Ratiometric fluorescence sensing of metal-organic frameworks: Tactics and perspectives

A ratiometric fluorescent probe based on a dual-ligand lanthanide metal–organic framework (MOF) for sensitive detection of aluminium and fluoride ions in river and tap water

A dual-emission fluorescent probe towards Al3+ and F− using a Ln-MOF material Eu-BDC-NH2/TDA is employed with exceptional sensitivity, high selectivity, low LOD, excellent anti-interference characteristics and direct visual observation.

Construction of metallo-triangles with cis-TPE motifs and fluorescence properties

Two metallo-triangles, SA and SB, with cis-TPE motifs were constructed, and their fluorescence properties were explored. Compared with the dilute solution, both triangles SA and SB exhibited significant AIE behavior in the aggregated states. Moreover, the shorter version SA showed higher quantum yields than SB in the aggregated states.

A sensitive ratiometric fluorescent sensor based on carbon dots and CdTe quantum dots for visual detection of biogenic amines in food samples

A novel dual-emission ratiometric fluorescent sensor for biogenic amines (BAs) was prepared by simple mixing blue fluorescent carbon dots (CDs) and yellow fluorescent CdTe quantum dots (CdTe QDs). Based on different sensitive properties of pH, CdTe QDs and CDs were used as the response signal and internal reference signal, respectively. The developed ratiometric fluorescent sensor achieved quantitative analysis of eight kinds of BAs with rapid response (30 s) and low limits of detection (1.259-5.428 μM). Furthermore, color-tunable fluorescent test strips were constructed by easily assembling CDs and CdTe QDs onto filter paper. The obtained smart label showed a distinguishable fluorescent color variation from blue to green during the corruption of shrimp samples. The smart label with advantages of convenience and rapidness provided a method for visually monitoring the freshness of food samples.

Recent Progress in Aptamer-Functionalized Metal-Organic Frameworks-Based Optical and Electrochemical Sensors for Detection of Mycotoxins

Mycotoxin contamination in foodstuffs and agricultural products has posed a serious hazard to human health and raised international concern. The progress of cost-effective, facile, rapid and reliable analytical tools for mycotoxin determination is in urgent need. In this regard, the potential utility of metal-organic frameworks (MOFs) as a class of crystalline porous materials has sparked immense attention due to their large specific surface area, adjustable pore size, nanoscale framework structure and good chemical stability. The amalgamation of MOFs with high-affinity aptamers has resulted in the progress of advanced aptasensing methods for clinical and food/water safety diagnosis. Aptamers have many advantages over classical approaches as exceptional molecular recognition constituents for versatile bioassays tools. The excellent sensitivity and selectivity of the MOF-aptamer biocomposite nominate them as efficient lab-on-chip tools for portable, label-free, cost-effective and real-time screening of mycotoxins. Current breakthroughs in the concept, progress and biosensing applications of aptamer functionalized MOFs-derived electrochemical and optical sensors for mycotoxins have been discussed in this study. We first highlighted an overview part, which provides some insights into the functionalization mechanisms of MOFs with aptamers, offering a foundation to create MOFs-based aptasensors. Then, we discuss various strategies to design high-performance MOFs-based aptamer scaffolds, which serve as either signal nanoprobe carriers or signal nanoprobes and their applications. We perceived that applications of optical aptamers are in their infancy in comparison with electrochemical MOFs-derived aptasensors. Finally, current challenges and prospective trends of MOFs-aptamer sensors are discussed.

Recent Advances in Construction and Application of Metal-Nanozymes in Pharmaceutical Analysis

Nanozymes, made of emerging nanomaterials, have similar activity to natural enzyme and exhibit promising applications in in the fields of environment, biology and medicine, and food safety science. In recent years, with the deep finding and research to nanozymes by researchers, its application in field of pharmaceutical analysis has emerged gradually, possessing great significance in drug safety evaluation and quality control. This review summarizes the construction of metal nanozymes, strategies to improve their performance and their application in pharmaceutical detection and analysis, especially in detection of target analytes consisting of small molecule medicine macromolecule, toxic and others, which proposes theoretical foundation for development of nanozymes in this field. At the same time, it also provides opportunities and challenges for the construction and application of new nanozymes.

