Polydopamine-incorporated dextran hydrogel drug carrier with tailorable structure for wound healing

Synthesis and Characterization of Slow-Release Fertilizer Hydrogel Based on Hydroxy Propyl Methyl Cellulose, Polyvinyl Alcohol, Glycerol and Blended Paper

In this study, biodegradable slow-release fertilizer (SRF) hydrogels were synthesized from hydroxyl propyl methyl cellulose (HPMC), polyvinyl alcohol (PVA), glycerol and urea (SRF1) and HPMC, PVA, glycerol, urea and blended paper (SRF2). The fertilizer hydrogels were characterized by SEM, XRD and FTIR. The swelling capacity of the hydrogels in both distilled and tap water as well as their water retention capacity in sandy soil were evaluated. The hydrogels had good swelling capacity with maximum swelling ratio of 17.2 g/g and 15.6 g/g for SRF1 and SRF2 in distilled, and 14.4 g/g and 15.2 g/g in tap water, respectively. The water retention capacity of the hydrogels in sandy soil exhibited higher water retention when compared with soil without the (SRFs). The soil with the hydrogels was found to have higher water retention than the soil without the hydrogels. The slow-release profile of the hydrogels was also evaluated. The result suggested that the prepared fertilizer hydrogels has a good controlled release capacity. The blended paper component in SRF2 was observed to aid effective release of urea, with about 87.01% release in soil at 44 days compared to the pure urea which was about 97% release within 4 days. The addition of blended paper as a second layer matrix was found to help improve the release properties of the fertilizer. The swelling kinetic of the hydrogel followed Schott's second order model. The release kinetics of urea in water was best described by Kormeye Peppas, suggesting urea release to be by diffusion via the pores and channels of the SRF, which can be controlled by changing the swelling of the SRF. However, the release mechanism in soil is best described by first order kinetic model, suggesting that the release rate in soil is depended on concentration and probably on diffusion rate via the pores and channels of the SRF.

Polysaccharide-based nanomedicines for cancer immunotherapy: A review

Cancer immunotherapy is an effective antitumor approach through activating immune systems to eradicate tumors by immunotherapeutics. However, direct administration of "naked" immunotherapeutic agents (such as nucleic acids, cytokines, adjuvants or antigens without delivery vehicles) often results in: (1) an unsatisfactory efficacy due to suboptimal pharmacokinetics; (2) strong toxic and side effects due to low targeting (or off-target) efficiency. To overcome these shortcomings, a series of polysaccharide-based nanoparticles have been developed to carry immunotherapeutics to enhance antitumor immune responses with reduced toxicity and side effects. Polysaccharides are a family of natural polymers that hold unique physicochemical and biological properties, as they could interact with immune system to stimulate an enhanced immune response. Their structures offer versatility in synthesizing multifunctional nanocomposites, which could be chemically modified to achieve high stability and bioavailability for delivering therapeutics into tumor tissues. This review aims to highlight recent advances in polysaccharide-based nanomedicines for cancer immunotherapy and propose new perspectives on the use of polysaccharide-based immunotherapeutics.

Controllable Release of Povidone-Iodine from Networked Pectin@Carboxymethyl Pullulan Hydrogel

Povidone-iodine (PI) is a common antiseptic reagent which is used for skin infections and wound healing. The control release of PI is quite important to heal the deep and intense wounds. Herein, the preparation of biodegradable pectin@carboxymethyl pullulan (Pe@CMP) hydrogel was carried out and applied for controllable release of PI. CMP was synthesized by interaction of monochloroacetic acid with pullulan at different ratios. The Pe@CMP hydrogel was then prepared by crosslinking of pectin with CMP in presence of glutaraldehyde as cross linker. After carboxymethylation, COOH contents were enlarged to be 24.2-51.2 mmol/kg and degree of substitution was 0.44-0.93. The rheological properties of Pe@CMP hydrogel were enlarged by increment of pectin ratio. Swelling ratio in water (16.0-18.0%) was higher than that of artificial sweat (11.7-13.2%). Pe@CMP hydrogel containing 20% pectin, exhibited the lowest release and 57.7% from PI was released within 360 min. The biological activity of the released PI was monitored to be highly efficient. The kinetic of release was fitted well to the first ordered reaction and Higuchi models. The mechanism of release was explained by the swelling of hydrogel. The networked structure of hydrogel was opened by swelling and PI was released from the outer pores followed by inner pores, achieving the controllable release.

