Novel photoelectrochemical immunosensor for disease-related protein assisted by hemin/G-quadruplex-based DNAzyme on gold nanoparticles to enhance cathodic photocurrent on p-CuBi2O4 semiconductor

Manganese doped CdS sensitized graphene/Cu2MoS4 composite for the photoelectrochemical immunoassay of cardiac troponin I

As a newly emerged photoactive material, Cu₂MoS₄ has motivated wide research interests in the field of photoelectrochemistry. Based on manganese doped CdS (CdS:Mn) sensitized graphene (G)/Cu₂MoS₄ composite, we developed a label-free photoelectrochemical (PEC) immunosensor for the detection of cardiac troponin I (cTnI). G as an excellent 2D conductive material, combined with Cu₂MoS₄ could improve its charge transfer efficiency. CdS:Mn nanoparticles (NPs) loaded on G/Cu₂MoS₄ further enlarged the light absorption range of Cu₂MoS₄ and restrained the electron-hole pairs recombination. Under optimal conditions, the proposed PEC immunosensor responded sensitively to cTnI with a low detection limit of 0.18 pg/mL and a wide linear range (0.005-1000 ng/mL). Moreover, as-fabricated immunosensor also exhibited high sensitivity, excellent selectivity and good stability. This work also was extended to real samples analysis and obtained satisfied results.

A new photoelectrochemical immunosensor for ultrasensitive assay of prion protein based on hemin-induced photocurrent direction switching

As a significant biomarker of prion diseases, ultrasensitive assay of infectious isoform of prion (PrP^Sc) is highly desirable for early diagnostics of prion diseases. Herein, taking normal cellular form of prion (PrP^C) as a model owing to a high risk of pathogenicity of PrP^Sc, a new photoelectrochemical immunosensor has been developed based on hemin-induced switching of photocurrent direction. In the presence of PrP^C, nitrogen-doped porous carbon-hemin polyhedra labeled with secondary antibody were introduced onto the CdS-chitosan (CS) nanoparticles-modified indium-tin oxide (ITO) electrode via the antigen-antibody specific recognition. Because of the matched energy level between CdS and hemin, the high-efficiency switch of photocurrent direction of the ITO/CdS-CS photoelectrode from anodic to cathodic photocurrent was observed even at very low concentration (0.4 aM) of PrP^C. Through changing the specific antibody, this method can be easily expanded to PrP^Sc assay. Such low detectable limit is very useful in the early diagnosis and screening of prion diseases. The developed method has also promising applications in bioanalysis, disease diagnostics, and clinical biomedicine.

A carbon-rich nanofiber framework based on a conjugated arylacetylene polymer for photocathodic enzymatic bioanalysis

The metal-free photocathode fabricated by porous carbon-rich nanofiber framework of PTEB film realized “signal-off” photocathodic bioanalysis of glucose.

A label-free aptasensor for ultrasensitive Pb2+ detection based on electrochemiluminescence resonance energy transfer between carbon nitride nanofibers and Ru(phen)32

A label-free aptasensor was developed for ultrasensitive detection of Pb²⁺ based on electrochemiluminescence resonance energy transfer (ECL-RET) from graphitic carbon nitride nanofibers (CNNFs) to Ru(phen)₃²⁺. The CNNFs synthesized via a facile two-step hydrolysis-electrolysis strategy showed intense and stable ECL signal by taking advantages of amplifying and stabilizing effect of carbon nanotubes and Au nanoparticles. After the specific hybridation between capture DNA and Pb²⁺ specific aptamer, Ru(phen)₃²⁺ could be captured onto CNNFs modified electrode by effectively intercalating into the grooves of double-strand DNA, thus triggering the ECL-RET and leading to highly enhanced ECL intensity. The presence of Pb²⁺ would result in the detachment of Ru(phen)₃²⁺ and then the inhibition of ECL-RET. Then Pb²⁺ concentration could be quantified based on ECL change before and after introduction of Pb²⁺. The target recycling based on exonuclease I (Exo I) mediated digestion of Pb²⁺-aptamer complex was implemented to further improve the sensitivity. These synergistic amplification strategies enabled the aptasensor to be ultrasensitive for Pb²⁺ determination with a detection limit of 0.04 pM. The proposed probe was utilized to analyze environmental samples with satisfactory results.

