rabbit, but not chicken (IgG/IgY). A "cascaded", or multiprobe sensing approach, is demonstrated, in which a specific target, sheep IgG, is administered to a sample modified with a protein A/rabbit anti-sheep IgG assembly. Binding measurements are confirmed by fluorescence microscopy using fluorescein-labeled IgG.

Lysine-based peptide-functionalized PLGA foams for controlled DNA delivery

Due to its hydrophobicity and negatively charged surfaces, PLGA-based scaffolds have encountered problems in controlled-release and tissue engineering applications. The effects of charge modification of PLGA micro-porous foams on DNA delivery and DNA transfection are investigated herein. Tailor-designed l-lysine peptides (K4 and K20) were employed to modify the surface charge of PLGA foams using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide and N-hydroxysuccinimide cross linkers and the effects of charge modification of PLGA were examined in three main aspects: DNA adsorption, DNA release properties and DNA transfection. Successful conjugation of peptide and DNA adsorption were verified by X-ray photoelectron spectroscopy. A plasmid encoding bone morphogenetic protein-2 (BMP2) was used throughout the current study and the results indicate that adsorption capacity and release behavior of DNA were highly dependent on the charge properties of the foam surfaces. The release rates of DNA from the K4- and K20-functionalized foams are more sustainable as compared to the blank foam. As a result, the sustained release of DNA from modified foams led to negligible cytotoxicity and sustained expression of DNA which is favorable for DNA delivery and tissue engineering application. Furthermore, the ease of fabrication and modification of PLGA foams makes it a promising DNA delivery device.

Nanostructured tantala as a template for enhanced osseointegration

The goal of current dental and orthopedic biomaterials research is to design implants that induce controlled and guided tissue growth, and rapid healing. In addition to acceleration of normal wound healing phenomena, these implants should result in the formation of a characteristic interfacial layer with adequate biomechanical properties. To achieve these goals, however, a better understanding of events at the bone-material interface is needed, as well as the development of new materials and approaches that promote osseointegration. Here we present novel nanostructured nanoarrays from tantala that can promote cell adhesion and differentiation. Our results suggest that tantala nanotube arrays enhance osteoblast cell adhesion, proliferation and differentiation. The routes of fabrication of tantala nanotube arrays are flexible and cost-effective, enabling realization of desired platform topologies on existing non-planar orthopedic implants.

Nanotechnology, nanotoxicology, and neuroscience

Nanotechnology, which deals with features as small as a 1 billionth of a meter, began to enter into mainstream physical sciences and engineering some 20 years ago. Recent applications of nanoscience include the use of nanoscale materials in electronics, catalysis, and biomedical research. Among these applications, strong interest has been shown to biological processes such as blood coagulation control and multimodal bioimaging, which has brought about a new and exciting research field called nanobiotechnology. Biotechnology, which itself also dates back approximately 30 years, involves the manipulation of macroscopic biological systems such as cells and mice in order to understand why and how molecular level mechanisms affect specific biological functions, e.g., the role of APP (amyloid precursor protein) in Alzheimer's disease (AD). This review aims (1) to introduce key concepts and materials from nanotechnology to a non-physical sciences community; (2) to introduce several state-of-the-art examples of current nanotechnology that were either constructed for use in biological systems or that can, in time, be utilized for biomedical research; (3) to provide recent excerpts in nanotoxicology and multifunctional nanoparticle systems (MFNPSs); and (4) to propose areas in neuroscience that may benefit from research at the interface of neurobiologically important systems and nanostructured materials.

Surface modification of nanoporous alumina membranes by plasma polymerization

The deposition of plasma polymer coatings onto porous alumina (PA) membranes was investigated with the aim of adjusting the surface chemistry and the pore size of the membranes. PA membranes from commercial sources with a range of pore diameters (20, 100 and 200 nm) were used and modified by plasma polymerization using n-heptylamine (HA) monomer, which resulted in a chemically reactive polymer surface with amino groups. Heptylamine plasma polymer (HAPP) layers with a thickness less than the pore diameter do not span the pores but reduce their diameter. Accordingly, by adjusting the deposition time and thus the thickness of the plasma polymer coating, it is feasible to produce any desired pore diameter. The structural and chemical properties of modified membranes were studied by scanning electron microscopy (SEM), atomic force microscopy (AFM) and x-ray electron spectroscopy (XPS). The resultant PA membranes with specific surface chemistry and controlled pore size are applicable for molecular separation, cell culture, bioreactors, biosensing, drug delivery, and engineering complex composite membranes.