Detection of Heavy Metal Ions by Ratiometric Photoelectric Sensor

In recent years, heavy metal pollution has become increasingly serious. Heavy metals exist in an environment mainly in the form of ions (heavy metal ions, HMs). They can contaminate food, water, soil, and the atmosphere, leading to serious harm to plants and animals. With high bioavailability and nonbiodegradability, HMs can accumulate through biomagnification. Consequently, heavy metal pollution has become the cause of many fatal diseases threatening human health and ecological environment. Therefore, the accurate detection of HMs is vital and necessary. In this paper, the harm and limit standards of heavy metals were systematically summarized and the common analysis methods were overviewed and compared. Specifically, the latest research progress of ratiometric photoelectric sensor, including optical and electrical sensor, were mainly described. The research status and advantages and disadvantages of a photoelectric sensor were summarized. Furthermore, the future directions were proposed, which provided the reference for the further research and application of the ratiometric photoelectric sensor.

Controllable synthesis of conjugated microporous polymer films for ultrasensitive detection of chemical warfare agents

Nerve agents, one of the most toxic chemical warfare agents, seriously threaten human life and public security. The high toxicity of nerve agents makes the development of fluorescence sensors with suitable limit of detection challenging. Here, we propose a sensor design based on a conjugated microporous polymer film for the detection of diethyl chlorophosphate, a substitute of Sarin, with low detection limit of 2.5 ppt. This is due to the synergy of the susceptible on-off effect of hybridization and de-hybridization of hybrid local and charge transfer (HLCT) materials and the microporous structure of CMP films facilitating the inward diffusion of DCP vapors, and the extended π-conjugated structure. This strategy provides a new idea for the future development of gas sensors. In addition, a portable sensor is successfully integrated based on TCzP-CMP films that enables wireless, remote, ultrasensitive, and real-time detection of DCP vapors.

Carbon dots@Cu metal-organic frameworks hybrids for ratiometric fluorescent determination of pesticide thiophanate-methyl

A dual-emission fluorescent (FL) probe was constructed by coordinating Cu²⁺ of copper metal-organic frameworks (Cu-MOFs) with - COO^- group of carbon dots (CDs) for pesticide thiophanate-methyl (TM) determination. TM was recognized by organic ligands (H₂BDC and H₂BDC-NH₂) of Cu-MOFs via π stacking. Due to the higher affinity of Cu²⁺ to TM than ligands and CDs, TM chelated with Cu²⁺ to form TM-Cu complex. Thus coordination of Cu-MOFs was damaged and the ligands were released resulting in the FL intensity increase of Cu-MOFs (F₄₃₀). And also CDs were released from CDs@Cu-MOFs hybrids and electron transfer from CDs to CuMOFs was inhibited, leading to the FL intensity increase of CDs (F₆₀₀). The FL intensity ratio (F₄₃₀/F₆₀₀) showed a good linear relationship with TM concentrations of 0.0307-0.769 μmol L^-1 with a limit of detection (LOD) of ~ 3.67 nmol L^-1. The probe was successfully applied to detect TM in spiked food samples with satisfactory recoveries of 93.1-113%. Additionally, visual detection of TM was achieved according to the fluorescence color variation from blue to carmine, indicating promising application of CDs@Cu-MOFs probe.

Materials for Chemical Sensing: A Comprehensive Review on the Recent Advances and Outlook Using Ionic Liquids, Metal–Organic Frameworks (MOFs), and MOF-Based Composites

The ability to measure and monitor the concentration of specific chemical and/or gaseous species (i.e., “analytes”) is the main requirement in many fields, including industrial processes, medical applications, and workplace safety management. As a consequence, several kinds of sensors have been developed in the modern era according to some practical guidelines that regard the characteristics of the active (sensing) materials on which the sensor devices are based. These characteristics include the cost-effectiveness of the materials’ manufacturing, the sensitivity to analytes, the material stability, and the possibility of exploiting them for low-cost and portable devices. Consequently, many gas sensors employ well-defined transduction methods, the most popular being the oxidation (or reduction) of the analyte in an electrochemical reactor, optical techniques, and chemiresistive responses to gas adsorption. In recent years, many of the efforts devoted to improving these methods have been directed towards the use of certain classes of specific materials. In particular, ionic liquids have been employed as electrolytes of exceptional properties for the preparation of amperometric gas sensors, while metal–organic frameworks (MOFs) are used as highly porous and reactive materials which can be employed, in pure form or as a component of MOF-based functional composites, as active materials of chemiresistive or optical sensors. Here, we report on the most recent developments relative to the use of these classes of materials in chemical sensing. We discuss the main features of these materials and the reasons why they are considered interesting in the field of chemical sensors. Subsequently, we review some of the technological and scientific results published in the span of the last six years that we consider among the most interesting and useful ones for expanding the awareness on future trends in chemical sensing. Finally, we discuss the prospects for the use of these materials and the factors involved in their possible use for new generations of sensor devices.