Recent uses of carbon nanotubes & gold nanoparticles in electrochemistry with application in biosensing: A review

The innovation of nanoparticles assumes a critical part of encouraging and giving open doors and conceivable outcomes to the headway of new era devices utilized as a part of biosensing. The focused on the quick and legitimate detecting of specific biomolecules using functionalized gold nanoparticles (Au NPs), and carbon nanotubes (CNTs) has turned into a noteworthy research enthusiasm for the most recent decade. Sensors created with gold nanoparticles or carbon nanotubes or in some cases by utilizing both are relied upon to change the very establishments of detecting and distinguishing various analytes. In this review, we will examine the current utilization of functionalized AuNPs and CNTs with other synthetic mixes for the creation of biosensor prompting to the location of particular analytes with low discovery cutoff and quick reaction.

Dual-mode fluorescent and colorimetric immunoassay for the ultrasensitive detection of alpha-fetoprotein in serum samples

We present a novel dual-mode fluorescent and colorimetric immunosensor based on conventional immunoassay platforms by utilizing a gold nanoflower (AuNF)-loaded fluorescein molecule (AuNF@Fluorescein) as signal output. The AuNFs were modified with thiolated carboxyl ligand, which consisted of a hydrophobic alkane chain as hydrophobic wallet for fluorescein encapsulation, a tetra (ethylene glycol) unit for biocompatibility and solubility, and a functional carboxyl group for the conjugation of biorecognition molecules for biosensing. The resultant AuNFs showed a high loading capacity of 3.74 × 10⁶ fluorescein molecules per AuNF because of its flower-like shape with many complex branches. By adjusting the solution pH to 8.0, the fluorescein molecules can almost entirely be released from the hydrophobic wallet of AuNF@Fluorescein, which led to strong fluorescent-signal amplification. Under the optimal detection conditions, the proposed immunoassay based on fluorescent signal exhibited ultrahigh sensitivity for alpha-fetoprotein (AFP) detection, with a limit of detection (LOD) of 29 fg/mL. This value is approximately 9.3 × 10³-fold lower than that of corresponding horseradish peroxidase (HRP)-based immunoassay (LOD = 270 pg/mL). The fluorescein molecule also had intrinsic peroxidase-like activity to catalyze 3,3',5,5'-tetramethylbenzidine oxidation with hydrogen peroxide for colorimetric signal. The proposed method with colorimetric mode further exhibited a sensitivity with a LOD of 17.7 pg/mL, which is about 15-fold lower than that of conventional HRP-based immunoassay. The recoveries of the proposed dual-mode immunoassay for AFP spiked serum samples ranged within 89.85%-100.0%, with the coefficient of variations ranging from 0.5% to 2.4%, indicating acceptable accuracy and precision for AFP quantitative detection. The reliability of the developed dual-mode immunoassay was further compared with a commercial chemiluminescence immunoassay kit by analyzing 20 clinical serum samples, showing that the two methods well agreed with each other, with high correlation coefficients of 0.997 and 0.986 based on recorded fluorescence and colorimetric signals, respectively. In summary, the proposed method was highly suitable for the ultrasensitive analysis of biomarkers or infectious diseases by fluorescence mode and can be used for routine clinical diagnosis by colorimetric mode.