In situ synthesis of peptide microarrays using ink-jet microdispensing

The study of protein-protein and protein-DNA interactions is critical to understand biological processes. This article presents the methodology to create peptide microarrays in situ for the high-throughput screening of complex biomolecules. The in situ ink-jet peptide synthesis results in a conservation of costly reagent and amino acids, whereas providing a means to produce denser peptide arrays. A smaller amount of test sample is required to observe interaction when using these high-density peptide arrays.

Influence of engineered titania nanotubular surfaces on bone cells

A goal of current orthopedic biomaterials research is to design implants that induce controlled, guided, and rapid healing. In addition to acceleration of normal wound healing phenomena, these implants should result in the formation of a characteristic interfacial layer with adequate biomechanical properties. To achieve these goals, however, a better understanding of events at the bone-material interface is needed, as well as the development of new materials and approaches that promote osseointegration. Using anodization, titania interfaces can be fabricated with controlled nanoarchitecture. This study demonstrates the ability of these surfaces to promote osteoblast differentiation and matrix production, and enhance short- and long-term osseointegration in vitro. Titania nanotubular surfaces were fabricated using an anodization technique. Marrow stromal cells (MSCs) were isolated from male Lewis rats and seeded on these surfaces along with control surfaces. The interaction of cells with these surfaces was investigated in terms of their ability to adhere, proliferate and differentiate on them. The experiments were repeated three times with cells from different cultures. All the results were analyzed using analysis of variance (ANOVA). Statistical significance was considered at p<0.05. Furthermore, in vivo biocompatibility was assessed by implanting surfaces subcutaneously in male Lewis rat and performing histological analysis after 4 weeks. Our results indicate that the nanotubular titania surfaces provide a favorable template for the growth and maintenance of bone cells. The cells cultured on nanotubular surfaces showed higher adhesion, proliferation, ALP activity and bone matrix deposition compared to those grown on flat titanium surfaces. In vivo biocompatibility results suggest that nanotubular titania does not cause chronic inflammation or fibrosis. The fabrication routes of titania nano-architectures are flexible and cost-effective, enabling realization of desired platform topologies on existing non-planar orthopedic implants.

Laminin Immobilized on Titanium Oxide Films for Enhanced Human Umbilical Vein Endothelial Cell Adhesion and Growth

In prior work we have shown that titanium oxide (Ti-O) thin films have good blood compatibility. However, as well as being hemocompatible, biomaterials used in contact with blood should be cell compatible also. In the work described here, Ti-O films were synthesized using unbalanced magnetron sputtering (UBMS) and were modified by immobilizing laminin on the film surface for improving human umbilical vein endothelial cell (HUVEC) adhesion and growth. Scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR) and contact-angle measurements were used to investigate the surface characteristics of the Ti-O films and the modified Ti-O films. The results suggest that Laminin can be biochemically immobilized on the Ti-O film surface. The modified layer of Laminin can improve the hydrophilicity and wettability of Ti-O films. In vitro HUVEC investigations reveal that Laminin immobilized on the film surface greatly enhances cell adhesion and growth on Ti-O films.

Survival, migration and differentiation of retinal progenitor cells transplanted on micro-machined poly(methyl methacrylate) scaffolds to the subretinal space

