Guided tissue engineering for healing of cancellous and cortical bone using a combination of biomaterial based scaffolding and local bone active molecule delivery

An insight into cell-laden 3D-printed constructs for bone tissue engineering

In this review, we have spotlighted various combinations of bioinks to optimize the biofabrication of 3D bone constructs.

Biomodulation of an implant for enhanced bone-implant anchorage

Aseptic loosening of implants is the major cause for revision surgery. By modulating the bone-implant interface, early bone-implant anchorage could be improved. Implant surface manipulation by the addition of osteopromotive molecules locally and systemically to promote implant integration has been described with limited success. This study describes a novel approach by making the implant capable of biologically modulating its surroundings. It was hypothesized that the early implant fixation would improve by filling the interior of the implant with a carrier providing spatio-temporal release of bone active drugs with known osteogenic effect. The implant consisted of a threaded polyether ether ketone (PEEK) hollow chamber with holes at the bottom. The implant was filled with a calcium sulphate (CaS)/hydroxyapatite (HA) carrier, delivering two bone active molecules; zoledronic acid (ZA) and bone morphogenic protein-2 (BMP-2). At first, a rat abdominal muscle pouch model indicated a sustained in-vivo release of both ¹²⁵I-rhBMP-2 (57%) and ¹⁴C-ZA (22%) from the CaS/HA carrier over a period of 4-weeks. The biomodulated implant was then inserted in the proximal tibia in rats with the following experimental groups: G1) Empty implant, G2) Implant + CaS/HA, G3) Implant + CaS/HA + ZA and G4) Implant + CaS/HA + ZA + rhBMP-2. Significantly higher bone volume (BV) was seen around the implant in groups G3 (3.3 ± 0.7 mm³) and G4 (3.1 ± 0.7 mm³) compared to the control (1.3 ± 0.4 mm³) using micro-computed tomography and qualitative histology. Group G3, also exhibited significantly higher pull-out force and absorbed energy when compared to the control group G1. These findings indicate that a low dose of ZA alone, released in a controlled manner from within a fenestrated implant is enough to improve implant anchorage without the need of adding rhBMP-2. This simple method of using a fenestrated implant containing a ceramic carrier releasing bone active molecules improved bone anchorage and could clinically reduce prosthetic failure. STATEMENT OF SIGNIFICANCE: Aseptic loosening remains as a major cause for implant revisions and early reaction of surrounding bone to the prosthesis is important for longevity. A novel approach to enhance early bone-implant anchorage is presented. The implant is filled with a carrier providing controlled release of bone active molecules. In an animal model, a calcium sulphate (CaS)/hydroxyapatite (HA) carrier was used to provide a spatio-temporal release of bone morphogenic protein-2 (BMP-2) and zoledronic acid (ZA). Significantly better bone-implant integration was achieved using ZA alone, thereby eliminating the need for adding BMP-2. The developed method of implant biomodulation holds potential to prevent implant loosening and is an alternative to prosthetic coatings or systemic drug treatment. Importantly, all constituents are approved for clinical use.

Layer-by-layer electrospun membranes of polyurethane/silk fibroin based on mimicking of oral soft tissue for guided bone regeneration

Guided bone regeneration is an effective method that can enhance bone volume at a defect site of the mandible before material implantation. Layer-by-layer electrospun membranes of polyurethane/silk fibroin (SF) were fabricated to mimic oral soft tissue. The electrospun polyurethane fibers were initially fabricated into a membrane. Next, the polyurethane layer was covered with electrospun SF fibers at different thicknesses. Then, the SF layer was covered with electrospun polyurethane fibers. Afterward, the morphologies of the membranes were observed and analyzed by scanning electron microscopy. The physical properties of the membranes were evaluated from the contact angle and mechanical properties. The biological performances were evaluated by observing cell adhesion, viability and proliferation, alkaline phosphatase activity, and calcium content. The results demonstrated that the membrane with a thin SF core showed better physical properties and mechanical performance than the thicker SF cores. Finally, the results deduced that the membrane with a thin SF core was promising for guided bone regeneration.

