Enhanced conductivity of rGO/Ag NPs composites for electrochemical immunoassay of prostate-specific antigen

Current Technologies of Electrochemical Immunosensors: Perspective on Signal Amplification

An electrochemical immunosensor employs antibodies as capture and detection means to produce electrical charges for the quantitative analysis of target molecules. This sensor type can be utilized as a miniaturized device for the detection of point-of-care testing (POCT). Achieving high-performance analysis regarding sensitivity has been one of the key issues with developing this type of biosensor system. Many modern nanotechnology efforts allowed for the development of innovative electrochemical biosensors with high sensitivity by employing various nanomaterials that facilitate the electron transfer and carrying capacity of signal tracers in combination with surface modification and bioconjugation techniques. In this review, we introduce novel nanomaterials (e.g., carbon nanotube, graphene, indium tin oxide, nanowire and metallic nanoparticles) in order to construct a high-performance electrode. Also, we describe how to increase the number of signal tracers by employing nanomaterials as carriers and making the polymeric enzyme complex associated with redox cycling for signal amplification. The pros and cons of each method are considered throughout this review. We expect that these reviewed strategies for signal enhancement will be applied to the next versions of lateral-flow paper chromatography and microfluidic immunosensor, which are considered the most practical POCT biosensor platforms.

The influence of copper addition on the electrical conductivity and charge transfer resistance of reduced graphene oxide (rGO)

The possible explanations on how the existence of copper, CuO, or Cu₂O influences the electrical conductivity and electrochemical properties of rGO.

3D Nanostructured Palladium-Functionalized Graphene-Aerogel-Supported Fe3O4 for Enhanced Ru(bpy)32+-Based Electrochemiluminescent Immunosensing of Prostate Specific Antigen

We developed a novel Ru(bpy)₃²⁺-based electrochemiluminescence (ECL) immunosensor utilizing palladium nanoparticle (Pd NP)-functionalized graphene-aerogel-supported Fe₃O₄ (FGA-Pd) for real-sample analysis of prostate specific antigen (PSA). 3D nanostructured FGA-Pd, as a novel ECL carrier, was prepared by in situ reduction. Large amounts of Ru(bpy)₃²⁺ could combine with FGA-Pd via electrostatic interaction to establish a brand-new ECL emitter (Ru@FGA-Pd) for improving ECL efficiency. The obtained Ru@FGA-Pd composite was utilized to label the secondary antibody, which generated strong ECL signals with tripropylamine (TPrA) as a coreactant. Furthermore, we demonstrated that the participation of Pd NPs endowed FGA with favorable electrocatalytic ability in the luminescence process to produce more excited state [Ru(bpy)₃²⁺]* for realizing desirable signal amplification. In addition, the primary antibody was captured by gold nanoparticle (Au NP)-functionalized Fe₂O₃ nanodendrites (Au-FONDs), which possessed good electrical conductivity and favorable biocompatibility. Under optimum conditions, the fabricated sandwich-type ECL immunosensor showed a sensitive response to PSA with a low detection limit of 0.056 pg/mL (S/N = 3) and a calibration range of 0.0001-50 ng/mL. Featuring favorable selectivity, stability, and repeatability, the proposed immunosensor is expected to blaze a novel trail for the real sample detection of PSA and other biomarkers.

Peptide-based electrochemical biosensor for juvenile idiopathic arthritis detection

Juvenile idiopathic arthritis (JIA) is a wide group of diseases, characterized by synovial inflammation and joint tissue damage. Due to the delay in the implementation of biomarkers into clinical practice and the association with severe sequels, there is an imperative need for new JIA diagnosis strategies. Electrochemical biosensors based on screen-printed electrodes and peptides are promising alternatives for molecular diagnosis. In this work, a novel biosensor for detecting juvenile idiopathic arthritis (JIA) was developed based on the immobilization of the PRF+1 mimetic peptide, as recognition biological element, on the surface of screen-printed carbon electrode. This biosensor was able to discriminate the JIA positive and negative serum samples from different individuals using differential pulse voltammetry, presenting limits of detection and quantification in diluted samples of 1:784 (v/v) and 1:235 (v/v), respectively. Evaluation by electrochemical impedance spectroscopy showed R_CT 3 times higher for JIA positive sample than for a pool of human serum samples from healthy individuals. Surface analysis of the biosensor by atomic force microscopy, after contact with JIA positive serum, presented great globular clusters irregularly distributed. The long-term stability of the biosensor was evaluated, remaining functional for over 40 days of storage (after storage at 8°C). Therefore, a simple, miniaturized and selective biosensor was developed, being the first one based on mimetic peptide and screen-printed carbon electrode, aiming at the diagnosis of the juvenile idiopathic arthritis in real serum samples.