Stem and progenitor cells can be combined with polymer substrates to generate tissue equivalents in culture. The replacement of retinal tissue lost to disease or trauma using retinal progenitor cells (RPCs) delivered on polymer scaffolds and transplanted into the sub-retinal space of the damaged retina is a promising therapeutic strategy. Micromachining-based, ultra-thin PMMA poly(methyl methacrylate) scaffolds may provide a suitable cytoarchitectural environment for tissue engineering and transplantation to the diseased eye. Here, adhesion of RPCs to polymer, as well as migration and differentiation in the host retina were compared for PMMA scaffolds (6 microm thickness) with either smooth or porous (11 microm diameter) surface topography. RPCs were cultured under identical conditions on smooth or porous laminin-coated polymer scaffolds and transplanted into the subretinal space of C57BL/6 mice. RPCs could be cultured on both scaffolds with similar results, although transplantation with non-porous scaffolds showed limited RPC retention. Porous scaffolds demonstrated enhanced RPC adherence during transplantation and allowed for greater process outgrowth and cell migration into the host retinal layers. Integrated cells expressed the mature neuronal marker neurofilament-200 (nf-200), the glial marker glial fibrillary acidic protein (GFAP) and the retinal-specific marker recoverin. No host foreign body response was seen. In conclusion, ultra-thin film PMMA scaffolds micromachined to contain through pores retain adherent RPCs to a considerably greater extent than unmachined versions during the transplantation process and can serve as a biocompatible substrate for cell delivery in vivo.

Biocompatibility of nanoporous alumina membranes for immunoisolation

Cellular immunoisolation using semi-permeable barriers has been investigated over the past several decades as a promising treatment approach for diseases such as Parkinson's, Alzheimer's, and Type 1 diabetes. Typically, polymeric membranes are used for immunoisolation applications; however, recent advances in technology have led to the development of more robust membranes that are able to more completely meet the requirements for a successful immunoisolation device, including well controlled pore size, chemical and mechanical stability, nonbiodegradability, and biocompatibility with both the graft tissue as well as the host. It has been shown previously that nanoporous alumina biocapsules can act effectively as immunoisolation devices, and support the viability and functionality of encapsulated beta cells. The aim of this investigation was to assess the biocompatibility of the material with host tissue. The cytotoxicity of the capsule, as well as its ability to activate complement and inflammation was studied. Further, the effects of poly(ethylene glycol) (PEG) modification on the tissue response to implanted capsules were studied. Our results have shown that the device is nontoxic and does not induce significant complement activation. Further, in vivo work has demonstrated that implantation of these capsules into the peritoneal cavity of rats induces a transient inflammatory response, and that PEG is useful in minimizing the host response to the material.

Presentation of RGDS epitopes on self-assembled nanofibers of branched peptide amphiphiles

Branched peptide amphiphile (PA) molecules bearing biological epitopes were designed and synthesized using orthogonal protecting group chemistry on amine groups at lysine residues. These molecules self-assemble into high-aspect-ratio cylindrical nanofibers, and their branched architecture enhances accessibility of epitopes for protein binding and also allows the presentation of more than one epitope in a single molecule. The RGDS cell adhesion epitope was used as a model bioactive signal on PA molecules for potential biomedical applications. Aggregation of the branched PA molecules into nanofibers was demonstrated by TEM and through shifts in the protonation profiles of peripheral amines. These systems also formed self-supporting gels in the presence of physiological fluids and other biologically relevant macromolecules such as synovial fluid and DNA, an important property for their potential use in medicine. Fluorescence anisotropy measurements on the PAs with tryptophan residues were performed to examine the effect of branching on packing and mobility of the peptides in the self-assembled nanofibers. The mobility of tryptophan residues was observed to be restricted upon packing of PA molecules into nanofibers. However, relative to linear analogues, branched molecules retain more mobility in the supramolecular aggregates.

Osteogenic differentiation of marrow stromal cells cultured on nanoporous alumina surfaces

A major goal in orthopedic biomaterials research is to design implant surfaces, which will enhance osseointegration in vivo. Several microscale as well as nanoscale architectures have been shown to significantly affect the functionality of bone cells i.e., osteoblasts. In this work, nanoporous alumina surfaces fabricated by a two-step anodization process were used. The nanostructure of these surfaces can be controlled by varying the voltage used for anodization process. Marrow stromal cells were isolated from mice and seeded on nanoporous and amorphous (control) alumina surfaces. Cell adhesion, proliferation, and viability were investigated for up to 7 days of culture. Furthermore, the cell functionality was investigated by calcein staining. The cells were provided with differentiation media after 7 days of culture. The alkaline phosphatase (ALP) activity and matrix production were quantified using a colorimetric assay and X-ray photoelectron spectroscopy (XPS) for up to 3 weeks of culture (2 weeks after providing differentiation media). Further, scanning electron microscopy (SEM) was used to investigate osteoblast morphology on these nanoporous surfaces. Over the 3-week study, the nanoporous alumina surfaces demonstrated approximately 45% increase in cell adhesion, proliferation, and viability, 35% increase in ALP activity, and 50% increase in matrix production when compared with the control surfaces.

