Topical sustained drug delivery to the retina with a drug-eluting contact lens

Central-to-peripheral corneal edema during wear of embedded-component contact lenses

PURPOSE

With active investigation underway for embedded-circuit contact lenses, safe oxygen supply of these novel lenses remains a question. Central-to-peripheral corneal edema for healthy eyes during wear of soft contact (SCL) and scleral lenses (SL) with embedding components is assessed.

METHODS

Various 2-dimensional (2D) designs of SL and SCL with embedded components are constructed on Comsol Multiphysics 5.5. Local corneal swelling associated with the designed lenses is determined by a recently developed 2D metabolic-swelling model. Settled central post-lens tear-film thicknesses (PoLTFs) are set at 400 μm and 3 μm for SL and SCL designs, respectively. Each lens design has an axisymmetric central and an axisymmetric peripheral embedment. Oxygen permeability (Dk) of the lens and the embedments ranges from 0 to 200 Barrer. Dimensions and location of the embedments are varied to assess optimal-design configurations to minimize central-to-peripheral corneal edema.

RESULTS

By adjusting oxygen Dk of the central embedment, the peripheral embedment, or the lens matrix polymer, corneal swelling is reduced by up to 2.5 %, 1.5 %, or 1.4 % of the baseline corneal thickness, respectively, while keeping all other parameters constant. A decrease in PoLTF thickness from 400 μm to 3 μm decreases corneal edema by up to 1.8 % of the baseline corneal thickness. Shifting the peripheral embedment farther out towards the periphery and towards the anterior lens surface reduces peak edema by up to 1.3 % and 0.6 % of the baseline corneal thickness, respectively.

CONCLUSIONS

To minimize central-to-peripheral corneal edema, embedments should be placed anteriorly and far into the periphery to allow maximal limbal metabolic support and oxygen transport in the polar direction (i.e., the θ-direction in spherical coordinates). High-oxygen transmissibility for all components and thinner PoLTF thickness are recommended to minimize corneal edema. Depending on design specifications, less than 1 % swelling over the entire cornea is achievable even with oxygen-impermeable embedments.

Contact Lenses as Ophthalmic Drug Delivery Systems: A Review

Ophthalmic drugs used for the treatment of various ocular diseases are commonly administered by eye drops. However, due to anatomical and physiological factors, there is a low bioavailability of the active principle. In order to increase the drug residence time on the cornea to adequate levels, therapeutic contact lenses have recently been proposed. The polymeric support that constitutes the contact lens is loaded with the drug; in this way, there is a direct and effective pharmacological action on the target organ, promoting a prolonged release of the active principle. The incorporation of ophthalmic drugs into contact lenses can be performed by different techniques; nowadays, the soaking method is mainly employed. To improve the therapeutic performance of drug-loaded contact lenses, innovative methods have recently been proposed, including the impregnation with supercritical carbon dioxide. This updated review of therapeutic contact lenses production and application provides useful information on the most effective preparation methodologies, recent achievements and future perspectives.

Controllable release of pirfenidone by polyvinyl alcohol film embedded soft contact lenses in vitro and in vivo

To increase the amount of pirfenidone (PFD) loaded in polyvinyl alcohol (PVA) film embedded soft contact lens (SCL), and evaluate its function of sustaining delivery of drug in vitro and in vivo. Drug loading efficiency within PVA film and SCLs, drug release from SCLs in vitro, and the effects of parameters of SCLs and external environment on drug release in vitro were evaluated by ultraviolet–visible spectrophotometer at 312 nm. Safety of SCLs was evaluated in vitro by transformed human corneal epithelial cell. Safety in vivo was determined by optical coherence tomography and histology of anterior segment of rabbits. Drug release study in tear fluid and aqueous humor were measured by ultra-performance liquid chromatography. SCLs had smooth surface and were fit for experimental rabbits. Amount of PFD in PVA film and SCLs were 153.515 μg ± 12.508 and 127.438 μg ± 19.674, respectively, PFD in PVA film was significantly higher than SCLs (p=.006) and closed to 150 μg (targeting amount of PFD to be loaded). Thickness of SCLs, molecular weight of PVA, and amount of PVA used in SCLs affected drug release in vitro significantly. Thickness of PVA film and amount of drug in SCLs had no effect on drug release rate in vitro. SCLs were safe in vitro and in vivo, PFD released from SCLs could be detected around 12 hours in tears and aqueous humor, and the concentration of drug was higher than eye drop at all detected time points while amount of PFD in SCLs was lower than eye drop. Drug loaded PVA film embedded SCLs may be a promising ocular drug delivery system.

