Biosynthesis of xanthan gum by Xanthomonas campestris LRELP-1 using kitchen waste as the sole substrate

Valorisation of chicken feathers for xanthan gum production using Xanthomonas campestris MO-03

Xanthan gum is an important commercial polysaccharide produced by Xanthomonas species. In this study, xanthan production was investigated using a local isolate of Xanthomonas campestris MO-03 in medium containing various concentrations of chicken feather peptone (CFP) as an enhancer substrate. CFP was produced with a chemical process and its chemical composition was determined. The addition of CFP (1–8 g/l) increased the conversion of sugar to xanthan gum in comparison with the control medium, which did not contain additional supplements. The highest xanthan production (24.45 g/l) was found at the 6 g/l CFP containing control medium in 54 h. This value was 1.73 fold higher than that of control medium (14.12 g/l). Moreover, addition of CFP improved the composition of xanthan gum; the pyruvate content of xanthan was 3.86% (w/w), higher than that of the control (2.2%, w/w). The xanthan gum yield was also influenced by the type of organic nitrogen sources. As a conclusion, CFP was found to be a suitable substrate for xanthan gum production.

Xanthan gum production from acid hydrolyzed broomcorn stem as a sole carbon source by Xanthomonas campestris

Xanthan gum is an exo-polysaccharide industrially produced by fermentation using simple sugars. In this study, broomcorn stem was introduced as a low-cost- and widely available carbon source for xanthan gum fermentation. Broomcorn stem was hydrolyzed using sulphuric acid to liberate reducing sugar which was then used as a carbon source for biosynthesis of xanthan gum by Xanthomonas campesteris. Effects of hydrolysis time (15, 30, 45 and 60 min), sulphuric acid concentration (2, 4, 6 and 8% v/v) and solid loading (3, 4, 5 and 6% w/v) on the yield of reducing sugar and consequent xanthan production were investigated. Maximum reducing sugar yield (55.2%) and xanthan concentration (8.9 g/L) were obtained from hydrolysis of 4% (w/v) broomcorn stem with 6% (v/v) sulphuric acid for 45 min. The fermentation product was identified and confirmed as xanthan gum using Fourier transform infrared spectroscopy analysis. Thermogrvimetric analysis showed that thermal stability of synthesized xanthan gum was similar to those reported in previous studies. The molecular weight of the produced xanthan (2.23 × 10⁶ g/mol) was determined from the intrinsic viscosity. The pyruvate and acetyl contents in xanthan gum were 4.21 and 5.04%, respectively. The chemical composition results indicated that this biopolymer contained glucose, mannose and glucoronic acid with molecular ratio of 1.8:1.5:1.0. The kinetics of batch fermentation was also investigated. The kinetic parameters of the model were determined by fermentation results and evaluated. The results of this study are noteworthy for the sustainable xanthan gum production from low-value agricultural waste.

Exopolysaccharide from Pantoea sp. BCCS 001 GH isolated from nectarine fruit: production in submerged culture and preliminary physicochemical characterizations

Exopolysaccharide (EPS), as potential microbial base polysaccharide source, has plenty of applications due to its unique physicochemical structure. A Pantoea sp. BCCS 001 GH bacterium with the ability to produce a high amount of EPS was identified by 16S rRNA gene sequencing and biochemical tests. The synthesis of EPS by Pantoea sp. BCCS 001 GH was 13.50 g/L in 48 h when sucrose was used as substrate. The proposed protocol was desirably rapid for massive prodcution of EPS and showed the remarkable impact of sucrose and disodium hydrogen phosphate, peptone, Triton x-100 and 2% (v/v) inoculum size on the yields of EPS production. The EPS was mainly composed of glucose and galactose in a relative molar ration (glucose/galactose) of 85.18:14.82, respectively. The preliminary characterization showed the average molecular-weight of EPS is about 2.522 × 10⁶ Da. The microscopics morphology of polymer was formed irregularly shaped structures.