Methods for Fabrication of Nanoscale Topography for Tissue Engineering Scaffolds

Observations of how controlling the microenvironment of cell cultures can lead to changes in a variety of parameters has lead investigators to begin studying how the nano-environment of a culture can affects cells. Cells have many structures at the nanoscale such as filipodia and cytoskeletal and membrane proteins that interact with the environment surrounding them. By using techniques that can control the nano-environment presented to a cell, investigators are beginning to be able to mimic the nanoscale topographical features presented to cells by extracellular matrix proteins such as collagen, which has precise and repeating nano-topography. The belief is that these nanoscale surface features are important to creating more natural cell growth and function. A number of techniques are currently being used to create nanoscale topographies for cell scaffolding. These techniques fall into two main categories: techniques that create ordered topographies and those that create unordered topographies. Electron Beam lithography and photo-lithography are two standard techniques for creating ordered features. Polymer demixing, phase separation, colloidal lithography and chemical etching are most typically used for creating unordered surface patterns. This review will give an overview of these techniques and cite observations from experiments carried out using them.

Micromachined devices: the impact of controlled geometry from cell-targeting to bioavailability

Advances in microelectomechanical systems (MEMS) have allowed the microfabrication of polymeric substrates and the development of a novel class of controlled delivery devices. These vehicles have specifically tailored three-dimensional physical and chemical features which, together, provide the capacity to target cells, promote unidirectional controlled release, and enhance permeation across the intestinal epithelial barrier. Examining the biological response at the microdevice biointerface may provide insight into the benefits of customized surface chemistry and structure in terms of complex drug delivery vehicle design. Therefore, the aim of this work was to determine the interfacial effects of selective surface chemistry and architecture of tomato lectin (TL)-modified poly(methyl methacrylate) (PMMA) drug delivery microdevices on the Caco-2 cell line, a model of the gastrointestinal tract.

Influence of nanoporous alumina membranes on long-term osteoblast response

A major goal of bone tissue engineering is to design better scaffold configuration and materials to better control osteoblast behavior. Nanoporous architecture has been shown to significantly affect cellular response. In this work, nanoporous alumina membranes were fabricated by a two-step anodization method to investigate bone cell response. Osteoblasts were seeded on nanoporous alumina membranes to investigate both short-term adhesion and proliferation and long-term functionality and matrix production. Cell adhesion and proliferation were characterized using a standard MTT assay and cell counting. The total protein content was measured after cell lysis using the BCA assay. Matrix production was characterized in terms of surface concentrations of calcium and phosphorous, components of bone matrix, using X-ray photoelectron spectroscopy (XPS). The results from nanoporous alumina membranes were compared with those of amorphous alumina, aluminum, commercially available ANOPORE and glass. Results indicate improved osteoblast adhesion and proliferation and increased matrix production after 4 weeks of study.

Streaming potential in cylindrical pores of poly(ethylene terephthalate) track-etched membranes: variation of apparent zeta potential with pore radius

Streaming potential variation with pressure measured through poly(ethylene terephthalate) track-etched membranes of different pore sizes led to the determination of an apparent interfacial potential zetaa in the presence of 10-2 M KCl. The variation of zetaa with the pore radius r0 is interpreted by (i) the electric double layer overlap effect and (ii) the presence of a conductive gel layer. We propose a method which integrates both effects by assuming a simple model for the conductive gel at the pore wall. We observed the following three domains of pore size: (i) r0 > 70 nm, where surface effects are negligible; (ii) approximately 17 nm < r0 < 70 nm, where the pore/solution interface could be described as a conductive gel of thickness around 1 nm; (iii) r0 < approximately 17 nm, which corresponds to the region strongly damaged by the ion beam and is not analyzed here. The first one (zeta = -36.2 mV) corresponds to the raw material when etching has completely removed the ion beam predamaged region, which corresponds to the second intermediate domain (zeta = -47.3 mV). There the conductance of the gel layer deduced from the treatment of streaming potential data was found to be compatible with the number of ionic sites independently determined by the electron spin resonance technique.