CLEAR - Contact lens technologies of the future

Contact lenses in the future will likely have functions other than correction of refractive error. Lenses designed to control the development of myopia are already commercially available. Contact lenses as drug delivery devices and powered through advancements in nanotechnology will open up further opportunities for unique uses of contact lenses. This review examines the use, or potential use, of contact lenses aside from their role to correct refractive error. Contact lenses can be used to detect systemic and ocular surface diseases, treat and manage various ocular conditions and as devices that can correct presbyopia, control the development of myopia or be used for augmented vision. There is also discussion of new developments in contact lens packaging and storage cases. The use of contact lenses as devices to detect systemic disease has mostly focussed on detecting changes to glucose levels in tears for monitoring diabetic control. Glucose can be detected using changes in colour, fluorescence or generation of electric signals by embedded sensors such as boronic acid, concanavalin A or glucose oxidase. Contact lenses that have gained regulatory approval can measure changes in intraocular pressure to monitor glaucoma by measuring small changes in corneal shape. Challenges include integrating sensors into contact lenses and detecting the signals generated. Various techniques are used to optimise uptake and release of the drugs to the ocular surface to treat diseases such as dry eye, glaucoma, infection and allergy. Contact lenses that either mechanically or electronically change their shape are being investigated for the management of presbyopia. Contact lenses that slow the development of myopia are based upon incorporating concentric rings of plus power, peripheral optical zone(s) with add power or non-monotonic variations in power. Various forms of these lenses have shown a reduction in myopia in clinical trials and are available in various markets.

Reversible antibiotic loading and pH-responsive release from polymer brushes on contact lenses for therapy and prevention of corneal infections

Corneal infection is an important cause of corneal damage and vision loss. In this work, polyhydroxy antibiotics were grafted onto polymer brush-modified contact lenses through dynamic chemical bonds between polyphenolic hydroxyls and phenylboronic acid. Both in vitro and in vivo antibacterial tests demonstrated great promise in the prevention of bacterial keratitis, which could be attributed to the enhanced retention time and drug bioavailability.

Topical drug delivery to the posterior segment of the eye: Thermodynamic considerations

Almost all studies on non-invasive topical drug delivery to the eye have emphasized the importance of biological barriers, static membrane barriers such as the cornea and the conjunctiva/sclera and dynamic barriers such as the lacrimal drainage. Hardly any have discussed the importance of the thermodynamic activity of the permeating drug molecules. Most drugs permeate from the eye surface into the eye by passive diffusion where, according to Fick's first law, the drug concentration gradient over the various permeation barriers (e.g., the tear fluid and the lipophilic membrane barriers) is the driving force. At the barrier interphases the dissolved drug molecules must partition from one barrier to another. For example, at the tear-cornea interphase the drug molecules must partition from the aqueous exterior into the lipophilic membrane. The drug partition coefficient between two phases is commonly defined as the equilibrium concentration ratio. However, these are only approximations. The actual driving force in Fick's first law is the gradient of the chemical potential and the equilibrium between two phases is attained when the chemical potential of the drug in one phase is equal to that in the other phase. Here the importance of thermodynamic considerations in topical drug delivery to the eye is reviewed.

Fouling in ocular devices: implications for drug delivery, bioactive surface immobilization, and biomaterial design

The last 30 years has seen a proliferation of research on protein-resistant biomaterials targeted at designing bio-inert surfaces, which are prerequisite for optimal performance of implantable devices that contact biological fluids and tissues. These efforts have only been able to yield minimal results, and hence, the ideal anti-fouling biomaterial has remained elusive. Some studies have yielded biomaterials with a reduced fouling index among which high molecular weight polyethylene glycols have remained dominant. Interestingly, the field of implantable ocular devices has not experienced an outflow of research in this area, possibly due to the assumption that biomaterials tested in other body fluids can be translated for application in the ocular space. Unfortunately, progression in the molecular understanding of many ocular conditions has brought to the fore the need for treatment options that necessitates the use of anti-fouling biomaterials. From the earliest implanted horsehair and silk seton for glaucoma drainage to the recent mini telescopes for sight recovery, this review provides a concise incursion into the gradual evolution of biomaterials for the design of implantable ocular devices as well as approaches used to overcome the challenges with fouling. The implication of fouling for drug delivery, the design of immune-responsive biomaterials, as well as advanced surface immobilization approaches to support the overall performance of implantable ocular devices are also reviewed.

