Effect of hydroxypropylcellulose and Tween 80 on physicochemical properties and bioavailability of ezetimibe-loaded solid dispersion

Comparison of a revaprazan-loaded solid dispersion, solid SNEDDS and inclusion compound: Physicochemical characterisation and pharmacokinetics

The aim of this research was to compare three strategies for enhancing the solubility of poorly water-soluble revaprazan hydrochloride: solid dispersion, solid SNEDDS and inclusion compound. The influence of polymers, surfactants and oils on the drug solubility was assessed, and via the chosen carriers, the three types of formulations were prepared utilising spray drying technique. Their physicochemical properties, solubility, dissolution and pharmacokinetics in rats were performed compared with revaprazan powder. Among the liquid SNEDDS formulations assessed, the compositions of revaprazan, peceol, Tween 80 and Labrasol (10:15:55:30, weight ratio) provided the smallest emulsion size. Moreover, this liquid SNEDDS and dextran were suspended/dissolved in distilled water, and spray-dried, producing an optimal revaprazan-loaded solid SNEDDS. The appropriate solid dispersion and inclusion compound were composed of revaprazan, hydroxypropylmethylcellulose and cremophor A25 (5:1.4:5.6) and drug and hydroxyl-β-cyclodextrin (2.5:8.77), respectively. The crystalline drug was converted to an amorphous state in all formulations. In the solid dispersion, the drug was attached to the hydrophilic carrier. The solid SNEDDS and inclusion compound contained aggregate microspheres and separate microspheres, respectively. All formulations significantly increased the drug solubility, dissolution, plasma concentration and AUC compared with revaprazan powder. These properties were ranked in the order solid dispersion ≥ solid SNEDDS > inclusion compound. Particularly, the solid dispersion improved about 9500-fold drug solubility and 10-fold oral bioavailability. Thus, the improved properties were considerably dependent upon these techniques, although all of the techniques employed similar mechanisms. Among the strategies checked, the solid dispersion system would be recommended as an oral revaprazan-loaded pharmaceutical product.

Proniosomes derived niosomes: recent advancements in drug delivery and targeting

Vesicular drug delivery systems have gained wide attention in the field of nanotechnology. Among them proniosomes become the superior over other vesicular carriers. Proniosomes are dry formulations of water soluble nonionic surfactant coated carrier system which immediately forms niosomes upon hydration. They have the capability to overcome the instability problems associated with niosomes and liposomes and have the potential to improve solubility, bioavailability, and absorption of various drugs. Furthermore, they offer versatile drug delivery concept for enormous number of hydrophilic and hydrophobic drugs. They have the potential to deliver drugs effectively through different routes at specific site of action to achieve controlled release action and reduce toxic effects associated with drugs. This review discusses the general preparation techniques of proniosomes and mainly focus on the applications of proniosomes in drug delivery and targeting. Moreover, this review demonstrates critical appraisal of the literature for proniosomes. Additionally, this review extensively explains the potential of proniosomes in delivering drugs via different routes, such as oral, parenteral, dermal and transdermal, ocular, oral mucosal, vaginal, pulmonary, and intranasal. Finally, the comparison of proniosomes with niosomes manifests the clear distinction between them. Moreover, proniosomes need to be explored for proteins and peptide delivery and in the field of nutraceuticals and develop pilot plant scale up studies to investigate them in industrial set up.

A novel solid self-nanoemulsifying drug delivery system (S-SNEDDS) for improved stability and oral bioavailability of an oily drug, 1-palmitoyl-2-linoleoyl-3-acetyl-rac-glycerol

