Recent progress in the development of transition-metal based photoredox catalysts

The advent and development of organophotoredox catalysis

In the last decade, photoredox catalysis has unlocked unprecedented reactivities in synthetic organic chemistry. Seminal advancements in the field have involved the use of well-studied metal complexes as photoredox catalysts (PCs). More recently, the synthetic community, looking for more sustainable approaches, has been moving towards the use of purely organic molecules. Organic PCs are generally cheaper and less toxic, while allowing their rational modification to an increased generality. Furthermore, organic PCs have allowed reactivities that are inaccessible by using common metal complexes. Likewise, in synthetic catalysis, the field of photocatalysis is now experiencing a green evolution moving from metal catalysis to organocatalysis. In this feature article, we discuss and critically comment on the scientific reasons for this ongoing evolution in the field of photoredox catalysis, showing how and when organic PCs can efficiently replace their metal counterparts.

A Photoreactive Iron(II) Complex Luminophore

Controlling the order and lifetimes of electronically excited states is essential to effective light-to-potential energy conversion by molecular chromophores. This work reports a luminescent and photoreactive iron(II) complex, the first performant group homologue of prototypical sensitizers of ruthenium. Double cyclometalation of a phenylphenanthroline framework at iron(II) favors the population of a triplet metal-to-ligand charge transfer (³MLCT) state as the lowest energy excited state. Near-infrared (NIR) luminescence exhibits a monoexponential decay with τ = 2.4 ns in the solid state and 1 ns in liquid phase. Lifetimes of 14 ns at 77 K are in line with a narrowing of the NIR emission band at λ_em,max = 1170-1230 nm. Featuring a ³MLCT excited-state redox potential of -2 V vs the ferrocene/ferrocenium couple, the use of the Fe(II) chromophore as a sensitizer for light-driven synthesis is exemplified by the radical cross-coupling of 4-chlorobromobenzene and benzene.

High Triplet Energy Iridium(III) Isocyanoborato Complex for Photochemical Upconversion, Photoredox and Energy Transfer Catalysis

Cyclometalated Ir(III) complexes are often chosen as catalysts for challenging photoredox and triplet-triplet-energy-transfer (TTET) catalyzed reactions, and they are of interest for upconversion into the ultraviolet spectral range. However, the triplet energies of commonly employed Ir(III) photosensitizers are typically limited to values around 2.5-2.75 eV. Here, we report on a new Ir(III) luminophore, with an unusually high triplet energy near 3.0 eV owing to the modification of a previously reported Ir(III) complex with isocyanoborato ligands. Compared to a nonborylated cyanido precursor complex, the introduction of B(C₆F₅)₃ units in the second coordination sphere results in substantially improved photophysical properties, in particular a high luminescence quantum yield (0.87) and a long excited-state lifetime (13.0 μs), in addition to the high triplet energy. These favorable properties (including good long-term photostability) facilitate exceptionally challenging organic triplet photoreactions and (sensitized) triplet-triplet annihilation upconversion to a fluorescent singlet excited state beyond 4 eV, unusually deep in the ultraviolet region. The new Ir(III) complex photocatalyzes a sigmatropic shift and [2 + 2] cycloaddition reactions that are unattainable with common transition metal-based photosensitizers. In the presence of a sacrificial electron donor, it furthermore is applicable to demanding photoreductions, including dehalogenations, detosylations, and the degradation of a lignin model substrate. Our study demonstrates how rational ligand design of transition-metal complexes (including underexplored second coordination sphere effects) can be used to enhance their photophysical properties and thereby broaden their application potential in solar energy conversion and synthetic photochemistry.

