The role of nitrogen-donor ligands in the palladium-catalyzed polyketones synthesis

The Effect of Counterion/Ligand Interplay on the Activity and Stereoselectivity of Palladium(II)–Diimine Catalysts for CO/p-Methylstyrene Copolymerization

The catalytic activity and stereoselectivity of complexes [Pd(eta(1),eta(2)-C(8)H(12)OMe)(Ar--N==C(R')--C(R')==N--Ar)]X in the copolymerization of CO and p-methylstyrene have been correlated with their interionic structure in solution and in the solid state, as determined by (19)F,(1)H-HOESY NMR spectroscopy and X-ray diffraction studies, respectively. The highest productivity is obtained with unhindered diimine ligands bearing electron-donating substituents and with the least coordinating counterion. Copolymers with a microstructure ranging from atactic to predominantly isotactic are obtained. The degree of isotacticity increases as the steric hindrance in the apical positions and the coordinating ability of the counterion increase. The counterion is located close to the diimine in both solution and the solid state but it moves toward the palladium as the steric hindrance in the apical positions decreases. When the latter is small the counterion competes with the substrate for apical coordination, and consequently it affects the productivity. In the case of ortho-dimethyl-substituted ligands the counterion is confined in the back, above the N==C(R')--C(R')==N moiety, and does not affect the productivity. However, it contributes to increasing the stereoregularity of the copolymer by making the aryl moieties more rigid. With R'=Me and Ar=o-Me(2)C(6)H(3) an ll of 81 % and 72 % was obtained with X(-)=CF(3)SO(3) (-) or BArF(-), respectively. The isotacticity of the copolymers produced by ortho-monosubstituted catalysts depends greatly on the counterion and ranges from 30 % to 59 % with X(-)=BArF(-) and X(-)=CF(3)SO(3) (-), respectively, with Ar=o-EtC(6)H(4) and R'=Me. Based on the interionic structural results, this effect can be explained by a greater reduction of the copolymerization rate of C(s)-symmetric isomers with respect to their C(2)-symmetric counterparts.

Structurally characterized intermediates in the stepwise insertion of CO–ethylene or CO–methyl acrylate into the metal–carbon bond of Pd(ii) complexes stabilized by (phosphinomethyl)oxazoline ligands

The initial CO-ethylene or CO-methyl acrylate insertion steps into the Pd-Me bond of methylpalladium(II) complexes with (phosphinomethyl)oxazoline ligands, leading to metallacycles, have been fully characterized, including by X-ray diffraction.

Phosphinito- and phosphonito-oxazoline Pd(ii) complexes as CO/ethylene insertion intermediates: synthesis and structural characterization

The phosphinito-oxazoline ligand 4,4-dimethyl-2-[methoxy(diphenylphosphine)]-4,5-dihydrooxazole (2a) and the phosphonite-oxazoline ligand 4,4-dimethyl-2-[methoxy(6H-dibenz[c,e][1,2]oxaphosphorin)]-4,5-dihydrooxazole (8a) were prepared by deprotonation of (4,5-dihydro-4,4-dimethyloxazol-2-yl)methanol (1a) and reaction with the corresponding P-Cl function, similar to the ligands 2b (4,4-dimethyl-2-[1-oxy(diphenylphosphine)-1-methylethyl]-4,5-dihydrooxazole) and 8b (4,4-dimethyl-2-[1-oxy(6H-dibenz[c,e][1,2]oxaphosphorin)-1-methylethyl]-4,5-dihydrooxazole) reported previously. These ligands react with [PdClX(COD)] to give complexes of the type [PdClX(P,N)] (3a P,N = 2a, X = Cl; 4a P,N = 2a, X = Me; 4b P,N = 2b , X = Me; 9a P,N = 8a, X = Cl; 9b P,N = 8b, X = Cl; 10a P,N = 8a, X = Me; 10b P,N = 8b, X = Me). Complexes 4a,b and 10a,b reacted with AgCF(3)SO(3) to yield [PdMe(P,N)OSO(2)CF(3)] 5a,b and 11a,b, respectively. From the stepwise insertion reaction of CO and ethylene into the Pd-C bond of 5a and 11a,b, the alkyl ketone chelate complexes [Pd{CH(2)CH(2)C(O)Me}(P,N)]CF(3)SO(3) 7a and 14a,b respectively, have been isolated and spectroscopically characterized. Complexes 3a.CH(2)Cl(2), 5a, 9b, 10a,b, [PdMe(H(2)O)(P,N)]CF(3)SO(3) 12b, (P,N = 8b) and 14a,b have also been characterized by X-ray crystallography and the structures of 14a,b represent still rare examples of structurally characterized CO/ethylene coupling products.

