A toolbox of building blocks, linkers and crystallisation methods used to generate single-chain magnets

Dual switchable molecular tweezers incorporating anisotropic MnIII-salphen complexes

An alternative strategy for the synthesis of terpyridine based switchable molecular tweezers has been developed to incorporate anisotropic Mn(iii)-salphen complexes. The free ligand was synthesized using a building block strategy based on Sonogashira coupling reactions and was then selectively metalated with manganese in a last step. The conformation of the tweezers was switched from an open 'W' shaped form to a closed 'U' form by Zn(ii) coordination to the terpyridine unit bringing the two Mn-salphen moieties in close spatial proximity as confirmed by X-ray crystallography. An alternate switching mechanism was observed by the intercalation of a bridging cyanide ligand between the two Mn-salphen moieties that resulted in the closing of the tweezers. These dual stimuli are attractive for achieving multiple controls of the mechanical motion of the tweezers. A crystallographic structure of unexpected partially oxidized closed tweezers was also obtained. One of the two Mn-salphen moieties underwent a ligand-centered oxidation of an imino to an amido group allowing an intramolecular Mn-Oamide-Mn linkage. The magnetic properties of the manganese(iii) dimers were investigated to evaluate the magnetic exchange interaction and analyze the single molecule magnet behavior.

Two azido-bridged [2×2] cobalt(ii) grids featuring single-molecule magnet behaviour

Two Co(ii) [2 × 2] grid-like clusters containing both pyridazine and azido bridges were reported to exhibit overall intramolecular ferromagnetic coupling and field-induced single-molecule magnet behavior with the effective energy barriers up to 56 K.

Controlling Through-Space and Through-Bond Exchange Pathways in Bis-Cobaltocenes for Molecular Spintronics

Pinching molecules via chemical strain suggests intuitive consequences, such as compression at the pinched site and clothespin‐like opening of other parts of the structure. If this opening affects two spin centers, it should result in reduced communication between them. We show that for naphthalene‐bridged biscobaltocenes with competing through‐space and through‐bond pathways, the consequences of pinching are far less intuitive: despite the known dominance of through‐space interactions, the bridge plays a much larger role for exchange spin coupling than previously assumed. Based on a combination of chemical synthesis, structural, magnetic, and redox characterization, and a newly developed theoretical pathway analysis, we can suggest a comprehensive explanation for this non‐intuitive behavior. These results are of interest for molecular spintronics, as naphthalene‐linked cobaltocenes can form wires on surfaces for potential spin‐only information transfer.

Tuning of the exchange interaction and the Curie temperature by mixed crystal formation of the bridging anionic ligands

Mixed crystals with the composition [Co(NCS)x(NCSe)2-x(pyridine)2]n were prepared from solution and by annealing of Co(NCS)x(NCSe)2-x(pyridine)4. With increasing selenocyanate content, an increase of the magnetic exchange constant and of the critical temperature (Curie temperature) is observed, which offers a rational route to control these parameters in detail, without changing the metal cations.

Single-chain magnets assembled in cobalt(ii) metal–organic frameworks

This feature article discusses the advantages, progress and prospects of constructing single-chain magnets in metal–organic frameworks.

Lanthanide chains containing the naphthalenyl nitronyl nitroxide radical

Three lanthanide(iii)–nitronil nitroxide chains containing polyaromatic naphthalenyl substituents have been synthesized and characterized. The dysprosium and terbium chains show single-chain magnet behavior.

Improved single-chain-magnet behavior in a biradical-based nitronyl nitroxide-Cu–Dy chain

The first example of nitronyl nitroxide biradical bridged 3d–4f complex exhibiting single-chain magnet behavior.

Two 1D carboxylate-bridged magnets displaying solvent-dependent canted antiferromagnetic ordering

Two 1D carboxylate-bridged chain complexes can be converted irreversibly from 1 to 2 and exhibit terminal solvent-dependent canted antiferromagnetic ordering with T_C = 38 K.

Field-induced slow magnetic relaxation in pseudooctahedral cobalt(ii) complexes with positive axial and large rhombic anisotropy

The preparation, X-ray crystal structure, spectroscopic and variable-temperature dc and ac magnetic properties of two six-coordinate cobalt(ii) complexes of formula [Co(bim)₄(tcm)₂] (1) and [Co(bmim)₄(tcm)₂] (2) are reported.