Handheld bioprinting strategies for in situ wound dressing

Handheld bioprinting has recently attracted considerable attention as a technology to deliver biomaterials and/or cells to injury sites by using freeform, user-instructed deposition approaches, specifically targeted towards in situ wound dressing and healing. In this review, we present a concise introduction of handheld bioprinting, and a thorough discussion on design and manufacture of handheld bioprinters and choice over bioinks. Finally, the advantages, challenges, and prospective of the said technologies are elaborated. It is believed that handheld bioprinting will play an essential role in the field of in situ wound healing mainly due to its excellent portability, user-friendliness, cost-effectiveness, and amenability to various wound needs.

Facile preparation of chitosan-dopamine-inulin aldehyde hydrogel for drug delivery application

Chitosan-based hydrogels are a suitable and versatile system for the design of localized and controlled drug delivery systems. In the current study, a hydrogel based on chitosan (CS), Dopamine (DA), and Inulin aldehyde (IA) was fabricated without the further use of catalyst or initiators. The effect of the IA contents as a crosslinking agent on the properties of the prepared hydrogel was studied. The crosslinking reaction between CS and IA was verified by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Various characteristics of the CS/DA/IA hydrogels were further assessed utilizing swelling experiment, in vitro drug release, in vitro cytotoxicity assay. The drug-loaded hydrogels represented the sustained release of Indomethacin according to the in vitro drug release test in acidic (pH = 4), basic (pH = 10) medium as well as physiological condition (pH = 7). Finally, the CS/DA/IA hydrogels exhibited appropriate cytocompatibility against the L-929 fibroblast cell line according to the direct contact MTT assay.

ε‑Polylysine-stabilized agarose/polydopamine hydrogel dressings with robust photothermal property for wound healing

Polydopamine (PDA) is emerging as an attractive photothermal agent due to its good photothermal performance and excellent biocompatibility. However, without chemical modification, PDA is normally unstable and usually leached out from the constructed biomaterials, realistically limiting its application space. Here, we constructed a new hydrogel dressing with robust and stable photothermal performance by introduction of ε-Polylysine (ε-PL) into agarose/PDA matrix to efficiently lock PDA. By optimizing PDA/ε-PL rational dose in agarose network structure, a hybrid agarose/PDA/ε-PL hydrogel (ADPH) with stable photothermal functionality and desirable physicochemical properties could be achieved. ADPH possessed satisfactory microbicidal efficacy in vivo, which enabled the bacteria-infected skin wound to be cured quickly by successful suppressing inflammation, accelerating collagen deposition and promoting angiogenesis in a bacterial-infected wound model. Collectively, this study illustrates a simple, convenient but powerful strategy to design functionally stable ADPH dressing for treating dermal wounds, which could open vistas in clinical wound management.

Lightwave-reinforced stem cells with enhanced wound healing efficacy

Comprehensive research has led to significant preclinical outcomes in modified human adipose-derived mesenchymal stem cells (hADSCs). Photobiomodulation (PBM), a technique to enhance the cellular capacity of stem cells, has attracted considerable attention owing to its effectiveness and safety. Here, we suggest a red organic light-emitting diode (OLED)-based PBM strategy to augment the therapeutic efficacy of hADSCs. In vitro assessments revealed that hADSCs basked in red OLED light exhibited enhanced angiogenesis, cell adhesion, and migration compared to naïve hADSCs. We demonstrated that the enhancement of cellular capacity was due to an increased level of intracellular reactive oxygen species. Furthermore, accelerated healing and regulated inflammatory response was observed in mice transplanted with red light-basked hADSCs. Overall, our findings suggest that OLED-based PBM may be an easily accessible and attractive approach for tissue regeneration that can be applied to various clinical stem cell therapies.