To develop a novel solid self-nanoemulsifying drug delivery system (S-SNEDDS) for a water-insoluble oily drug, 1-palmitoyl-2-linoleoyl-3-acetyl-rac-glycerol (PLAG) with improved stability and oral bioavailability, numerous S-SNEDDS were prepared with surfactant, hydrophilic polymer, antioxidant, and calcium silicate (porous carrier) using the spray-drying method. Their physicochemical properties were evaluated using emulsion droplet size analysis, SEM and PXRD. Moreover, the solubility, dissolution, stability, and pharmacokinetics of the selected S-SNEDDS were assessed compared with the drug and a commercial soft capsule. Sodium lauryl sulfate (SLS) and hydroxypropyl methylcellulose (HPMC) with the highest drug solubility were selected as surfactant and hydrophilic polymer, respectively. Among the antioxidants tested, only butylated hydroxyanisole (BHA) could completely protect the drug from oxidative degradation. The S-SNEDDS composed of PLAG/SLS/HPMC/BHA/calcium silicate at a weight ratio of 1: 0.25: 0.1: 0.0002: 0.5 provided an emulsion droplet size of less than 300 nm. In this S-SNEDDS, the drug and other ingredients might exist in the pores of carrier and attach onto its surface. It considerably improved the drug stability (about 100 vs. 70%, 60 °C for 5 d) and dissolution (about 80 vs. 20% in 60 min) compared to the commercial soft capsule. Moreover, the S-SNEDDS gave higher AUC, Cmax, and Tmax values than the commercial soft capsule; in particular, the former improved the oral bioavailability of PLAG by about 3-fold. Our results suggested that this S-SNEDDS provided excellent stability and oral bioavailability of PLAG. Thus, this S-SNEDDS would be recommended as a powerful oral drug delivery system for an oily drug, PLAG.

Nano-sized solid dispersions based on hydrophobic-hydrophilic conjugates for dissolution enhancement of poorly water-soluble drugs

The aim of this study was to investigate hydrophilic-hydrophobic conjugates as new carriers for nano-sized solid dispersions (SDs). The amphiphilic conjugates were prepared via an esterification reaction between hydroxypropyl methylcellulose (HPMC) and zein. Four formulations of conjugates were investigated with different ratios of zein to HPMC (1:5, 1:10, 1:20, and 1:40). Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy and particle size analyses were performed to characterize and optimize the formulation for SD. Isradipine and prednisolone were chosen as poorly water-soluble drugs for SD using the conjugate as a carrier. Dissolution tests, particle size analyses, powder X-ray diffraction and FTIR were conducted to determine the dissolution enhancement and its mechanism. The conjugate formed small particles as a self-assembled carrier. Although the SD with isradipine or prednisolone showed a small increase in particle size, the dissolution rate of those drugs in SD increased significantly compared to pure drugs. The interaction between the drug and conjugate was attributed to the formation of small particles and changes to the drug crystallinity. This study demonstrated that the hydrophilic-hydrophobic conjugate is a promising material for SD, with the potential of reducing drug particles to nano size in addition to promoting drug amorphousness or molecular interactions.

Stabilizing ability of surfactant on physicochemical properties of drug nanoparticles generated from solid dispersions

This study was aimed to examine the nanoparticle formation from redispersion of binary and ternary solid dispersions. Binary systems are composed of various ratios of glibenclamide (GBM) and polyvinylpyrrolidone K30 (PVP-K30), whereas a constant amount at 2.5%w/w of a surfactant, sodium lauryl sulfate (SLS) or Gelucire44/14 (GLC), was added to create ternary systems. GBM nanoparticles were collected after the systems were dispersed in water for 15 min. The obtained nanoparticles were characterized for size distribution, crystallinity, thermal behavior, molecular structure, and dissolution properties. The results indicated that GBM nanoparticles could be formed when the drug content of the systems was lower than 30%w/w in binary systems and ternary systems containing SLS. The particle size ranged from 200 to 500 nm in diameter with narrow size distribution. The particle size was increased with increasing drug content in the systems. The obtained nanoparticles were spherical and showed the amorphous state. Furthermore, because of being amorphous form and reduced particle size, the dissolution of the generated nanoparticles was markedly improved compared with the GBM powder. In contrast, all the ternary solid dispersions prepared with GLC anomalously provided the crystalline particles with the size ranging over 5 µm and irregular shape. Interestingly, this was irrelevant to the drug content in the systems. These results indicated the ability of GLC to destabilize the polymer network surrounding the particles during particle precipitation. Therefore, this study suggested that drug content, quantity, and type of surfactant incorporated in solid dispersions drastically affected the physicochemical properties of the precipitated particles.

