Chitosan-tethered poly(acrylonitrile--maleic acid) hollow fiber membrane for lipase immobilization

Bioconjugation of recombinant tissue plasminogen activator to magnetic nanocarriers for targeted thrombolysis

Low-toxicity magnetic nanocarriers (MNCs) composed of a shell of poly [aniline-co-N-(1-one-butyric acid) aniline] over a Fe(3)O(4) magnetic nanoparticle core were developed to carry recombinant tissue plasminogen activator (rtPA) in MNC-rtPA for targeted thrombolysis. With an average diameter of 14.8 nm, the MNCs exerted superparamagnetic properties. Up to 276 μg of active rtPA was immobilized per mg of MNCs, and the stability of the immobilized rtPA was greatly improved during storage at 4°C and 25°C. In vitro thrombolysis testing with a tubing system demonstrated that magnet-guided MNC-rtPA showed significantly improved thrombolysis compared with free rtPA and reduced the clot lysis time from 39.2 ± 3.2 minutes to 10.8 ± 4.2 minutes. In addition, magnet-guided MNC-rtPA at 20% of the regular rtPA dose restored blood flow within 15-25 minutes of treatment in a rat embolism model without triggering hematological toxicity. In conclusion, this improved system is based on magnetic targeting accelerated thrombolysis and is potentially amenable to therapeutic applications in thromboembolic diseases.

Poly(amidoamine) dendronized hollow fiber membranes: synthesis, characterization, and preliminary applications as drug delivery devices

Poly(amidoamine) (PAMAM) dendrons were prepared from hollow fiber membranes (HFM) consisting of bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) in a stepwise manner. The prepared HFM were characterized by Fourier transform infrared spectroscopy, elemental analysis, and scanning electron microscopy. The drug loading efficiency and release behavior of the PAMAM dendronized HFM were evaluated using sodium salicylate, sodium methotrexate, and Congo red as model drugs. The results suggest that PAMAM dendronized HFM can be effectively loaded with a variety of drugs and prolong the release of these drugs. The drug loading and release characteristics of the HFM depend on the generation of PAMAM dendrons grafted on the membranes. The prepared PAMAM dendronized BPPO HFM are promising scaffolds in drug delivery and tissue engineering.

Immobilization of Candida rugosa lipase on poly(3-hydroxybutyrate-co-hydroxyvalerate): a new eco-friendly support

The overall objective of this study is to evaluate the morphological [scanning electron microscopy (SEM)], physicochemical [differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), chemical composition analysis, Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR)], and biochemical properties of Candida rugosa lipase (CRL) immobilized on a natural biopolymer poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) in aqueous solution. CRL was immobilized by physical adsorption with efficiency of 30%. Compared with free CRL enzyme, there were slight changes in immobilized CRL activity as a function of temperature (from 37°C to 45°C), but a similar optimal pH value of 7.0. Inactivation rate constants for immobilized CRL enzyme were 0.009 and 0.334 h−1, and half-lives were 77 and 2 h at 40°C and 60°C, respectively. Kinetic parameters obtained for immobilized CRL include the Michaelis–Menten constant of K  m = 213.18 mM and maximum reaction velocity of V  max = 318.62 U/g. The operational stability of immobilized CRL was tested repeatedly, and after 12 cycles of reuse, the enzyme retained 50% activity. Based on our results, we propose that PHBV-immobilized CRL could serve as a promising biocatalyst in several industrial applications.

Effect of membranes with various hydrophobic/hydrophilic properties on lipase immobilized activity and stability

In this study, three membranes: regenerated cellulose (RC), glass fiber (GF) and polyvinylidene fluoride (PVDF), were grafted with 1,4-diaminobutane (DA) and activated with glutaraldehyde (GA) for lipase covalent immobilization. The efficiencies of lipases immobilized on these membranes with different hydrophobic/hydrophilic properties were compared. The lipase immobilized on hydrophobic PVDF-DA-GA membrane exhibited more than an 11-fold increase in activity compared to its immobilization on a hydrophilic RC-DA-GA membrane. The relationship between surface hydrophobicity and immobilized efficiencies was investigated using hydrophobic/hydrophilic GF membranes which were prepared by grafting a different ratio of n-butylamine/1,4-diaminobutane (BA/DA). The immobilized lipase activity on the GF membrane increased with the increased BA/DA ratio. This means that lipase activity was exhibited more on the hydrophobic surface. Moreover, the modified PVDF-DA membrane was grafted with GA, epichlorohydrin (EPI) and cyanuric chloride (CC), respectively. The lipase immobilized on the PVDF-DA-EPI membrane displayed the highest specific activity compared to other membranes. This immobilized lipase exhibited more significant stability on pH, thermal, reuse, and storage than did the free enzyme. The results exhibited that the EPI modified PVDF is a promising support for lipase immobilization.

