Probing structure-antifouling activity relationships of polyacrylamides and polyacrylates

Superior Antifouling Performance of a Zwitterionic Peptide Compared to an Amphiphilic, Non-Ionic Peptide

The aim of this study was to explore the influence of amphiphilic and zwitterionic structures on the resistance of protein adsorption to peptide self-assembled monolayers (SAMs) and gain insight into the associated antifouling mechanism. Two kinds of cysteine-terminated heptapeptides were studied. One peptide had alternating hydrophobic and hydrophilic residues with an amphiphilic sequence of CYSYSYS. The other peptide (CRERERE) was zwitterionic. Both peptides were covalently attached onto gold substrates via gold-thiol bond formation. Surface plasmon resonance analysis results showed that both peptide SAMs had ultralow or low protein adsorption amounts of 1.97-11.78 ng/cm2 in the presence of single proteins. The zwitterionic peptide showed relatively higher antifouling ability with single proteins and natural complex protein media. We performed molecular dynamics simulations to understand their respective antifouling behaviors. The results indicated that strong surface hydration of peptide SAMs contributes to fouling resistance by impeding interactions with proteins. Compared to the CYSYSYS peptide, more water molecules were predicted to form hydrogen-bonding interactions with the zwitterionic CRERERE peptide, which is in agreement with the antifouling test results. These findings reveal a clear relation between peptide structures and resistance to protein adsorption, facilitating the development of novel peptide-containing antifouling materials.

Targeted grafting of thermoresponsive polymers from a penetrative honeycomb structure for cell sheet engineering

Responsive membranes have been used to construct smart biomaterial interfaces. We report a novel approach to fabricate honeycomb films with a pattern of thermoresponsive polymer, namely poly(N-isopropylacrylamide). The approach was based on a combination of the breath figure method and reversible addition-fragmentation chain transfer. The hybrid film had morphological and chemical patterns resulting in varied wettability and morphology at various stages, as well as high thermo-responsiveness. Enhanced cell adhesion was observed at an incubation temperature of 37 °C, which is above its lower critical solution temperature (LCST). Furthermore, cells could be harvested at temperatures below the LCST without trypsin treatment. The non-invasive characteristics give this membrane potential as a substrate for cell sheet engineering.

A survey of state-of-the-art surface chemistries to minimize fouling from human and animal biofluids

Fouling of artificial surfaces by biofluids is a plague Biotechnology deeply suffers from. Herein, we inventory the state-of-the-art surface chemistries developed to minimize this effect from both human and animal biosamples.

Mechanically strong hybrid double network hydrogels with antifouling properties

The development of mechanically tough and biocompatible polymer hydrogels has great potential and promise for many applications.

Antibiofouling polymer interfaces: poly(ethylene glycol) and other promising candidates

This review highlights antibiofouling polymer interfaces with emphasis on the latest developments using poly(ethylene glycol) and the design new polymeric structures.

Antifouling gold surfaces grafted with aspartic acid and glutamic acid based zwitterionic polymer brushes

We report two new amino acid based antifouling zwitterionic polymers, poly(N(4)-(2-methacrylamidoethyl)asparagine) (pAspAA) and poly(N(5)-(2-methacrylamidoethyl)glutamine) (pGluAA). The vinyl monomers were developed from aspartic acid and glutamic acid. Surface-initiated photoiniferter-mediated polymerization was employed to graft polymer brushes from gold surfaces. Different thickness of polymer brushes was controlled by varying UV irradiation time. The nonspecific adsorption from undiluted human blood serum and plasma was studied by surface plasmon resonance (SPR). With the polymer film as thin as 11-12 nm, the adsorption on pAspAA from serum and plasma was as low as 0.75 and 5.18 ng/cm(2), respectively, and 1.88 and 10.15 ng/cm(2), respectively, for pGluAA. The adsorption amount is comparable to or even better than other amino acid based zwitterionic polymers such as poly(serine methacrylate), poly(lysine methacrylamide), and poly(ornithine methacrylamide) and other widely used antifouling polymers such as poly(sulfobetaine methacrylate), even under thinner polymer film thickness. The pAspAA and pGluAA grafted surfaces also showed strong resistance to endothelial cell attachment. The possession of both zwitterionic structure and hydrophilic amide groups, biomimetic property, and multifunctionality make pAspAA and pGluAA promising candidates for biocompatible antifouling functionalizable materials.

Synthesis and characterization of antifouling poly(N-acryloylaminoethoxyethanol) with ultralow protein adsorption and cell attachment