Synthesis of Metal–Organic Frameworks Quantum Dots Composites as Sensors for Endocrine-Disrupting Chemicals

Hazardous chemical compounds such as endocrine-disrupting chemicals (EDCs) are widespread and part of the materials we use daily. Among these compounds, bisphenol A (BPA) is the most common endocrine-disrupting chemical and is prevalent due to the chemical raw materials used to manufacture thermoplastic polymers, rigid foams, and industrial coatings. General exposure to endocrine-disrupting chemicals constitutes a serious health hazard, especially to reproductive systems, and can lead to transgenerational diseases in adults due to exposure to these chemicals over several years. Thus, it is necessary to develop sensors for early detection of endocrine-disrupting chemicals. In recent years, the use of metal–organic frameworks (MOFs) as sensors for EDCs has been explored due to their distinctive characteristics, such as wide surface area, outstanding chemical fastness, structural tuneability, gas storage, molecular separation, proton conductivity, and catalyst activity, among others which can be modified to sense hazardous environmental pollutants such as EDCs. In order to improve the versatility of MOFs as sensors, semiconductor quantum dots have been introduced into the MOF pores to form metal–organic frameworks/quantum dots composites. These composites possess a large optical absorption coefficient, low toxicity, direct bandgap, formidable sensing capacity, high resistance to change under light and tunable visual qualities by varying the size and compositions, which make them useful for applications as sensors for probing of dangerous and risky environmental contaminants such as EDCs and more. In this review, we explore various synthetic strategies of (MOFs), quantum dots (QDs), and metal–organic framework quantum dots composites (MOFs@QDs) as efficient compounds for the sensing of ecological pollutants, contaminants, and toxicants such as EDCs. We also summarize various compounds or materials used in the detection of BPA as well as the sensing ability and capability of MOFs, QDs, and MOFs@QDs composites that can be used as sensors for EDCs and BPA.

A europium metal-organic framework for dual Fe3+ ion and pH sensing

Metal–organic frameworks (MOFs) with ratiometric sensing properties are desirable for many applications due to their intrinsic self-calibration. We report the re-assessment of the sensing properties of a MOF, originally reported as containing europium(III) and 2-hydroxyterephtalic acid, and having fluorescent ratiometric iron(III) sensing properties. Synchrotron single-crystal X-ray diffraction and proton nuclear magnetic resonance (¹H NMR) spectroscopy revealed that the MOF is composed of 2-methoxyterephthalate, not 2-hydroxyterephthalate as originally reported. We found that the MOF exhibits a sensor turn-off response towards Fe³⁺ ion concentrations in the range 0.5–3.7 ppm (band 425 nm), and a turn-on response towards a decrease of pH from 5.4 to 3.0 (band 375 nm), both resulting from the addition of acidic Fe³⁺ salt solution to a MOF suspension. Thus, the ratiometric sensing properties and the originally proposed mechanism no longer apply; our work reveals a dynamic quenching mechanism for the fluorescence turn-off response due to the presence of Fe³⁺ ions, and a ligand protonation mechanism for the turn-on response to a decrease in pH. Our work highlights the importance of a thorough investigation of the structure of any newly synthesized MOF, and, in the case of potential sensors, their selectivity and any environmental effects on their sensing behavior.

Two Solvent-Induced In(III)-Based Metal-Organic Frameworks with Controllable Topology Performing High-Efficiency Separation of C2H2/CH4 and CO2/CH4

