Non-viral gene transfection in vitro using endosomal pH-sensitive reversibly hydrophobilized polyethylenimine

pH-sensitive degradable chimaeric polymersomes for the intracellular release of doxorubicin hydrochloride

pH-sensitive degradable chimaeric polymersomes were developed based on asymmetric poly(ethylene glycol)-b-poly(2,4,6-trimethoxybenzylidene-1,1,1-tris(hydroxymethyl)ethane methacrylate)-b-poly(acrylic acid) (PEG-PTTMA-PAA) triblock copolymers for active loading as well as triggered intracellular release of hydrophilic doxorubicin hydrochloride (DOX·HCl). PEG-PTTMA-PAA copolymers were readily prepared with M(n PAA) ranging from 1.5, 2.1 to 2.7 kg/mol by sequential reversible addition-fragmentation chain transfer (RAFT) copolymerization of 2,4,6-trimethoxybenzylidene-1,1,1-tris(hydroxymethyl)ethane methacrylate (TTMA) and acrylic acid (AA) using PEG-CPADN (M(n PEG) = 5.0 kg/mol; CPADN: 4-cyanopentanoic acid dithionaphthalenoate) as a macro-RAFT agent. PEG-PTTMA-PAA copolymers formed mono-disperse polymersomes with average sizes of 63.9-112.1 nm, which decreased with increasing M(n PAA). The polymersomal structure was confirmed by transmission electron microscopy (TEM) and confocal laser scanning microscopy (CLSM). Notably, the acetals in polymersomes while sufficiently stable at pH 7.4 were prone to rapid hydrolysis at mildly acidic pHs of 4.0 and 5.0, which resulted in swelling and eventually disassembly of polymersomes. These chimaeric polymersomes could actively load DOX·HCl resulting in remarkably high drug loading contents (up to 15.9 wt.%) and loading efficiencies (up to 88.8%). The in vitro release studies showed that DOX·HCl was released from chimaeric polymersomes in a controlled and pH-dependent manner. CLSM observations revealed that these chimaeric polymersomes could efficiently deliver and release DOX·HCl into the nuclei of HeLa cells. MTT assays in HeLa cells demonstrated that DOX·HCl-loaded PEG-PTTMA-PAA polymersomes exhibited high anti-tumor activity with IC(50) (inhibitory concentration to produce 50% cell death) of 1.48-1.67 μg/mL, close to that of free DOX·HCl, while blank polymersomes were practically non-toxic up to a tested concentration of 2.0 mg/mL. These pH-sensitive degradable chimaeric polymersomes have appeared to be a promising alternative to liposomes for tumor-targeted delivery of DOX·HCl.

Triggered rapid degradation of nanoparticles for gene delivery

Effective gene delivery tools offer the possibility of addressing multiple diseases; current strategies rely on viruses or polyplexes. Encapsulation of DNA within nanoparticles is an attractive alternative method for gene delivery. We investigated the use of our recently developed Logic Gate Nanoparticle for gene delivery. The nanoparticles, composed of a dual pH response random copolymer (poly-β-aminoester ketal-2), can undergo a two-step “in series” response to endosomal pH. The first sep is a hydrophobic-hydrophilic switch, which is followed immediately by rapid degradation. Rapid fragmentation is known to increase cytoplasmic delivery from nanoparticles. Therefore, we hypothesized that our Logic Gate Nanoparticles would enable increased gene delivery and expression relative to nanoparticles that degrade more slowly such as PLGA-based nanoparticles. Passive nanoparticle entry into cells was demonstrated by delivering Cy5-labeled pDNA encoding EGFP into HCT116, a colon carcinoma cell line. Flow cytometry analysis showed that cells are positive for Cy5-DNA-nanoparticles and produced EGFP expression superior to PLGA nanoparticles. Inhibition of V-ATPases using bafilomycin A1 demonstrates that expression of EGFP is dependent on low endosomal pH. The advanced Logic Gate Nanoparticles offer new therapeutic possibilities in gene delivery and other applications where rapid release is important.

Disulfide-containing brushed polyethylenimine derivative synthesized by click chemistry for nonviral gene delivery