Therapeutic Ophthalmic Lenses: A Review

An increasing incidence of eye diseases has been registered in the last decades in developed countries due to the ageing of population, changes in lifestyle, environmental factors, and the presence of concomitant medical conditions. The increase of public awareness on ocular conditions leads to an early diagnosis and treatment, as well as an increased demand for more effective and minimally invasive solutions for the treatment of both the anterior and posterior segments of the eye. Despite being the most common route of ophthalmic drug administration, eye drops are associated with compliance issues, drug wastage by lacrimation, and low bioavailability due to the ocular barriers. In order to overcome these problems, the design of drug-eluting ophthalmic lenses constitutes a non-invasive and patient-friendly approach for the sustained drug delivery to the eye. Several examples of therapeutic contact lenses and intraocular lenses have been developed, by means of different strategies of drug loading, leading to promising results. This review aims to report the recent advances in the development of therapeutic ophthalmic lenses for the treatment and/or prophylaxis of eye pathologies (i.e., glaucoma, cataract, corneal diseases, or posterior segment diseases) and it gives an overview of the future perspectives and challenges in the field.

Hyaluronic acid and graphene oxide loaded silicon contact lens for corneal epithelial healing

Hyaluronic acid (HA) eye drop solution is widely used to treat and manage various corneal diseases like keratoconus (after corneal cross-linking) and dry eye syndrome. However, ocular dosage forms like eye drop solution affect the routine life style of patients due to frequent dosing schedule. In this study, HA and reduced graphene oxide (rGO) was directly loaded in the silicon contact lenses (HA-GO-DL) and compared with the conventional soaking method (HA-GO-SM). The contact lenses at lower level of rGO showed permissible swelling and transmittance properties. The water retention property of HA-GO-DL contact lenses was confirmed by water evaporation studies. The flux data of HA-GO-SM contact lenses showed high burst release with 24 h release duration. While, HA-GO-DL lenses confirmed low burst with sustained release up to 96 h. In ocular irritation study, the HA-GO-DL-2 lenses was found to be safe. The HA-GO-DL-2 batch showed high HA-tear fluid concentration (rabbit model) and improvement in the rabbit tear fluid volume (Schirmer strip studies) in comparison to the soaking method (HA-GO-SM-2) and eye drop solution. The study successfully demonstrate the potential of HA-GO loaded contact lenses to improve tear fluid volume to manage various ocular diseases like dry eye syndrome.

Steroid-eluting contact lenses for corneal and intraocular inflammation

Ocular inflammation is one of the leading causes of blindness worldwide, and steroids in topical ophthalmic solutions (e.g. dexamethasone eye drops) are the mainstay of therapy for ocular inflammation. For many non-infectious ocular inflammatory diseases, such as uveitis, eye drops are administered as often as once every hour. The high frequency of administration coupled with the side effects of eye drops leads to poor adherence for patients. Drug-eluting contact lenses have long been sought as a potentially superior alternative for sustained ocular drug delivery; but loading sufficient drug into contact lenses and control the release of the drug is still a challenge. A dexamethasone releasing contact lens (Dex-Lens) was previously developed by encapsulating a dexamethasone-polymer film within the periphery of a hydrogel-based contact lens. Here, we demonstrate safety and efficacy of the Dex-Lens in rabbit models in the treatment of anterior ocular inflammation. The Dex-Lens delivered drug for 7 days in vivo (rabbit model). In an ocular irritation study (Draize test) with Dex-Lens extracts, no adverse events were observed in normal rabbit eyes. Dex-Lenses effectively inhibited suture-induced corneal neovascularization and inflammation for 7 days and lipopolysaccharide-induced anterior uveitis for 5 days. The efficacy of Dex-Lenses was similar to that of hourly-administered dexamethasone eye drops. In the corneal neovascularization study, substantial corneal edema was observed in rabbit eyes that received no treatment and those that wore a vehicle lens as compared to rabbit eyes that wore the Dex-Lens. Throughout these studies, Dex-Lenses were well tolerated and did not exhibit signs of toxicity. Dexamethasone-eluting contact lenses may be an option for the treatment of ocular inflammation and a platform for ocular drug delivery. STATEMENT OF SIGNIFICANCE: Inflammation of the eye can happen either on the ocular surface (i.e. the cornea) or inside the eye, both of which can result in loss of vision or even blindness. Ocular inflammation is normally treated by steroid eye drops. Depending on the type and severity of inflammation, patients may have to take drops every hour for days at a time. Such severe dosing regimen can lead to patients missing doses. Also, more than 95% drug in an eye drop never goes inside the eye. Here we present a contact lens that release a steroid (dexamethasone) for seven days at a time. It is much more efficient than eye drops and a significant improvement since once worn, the patient will avoid missing doses.