Improved stability of solid dispersions of manidipine with polyethylene glycol 4000/copovidone blends: application of ternary phase diagram

CONTEXT

Manidipine (MDP) is generally used clinically as an antihypertensive agent; however, the bioavailability of orally administered MDP is limited due to their very low water solubility.

OBJECTIVE

The objectives of this research were, therefore, to increase the solubility of MDP by the formation of ternary solid dispersions (tSD) with polyethylene glycol 4000 (PEG4000) and copovidone and to improve their stability.

METHODS

Solid ternary phase diagram was constructed to find homogeneous solid dispersion region after melting and solidifying at low temperature with different quenching substances. The pulverized powder of solid dispersions was then determined, for their physicochemical properties, by differential scanning calorimetry, powder X-ray diffractometry, Fourier transform infrared (FTIR) spectroscopy and hot stage microscopy. The solubility and dissolution of MDP from the tSD were investigated. The physical stability of tSD was also determined under accelerated condition at 40 °C/75% relative humidity (RH) for 6 months.

RESULTS AND DISCUSSION

The results showed that MDP was molecularly dispersed in PEG4000 and copovidone when the tSD was created from homogeneous region of solid ternary phase diagram. FTIR results confirmed that strong hydrogen bonding was presented between MDP and copovidone, leading to a significant increase in the solubility and dissolution of MDP. After storage at accelerated condition (40 °C/75%RH) for 6 months, the tSD still showed a good appearance and high solubility.

CONCLUSION

The results of this study suggest that tSD prepared by melting has promising potential for oral administration and may be an efficacious approach for improving the therapeutic potential of MDP.

Improved dissolution of Kaempferia parviflora extract for oral administration by preparing solid dispersion via solvent evaporation

Kaempferia parviflora, a plant in the family Zingiberaceae, has been used in Thai traditional medicines for treating hypertension and promoting longevity with good health and well-being. However, its limited aqueous solubility and low dissolution restrict its bioavailability. The aim of the study was therefore to improve the dissolution rate of K. parviflora extracted with dichloromethane (KPD) by solid dispersions. Different water-soluble polymers were applied to improve dissolution of KPD. The solid dispersions in different ratios were prepared by solvent evaporation method. Only hydroxypropyl methylcellulose (HPMC) and polyvinyl alcohol-polyethylene glycol grafted copolymer (PVA-co-PEG) could be used to produce homogeneous, powdered solid dispersions. Physical characterization by scanning electron microscopy, hot stage microscopy, differential scanning calorimetry and powder X-ray diffractometry, in comparison with corresponding physical mixtures, showed the changes in solid state during the formation of solid dispersions. Dissolution of a selected marker, 5,7,4′-trimethoxyflavone (TMF), from KPD/HPMC and KPD/PVA-co-PEG solid dispersions was significantly improved, compared with pure KPD. The dissolution enhancement by solid dispersion was influenced by both type and content of polymers. The stability of KPD/HPMC and KPD/PVA-co-PEG solid dispersions was also good after 6-month storage in both long-term and accelerated conditions. These results identified that the KPD/HPMC and KPD/PVA-co-PEG solid dispersions were an effective new approach for pharmaceutical application of K. parviflora.

Hydroxypropylcellulose as matrix carrier for novel cage-like microparticles prepared by spray-freeze-drying technology

The objective of this study is to design novel dissolution-enhanced microparticles loaded poorly soluble drug nanocrystals used a low viscosity of hydroxypropylcellulose (HPC) as matrix carrier. An interesting approach combined homogenization and the spray-freeze-drying technique was developed. The results demonstrated that the ratio of HPC to drug played an important role in size-reduction efficiency of drug during homogenization. And the formation of cage-like structure of the composite particles depended on ratio of HPC to drug. The spray-freeze-dried composite particles with HPC ratio of 1:2, 1:1 and 2:1 possessed excellent redispersibility, which attributed to its porous matrix and large surface area (3000m²/g). The dissolution of spray-freeze-dried composite particles with higher ratios of HPC (1:2 and 1:1) was significantly enhanced, which attributed to the particle size reduction of drug. The HPC could immobilize drug nanocrystals in its cage-like structure and prevent it from the subsequent agglomeration during storage. In conclusion, the prepared cage-like microparticles is a promising basis for further formulation development.