Rational design of effective antifouling polymers is challenging but important for many fundamental and applied applications. Herein we synthesize and characterize an N-acryloylaminoethoxyethanol (AAEE) monomer, which integrates three hydrophilic groups of hydroxyl, amide, and ethylene glycol in the same material. AAEE monomers were further grafted and polymerized on gold substrates to form polyAAEE brushes with well-controlled thickness via surface-initiated atomic transfer radical polymerization (SI-ATRP), with particular attention to a better understanding of the molecular structure-antifouling property relationship of hydroxyl-acrylic-based polymers. The surface hydrophilicity and antifouling properties of polyAAEE brushes as a function of film thickness are studied by combined experimental and computational methods including surface plasmon resonance (SPR) sensors, atomic force microscopy (AFM), cell adhesion assay, and molecular dynamics (MD) simulations. With the optimal polymer film thicknesses (∼10-40 nm), polyAAEE-grafted surfaces can effectively resist protein adsorption from single-protein solutions and undiluted human blood plasma and serum to a nonfouling level (i.e., <0.3 ng/cm(2)). The polyAAEE brushes also highly resist mammalian cell attachment up to 3 days. MD simulations confirm that the integration of three hydrophilic groups induce a stronger and closer hydration layer around polyAAEE, revealing a positive relationship between surface hydration and antifouling properties. The molecular structure-antifouling properties relationship of a series of hydroxyl-acrylic-based polymers is also discussed. This work hopefully provides a promising structural motif for the design of new effective antifouling materials beyond traditional ethylene glycol-based antifouling materials.

Binding characteristics between polyethylene glycol (PEG) and proteins in aqueous solution

Polymer-protein interactions are crucial for determining the activity of both polymer and protein for many bio-related applications. Poly(ethylene glycol) (PEG) as a well-known antifouling material is often coated on surfaces to form highly solvated brushes, which exhibit excellent protein-repellent properties. However, unlike surface-induced antifouling effects, little is known about the intrinsic PEG-protein interactions in aqueous solution, which is an important yet neglected problem. Here, we investigate the interactions between PEG and proteins in aqueous solution using fluorescence spectroscopy, atomic force microscopy (AFM), and nuclear magnetic resonance (NMR). Two important characteristics, molecular weight of PEG and mass ratio of PEG : protein, are examined to determine the effect of each on PEG-protein interactions as well as binding characteristics between PEG and proteins. In contrast to too long and too short PEG chains, collective results have shown that PEG with optimal molecular weight (MW) is more capable of interacting with proteins, which induces the conformational change of proteins through more stable binding sites and stronger interactions with long chain PEG. Enhanced PEG-protein interactions are likely due to the change of hydrophilicity to amphiphilicity of PEG with increasing MW_PEG. In contrast to almost none or weak interactions of PEG surfaces with proteins, this work provides new evidence to demonstrate the existence of interactions between PEG and proteins in aqueous solution, which is important not only for better understanding of the structure-activity relationship of PEG both in solution and on surfaces, but also for the rational design of new PEG-based materials for specific applications.

Effects of environmental and clinical interferents on the host capture efficiency of immobilized bacteriophages

Bacteriophage-functionalized surfaces are a new class of advanced functional material and have been demonstrated to be applicable for use as antimicrobial surfaces in medical applications (e.g., indwelling medical devices or wound dressings) or as biosensors for bacterial capture and detection. However, the complex composition of many real life samples (e.g., blood, natural waters, etc.) can potentially interfere with the interaction of phage and its bacterial host, leading to a decline in the efficiency of the phage-functionalized surface. In this study, the bacterial capture efficiency of two model phage-functionalized surfaces was assessed in the presence of potential environmental and biomedical interferents. The two phage-bacteria systems used in this study are PRD1 with Salmonella Typhimurium and T4 with Escherichia coli. The potential interferents tested included humic and fulvic acids, natural groundwater, colloidal latex microspheres, host extracellular polymeric substances (EPS), albumin, fibrinogen, and human serum. EPS and human serum decreased the host capture efficiency for immobilized PRD1 and T4, and also impaired the infectivity of the nonimmobilized (planktonic) phage. Interestingly, humic and fulvic acids reduced the capture efficiency of T4-functionalized surfaces, even though they did not lead to inactivation of the suspended virions. Neither humic nor fulvic acids affected the capture efficiency of PRD1. These findings demonstrate the inadequacy of traditional phage selection methods (i.e., infectivity of suspended phage toward its host in clean buffer) for designing advanced functional materials and further highlight the importance of taking into account the environmental conditions in which the immobilized phage is expected to function.

Chemical force microscopy of stimuli-responsive adhesive copolymers

Atomic force microscopy with chemically sensitive tips was used to investigate the hydrophobic and electrostatic interaction forces of a stimuli-responsive adhesive polymer, and their dynamic changes in response to water immersion and salt concentration. Block copolymer-filled coatings were obtained by incorporating an amphiphilic block copolymer containing a polydimethylsiloxane (PDMS) block and a poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) block in a PDMS matrix. Topographic images of fresh samples revealed the presence of nanoscale domains associated with the presence of copolymers, covered by a thin layer of PDMS. Prolonged (30 days) immersion in aqueous solution led to the exposure of the hydrophilic PDMAEMA chains on the surface. Using adhesion force mapping with hydrophobic tips, we showed that fresh samples were uniformly hydrophobic, while aged samples exhibited lower surface hydrophobicity and featured nanoscale hydrophilic copolymer domains. Force mapping with negatively charged tips revealed remarkable salt-dependent force plateau signatures reflecting desorption of polyelectrolyte copolymer chains. These nanoscale experiments show how solvent-induced conformational changes of stimuli-responsive copolymers can be used to modulate surface adhesion.

Tunable and selective detection of cancer cells using a betainized zwitterionic polymer with BODIPY and graphene oxide

Novel fluorescence probes, reduced graphene oxide (rGO) containing zwitterionic fluorescent nanoparticles, for effective diagnosis of cancer cells.