Modeling and Simulation of Reaction Environment in Photoredox Catalysis: A Critical Review

From the pharmaceutical industry’s point of view, photoredox catalysis has emerged as a powerful tool in the field of the synthesis of added-value compounds. With this method, it is possible to excite the catalyst by the action of light, allowing electron transfer processes to occur and, consequently, oxidation and reduction reactions. Thus, in association with photoredox catalysis, microreactor technology and continuous flow chemistry also play an important role in the development of organic synthesis processes, as this technology offers high yields, high selectivity and reduced side reactions. However, there is a lack of a more detailed understanding of the photoredox catalysis process, and computational tools based on computational fluid dynamics (CFD) can be used to deal with this and boost to reach higher levels of accuracy to continue innovating in this area. In this review, a comprehensive overview of the fundamentals of photoredox catalysis is provided, including the application of this technology for the synthesis of added-value chemicals in microreactors. Moreover, the advantages of the continuous flow system in comparison with batch systems are pointed out. It was also demonstrated how modeling and simulation using computational fluid dynamics (CFD) can be critical for the design and optimization of microreactors applied to photoredox catalysis, so as to better understand the reagent interactions and the influence of light in the reaction medium. Finally, a discussion about the future prospects of photoredox reactions considering the complexity of the process is presented.

Photoactive Metal Carbonyl Complexes Bearing N-Heterocyclic Carbene Ligands: Synthesis, Characterization, and Viability as Photoredox Catalysts

This report details the synthesis and characterization of a small family of previously unreported, structurally related chromium, molybdenum, tungsten, manganese, and iron complexes bearing N-heterocyclic carbene and carbonyl supporting ligands. These complexes have the general form [ML(CO)₃X] or [ML(CO)₃], where X = CO or Br and L = 1-phenyl-3-(2-pyridyl)imidazolin-2-ylidene. Where possible, the solid-state, spectroscopic, electrochemical, and photophysical properties of these molecules were studied using a combination of experiment and theory. Photophysical studies reveal that decarbonylation occurs when these complexes are exposed to ultraviolet light, with the CO ligand being replaced with a labile acetonitrile solvent molecule. To obtain insights into the potential utility, scope, and applications of these complexes in visible-light-mediated photoredox catalysis, their capacity to facilitate a range of photoinduced reactions via the reductive or oxidative functionalization of organic molecules was investigated. These chromium, molybdenum, and manganese catalysts efficiently facilitated atom-transfer radical addition processes. In light of their photolability, these types of catalysts may potentially allow for the development of photoinduced reactions involving less conventional inner-sphere electron-transfer pathways.

Acetylation of alcohols and amines under visible light irradiation: diacetyl as an acylation reagent and photosensitizer

An unprecedented strategy for the acetylation of alcohols and amines using diacetyl as both an acylation reagent and a photosensitizer was well developed.

Visible-light-promoted sulfenylation of 6-aminouracils under catalyst-free conditions

Visible-light-promoted reactions have proven to be a decent strategy for the synthesis of complex molecules.

Tuning the luminescence of transition metal complexes with acyclic diaminocarbene ligands

Organometallics featuring acyclic diaminocarbene ligands have recently emerged as powerful emitters for use in electroluminescent technologies.

Photoactive iron complexes: more sustainable, but still a challenge

With the “Criticality Score” used as a benchmark for sustainability – potentials, strategies and challenges are discussed to replace noble metal compounds in photosensitizers by the sustainable alternative iron.

Cationic Ir(III) Complexes Featuring Phenylimidazole-type Cyclometalated Ligands: Fluorine-Free Blue Phosphorescent Emitters for Light-Emitting Devices