Photoelectrochemical biosensing of disease marker on p-type Cu-doped Zn0.3Cd0.7S based on RCA and exonuclease III amplification

In this work, a new "signal-on" split-type photoelectrochemical (PEC) sensing platform for prostate-specific antigen (PSA) detection was successfully constructed using p-type Cu-doped Zn_0.3Cd_0.7S as the photosensitive semiconductor material and target-triggered rolling circle amplification (RCA) for signal amplification. The signal derived from Cu-doped Zn_0.3Cd_0.7S was amplified by hemin/G-quadruplex. Upon target PSA introduction, the aptamer-primer probe (apt-pri) was captured by capture antibody-conjugated magnetic bead (MB-mAb) to form the sandwiched MB-mAb/PSA/apt-pri. The complex could initiate the RCA reaction to produce a long single-stranded DNA that provided binding sites for G-rich DNA and to form long single-stranded DNA/G-quadruplex/hemin. Upon the addition of exonuclease III (Exo III), the hemin/G-quadruplex immobilized on the RCA long product could be released by the digestion of Exo III. The hemin/G-quadruplex complexes in this study were used as efficient electron acceptors to neutralize the photoelectrons generated from the semiconductor and hindered the recombination of charges, thus enhancing the photocurrent. Under the optimum conditions, the developed sensing system displayed a good analytical performance with a linear range of 0.05-40 ng mL^-1 PSA and a detection limit of 16.3 pg mL^-1. Furthermore, good selectivity, high anti-interference ability, satisfactory reproducibility, and good accuracy were also achieved. These prominent analytical properties revealed that our strategy might be a potential and reliable tool for the detection of PSA.

Solution growth of 3D MnO2 mesh comprising 1D nanofibres as a novel sensor for selective and sensitive detection of biomolecules

This work is the first report describing the solution grown 3D manganese oxide nanofibrous (MnO₂ NFs) mesh and its potential for the simultaneous detection of biomolecules such as ascorbic acid and uric acid. The mesh is synthesized by a facile, one-pot, and cost-effective hydrothermal approach without using any template or structure directing compound. The morphology consists of randomly placed nanofibres possessing a diameter in the range of 10-25 nm, and length of several micron; constituting a highly porous and flexible material. The electrochemical potential was examined by recording cyclic voltammetry signals towards ascorbic acid and uric acid. The special mesh morphology offers a large surface area to promote enhanced electrochemical activity, and also provided a macroporous network that supported efficient mass transport. Additionally, the strong electronic cloud and roughness of MnO₂ NFs mesh facilitated the fast oxidation of species at very low potential. The lower detection limit was found to be 1.33 µM (S/N = 3) and 1.03 µM (S/N = 3) for ascorbic acid and uric acid, respectively. The MnO₂ NFs mesh modified electrodes can robustly differentiate both of them by giving well separate signals (Δ = 500 mV) indicating capability of the material towards selective detection. The sensor has been successfully applied to human blood and urine samples and the recoveries were found statistically significant. These results demonstrate the practical feasibility of 3D mesh to develop sensors for the accurate diagnosis of clinically important molecules.

Exciton-Plasmon Interaction between AuNPs/Graphene Nanohybrids and CdS Quantum Dots/TiO2 for Photoelectrochemical Aptasensing of Prostate-Specific Antigen