Evaluation of commercial soft contact lenses for ocular drug delivery: A review

Soft contact lenses have generated growing interest in ocular drug delivery due to their potential to enhance drug bioavailability in ocular tissues. Commercially available soft contact lenses offer several advantages for ocular drug delivery as they are manufactured on a large scale, which guarantees the availability of a consistent and reproducible product, and their favorable safety profile is well-established through broad clinical use. Here we review the rationale for using commercially available soft contact lenses for ocular drug delivery; summarize the evolution of the materials used in contact lens fabrication; and explore various methods used to improve the drug release characteristics and its tissue penetration. While significant progress has been made, several issues still require further attention for the commercial launch of a viable drug-eluting contact lens product, including control of initial burst release, shelf-life stability, and drug loss during processing or storage.

RETRACTED: Sustained delivery of epalrestat to the retina using PEGylated solid lipid nanoparticles laden contact lens

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. Significant similarities were noticed post-publication between this article and an article submitted to the Journal of Drug Delivery Science and Technology on the same day, by an apparently unrelated research group: Tong Zhang, Tianhui Zhu, Fanyin Wang, Ling Peng and Mingying Lai 60 (2020) 101949 https://doi.org/10.1016/j.jddst.2020.101949 Moreover, the authors did not respond to the journal request to comment on these similarities and to provide the raw data, and the Editor-in-Chief decided to retract the article. One of the conditions of submission of a paper for publication is that authors declare explicitly that their work is original and genuine. As such this article represents a severe abuse of the scientific publishing system.

Contact Lenses as Drug Delivery System for Glaucoma: A Review

Glaucoma is an optical neuropathy associated to a progressive degeneration of retinal ganglion cells with visual field loss and is the main cause of irreversible blindness in the world. The treatment has the aim to reduce intraocular pressure. The first therapy option is to instill drugs on the ocular surface. The main limitation of this is the reduced time of the drug staying on the cornea. This means that high doses are required to ensure its therapeutic effect. A drug-loaded contact lens can diffuse into the post lens tear film in a constant and prolonged flow, resulting in an increased retention of the drug on the surface of the cornea for up to 30 min and thus providing a higher drug bioavailability, increasing the therapeutic efficacy, reducing the amount of administered drug, and thereby provoking fewer adverse events. Several different systems of drug delivery have been studied in recent decades; ranging from more simple methods of impregnating the lenses, such as soaking, to more complex ones, such as molecular imprinting have been proposed. Moreover, different drugs, from those already commercially available to new substances such as melatonin have been studied to improve the glaucoma treatment efficacy. This review describes the role of contact lenses as an innovative drug delivery system to treat glaucoma.

Ocular Drug Delivery Systems Using Contact Lenses

The use of contact lenses as ocular drug delivery systems has been considered intuitive for decades. However, at this time, there are no approved products using such systems. In this article, we review the challenges with current therapies, pharmacokinetics, and pharmacodynamics of different drug classes and the patient population. In addition, we note the relative lack of clinical studies, and list potential products in active development at this time. In particular, we address the alignment of time course of the therapeutic need, the pharmacokinetics of the molecule, and the delivery characteristics of the systems (e.g., pulsatile vs. zero-order). We also discuss the needs of various populations including the elderly (who may have motor and cognitive issues as well as presbyopia) and the young. While a contact lens delivery system may also provide refractive correction, to date, most of the studies have used noncorrective (plano) lenses. We also considered nanotechnology-based carrier systems. We generalize the development of contact lens delivery systems to all ocular delivery systems in which there are relatively few product approvals and long development times.