Comparison of solvent-wetted and kneaded l-sulpiride-loaded solid dispersions: Powder characterization and in vivo evaluation

The purpose of this study was to compare the powder properties, solubility, dissolution and oral absorption of solvent-wetted (SWSD) and kneaded (KNSD) l-sulpiride-loaded solid dispersions. The SWSD and KNSD were prepared with silicon dioxide, sodium laurylsulfate and D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) using a spray dryer and high shear mixer, respectively. Their powder properties, solubility, dissolution and oral absorption were assessed compared to l-sulpiride powder. The drug in SWSD was in the amorphous state; however, in KNSD, it existed in the crystalline state. The SWSD with a drug/sodium laurylsulphate/TPGS/silicon dioxide ratio of 5/1/2/12 gave the higher drug solubility and dissolution compared to the KNSD with the same composition. The oral absorption of drug in the SWSD was 1.4 fold higher than the KNSD and 3.0 fold higher than the l-sulpiride powder (p<0.05) owing to better solubility and reduced crystallinity. Furthermore, the SWSD at the half dose was bioequivalent of commercial l-sulpiride-loaded product in rats. Thus, the SWSD with more improved oral absorption would be recommended as an alternative for the l-sulpiride-loaded oral administration.

Influence of polyvinylpyrrolidone quantity on the solubility, crystallinity and oral bioavailability of fenofibrate in solvent-evaporated microspheres

The objective of this study is to explore the influence of polyvinylpyrrolidone (PVP) quantity on the solubility, crystallinity and oral bioavailability of poorly water-soluble fenofibrate in solvent-evaporated microspheres. Numerous microspheres were prepared with fenofibrate, sodium lauryl sulphate (SLS) and PVP using the spray-drying technique. Their aqueous solubility, dissolution, physicochemical properties and pharmacokinetics in rats were assessed. The drug in the solvent-evaporated microspheres composed of fenofibrate, PVP and SLS at the weight ratio of 1:0.5:0.25 was not entirely changed to the amorphous form and partially in the microcrystalline state. However, the microspheres at the weight ratio of 1:4:0.25 provided the entire conversion to the amorphous form. The latter microspheres, with an improvement of about 115 000-fold in aqueous solubility and 5.6-fold improvement in oral bioavailability compared with the drug powder, gave higher aqueous solubility and oral bioavailability compared with the former. Thus, PVP quantity played an important role in these properties of fenofibrate in the solvent-evaporated microspheres.

Novel piroxicam-loaded nanospheres generated by the electrospraying technique: physicochemical characterisation and oral bioavailability evaluation

To determine if a novel electrospraying technique could be applied to an oral drug delivery system for improving the solubility and oral bioavailability of poorly water-soluble piroxicam; the nanospheres were generated with drug and polyvinylpyrrolidone (PVP) using electrospraying technique; and their physicochemical properties, solubility, release and pharmacokinetics were evaluated in comparison with piroxicam powder. All nanospheres had significantly increased drug solubility and dissolution rates in comparison with the drug powder. In particular, the nanosphere composed of piroxicam and PVP at a weight ratio of 2:8 gave about 600-fold higher solubility, 15-fold higher release rate and 3-fold higher AUC in comparison to piroxicam powder, leading to significantly enhanced oral bioavailability in rats, due to the mingled effect of nanonisation along with transformation to the amorphous state. Thus, this electrospraying technique can be utilised to produce a novel oral nanosphere delivery system with enhanced solubility and oral bioavailability for poorly water-soluble piroxicam.