A competitive-displacement reaction strategy based on target-induced dissociation of gold nanoparticle coated graphene nanosheet (AuNPs/GN) from CdS quantum dot functionalized mesoporous titanium dioxide (CdS QDs/TiO₂) was designed for the sensitive photoelectrochemical (PEC) aptasensing of prostate-specific antigen (PSA) through the exciton-plasmon interaction (EPI) between CdS QDs and AuNPs. To construct such an aptasensing system, capture DNA was initially conjugated covalently onto CdS QDs/TiO₂-modified electrode, and then AuNPs/GN-labeled PSA aptamer was bound onto biofunctionalized CdS QDs/TiO₂ via hybridization chain reaction of partial bases with capture DNA. Introduction of AuNPs/GN efficiently quenched the photocurrent of CdS QDs/TiO₂ thanks to energy transfer. Upon addition of target PSA, the sandwiched aptamer between CdS QDs/TiO₂ and AuNPs/GN reacted with the analyte analyte, thus resulting in the dissociation of AuNPs/GN from the CdS QDs/TiO₂ to increase the photocurrent. Under optimum conditions, the aptasensing platform exhibited a high sensitivity for PSA detection within a dynamic linear range of 1.0 pg/mL to 8.0 ng/mL at a low limitat of detection of 0.52 pg/mL. The interparticle distance of exciton-plasmon interaction and contents of AuNPs corresponding to EPI effect in this system were also studied. Good selectivity and high reproducibility were obtained for the analysis of target PSA. Importantly, the accuracy and matrix effect of PEC aptasensor was evaluated for the determination of human serum specimens and newborn calf serum-diluted PSA standards, giving a well-matched result with the referenced PSA ELISA kit.

Spatial-Resolved Photoelectrochemical Biosensing Array Based on a CdS@g-C3N4 Heterojunction: A Universal Immunosensing Platform for Accurate Detection

The detection of biomarkers with high sensitivity and accuracy in real biosamples remains challenging. Herein, a universal spatial-resolved photoelectrochemical (PEC) ratiometry for biodetection of prostate-specific antigen (PSA) as model biomarker was designed for the first time based on a dual-electrode array modified by CdS@g-C₃N₄ heterojunction coupled with CuS quantum dots (QDs) as signal amplification tags. Specifically, a new kind of photoactive material, the CdS@g-C₃N₄ p-n heterojunction with high photoelectric conversion efficiency and good chemical stability, was synthesized and immobilized on two spatial-resolved electrodes (WE1 and WE2). After immobilizing gold nanoparticles and capturing PSA antibodies on the electrodes, WE1 incubated with various concentrations of PSA was taken as a working electrode, whereas WE2 with a fixed concentration of PSA was used as an internal reference electrode. Next, signal antibodies of PSA-labeled CuS QDs as PEC signal quenchers were immobilized on the electrodes to form a sandwich-type immunocomplex. With the aid of a multiplexed disjunctor, the PEC responses of the dual electrodes were recorded, and the PSA was quantified via the ratio values of photocurrent intensities from WE1 and WE2. Combining the fine PEC performance of the CdS@g-C₃N₄ heterojunction with the superior quenching effect of CuS QDs in the spatial-resolved platform, the ratiometric system exhibits a linear range from 1.0 × 10^-11 to 5.0 × 10^-8 g mL^-1 with a limit of detection of 4.0 pg mL^-1. The results demonstrated herein may provide a new pattern for biomarker detection with high accuracy and good specificity as well as satisfactory applicability in real biosamples.

WS2 nanosheets-sensitized CdS quantum dots heterostructure for photoelectrochemical immunoassay of alpha-fetoprotein coupled with enzyme-mediated biocatalytic precipitation

A sensitive photoelectrochemical immunoassay for AFP was developed via signal enhancement of WS₂/CdS heterojunction and signal quenching of enzyme-mediated biocatalytic precipitation.

Label-free detection of cytochrome C by a conducting polymer-based impedimetric screen-printed aptasensor

In this study we have introduced a new sensitive and selective biosensor for the determination of cytochrome C (Cyt C) as a biomarker for cell apoptosis.

Construction and Potential Applications of Biosensors for Proteins in Clinical Laboratory Diagnosis