For pure acetylene manufacturing and natural gas purification, the development of porous materials displaying highly selective C₂H₂/CH₄ and CO₂/CH₄ separation is greatly important but remains a major challenge. In this work, a plausible strategy involving solvent-induced effects and using the flexibility of the ligand conformation to make two In(III) metal-organic frameworks (MOFs) is developed, showing topological diversity and different stability. The X-shaped tetracarboxylic ligand H₄TPTA ([1,1':3',1″-terphenyl]-4,4',4″,6'-tetracarboxylic acid) was selected to construct two new heteroid In MOFs, namely, {[CH₃NH₃][In(TPTA)]·2(NMF)} (MOF 1) and {[In₂(TPTA)(OH)₂]·2(H₂O)·(DMF)} (MOF 2). MOF 1 is a (4, 4)-connected net showing a pts topology with a large channel that is not conducive to fine gas separation. By contrast, with the reduction of SBU from uninucleated In to an {In-OH-In}_n chain, MOF 2 has a (4, 6)-connected net with the fsc topology with an ∼5 Å suitable micropore to confine matching small gas. The permanent porosity of MOF 2 leads to the preferential adsorption of C₂H₂ over CO₂ with superior C₂H₂/CH₄ (332.3) and CO₂/CH₄ (31.2) separation selectivities. Meanwhile, the cycling dynamic breakthrough experiments showed that the high-purity C₂H₂ (>99.8%) capture capacities of MOF 2 were >1.92 mmol g^-1 from a binary C₂H₂/CH₄ mixture, and its separation factor reached 10.

A ratiometric electrochemical strategy based on Fe (III) and Pt (IV) for immobilization-free detection of Escherichia coli

A new ratiometric electrochemical strategy for immobilization-free detection of Escherichia coli (E. coli) was constructed by using a capture DNA-polyaniline/copper ferrite nanoparticles/graphene oxide (cDNA-PANI/CuFe₂O₄/GO) composite as capture probes, which has a high specific surface area and good magnetic properties. Then trigger DNA/Au nanoparticles (tDNA/Au NPs) were used as signal amplification labels, and Pt (IV) and Fe (III) were chosen as the signal probes. In the presence of targets, the sandwich format among cDNA-PANI/CuFe₂O₄/GO, E. coli and auxiliary DNA (aDNA) was realized by using the aptamer recognition system. Then, the tDNA/Au binding could be anchored on the sandwich format due to the principle of base complementation between unpaired aDNA and tDNA. And the unbounded tDNA of tDNA/Au NPs could bind an amount of Pt (IV). After separation using a magnet, a handful of unbound Pt (IV) which remained in the supernatant reacted with a large number of Fe (III) ions, leading to a markedly increased I_Fe(III)/I_Pt(IV) value. Oppositely, the sandwich format could not appear in the absence of targets, and even the tDNA/Au could not be immobilized on it. So, the redox reaction between a large amount of Pt (IV) residue in the supernatant and Fe (III) was significantly successful, causing a low I_Fe(III)/I_Pt(IV) value. Under optimal conditions, we found that I_Fe(III)/I_Pt(IV) was linearly related to the logarithmic E. coli concentration with a low limit of detection (1.862 × 10³ cfu mL^-1). This devised ratiometric electrochemical method may develop into a powerful and effective means for the detection of E. coli in real samples, which may also be developed as a universal tool for another microorganism.

Ultra-sensitive detection of hydrogen peroxide and levofloxacin using a dual-functional fluorescent probe

Herein, a flower-shaped fluorescent probe was proposed for hydrogen peroxide (H₂O₂) and levofloxacin (LVF) sensing based on MoOx QDs@Co/Zn-MOFs with porous structure. Both MoOx QDs and Co/Zn-MOFs exhibited peroxidase-like properties, and the combination of them greatly aroused the synergistic catalytic capabilities between them. In o-Phenylenediamine (OPD)-H₂O₂ system, MoOx QDs@Co/Zn-MOFs efficiently catalyzed H₂O₂ to produce •OH and then oxidized OPD to its oxidation product (OxOPD). The OxOPD could not only emit blue fluorescence, but also inhibit the fluorescent intensity of MoOx QDs through fluorescence resonance energy transfer (FRET). Moreover, when introducing LVF into the system, the fluorescent intensities of MoOx QDs increased along with the aggregation of themselves while that of OxOPD remained unchanged, which was explained by the joint behavior of FRET and photo-induced electron transfer (PET) instead of the conventional aggregation-induced emission enhancement (AIEE). With these observation, the proposed probe was employed for H₂O₂ and LVF determination in biological samples with the limit of detection (LOD) of 32.60 pmol/L and 0.85 μmol/L, respectively, suggesting the method holds great promises for trace H₂O₂ and LVF monitoring in eco-environment.