Pharmacological Advances in the Treatment of Age-related Macular Degeneration

Age-related macular degeneration is an acquired degenerative disease that is responsible for severe loss of vision in elderly people. There are two types: dry age-related macular degeneration and wet age-related macular degeneration. Its treatment has been improved and tries to be tailored in the future. The aim of this review is to summarize the pharmacological advances in the treatment of age-related macular degeneration. Regarding dry AMD, there is no effective treatment to reduce its progression. However, some molecules such as lampalizumab and eculizumab were under investigation, although they have shown low efficacy. Herein, in an attempt to prevent dry AMD progression, the most important studies suggested increasing the antioxidants intake and quitting the smoke habit. On the other hand, wet AMD has more developed treatment. Nowadays, the gold standard treatment is anti-VEGF injections. However, more effective molecules are currently under investigation. There are different molecules under research for dry AMD and wet AMD. This fact could help us treat our patients with more effective and lasting drugs but more clinical trials and safety studies are required in order to achieve an optimal treatment.

Bioresorbable hydrogels prepared by photo-initiated crosslinking of diacrylated PTMC-PEG-PTMC triblock copolymers as potential carrier of antitumor drugs

PTMC-PEG-PTMC triblock copolymers were prepared by ring-opening polymerization of trimethylene carbonate (TMC) in the presence of dihydroxylated poly(ethylene glycol) (PEG) with Mn of 6000 and 10,000 as macro-initiator. The copolymers with different PTMC block Lengths and the two PEGs were end functionalized with acryloyl chloride. The resulting diacrylated PEG-PTMC-DA and PEG-DA were characterized by using NMR, GPC and DSC. The degree of substitution of end groups varied from 50.0 to 65.1%. Hydrogels were prepared by photo-crosslinking PEG-PTMC-DA and PEG-DA in aqueous solution using a water soluble photo-initiator under visible light irradiation. The effects of PTMC and PEG block lengths and degree of substitution on the swelling and weight loss of hydrogels were determined. Higher degree of substitution leads to higher crosslinking density, and thus to lower degree of swelling and weight loss. Similarly, higher PTMC block length also leads to lower degree of swelling and weight loss. Freeze dried hydrogels exhibit a highly porous structure with pore sizes from 20 to 100 µm.

The biocompatibility of hydrogels was evaluated by MTT assay, hemolysis test, and dynamic clotting time measurements. Results show that the various hydrogels present outstanding cyto- and hemo-compatibility. Doxorubicin was taken as a model drug to evaluate the potential of PEG-PTMC-DA and PEG-DA hydrogels as drug carrier. An initial burst release was observed in all cases, followed by slower release up to more than 90%. The release rate is strongly dependent on the degree of swelling. The higher the degree of swelling, the faster the release rate. Finally, the effect of drug loaded hydrogels on SKBR-3 tumor cells was evaluated in comparison with free drug. Similar cyto-toxicity was obtained for drug loaded hydrogels and free drug at comparable drug concentrations. Therefore, injectable PEG-PTMC-DA hydrogels with outstanding biocompatibility and drug release properties could be most promising as bioresorbable carrier of hydrophilic drugs.

Cytosine-functionalized bioinspired hydrogels for ocular delivery of antioxidant transferulic acid

Contact lenses (CLs) are being pointed out as feasible platforms for controlled delivery of ophthalmic drugs. Bioinspired strategies may endow CLs with affinity for a given drug by mimicking its physiological receptor using adequate functional monomers and tuning their conformation in the space through the molecular imprinting technology. However, there are some active substances, such as efficient antioxidant agents, that cannot be used as templates because they degrade during polymerization or even hinder the polymerization itself. Therefore, the development of CLs able to sustain the release of antioxidants for the prevention and/or treatment of several age-related and light-induced eye diseases has not been explored yet. Searching for an alternative bioinspired strategy, the present work relies on the fact that some drugs owe their therapeutic action to their ability to interact with nucleotides that build up DNA and RNA. Thus, the aim of this work was to design hydrogels functionalized with the nitrogenous base cytosine for the controlled uptake and release of transferulic acid (TA) having a complementary chemical structure in terms of hydrogen bonding and π-π stacking ability. Hydrogels were prepared from mixtures of 2-hydroxyethyl methacrylate (HEMA), glycidyl methacrylate (GMA) and ethyleneglycolphenylether methacrylate (EGPEM). GMA was used as a bridge to immobilize cytosine after hydrogel synthesis, while EGPEM was added to reinforce hydrophobic interactions with TA. The hydrogels were characterized in terms of suitability to be used as CLs (swelling, light transmission, mechanical properties, biocompatibility) and capability to host TA and sustain its release in lachrymal fluid while maintaining the antioxidant activity. Relevantly, the bioinspired CLs favored TA accumulation in cornea and sclera tissues.