Chitosan-coated polystyrene microplate for covalent immobilization of enzyme

Microplates made of polystyrene have been widely used for immunoassays. Protein molecules that have been immobilized on a hydrophobic polystyrene microplate by passive adsorption lose their activity and suffer considerable denaturation. A new chitosan-coated microplate suitable for the covalent immobilization of enzymes has been developed. The primary amino groups of chitosan were exploited for this covalent coupling of proteins. The optical transmittance of the chitosan-coated microplate, at wavelengths of 400-800 nm, was estimated to be suitable for its application in chromogenic reaction-based bioassays. The immobilization efficiency of the chitosan-coated microplate was demonstrated to be far superior to that of a conventional microplate when tested using acetylcholinesterase (AChE) and β-glucosidase as model biomolecules, and the chitosan-coated microplate may thus have potential applications in biosensing and bioreactor systems.

Protein adsorption on a glycosylated polyacrylonitrile surface: monitoring with QCM and SPR

A simple and efficient method to fabricate a glycosylated surface on a polyacrylonitrile-based film is described. Construction and protein adsorption processes were monitored in situ using a QCM. A PANCHEMA film was deposited on the gold surface of the quartz crystal, and the glycosylated surface was then constructed through surface modification. Con A and BSA were used as probes to study the specificity of this surface to proteins. It can recognize Con A, while showing no specific interaction with BSA. The binding affinity indicates the presence of strong multivalent interactions between Con A and the glucose residues (cluster glycoside effect). Reproducibility and repeatability of the glycosylated polymer surface are sufficient to allow specific adsorption of Con A.

Immobilization of heparin on polysulfone surface for selective adsorption of low-density lipoprotein (LDL)

A versatile method was developed to immobilize heparin covalently on polysulfone sheets (PSu) to achieve selective adsorption of low-density lipoprotein (LDL). This was achieved by activation of PSu with successive treatments of chlorodimethyl ether and ethylenediamine, and subsequent chemical binding of heparin with bifunctional linker molecules. A heparin density up to 0.86 microg cm(-2) on a dense PSu film was achieved. The modified PSu films were characterized by attenuated total reflectance Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The hydrophilicity of the PSu film was improved greatly by covalent immobilization of heparin. The water contact angle of PSu film was decreased from 86.6 + or - 3.7 degrees to 50.5 + or - 3.2 degrees after binding of 0.36 microg cm(-2) heparin. An enzyme-linked immunosorbent assay was used to measure the binding of LDL on plain and modified PSu films. It was found that the heparin-modified PSu film could selectively recognize LDL from binary protein solutions. Furthermore, it was possible to desorb LDL from heparinized PSu, but not from plain PSu, with heparin, sodium chloride or urea solution, which indicates a selective but reversible binding of LDL to heparin. The results suggest that heparin-modified PSu membranes are promising for application in simultaneous hemodialysis and LDL apheresis therapy.

Immobilization of Candida rugosa lipase on sporopollenin from Lycopodium clavatum

Sporopollenin is a natural polymer obtained from Lycopodium clavatum, which is highly stable with constant chemical structure and has high resistant capacity to chemical attack. In this study, immobilization of lipase from Candida rugosa (CRL) on sporopollenin by adsorption method is reported for the first time. Besides this, the enzyme adsorption capacity, activity and thermal stability of immobilized enzyme have also been investigated. It has been observed that under the optimum conditions (Spo-E((0.3))), the specific activity of the immobilized lipase on the sporopollenin by adsorption was 16.3U/mg protein, which is 0.46 times less than that of the free lipase (35.6U/mg protein). The pH and temperature of immobilized enzyme were optimized, which were 6.0 and 40 degrees C respectively. Kinetic parameters V(max) and K(m) were also determined for the immobilized lipase. It was observed that there is an increase of the K(m) value (7.54mM) and a decrease of the V(max) value (145.0U/mg-protein) comparing with that of the free lipase.