Insights into the luminescent properties of poly(phenylene sulfide)–grafted metal–organic framework (Tb–MOF–PPS) via copolymerization

In this study, a novel poly(phenylene sulfide)-grafted metal-organic framework (Tb–MOF–PPS) was fabricated. Initially, 2,5-dichloroterephthalic acid and TbCl3·6H2O were used as raw materials to synthesize the dihalogenated MOF (Tb–MOF) through ultrasound irradiation and hydrothermal methods. Subsequently, Tb–MOF was added at different mole proportions (2.5, 5, 7.5, and 10%) for the copolymerization of PPS, and a serial of Tb–MOF–PPS composites were successfully obtained. Fourier transform infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy proved that the Tb–MOF was covalently connected to PPS. The introduction of the Tb–MOF had no evident influence on the thermal properties of the composites. Additionally, the fluorescence characteristics revealed that the fluorescence excitation and emission spectra of the composites had a large redshift compared with that of PPS and possessed visible-light photoluminescence properties. These results indicate that the composites obtained can be used as optical sensors.

Homochiral Eu3+@MOF Composite for the Enantioselective Detection and Separation of (R/S)-Ornidazole

The development of homochiral materials for the enantioselective detection and separation of chiral drugs is in high demand for the pharmaceutical industry. Herein, an anionic homochiral metal-organic framework (HMOF) with in situ generated [Me₂NH₂]⁺ counterions, {[Me₂NH₂]₂[Zn₂(d-L)₂(HCO₂)(OH)]·5H₂O}_n (HMOF-1), was synthesized using a d-camphorate-derived enantiopure dicarboxylate ligand, 4,4'-[[(1R,3S)-1,2,2-trimethylcyclopentane-1,3-dicarbonyl]bis(azanediyl)]dibenzoic acid (d-H₂L) via a simple solvothermal method. Interestingly, HMOF-1 could be used as a parent framework to encapsulate Eu³⁺ cations via an ion-exchange process, yielding an Eu³⁺@HMOF-1 composite with dual-luminescent centers. The obtained Eu³⁺@HMOF-1 has high chemical stability and good luminescence stability in water. Importantly, Eu³⁺@HMOF-1 exhibits enhanced enantioselectivity and sensitivity in the detection of an important chiral nitroimidazole antibiotic, (R/S)-ornidazole (ONZ) in comparison to HMOF-1 under the same aqueous conditions. The enantiomeric excess (ee) value of the ONZ enantiomers can be accurately determined by the ratio of dual emission from the ligand and Eu³⁺. In addition, Eu³⁺@HMOF-1 shows the enantioselective separation of racemic ONZ enantiomers with an ee value of 86.6%. This work provides a simple strategy for the preparation of Ln^III-incorporated HMOF composite materials for the simultaneous enantioselective detection and separation of chiral drugs.

Two Multiresponsive Luminescent Zn-MOFs for the Detection of Different Chemicals in Simulated Urine and Antibiotics/Cations/Anions in Aqueous Media

Two Zn-MOFs, namely, {[Zn(L)_0.5(bpea)]·0.5H₂O·0.5DMF}_n [LCU-113 (for Liaocheng University)] and {[Zn(L)_0.5(ibpt)]·H₂O·DMF}_n (LCU-114), were synthesized based on flexible tetracarboxylic acid 1,3-bis(3,5-dicarboxyphenoxy)benzene (H₄L) and different N-ligands [bpea = 1,2-dipyridyl ethane; ibpt = 3-(4'-imidazolobenzene)-5-(pyridine-4'-yl)-1,2,4-triazole]. LCU-113 and LCU-114 possess twofold interpenetrating three-dimensional pillared layer structures, in which a two-dimensional layer formed by carboxylic acid and Zn²⁺ ions was pillared by bpea and ibpt, respectively. The two complexes show high water stability and high luminescence sensing performance toward organic solvents, ions, and antibiotics, as well as chemicals, in simulated urine. The investigation showed that (1) LCU-113 and LCU-114 could detect uric acid (UA, 2,6,8-trihydroxypurine, metabolite of purine) and p-aminophenol (PAP, biomarker of phenamine) in simulated urine by luminescence quenching, respectively, and (2) luminescence quenching of LCU-113 and LCU-114 occurred in aqueous solutions of nitrofurazone (NZF), Fe³⁺, and CrO₄^2-/Cr₂O₇^2-. All the above detections have excellent anti-interference ability and recyclability. The luminescence mechanism analysis indicates that weak interactions between the framework structures and the target analytes as well as the energy competition (inner filter effect) play an important role in sensing the above analytes. The practical application for monitoring NZF/Fe³⁺ in water samples was also tested.