Field Induced Slow Magnetic Relaxation in a Non Kramers Tb(III) Based Single Chain Magnet

Herein, we report a novel Tb(III) single chain magnet with the chemical formulae [Tb(μ-OH2)(phen)(μ-OH)(nb)2]n by using 4-nitrobenzoic acid (Hnb) and 1,10-phenanthroline (phen) as ligand system. The single-crystal X-ray diffraction reveals that 4-nitrobenzoic acid acts as a monodentate ligand, water and hydroxyl ions are the bridging ligand and the phen serves as a bidentate chelating ligand. The static magnetic susceptibility measurement (from 2 K to 300 K) shows ferromagnetic interaction at very low temperature (below 6 K). The alternating current (AC) susceptibility data of the complex show temperature and frequency dependence under an applied 2000 Oe DC (direct current) field. The phen moiety behaves as an antenna and enables the complex to show the green light fluorescence emission by absorption-energy transfer-emission mechanism. To calculate the exchange interaction, broken symmetry density functional theory (BS-DFT) calculations have been performed on a model compound which also reveals weak ferromagnetic interaction. Ab initio calculations reveals the anisotropic nature (gz = 15.8, gy, gy = 0) of the metal centre and the quasi doublet nature of ground state with small energy gap and that is well separated from the next excited energy state.

Structures, Thermodynamic Relations, and Magnetism of Stable and Metastable Ni(NCS)2 Coordination Polymers

Reaction of Ni(NCS)₂ with 4-aminopyridine in different solvents leads to the formation of compounds with the compositions Ni(NCS)₂(4-aminopyridine)₄ (1), Ni(NCS)₂(4-aminopyridine)₂(H₂O)₂ (2), [Ni(NCS)₂(4-aminopyridine)₃(MeCN)]·MeCN (3), and [Ni(NCS)₂(4-aminopyridine)₂] _n (5-LT). Compounds 1, 2, and 3 form discrete complexes, with octahedral metal coordination. In 5-LT the Ni cations are linked by single thiocyanate anions into chains, which are further connected into layers by half of the 4-aminopyridine coligands. Upon heating, 1 transforms into an isomer of 5-LT with a 1D structure (5-HT), that on further heating forms a more condensed chain compound [Ni(NCS)₂(4-aminopyridine)] _n (6) that shows a very unusual chain topology. If 3 is heated, a further compound with the composition Ni(NCS)₂(4-aminopyridine)₃ (4) is formed, which presumably is a dimer and which on further heating transforms into 6 via 5-HT as intermediate. Further investigations reveal that 5-LT and 5-HT are related by enantiotropism, with 5-LT being the thermodynamic stable form at room-temperature. Magnetic and specific heat measurements reveal ferromagnetic exchange through thiocyanate bridges and magnetic ordering due to antiferromagnetic interchain interactions at 5.30(5) K and 8.2(2) K for 5-LT and 6, respectively. Consecutive metamagnetic transitions in the spin ladder compound 6 are due to dipolar interchain interactions. A convenient formula for susceptibility of the ferromagnetic Heisenberg chain of isotropic spins S = 1 is proposed, based on numerical DMRG calculations, and used to determine exchange constants.

Cd(II) and Zn(II) thiocyanate coordination compounds with 3-ethylpyridine: synthesis, crystal structures and properties

Reaction of Cd(NCS)2 and Zn(NCS)2 with 3-ethylpyridine leads to the formation of compounds of compositions M(NCS)2(3-ethylpyridine)4 (M=Cd, 1-Cd; Zn, 1-Zn) and M(NCS)2(3-ethylpyridine)2 (M=Cd, 2-Cd; Zn, 2-Zn). 1-Cd and 1-Zn are isotypic and form discrete complexes in which the metal cations are octahedrally coordinated by two trans-coordinating N-bonded thiocyanate anions and four 3-ethylpyridine co-ligands. In 2-Cd the cations are also octahedrally coordinated but linked into chains by pairs of μ-1,3-bridging anionic ligands. 2-Zn is built up of discrete complexes, in which the Zn cation is tetrahedrally coordinated by two N-bonded thiocyanate anions and two 3-ethylpyridine co-ligands. Compounds 1-Cd, 2-Cd and 2-Zn can be prepared in a pure state, whereas 1-Zn is unstable and transforms on storage into 2-Zn. If 1-Cd and 1-Zn are heated, a transformation into 2-Cd, respectively 2-Zn is observed. Luminescence measurements reveal that 1-Cd, 2-Cd and 2-Zn emit light in the blue spectral range with maxima at, respectively, 21724, 21654 and 22055 cm−1, assigned to ligand-based luminescence.

Spin crossover in discrete polynuclear iron(ii) complexes

A comprehensive review of 127 dinuclear to octanuclear complexes, mostly 2012-present, reveals key design features and future directions for spin crossover active supramolecular assemblies.