Nanomaterial-based biosensors for detection of prostate specific antigen

Screening serum for the presence of prostate specific antigen (PSA) belongs to the most common approach for the detection of prostate cancer. This review (with 156 refs.) addresses recent developments in PSA detection based on the use of various kinds of nanomaterials. It starts with an introduction into the field, the significance of testing for PSA, and on current limitations. A first main section treats electrochemical biosensors for PSA, with subsections on methods based on the use of gold electrodes, graphene or graphene-oxide, carbon nanotubes, hybrid nanoparticles, and other types of nanoparticles. It also covers electrochemical methods based on the enzyme-like activity of PSA, on DNA-, aptamer- and biofuel cell-based methods, and on the detection of PSA via its glycan part. The next main section covers optical biosensors, with subsections on methods making use of surface plasmon resonance (SPR), localized SPR and plasmonic ELISA-like schemes. This is followed by subsections on methods based on the use of fiber optics, fluorescence, chemiluminescence, Raman scattering and SERS, electrochemiluminescence and cantilever-based methods. The most sensitive biosensors are the electrochemical ones, with lowest limits of detection (down to attomolar concentrations), followed by mass cantilever sensing and electrochemilumenescent strategies. Optical biosensors show lower performance, but are still more sensitive compared to standard ELISA. The most commonly applied nanomaterials are metal and carbon-based ones and their hybrid composites used for different amplification strategies. The most attractive sensing schemes are summarized in a Table. The review ends with a section on conclusions and perspectives.

Recent Advances in Electrochemical Immunosensors

Immunosensors have experienced a very significant growth in recent years, driven by the need for fast, sensitive, portable and easy-to-use devices to detect biomarkers for clinical diagnosis or to monitor organic pollutants in natural or industrial environments. Advances in the field of signal amplification using enzymatic reactions, nanomaterials such as carbon nanotubes, graphene and graphene derivatives, metallic nanoparticles (gold, silver, various oxides or metal complexes), or magnetic beads show how it is possible to improve collection, binding or transduction performances and reach the requirements for realistic clinical diagnostic or environmental control. This review presents these most recent advances; it focuses first on classical electrode substrates, then moves to carbon-based nanostructured ones including carbon nanotubes, graphene and other carbon materials, metal or metal-oxide nanoparticles, magnetic nanoparticles, dendrimers and, to finish, explore the use of ionic liquids. Analytical performances are systematically covered and compared, depending on the detection principle, but also from a chronological perspective, from 2012 to 2016 and early 2017.

Polyion oligonucleotide-decorated gold nanoparticles with tunable surface charge density for amplified signal output of potentiometric immunosensor

Methods based on nanostructures have been developed for potentiometric immunosensors, but most involve low sensitivity or weak signal output and are unsuitable for routine use in diagnosis. Herein, we devise an in-situ signal-amplification strategy for enhanced electrical readout of potentiometric immunosensor toward target prostate-specific antigen (PSA, one kind of cancer biomarkers), based on polyion oligonucleotide-labeled gold nanoparticles (AuNPs). To decrease the background signal, monoclonal anti-human PSA capture antibody was covalently conjugated onto an activated glassy carbon electrode via typical carbodiimide coupling. AuNPs heavily functionalized with the polyion oligonucleotides and polyclonal anti-PSA detection antibodies (pAb₂-AuNP-DNA) were utilized as the signal-generation nanotags. In the presence of target PSA, a sandwich-type immunoreaction was executed between capture antibody and detection antibody on the electrode. The detectable signal derived from the shift in the electric potential as a result of the change in the surface charge before and after the antigen-antibody reaction. With target PSA increased, the captured pAb₂-AuNP-DNA to the electrode accompanying detection antibody increased, thereby resulting in the change of the electrode potential. Due to numerous polyion oligonucleotides with the negative charge, the signal readout amplified. Under the optimal conditions, the shift in the output potential was proportional to the logarithm of target PSA concentration and displayed a dynamic linear range from 0.05 to 20 ng mL^-1 with a detection limit of 13.6 pg mL^-1. An intermediate precision of ≤13.2% was accomplished with the batch-to-batch identification. The selectivity was acceptable. The method accuracy was evaluated for human serum specimens, and gave the consistent results between the potentiometric immunosensor and the referenced enzyme-linked immunosorbent assay (ELISA).

Simultaneous determination of trace Cd(II), Pb(II) and Cu(II) by differential pulse anodic stripping voltammetry using a reduced graphene oxide-chitosan/poly-l-lysine nanocomposite modified glassy carbon electrode

The reduced graphene oxide (RGO) and Chitosan (CS) hybrid matrix RGO-CS were coated onto the glassy carbon electrode (GCE) surface, then, poly-l-lysine films (PLL) were prepared by electropolymerization with cyclic voltammetry (CV) method to prepare RGO-CS/PLL modified glassy carbon electrode (RGO-CS/PLL/GCE) for the simultaneous electrochemical determination of heavy metal ions Cd(II), Pb(II) and Cu(II). Combining the advantageous features of RGO and CS, RGO and CS are used together because the positively charged CS can interact with the negatively changed RGO to prevent their aggregation. Furthermore, CS has many amino groups along its macromolecular chains and possessed strongly reactive with metal ions. Moreover, PLL modified electrodes have good stability, excellent permselectivity, more active sites and strong adherence to electrode surface, which enhanced electrocatalytic activity. The RGO-CS/PLL/GCE was characterized voltammetrically using redox couples (Fe(CN)₆^3-/4-), complemented with electrochemical impedance spectroscopy (EIS). Differential pulse anodic stripping voltammetry (DPASV) has been used for the detection of Cd(II), Pb(II) and Cu(II). The detection limit of RGO-CS/PLL/GCE toward Cd(II), Pb(II) and Cu(II) is 0.01μgL^-1, 0.02μgL^-1 and 0.02μgL^-1, respectively. The electrochemical parameters that exert influence on deposition and stripping of metal ions, such as supporting electrolytes, pH value, deposition potential, and deposition time, were carefully studied.