Dual-emission ratiometric fluorescence probe based on copper nanoclusters for the detection of rutin and picric acid

In this paper, polyvinylpyrrolidone-templated copper nanoclusters (PVP-CuNCs) were synthesised using a hydrothermal method. Through the electrostatic interaction between PVP-CuNCs and rhodamine 6G, a dual-emission ratiometric fluorescent probe was constructed, and two well-separated emission peaks appeared at 420 nm and 570 nm. The selective detection of rutin and picric acid was achieved by fitting the relationship between the ratiometric fluorescence intensity (F₄₂₀/F₅₇₀) and the concentration of the target detection substance. The limits of detection of rutin and picric acid were 0.84 μM and 0.27 μM, respectively. The synthesised material has high stability and successfully allows the determination of rutin content in drugs and picric acid content in water samples with satisfactory recoveries.

A ratiometric sensor for selective detection of Hg2+ ions by combining second-order scattering and fluorescence signals of MIL-68(In)-NH2

Ratio fluorescence has attracted much attention because of its self-calibration properties. However, it is difficult to obtain suitable fluorescent materials with well-resolved signals simultaneously under one excitation. In this work, we report a different strategy, using MIL-68(In)-NH₂ as both the fluorescence element and the scattered light unit, and coupling the fluorescence and the scattered light to construct the fluorescence and scattered light ratio system. Based on the optical properties and the second-order scattering (SOS) of the material nanoparticles, the synthesized MIL-68(In)-NH₂ can be used to realize the ratio detection of Hg²⁺. Because the scattering intensity of small particle MIL-68(In)-NH₂ is weak, SOS is not obvious. When Hg²⁺ is introduced the coordination reaction between the amino nitrogen atoms of MIL-68(In)-NH₂ and Hg²⁺ make the particles larger, resulting in the decrease of fluorescence and the enhancement of SOS. As a result, a novel Hg²⁺ ratiometric detection method is developed by using the dual signal responses of the fluorescence and scattering. Under the optimal conditions (pH = 6, reaction time 5 min, room temperature, and the maximum excitation wavelength 365 nm), the linear range of the method is 0-100 μM, and the detection limit is 5.8 nM (Ksv = 9.89 × 10⁹ M^-1). In addition, the probe is successfully used to evaluate Hg²⁺ in actual water samples. Compared with the traditional method of recording only the fluorescence signal, the proposed fluorescence-scattering method provides a new strategy for the design of ratiometric sensors.

Multi-Emission from Single Metal-Organic Frameworks under Single Excitation

Multi-emission materials have come to prominent attention ascribed to their extended applications other than single-emission ones. General and robust design strategies of a single matrix with multi-emission under single excitation are urgently required. Metal-organic frameworks (MOFs) are porous materials prepared with organic ligands and metal nodes. The variety of metal nodes and ligands makes MOFs with great superiority as multi-emission matrices. Guest species encapsulated into the channels or pores of MOFs are the additional emission sites for multi-emission. In this review, multi-emission MOFs according to the different excitation sites are summarized and classified. The emission mechanisms are discussed, such as antenna effect, excited-state intramolecular proton transfer (ESIPT) and tautomerism for dual-emission. The factors that affect the emissions are revealed, including ligand-metal energy transfer and host-guest interaction, etc. Multi-emission MOFs could be predictably designed and prepared, once the emissive factors are controlled rationally in combination with the different multi-emission mechanisms. Correspondingly, new and practical applications are realized, including but not limited to ratiometric/multi-target sensing and bioimaging, white light-emitting diodes, and anti-counterfeiting. The design strategies of multi-emission MOFs and their extensive applications are reviewed. The results will shed light on other multi-emission systems to develop the structure-derived functionality and applications.