The development of blue emissive cationic Ir(III) complexes with no fluorine substitutions but with sufficient blue color purity and high phosphorescence efficiency has remained challenging. Here, fluorine-free cyan to deep blue emissive cationic Ir(III) complexes with phenylimidazole-type cyclometalated ligands (C^∧N) are reported, which are [Ir(dphim)₂(dmapzpy)]PF₆ (1), [Ir(ipr-dphim)₂(dmapzpy)]PF₆ (2), [Ir(ipr-dphim)₂(bipz)]PF₆ (3), and [Ir(ipr-dphim)₂(bicb)]PF₆ (4). 1,2-Diphenyl-1H-imidazole (dphim) and 1-(2,6-diisopropylphenyl)-2-phenyl-1H-imidazole (ipr-dphim) are the phenylimidazole-type C^∧N ligands, and 4-dimethylamino-2-(1H-pyrazol-1-yl)pyridine (dmapzpy), di(1H-pyrazol-1-yl)methane (bipz), and 3,3'-methylenebis(1-methyl-1H-imidazol-3-ium-2-ide) (bicb) are the neutral ancillary ligands (A^∧A). In both solution and diluted films, complex 1 shows a cyan emission with the emission maxima at ∼472 and 495 nm, and complexes 2-4 provide a deep blue emission with the emission maxima at ∼460 and 480 nm. While the complexes exhibit low to moderate phosphorescence efficiencies (0.05-0.35) in a degassed CH₃CN solution, they exhibit high phosphorescence efficiencies (up to 0.82) in diluted films. Theoretical calculations revealed that the mixed ³π-π* (C^∧N-centered)/³MLCT (Ir → C^∧N) states are responsible for the emission afforded by complexes 1-4, which undergo nonradiative deactivations induced by different types of metal-centered states. Organic light-emitting diodes with complexes 1-4 as phosphorescent dopants are fabricated by a solution process, which affords a blue-green to blue emission with the emission maxima at ∼460 and 490 nm for the blue devices and a high current efficiency at 28.1 cd A^-1 for the blue-green device. Solid-state light-emitting electrochemical cells are also fabricated with complexes 1-2 as phosphorescent dopants, which provide green-blue to blue emission with a high luminance (up to 840 cd m^-2) and current-efficiency (up to 16.8 cd A^-1) under a constant-current driving. The work reveals that, by using phenylimidazole-type C^∧N ligands and optimized A^∧A ligands, blue emissive cationic Ir(III) complexes with no fluorine substitutions but with sufficient blue-color purity and a high phosphorescence efficiency can be developed.

Fluorescence Imaging and Photodynamic Inactivation of Bacteria Based on Cationic Cyclometalated Iridium(III) Complexes with Aggregation-Induced Emission Properties

Antibacterial photodynamic therapy (PDT) is one of the emerging methods for curbing multidrug-resistant bacterial infections. Effective fluorescent photosensitizers with dual functions of bacteria imaging and PDT applications are highly desirable. In this study, three cationic and heteroleptic cyclometalated Ir(III) complexes with the formula of [Ir(CˆN)₂ (NˆN)][PF₆ ] are prepared and characterized. These Ir(III) complexes named Ir(ppy)₂ bP, Ir(1-pq)₂ bP, and Ir(2-pq)₂ bP are comprised of three CˆN ligands (i.e., 2-phenylpyridine (ppy), 1-phenylisoquinoline (1-pq), and 2-phenylquinoline (2-pq)) and one NˆN bidentate co-ligand (bP). The photophysical characterizations demonstrate that these Ir(III) complexes are red-emitting, aggregation-induced emission active luminogens. The substitution of phenylpyridine with phenylquinoline isomers in the molecules greatly enhances their UV and visible-light absorbance as well as the photoinduced reactive oxygen species (ROS) generation ability. All three Ir(III) complexes can stain both Gram-positive and Gram-negative bacteria efficiently. Interestingly, even though Ir(1-pq)₂ bP and Ir(2-pq)₂ bP are constitutional isomers with very similar structures and similar ROS generation ability in buffer, the former eradicates bacteria much more effectively than the other through white light-irradiated photodynamic inactivation. This work will provide valuable information on the rational design of Ir(III) complexes for fluorescence imaging and efficient photodynamic inactivation of bacteria.

Chemistry on the Complex: Derivatization of TiO4 N2 -Based Complexes and Application to Multi-Step Synthesis

The chemistry on octahedral TiO₄ N₂ -complexes is described. The Ti(IV)-based precursors are composed of two 3,3'-diphenyl-2,2'-biphenolato ligands (1) and one substituted 1,10-phenanthroline ligand (2-5). The application of imine condensation, palladium-catalyzed C-C bond formation or copper-catalysed azide-alkyne cycloaddition allowed the grafting of various new groups onto these species. In particular Sonogashira reactions permitted to observe an excellent conversion of the starting complexes. This systematic study enabled to compile the factors required to preserve the framework of the complexes in the course of a chemical transformation. Thanks to this chemistry realized on the complex, the Ti(1)₂ fragment was used as a protecting group to develop a multi-step synthesis of a bis-phenanthroline compound (12), for which the synthesis without this protection failed. Thus, a dinuclear complex [Ti₂ (1)₄ (12)] was first prepared starting from complex precursor bearing an acetylenic function via a Hay coupling reaction. This was followed by a deprotection step affording 12. Overall, this work illustrates how the Ti(1)₂ fragment could be an useful tool for the preparation of unprecedented diimine compounds.