Insertion reactions of alkynes and organic isocyanides into the palladium–carbon bond of dimetallic Fe–Pd alkoxysilyl complexes

Insertion of MeO(2)C-C[triple bond]C-CO(2)Me (DMAD) into the Pd-C bond of the heterodimetallic complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d(dmba-C)] (2) (dppm = Ph(2)PCH(2)PPh(2), dmba-C = metallated dimethylbenzylamine) and [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d(8-mq-C,N)] (3) (8-mq-C,N = cyclometallated 8-methylquinoline) yielded the sigma-alkenyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (7) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)[double bond, length as m-dash]C(CO(2)Me)(CH(2)C(9)H(6)N)}] (8), respectively. The latter afforded the adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(CH(2)C(9)H(6)N)}(CNBu(t))] (9) upon reaction with 1 equiv. of Bu(t)NC. The heterodinuclear sigma-butadienyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph=C(Ph)C(CO(2)Me)=(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (11) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph)=C(CO(2)Et)C(Ph)=C(CO(2)Et)(CH(2)C(9)H(6)N)}] (13) have been obtained by reaction of the metallate K[Fe{Si(OMe)(3)}(CO)(3)(dppm-P)] (dppm = Ph(2)PCH(2)PPh(2)) with [P[upper bond 1 start]dCl{C(Ph)=C(Ph)C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)N[upper bond 1 end]Me(2))}] or [P[upper bond 1 start]dCl{C(Ph)=C(CO(2)Et)C(Ph)=(CO(2)Et)}(CH(2)C(9)H(6)N[upper bond 1 end])], respectively. Monoinsertion of various organic isocyanides RNC into the Pd-C bond of 2 and 3 afforded the corresponding heterometallic iminoacyl complexes. In the case of complexes [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end][upper bond 1 start]d{C=(NR)(CH(2)C(9)H(6)N[upper bond 1 end])}] (15a R = Ph, 15b R = xylyl), a static six-membered C,N chelate is formed at the Pd centre, in contrast to the situation in [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=NR)(o-C(6)H(4)CH(2)NMe(2))}] (14a R = o-anisyl, 14b R = 2,6-xylyl) where formation of a mu-eta(2)-Si-O bridge is preferred over NMe(2) coordination. The outcome of the reaction of the dimetallic alkyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe] with RNC depends both on the stoichiometry and the electronic donor properties of the isocyanide employed for the migratory insertion process. In the case of o-anisylisocyanide, the iminoacyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=N-o-anisyl)Me}] (16) results from the reaction in a 1 : 1 ratio. Addition of three equiv. of o-anisylisocyanide affords the tris(insertion) product [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}] (18). After addition of a fourth equivalent of o-anisylNC, exclusive formation of the isocyanide adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}(CN-o-anisyl)] (19) was spectroscopically evidenced. In the complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-C(6)H(4)COCH(2))](2)Me}] (20), the sigma-bound diazabutadienyl unit is part of a 12-membered organic macrocyle which results from bis(insertion) of 1,2-bis(2-isocyanophenoxy)ethane into the Pd-Me bond of the precursor complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe]. In contrast, addition of two equivalents of tert-butylisocyanide to a solution of the latter afforded [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]Fe(mu-dppm)P[upper bond 1 end]d{C(=NBu(t))Me}(CNBu(t))] (21) in which both a terminal and an inserted isocyanide ligand are coordinated to the Pd centre. In all cases, there was no evidence for competing CO substitution at the Fe(CO)(3) fragment by RNC. The molecular structures of the insertion products 8 x CH(2)Cl(2) and 16 x CH(2)Cl(2) have been determined by X-ray diffraction.