Engineering aspects of microbial exopolysaccharide production

Although the ability to secrete exopolysaccharides (EPS) is widespread among microorganisms, only a few bacterial (e.g. xanthan, levan, dextran) and fungal (e.g. pullulan) EPS have reached full commercialization. During the last years, other microbial EPS producers have been the subject of extensive research, including endophytes, extremophiles, microalgae and Cyanobacteria, as well as mixed microbial consortia. Those studies have demonstrated the great potential of such microbial systems to generate biopolymers with novel chemical structures and distinctive functional properties. In this work, an overview of the bioprocesses developed for EPS production by the wide diversity of reported microbial producers is presented, including their development and scale-up. Bottlenecks that currently hinder microbial EPS development are identified, along with future prospects for further advancement.

Technological Microbiology: Development and Applications

Over thousands of years, modernization could be predicted for the use of microorganisms in the production of foods and beverages. However, the current accelerated pace of new food production is due to the rapid incorporation of biotechnological techniques that allow the rapid identification of new molecules and microorganisms or even the genetic improvement of known species. At no other time in history have microorganisms been so present in areas such as agriculture and medicine, except as recognized villains. Currently, however, beneficial microorganisms such as plant growth promoters and phytopathogen controllers are required by various agricultural crops, and many species are being used as biofactories of important pharmacological molecules. The use of biofactories does not end there: microorganisms have been explored for the synthesis of diverse chemicals, fuel molecules, and industrial polymers, and strains environmentally important due to their biodecomposing or biosorption capacity have gained interest in research laboratories and in industrial activities. We call this new microbiology Technological Microbiology, and we believe that complex techniques, such as heterologous expression and metabolic engineering, can be increasingly incorporated into this applied science, allowing the generation of new and improved products and services.

Bioconversion of Welan Gum from Kitchen Waste by a Two-Step Enzymatic Hydrolysis Pretreatment

Kitchen waste (KW) is a worldwide issue, which can lead to environment pollution. Nevertheless, it is also a low-cost and sustainable resource for bio-production. Meanwhile, welan gum (WG) is one kind of the most important exopolysaccharide but with high material cost. The aim of this study was to adopt two-step enzymatic hydrolysis to improve the release and recovery of both sugar and protein in KW for subsequent WG production. As the results, the recovery rates of sugar and protein reached 81.07 and 77.38%, which were both satisfactory. After the conditions optimized in flasks, the welan fermentation was conducted in a 5-L fermentor, and the WG yield, utilization rates of reducing sugar and KDN, respectively, reached 5.57 g L^-1, 94.25% and 61.96%. Moreover, the kinetic analyses demonstrated that the WG fermentation in KWH was a partly growth-associated process. The KW was successfully treated by fermentation for the bioconversion to WG.

Effect of pretreatment on the enzymatic hydrolysis of kitchen waste for xanthan production

The study was carried out to gain insight into the effect of pretreatment on enzymatic hydrolysis of kitchen waste (KW) for xanthan fermentation. Herein, various pretreatments were applied and it was found that chemical pretreatment had positive effect on the following enzymatic or overall hydrolysis process. The highest reducing sugar concentration was obtained as 51.87g/L from 2% HCl (90°C) pretreated sample, while the Kjeldahl nitrogen (KDN) concentration was 7.79g/L. Kinetic study showed that first order kinetic model was suitable to describe the enzymatic hydrolysis process. The obtained kitchen waste hydrolysate (KWH) was successfully applied for xanthan fermentation. Xanthan concentration reached 4.09-6.46g/L when KWH with 2% HCl (90°C) pretreatment was applied as medium. In comparison, a xanthan concentration of 3.25-5.57g/L was obtained from KWH without pretreatment. Therefore, pretreatment of KW using diluted acid is favorable for the overall hydrolysis process and effective for xanthan fermentation.