Water-Stable Eu6-Cluster-Based fcu-MOF with Exposed Vinyl Groups for Ratiometric and Fluorescent Visual Sensing of Hydrogen Sulfide

Detection of H₂S in the biological system has attracted enormous attention in recent years. In this work, a new vinyl-functionalized metal-organic framework (MOF), [(Me₂NH₂)₂] [Eu₆(μ₃-OH)₈(BDC-CH═CH₂)₆(H₂O)₆] (Eu-BDC-CH═CH₂, BDC-CH═CH₂ = 2-vinylterephthalic acid), was synthesized under solvothermal conditions. The vinyl groups in the ligands can not only modulate the "antenna effect" of the ligand on Eu³⁺ ions but also serve as an exposed reactive site to allow for the quantitative detection of H₂S by Eu-BDC-CH═CH₂. The ratiometric fluorescent probe has the advantages of water stability, acid-base stability (pH = 2-11), fast response (<2 min), high selectivity, and sensitivity (LOD = 38.4 μM). We also used Eu-BDC-CH═CH₂ to detect and analyze H₂S in tap and lake waters, demonstrating the potential of the probe for biological and environmental applications. In addition, the MOF-based agarose hydrogel film allows for the visual detection of H₂S via a smartphone by identifying the RGB values. The vinyl-functionalized MOF can thus be a powerful sensing platform for H₂S.

Design and Multiple Applications of Mixed-Ligand Metal-Organic Frameworks with Dual Emission

Herein, we revealed the factors that affect the emission in mixed-ligand metal-organic frameworks (MOFs) with the combination of terephthalic acid (BDC), 2-aminoterephthalic acid (BDC-NH₂), and 2,5-dihydroxylterephthalic acid [BDC-(OH)₂] as models. The -NH₂ and -(OH)₂ groups change the π-conjugation and luminescence behaviors than BDC, so the ligands show different optical behaviors. The Zn²⁺ ion with a 3d¹⁰ full electronic structure shows little effect on the emission of the ligand and is selected as the metal node. We found that the emission of BDC is weak and incompatible to that of BDC-NH₂, so only the emission of BDC-NH₂ was observed in the BDC/BDC-NH₂-MOF. Crosstalk occurs between the emissions from BDC and BDC-(OH)₂ for the single emission from BDC/BDC-(OH)₂-MOFs, even different ratios are selected. The MOFs prepared with BDC-NH₂ and BDC-(OH)₂ show dual emission at 450 and 550 nm, while the relative intensity was easily tuned with the ligand ratio and excitation wavelength. Thus, abundant optical behaviors and extensive applications were realized, including but not limited to (1) dual emission from single MOFs, (2) tunable color from blue to yellow with the excitation from 290 to 370 nm for information encryption and decryption, (3) white emission obtained under an excitation of 330 nm, and (4) response of -NH₂ groups to HCHO and Fe³⁺ ions for ratiometric fluorescence sensing and visual detection. This work revealed the factors that affect the emission in mixed-ligand MOFs, studied their optical behaviors, and realized different applications with single MOFs.

A dual-response ratiometric fluorescence imprinted sensor based on metal-organic frameworks for ultrasensitive visual detection of 4-nitrophenol in environments

A dual-response ratiometric fluorescence imprinted sensor based on visible/near-infrared emission was established for ultrasensitive, selective and visual detection 4-nitrophenol (4-NP). The molecularly imprinted polymer was incorporated in the ratiometric sensing system consisting of visible emission carbon dots@zeolitic imidazolate framework-8 (CDs@ZIF-8) and near-infrared emission cadmium telluride (CdTe) quantum dots. The CDs@ZIF-8 enhanced the emission of CDs and the fluorescence sensing performance. Compared to short wavelength of fluorophore, the near-infrared emission CdTe is less interference caused by auto-fluorescence of sample. The ratiometric fluorescence imprinted sensor exhibited dual response for 4-NP at 420 nm and 703 nm and a wide concentration response range. Moreover, a good linear response was existed in the two concentration ranges of 0.1 pM-3.0 pM and 0.05 μM-30 μM with the detection limit of 0.08 pM and 0.05 μΜ, respectively. Significantly, the fluorescence color changes can be observed from purple to pink to red with the naked eye. The fluorescence quenching mechanism of the ratimetric fluorescence imprinted sensor was discussed in detail. The ratiometric fluorescence imprinted sensor was used to detect 4-NP in various real samples with satisfactory recoveries of 97.5-106.3%, which provided an interesting avenue for the rapid detection of pollutant with high sensitivity, high selectivity and visualization in real environment.

Lanthanide-MOFs as Multifunctional luminescence Sensors

Five isostructural lanthanide metal-organic frameworks, [Ln(BDPO)(H2O)4] (Ln= Eu for CUST-623, Tb for CUST-624, Gd for CUST-625, Dy for CUST-626, Sm for CUST-627, BDPO = N, N' bis (3,5 - dicarboxyphenyl)-oxalamide)...