Charge-transfer excited states of π- and 4f-orbitals for development of luminescent Eu(III) complexes

Transition metal complexes provide photofunctional properties through the charge transfer excited states of their metal ion and organic ligand components. Recently, there are increasing reports on the charge transfer excited states of the ligand (π)- and 4f-orbitals of lanthanide complexes, where the latter are shielded by filled 5s² and 5p⁶ orbitals. This area of research is relatively unestablished; thus, the study of photo-excited organic-lanthanide charge transfer would lead to the construction of next-generation photofunctional metal complexes. In this review, we summarize the latest research progress in photofunctional materials using the charge transfer excited states of lanthanide complexes, and discuss the photophysical/theoretical analyses of these charge transfer excited states.

Enhanced phosphorescence of Pd(II) and Pt(II) complexes adsorbed onto Laponite for optical sensing of triplet molecular dioxygen in water

Two isoleptic complexes involving Pd(II) and Pt(II) centres with a tetradentate luminophoric ligand were adsorbed onto Laponite (LAP), yielding H2O-dispersible nanohybrids with remarkable photoexcited state properties. The adsorption promoted rigidification of the coordination compounds and suppression of roto-vibrational deactivation pathways, thus enhancing the performance of the molecular species. Interestingly, room temperature phosphorescence was achieved in the case of the Pd(II)-containing nanohybrid along with a marked 3O2 sensitivity, whereas the photoluminescence of the Pt(II)-based material showed only a mild dependence on the presence of 3O2 while reaching up to 37% quantum yield.

Photoredox-Catalyzed Reduction of Halogenated Arenes in Water by Amphiphilic Polymeric Nanoparticles

The use of organic photoredox catalysts provides new ways to perform metal-free reactions controlled by light. While these reactions are usually performed in organic media, the application of these catalysts at ambient temperatures in aqueous media is of considerable interest. We here compare the activity of two established organic photoredox catalysts, one based on 10-phenylphenothiazine (PTH) and one based on an acridinium dye (ACR), in the light-activated dehalogenation of aromatic halides in pure water. Both PTH and ACR were covalently attached to amphiphilic polymers that are designed to form polymeric nanoparticles with hydrodynamic diameter DH ranging between 5 and 11 nm in aqueous solution. Due to the hydrophobic side groups that furnish the interior of these nanoparticles after hydrophobic collapse, water-insoluble reagents can gather within the nanoparticles at high local catalyst and substrate concentrations. We evaluated six different amphiphilic polymeric nanoparticles to assess the effect of polymer length, catalyst loading and nature of the catalyst (PTH or ACR) in the dechlorination of a range of aromatic chlorides. In addition, we investigate the selectivity of both catalysts for reducing different types of aryl-halogen bonds present in one molecule, as well as the activity of the catalysts for C-C cross-coupling reactions. We find that all polymer-based catalysts show high activity for the reduction of electron-poor aromatic compounds. For electron-rich compounds, the ACR-based catalyst is more effective than PTH. In the selective dehalogenation reactions, the order of bond stability is C-Cl > C-Br > C-I irrespective of the catalyst applied. All in all, both water-compatible systems show good activity in water, with ACR-based catalysts being slightly more efficient for more resilient substrates.