Polyaspartamide-based disulfide-containing brushed polyethylenimine derivatives P(Asp-Az)X-SS-PEIs were synthesized via click chemistry and evaluated as nonviral gene delivery carrier. First, azide-functional poly(aspartic acid) derivatives with various azide-group densities and monoalkyne-terminated PEI with disulfide linkages were synthesized. Then, click reaction between the azide-functional poly(aspartic acid) derivative as main chain and the monoalkyne-terminated PEI as branched chain resulted in high-molecular-weight disulfide-containing brushed PEI derivative. The structure of obtained polymers was confirmed by (1)H NMR and FTIR. It was shown that the disulfide-containing P(Asp-Az)X-SS-PEIs were able to bind plasmid DNA and condense DNA into small positive nanoparticles. The reduction-sensitivity of the P(Asp-Az)X-SS-PEI/DNA polyplexes was confirmed by gel retardation assay and dynamic light scattering (DLS) in the presence of DTT. In vitro experiments revealed that the reducible P(Asp-Az)X-SS-PEI not only had much lower cytotoxicity, but also posed high transfection activity (both in the presence and absence of serum) as compared to the control nondegradable 25 kDa PEI. This study indicates that a reducibly degradable brushed polymer P(Asp-Az)X-SS-PEI composed of low-molecular-weight (LMW) PEI via a disulfide-containing linkage can be a promising gene delivery carrier.

Poly(ethylene oxide) grafted with short polyethylenimine gives DNA polyplexes with superior colloidal stability, low cytotoxicity, and potent in vitro gene transfection under serum conditions

Poly(ethylene oxide) grafted with 1.8 kDa branched polyethylenimine (PEO-g-PEI) copolymers with varying compositions, that is, PEO(13k)-g-10PEI, PEO(24k)-g-10PEI, and PEO(13k)-g-22PEI, were prepared and investigated for in vitro nonviral gene transfer. Gel electrophoresis assays showed that PEO(13k)-g-10PEI, PEO(24k)-g-10PEI, and PEO(13k)-g-22PEI could completely inhibit DNA migration at an N/P ratio of 4/1, 4/1, and 3/1, respectively. Dynamic light scattering (DLS) and zeta potential measurements revealed that all three graft copolymers were able to effectively condense DNA into small-sized (80-245 nm) particles with moderate positive surface charges (+7.2 ∼ +24.1 mV) at N/P ratios ranging from 5/1 to 40/1. The polyplex sizes and zeta-potentials intimately depended on PEO molecular weights and PEI graft densities. Notably, unlike 25 kDa PEI control, PEO-g-PEI polyplexes were stable against aggregation under physiological salt as well as 20% serum conditions due to the shielding effect of PEO. MTT assays in 293T cells demonstrated that PEO-g-PEI polyplexes had decreased cytotoxicity with increasing PEO molecular weights and decreasing PEI graft densities, wherein low cytotoxicities (cell viability >80%) were observed for polyplexes of PEO(13k)-g-22PEI, PEO(13k)-g-10PEI, and PEO(24k)-g-10PEI up to an N/P ratio of 20/1, 30/1, and 40/1, respectively. Interestingly, in vitro transfection results showed that PEO(13k)-g-10PEI polyplexes have the best transfection activity. For example, PEO(13k)-g-10PEI polyplexes formed at an N/P ratio of 20/1, which were essentially nontoxic (100% cell viability), displayed over 3- and 4-fold higher transfection efficiencies in 293T cells than 25 kDa PEI standard under serum-free and 10% serum conditions, respectively. Confocal laser scanning microscopy (CLSM) studies using Cy5-labeled DNA confirmed that these PEO-g-PEI copolymers could efficiently deliver DNA into the perinuclei region as well as into nuclei of 293T cells at an N/P ratio of 20/1 following 4 h transfection under 10% serum conditions. PEO-g-PEI polyplexes with superior colloidal stability, low cytotoxicity, and efficient transfection under serum conditions are highly promising for safe and efficient in vitro as well as in vivo gene transfection applications.

Hybrid polyethylenimine and polyacrylic acid-bound iron oxide as a magnetoplex for gene delivery

Low transfection efficiency is always an issue when cationic polymers are used as a nonviral gene vector in the physiological condition, especially in the presence of proteins. A cationic magnetic nanoparticle (MNP) may be an alternative to solve this problem because a magnetic field can help to attract the MNP and internalize it into cells. The aim of this study was to determine the potency of polyethylenimine (PEI)-decorated MNPs for efficiently complexing and delivering plasmid DNA in vitro with the help of a magnetic field. PEI is associated with poly(acrylic acid)-bound superparamagnetic iron oxide (PAAIO) through electrostatic interactions (PEI-PAAIO). PEI-PAAIO formed stable polyplexes with pDNA in the presence and absence of 10% fetal bovine serum (FBS) and could be used for magnetofection. The effect of a static magnetic field on the cytotoxicity, cellular uptake, and transfection efficiency of PEI-PAAIO/pDNA was evaluated with and without 10% FBS. Magnetofection efficacy in HEK 293T cells and U87 cells containing 10% FBS was significantly improved in the presence of an external magnetic field. The amount of internalized iron was quantitatively measured using an inductively coupled plasma-optical emission spectrometer and directly visualized using Prussian blue staining. The internalized pDNA was visualized using a confocal laser scanning microscope.