Gadolinium-doped mesoporous calcium silicate/chitosan scaffolds enhanced bone regeneration ability

Chitosan (CTS) and mesoporous calcium silicate (MCS) have been developed for bone defect healing; however, their bone regeneration capacity still does not satisfy the patients with bone diseases. Gadolinium (Gd) is accumulated in human bones, and plays a beneficial role in regulating cell performance and bone regeneration. We firstly constructed Gd-doped MCS/CTS (Gd-MCS/CTS) scaffolds by a lyophilization technology. The interconnected arrangement of CTS films lead to forming macropores by using ice crystals as templates during the lyophilization procedure, and the Gd-MCS nanoparticles dispersed uniformly on the macropore walls. The biocompatible chemical components and hierarchical pores facilitated the attachment and spreading of rat bone marrow-derived mesenchymal stem cells (rBMSCs). Interestingly, the Gd dopants in the scaffolds effectively activated the Wnt/β-catenin signaling pathway, resulting in excellent cell proliferation and osteogenic differentiation capacities. The osteogenic-related genes such as alkaline phosphatase (ALP), runt-related transcription factor 2 (Runx2) and collagen type1 (COL-1) were remarkably up-regulated by Gd-MCS scaffolds as compared with MCS scaffolds, and their expression levels increased in a positive correlation with Gd doping amounts. Moreover, in vivo rat cranial defect tests further confirmed that Gd-MCS/CTS scaffolds significantly stimulated collagen deposition and new bone formation. The exciting finding suggested the beneficial effects of Gd³⁺ ions on osteogenic differentiation and new bone regeneration, and Gd-MCS/CTS scaffolds can be employed as a novel platform for bone defect healing.

Bioinspired surface modification of orthopedic implants for bone tissue engineering

Biomedical implants have been widely used in various orthopedic treatments, including total hip arthroplasty, joint arthrodesis, fracture fixation, non-union, dental repair, etc. The modern research and development of orthopedic implants have gradually shifted from traditional mechanical support to a bioactive graft in order to endow them with better osteoinduction and osteoconduction. Inspired by structural and mechanical properties of natural bone, this review provides a panorama of current biological surface modifications for facilitating the interaction between medical implants and bone tissue and gives a future outlook for fabricating the next-generation multifunctional and smart implants by systematically biomimicking the physiological processes involved in formation and functioning of bones.

Self-mineralizing Ca-enriched methacrylated gellan gum beads for bone tissue engineering

In this study, methacrylated gellan-gum (GG-MA) heteropolysaccharide is proposed as a hydrogel for drug delivery and bone tissue engineering applications. Calcium-enriched beads obtained from the crosslinking of 1% (w/v) GG-MA solutions with 0.1 MCaCl₂ were investigated, considering their intrinsic capacity to promote self-mineralization by ion binding and deposition. Indeed, when immersed in a physiological environment, the Ca-enriched beads promoted the development of a bone-like apatite layer, as confirmed by EDS and XRD chemical analysis. Additionally, the mild production process is compatible with drugs incorporation and release. After encapsulation, Dextran with different molecular weights as well as Dexamethasone 21-phosphate were efficiently released to the surrounding environment. The engineered system was also evaluated considering its biocompatibility, by means of qualitative determination of total complement activation, macrophage proliferation, cytokine release and in vitro cell culture. These experiments showed that the developed hydrogels may not stimulate a disproportionate pro-inflammatory reaction once transplanted. At last, when implanted subcutaneously in CD1 male mice up to 8 weeks, the beads were completely calcified, and no inflammatory reaction was observed. Summing up, these results show that calcium-enriched GG-MA hydrogel beads hold great potential as news tools for bone tissue regeneration and local drug delivery applications. STATEMENT OF SIGNIFICANCE: This work describes a low-cost and straightforward strategy to prepare bioactive methacrylated gellan gum (GG-MA) hydrogels, which can be used as drug delivery systems. GG-MA is a highly anionic polymer, that can be crosslinked with divalent ions, as calcium. Taking advantage of this feature, it was possible to prepare Ca-enriched GG-MA hydrogel beads. These beads display a bioactive behavior, since they promote apatite deposition when placed in physiological conditions. Studies on the immune response suggest that the developed beads do not trigger severe immune responses. Importantly, the mild processing method render these beads compliant with drug delivery strategies, paving the way for the application of dual-functional materials on bone tissue engineering.