Ligand-to-Metal Charge-Transfer Photophysics and Photochemistry of Emissive d0 Titanocenes: A Spectroscopic and Computational Investigation

Complexes with ligand-to-metal charge-transfer (LMCT) excited states involving d⁰ metals represent a new design for photocatalysts. Herein, the photochemistry and photophysics of d⁰ titanocenes of the type Cp₂Ti(C₂R)₂, where C₂R = ethynylphenyl (C₂Ph), 4-ethynyldimethylaniline (C₂DMA), or 4-ethynyltriphenylamine (C₂TPA), have been investigated. Cp₂Ti(C₂Ph)₂ and Cp₂Ti(C₂DMA)₂ have also been characterized by single-crystal X-ray diffraction. The two aryl rings in Cp₂Ti(C₂DMA)₂ are nearly face-to-face in the solid state, whereas they are mutually perpendicular for Cp₂Ti(C₂Ph)₂. All three complexes are brightly emissive at 77 K but photodecompose at room temperature when irradiated into their lowest-energy absorption band. The emission wavelengths and photodecomposition quantum yields are as follows: Cp₂Ti(C₂Ph)₂, 575 nm and 0.65; Cp₂Ti(C₂TPA)₂, 642 nm and 0.42; Cp₂Ti(C₂DMA)₂, 672 nm and 0.25. Extensive benchmarking of the density functional theory (DFT) model against the structural data and of the time-dependent DFT (TDDFT) model against the absorption and emission data was performed using combinations of 13 different functionals and 4 basis sets. The model that predicted the absorption and emission data with the greatest fidelity utilized MN15/LANL2DZ for both the DFT optimization and the TDDFT. Computational analysis shows that absorption involves a transition to a ¹LMCT state. Whereas the spectroscopic data for Cp₂Ti(C₂TPA)₂ and Cp₂Ti(C₂DMA)₂ are well modeled using the optimized structure of these complexes, Cp₂Ti(C₂Ph)₂ required averaging of the spectra from multiple rotamers involving rotation of the Ph rings. Consistent with this finding, an energy scan of all rotamers showed a very flat energetic surface, with less than 1.3 kcal/mol separating the minimum and maximum. The computational data suggest that emission occurs from a ³LMCT state. Optimization of the ³LMCT state demonstrates compression of the C-Ti-C bond angle, consistent with the known products of photodecomposition.

Recent advances in visible light-activated radical coupling reactions triggered by (i) ruthenium, (ii) iridium and (iii) organic photoredox agents

Photoredox chemistry with organic or transition metal agents has been reviewed in earlier years, but such is the pace of progress that we will overlap very little with earlier comprehensive reviews. This review first presents an overview of the area of research and then examines recent examples of C-C, C-N, C-O and C-S bond formations via radical intermediates with transition metal and organic radical promoters. Recent successes with Birch reductions are also included. The transition metal chemistry will be restricted to photocatalysts based on the most widely used metals, Ru and Ir, but includes coupling chemistries that take advantage of low-valent nickel, or occasionally copper, complexes to process the radicals that are formed. Our focus is on developments in the past 10 years (2011-2021). This period has also seen great advances in the chemistry of organic photoredox reagents and the review covers this area. The review is intended to present highlights and is not comprehensive.

Quantitative Structure-Property Relationship Modelling for the Prediction of Singlet Oxygen Generation by Heavy-Atom-Free BODIPY Photosensitizers*

Heavy-atom-free sensitizers forming long-living triplet excited states via the spin-orbit charge transfer intersystem crossing (SOCT-ISC) process have recently attracted attention due to their potential to replace costly transition metal complexes in photonic applications. The efficiency of SOCT-ISC in BODIPY donor-acceptor dyads, so far the most thoroughly investigated class of such sensitizers, can be finely tuned by structural modification. However, predicting the triplet state yields and reactive oxygen species (ROS) generation quantum yields for such compounds in a particular solvent is still very challenging due to a lack of established quantitative structure-property relationship (QSPR) models. In this work, the available data on singlet oxygen generation quantum yields (ΦΔ ) for a dataset containing >70 heavy-atom-free BODIPY in three different solvents (toluene, acetonitrile, and tetrahydrofuran) were analyzed. In order to build reliable QSPR model, a series of new BODIPYs were synthesized that bear different electron donating aryl groups in the meso position, their optical and structural properties were studied along with the solvent dependence of singlet oxygen generation, which confirmed the formation of triplet states via the SOCT-ISC mechanism. For the combined dataset of BODIPY structures, a total of more than 5000 quantum-chemical descriptors was calculated including quantum-chemical descriptors using density functional theory (DFT), namely M06-2X functional. QSPR models predicting ΦΔ values were developed using multiple linear regression (MLR), which perform significantly better than other machine learning methods and show sufficient statistical parameters (R=0.88-0.91 and q2 =0.62-0.69) for all three solvents. A small root mean squared error of 8.2 % was obtained for ΦΔ values predicted using MLR model in toluene. As a result, we proved that QSPR and machine learning techniques can be useful for predicting ΦΔ values in different media and virtual screening of new heavy-atom-free BODIPYs with improved photosensitizing ability.