Effect of HM30181 mesylate salt-loaded microcapsules on the oral absorption of paclitaxel as a novel P-glycoprotein inhibitor

The purpose of this study was to develop HM30181 mesylate salt (HM30181M)-loaded microcapsules as a novel P-glycoprotein inhibitor for enhancing the oral absorption of paclitaxel. The effect of various carriers including hydrophilic polymers and solvents on the solubility of HM30181M were evaluated. Among the hydrophilic polymers and solvents tested, HPMC and methylene chloride (and ethanol) provided the highest HM30181M solubility. Numerous HM30181M-loaded microcapsules were prepared with HPMC, silicon dioxide and acidifying agents using a spray-drying technique, and their solubility, dissolution and physicochemical properties were evaluated. Furthermore, a pharmacokinetic study was performed after oral administration of paclitaxel alone, simultaneously with HM30181M powder or HM30181M-loaded microcapsules to rats. Among the acidifying agents investigated, phosphoric acid provided the best improvement in the solubility and dissolution of HM30181M. Moreover, the microcapsule composed of HM30181M, HPMC, silicon dioxide and phosphoric acid at a weight ratio of 3:6:3:2 remarkably enhanced the solubility and dissolution of HM30181M compared with the HM30181M powder alone. The microcapsules were spherical in shape, had a reduced particle size of about 7μm, and contained HM30181M in an amorphous state. Furthermore, this microcapsule significantly enhanced HM30181M absorption, making it about 1.7-fold faster and 1.6-fold greater after simultaneous administration, leading to about 70- and 2-fold improved oral bioavailability of paclitaxel compared with paclitaxel alone and the simultaneous administration with HM30181M powder, respectively. Thus, this novel microcapsule could be a potential candidate for effective P-glycoprotein inhibition during oral administration of paclitaxel.

Amorphous solid dispersion technique for improved drug delivery: basics to clinical applications

Solid dispersion has emerged as a method of choice and has been extensively investigated to ascertain the in vivo improved performance of many drug formulations. It generally involves dispersion of drug in amorphous particles (clusters) or in crystalline particles. Comparatively, in the last decade, amorphous drug-polymer solid dispersion has evolved into a platform technology for delivering poorly water-soluble small molecules. However, the success of this technique in the pharmaceutical industry mainly relies on different drug-polymer attributes like physico-chemical stability, bioavailability and manufacturability. The present review showcases the efficacy of amorphous solid dispersion technique in the research and evolution of different drug formulations particularly for those with poor water soluble properties. Apart from the numerous mechanisms of action involved, a comprehensive summary of different key parameters required for the solubility enhancement and their translational efficacy to clinics is also emphasized.

Comparative study on solid self-nanoemulsifying drug delivery and solid dispersion system for enhanced solubility and bioavailability of ezetimibe

Background

The objective of this study was to compare the physicochemical characteristics, solubility, dissolution, and oral bioavailability of an ezetimibe-loaded solid self-nanoemulsifying drug delivery system (SNEDDS), surface modified solid dispersion (SMSD), and solvent evaporated solid dispersion (SESD) to identify the best drug delivery system with the highest oral bioavailability.

Methods

For the liquid SNEDDS formulation, Capryol 90, Cremophor EL, and Tween 80 were selected as the oil, surfactant, and cosurfactant, respectively. The nanoemulsion-forming region was sketched using a pseudoternary phase diagram on the basis of reduced emulsion size. The optimized liquid SNEDDS was converted to solid SNEDDS by spray drying with silicon dioxide. Furthermore, SMSDs were prepared using the spray drying technique with various amounts of hydroxypropylcellulose and Tween 80, optimized on the basis of their drug solubility. The SESD formulation was prepared with the same composition of optimized SMSD. The aqueous solubility, dissolution, physicochemical properties, and pharmacokinetics of all of the formulations were investigated and compared with the drug powder.

Results

The drug existed in the crystalline form in SMSD, but was changed into an amorphous form in SNEDDS and SESD, giving particle sizes of approximately 24, 6, and 11 µm, respectively. All of these formulations significantly improved the aqueous solubility and dissolution in the order of solid SNEDDS ≥ SESD > SMSD, and showed a total higher plasma concentration than did the drug powder. Moreover, SESD gave a higher area under the drug concentration time curve from zero to infinity than did SNEDDS and SMSD, even if they were not significantly different, suggesting more improved oral bioavailability.

Conclusion

Among the various formulations tested in this study, the SESD system would be strongly recommended as a drug delivery system for the oral administration of ezetimibe with poor water solubility.