A belt-like one-dimensional Dy chain exhibiting slow magnetic relaxation behavior

A belt-like Dy chain compound was synthesized, which exhibited slow magnetic relaxation behavior and clear hysteresis loops below 0.6 K.

Hybrid organic–inorganic connectivity of NdIII(pyrazine-N,N′-dioxide)[CoIII(CN)6]3− coordination chains for creating near-infrared emissive Nd(iii) showing field-induced slow magnetic relaxation

Organic pzdo and inorganic hexacyanidocobaltate(iii) support the formation of Nd(iii) complexes showing NIR fluorescence and magnetic anisotropy.

Self-assembly of a mixed-valence FeII–FeIII tetranuclear star

A self-assembled mixed-valence Fe^II–Fe^III tetranuclear star is reported that shows ferromagnetic coupling, field-induced single molecule magnetism and strong magnetic anisotropy at the peripheral Fe^II centres.

Random mixed-metal Co1−xNix single-chain magnets with simultaneous azide, carboxylate and tetrazolate bridges

A series of MOFs based on random ferromagnetic Co_1−xNi_x chains with simultaneous azide, carboxylate and tetrazolate bridges show metamagnetism and slow magnetic relaxation with complicated composition dependence and synergistic effects on single-chain slow dynamics.

Single-crystal-to-single-crystal (SCSC) transformation and dissolution–recrystallization structural transformation (DRST) among three new copper(ii) coordination polymers

Three new copper(ii) complexes with single-crystal-to-single-crystal (SCSC) transformation and dissolution–recrystallization structural transformation (DRST) have been synthesized and fully characterized.

Two hybrid lanthanide complexes exhibiting a large magnetocaloric effect and slow magnetic relaxation

Two isostructural lanthanide (Ln) hybrid complexes co-bridged by organic oxalate and inorganic hypophosphite, [Ln(oxa)(H₂PO₂)(H₂O)₂] (oxa = oxalate; Ln = Gd (1), Dy (2)), were solvothermally prepared with the goal of elucidating the role of a hybrid framework in the generation of novel molecular magnetic materials. The title compounds feature a two dimensional (2D) hybrid layer. The Ln^III ions are octa-coordinated with distorted square antiprism geometry. The adjacent Ln^III ions are co-bridged by hypophosphite and one type of oxalate ligand to form 1D hybrid chains, which are further linked by a second type of oxalate ligand to generate the resulting 2D framework. Magnetic investigations reveal that compound 1 features a large magnetocaloric effect with -ΔS = 46.60 J kg^-1 K^-1 (134.39 mJ cm^-3 K^-1), due to the combined advantages of organic oxalate and inorganic hypophosphite ligands, while compound 2 displays slow magnetic relaxation.

Proof of Principle: Immobilisation of Robust CuII3 TbIII -Macrocycles on Small, Suitably Pre-functionalised Gold Nanoparticles

In a proof-of-principle study, a soluble macrocyclic single-molecule magnet (SMM) containing a Cu^II₃ Tb^III magnetic core was covalently grafted onto small gold nanoparticles pre-functionalised with carboxylate-terminated tethers. A modified microemulsion method allowed production of the small and monodisperse nanoparticles (approximately 3.5 nm in diameter) for the chemisorption of a large amount of intact macrocyclic complexes in the hybrid system.

An Ising iron(ii) chain exhibits a large finite-size energy barrier and "hard" magnetic behaviour

One-dimensional spin chains featuring strong axial anisotropic magnetism are promising candidates for isolatable and miniatured information storage materials, the so-called single-chain magnets (SCMs). Here we show a mixed azido/carboxylato bridged metamagnetic iron(ii) chain [Fe(N₃)₂(4-mpc)]_n (4-mpc = N-methylpyridinium-4-carboxylate) with a large energy barrier of 150 K, a large remnant magnetization (1.55Nβ) and coercivity (1.7 T at 2 K) for homo-spin SCMs. Heat capacity and Mössbauer spectroscopy studies corroborate the intrinsic nature of SCM behavior regardless of weak interchain magnetic interactions, which lead to the coexistence of metamagnetism but not long-range magnetic ordering. Moreover, detailed magnetic investigations indicate that the system is not only within the "Ising limit" but also in the "finite-size" regime.

An unusual zig-zag 1D copper(ii) coordination polymer displaying magnetic phase transition

A new Cu(ii)-based 1D chain was prepared and its magnetic behaviour was investigated, which indicated a magnetic phase transition below 25 K as well as long-range magnetic ordering.