Biosensors for proteins have shown attractive advantages compared to traditional techniques in clinical laboratory diagnosis. In virtue of modern fabrication modes and detection techniques, various immunosensing platforms have been reported on basis of the specific recognition between antigen-antibody pairs. In addition to profit from the development of nanotechnology and molecular biology, diverse fabrication and signal amplification strategies have been designed for detection of protein antigens, which has led to great achievements in fast quantitative and simultaneous testing with extremely high sensitivity and specificity. Besides antigens, determination of antibodies also possesses great significance for clinical laboratory diagnosis. In this review, we will categorize recent immunosensors for proteins by different detection techniques. The basic conception of detection techniques, sensing mechanisms, and the relevant signal amplification strategies are introduced. Since antibodies and antigens have an equal position to each other in immunosensing, all biosensing strategies for antigens can be extended to antibodies under appropriate optimizations. Biosensors for antibodies are summarized, focusing on potential applications in clinical laboratory diagnosis, such as a series of biomarkers for infectious diseases and autoimmune diseases, and an evaluation of vaccine immunity. The excellent performances of these biosensors provide a prospective space for future antibody-detection-based disease serodiagnosis.

Aptasensor Based on Hierarchical Core-Shell Nanocomposites of Zirconium Hexacyanoferrate Nanoparticles and Mesoporous mFe3O4@mC: Electrochemical Quantitation of Epithelial Tumor Marker Mucin-1

A novel nanostructured hierarchical core-shell nanocomposite of zirconium hexacyanoferrate (ZrHCF) and a mesoporous nanomaterial composed of Fe₃O₄ and carbon nanospheres (denoted as ZrHCF@mFe₃O₄@mC) was prepared and used as a novel platform for an aptasensor to detect the epithelial tumor marker mucin-1 (MUC1) sensitively and selectively. The prepared ZrHCF@mFe₃O₄@mC nanocomposite exhibited good chemical functionality, water stability, and high specific surface area. Therefore, large amounts of aptamer molecules resulted in high sensitivity of the developed electrochemical aptasensor toward traces of MUC1. The constructed sensor also showed a good linear relationship with the logarithm of MUC1 concentration in the broad range of 0.01 ng·mL^-1 to 1.0 μg·mL^-1, with a low detection limit of 0.90 pg·mL^-1. The fabricated ZrHCF@mFe₃O₄@mC-based aptasensor exhibited not only high selectivity because of the formation of aptamer-MUC1 complex but also good stability, acceptable reproducibility, and applicability. The proposed novel strategy based on a newly prepared hierarchical core-shell nanocomposite demonstrated outstanding biosensing performance and presents potential applications in biomedical fields.

Tetrahedral DNA probe coupling with hybridization chain reaction for competitive thrombin aptasensor

A novel competitive aptasensor for thrombin detection is developed by using a tetrahedral DNA (T-DNA) probe and hybridization chain reaction (HCR) signal amplification. Sulfur and nitrogen co-doped reduced graphene oxide (SN-rGO) is firstly prepared by a simple reflux method and used for supporting substrate of biosensor. Then, T-DNA probe is modified on the electrode by Au-S bond and a competition is happened between target thrombin and the complementary DNA (cDNA) of aptamer. The aptamer binding to thrombin forms an aptamer-target conjugate and make the cDNA remained, and subsequently hybridizes with the vertical domain of T-DNA. Finally, the cDNAs trigger HCR, which results in a great current response by the catalysis of horseradish peroxidase to the hydrogen peroxide + hydroquinone system. For thrombin detection, the proposed biosensor shows a wide linearity range of 10^-13-10^-8M and a low detection limit of 11.6fM (S/N = 3), which is hopeful to apply in biotechnology and clinical diagnosis.

Hemin/Au nanorods/self-doped TiO2nanowires as a novel photoelectrochemical bioanalysis platform

A sensitive photoelectrochemical platform for GSH was developed by modifying self-doped TiO₂nanowires with mixed Au nanorods at two different aspect ratios as the core sensing unit and hemin for recognition.

In situ synthesis of fluorescent polydopamine nanoparticles coupled with enzyme-controlled dissolution of MnO2 nanoflakes for a sensitive immunoassay of cancer biomarkers

A new fluorescence/visual immunosensing strategy was designed for the AFP detection coupling enzyme-controlled formation of polydopamine and dissolution of MnO₂ nanoflakes.