Assembly of a rod indium–organic framework with fluorescence properties for selective sensing of Cu2+, Fe3+ and nitroaromatics in water

A chiral fluorescent In-MOF with two types of unique homochiral In–O–In helical chains was synthesized. Then it was developed as a highly sensitive fluorescence sensor for detecting Cu2+, Fe3+ and nitroaromatics in water.

Tandem Förster resonance energy transfer induced visual ratiometric fluorescence sensing of tetracyclines based on zeolitic imidazolate framework-8 incorporated with carbon dots and safranine T

With increasing TC concentration, tandem FRET1 from CDs to TC, then FRET2 from TC to safranine T were occurred. TC could be easily recognized by naked eye. Besides, we could perform on-site detection of TC with the help of a mobile phone.

Metal–organic frameworks (MOFs) as fluorescence sensors: principles, development and prospects

This review classifies the latest developments of MOF-based fluorescence sensors according to the analytes, and discusses the challenges faced by MOF-based fluorescence sensors and promotes some directions for future research.

Ratiometric fluorescence immunoassay based on MnO2–o-phenylenediamine–fluorescent carbon nanodots for the detection of α-fetoprotein via fluorescence resonance energy transfer

The ratiometric fluorescence immunoassay based on MnO2–o-phenylenediamine–fluorescent carbon nanodots is superior to the traditional single-wavelength-based method.

Flexible ligand–Gd dye-encapsulated dual-emission metal–organic framework

We revealed the general considerations for host–guest ML-MOFs from the perspectives of ligands, metal nodes and embedded dyes. The results can be used to guide the preparation of other ML-MOFs to realize the host–guest strategy.

A Smartphone Optical Device for Point-of-Care Testing of Glucose and Cholesterol Using Ag NPs/UiO-66-NH2-Based Ratiometric Fluorescent Probe

Point-of-care testing (POCT) with the advantages of simplicity, rapidity, portability, and low-cost is of great importance to improve healthcare, especially in resource-limited settings and home healthcare settings. Moreover, it is a great challenge to quantitative POCT of multiplexed biomarkers within a single accessible assay but provides enhanced diagnostic accuracy and improved diagnostic efficiency. Herein, a smartphone optical device has been designed for POCT of glucose and cholesterol in metabolic syndrome patients using a ratiometric fluorescent sensor. The sensing system of Ag NPs/UiO-66-NH₂ and o-phenylenediamine presents a dual-emission response to H₂O₂ (the main product of glucose and cholesterol catalyzed by glucose oxidase and cholesterol oxidase) on account of the inner filter effect, resulting in an increase in the response of the fluorescence intensity ratio (F_555 nm/F_425 nm) accompanied by a distinguishable color transition from blue to yellow green. After compositing probes with a flexible substrate, the obtained test strip can be integrated with a smartphone-based portable platform to read RGB values for accurate testing of glucose and cholesterol with both detection limits of 10 μmol L^-1, which are hundreds of times lower than their concentrations in human serum. With the advantages of low-cost, ease of operation, and broad adaptability, this smartphone optical device holds great potential for portable detection of numerous targets in personalized healthcare and clinical diagnosis.

Metal-Organic Frameworks with Novel Catenane-like Interlocking: Metal-Determined Photoresponse and Uranyl Sensing

The assembly of two tripyridinium-tricarboxylate ligands and different metal ions leads to seven isostructural MOFs, which show novel 2D→2D supramolecular entanglement featuring catenane-like interlocking of tricyclic cages. The MOFs show tripyridinium-afforded and metal-modulated photoresponsive properties. The MOFs with d¹⁰ metal centers (1-Cd, 1-Zn, 2-Cd, 2-Zn) show fast and reversible photochromism and concomitant fluorescence quenching, 1-Ni displays slower photochromism but does not fluoresce, and 1-Co and 2-Co are neither photochromic nor fluorescent. It is shown here that the network entanglement dictates donor-acceptor close contacts, which enable fluorescence originated from interligand charge transfer. The contacts also allow photoinduced electron transfer, which underlies photochromism and concomitant fluorescence response. The metal dependence in fluorescence and photochromism can be related to energy transfer through metal-centered d-d transitions. In addition, 1-Cd is demonstrated to be a potential fluorescence sensor for sensitive and selective detection of UO₂ ²⁺ in water.