Ultrasound-Engineered fabrication of immobilized molybdenum complex on Cross-Linked poly (Ionic Liquid) as a new acidic catalyst for the regioselective synthesis of pharmaceutical polysubstituted spiro compounds

A novel supported molybdenum complex on cross-linked poly (1-Aminopropyl-3-vinylimidazolium bromide) entrapped cobalt oxide nanoparticles has been successfully fabricated through two different procedures, i.e. ultrasound (US) irradiations (100 W, 40 kHz) and reflux. The efficiency of the two different methods was comparatively investigated on the fundamental properties of proposed catalyst using diverse characterization techniques. Based on the obtained results, the ultrasonication method provides controlled polymerization process; as a result, well connected polymeric network is formed. In addition, the use of ultrasound waves turned out to be able to increase the particles uniformity, specific surface area (from 79.19 to 223.83 m2/g), and the onset thermal degradation temperature (Td) value (from 248 to 400 °C) of the prepared catalyst which intensifies the catalytic efficiency. Besides, US-treated catalyst demonstrated high chemical stability and maintained its cross-linked network after eight cycles recovery, while the cross-linked network of catalyst obtained under silent condition was completely disrupted. Furthermore, the ultrafast multi-step fabrication procedure was performed in less than 6 h under ultrasonic condition while a similar process promoted by a mechanical stirring method came to a conclusion after 5-6 days. Accordingly, the utility of the ultrasound irradiation was proved, and US-treated catalyst was applied for improved synthetic methodology of spiro 1,4-dihydropyridines and spiro pyranopyrazoles through different acidic active sites. Due to the significant synergistic influence between the proposed catalyst and US irradiation, a variety of novel and recognized mono-spiro compounds were fabricated at room temperature in high regioselectivity.

Metal-Based Catalytic Drug Development for Next-Generation Cancer Therapy

Considering the high increase in mortality caused by cancer in recent years, cancer drugs with novel mechanisms of anticancer action are urgently needed to overcome the drawbacks of platinum-based chemotherapeutics. Recently, in the area of metal-based cancer drug development research, the concept of catalytic cancer drugs has been introduced with organometallic Ru^II , Os^II , Rh^III and Ir^III complexes. These complexes are reported as catalysts for many important biological transformations in cancer cells such as nicotinamide adenine dinucleotide (NAD(P)H) oxidation to NAD⁺ , reduction of NAD⁺ to NADH, and reduction of pyruvate to lactate. These unnatural intracellular transformations with catalytic and nontoxic doses of metal complexes are known to severely perturb several important biochemical pathways and could be the antecedent of next-generation catalytic cancer drug development. In this concept, we delineate the prospects of such recently reported organometallic Ru^II , Os^II , Rh^III and Ir^III complexes as future catalytic cancer drugs. This new approach has the potential to deliver new cancer drug candidates.

Capturing photochemical and photophysical transformations in iron complexes with ultrafast X-ray spectroscopy and scattering

Light-driven chemical transformations provide a compelling approach to understanding chemical reactivity with the potential to use this understanding to advance solar energy and catalysis applications. Capturing the non-equilibrium trajectories of electronic excited states with precision, particularly for transition metal complexes, would provide a foundation for advancing both of these objectives. Of particular importance for 3d metal compounds is characterizing the population dynamics of charge-transfer (CT) and metal-centered (MC) electronic excited states and understanding how the inner coordination sphere structural dynamics mediate the interaction between these states. Recent advances in ultrafast X-ray laser science has enabled the electronic excited state dynamics in 3d metal complexes to be followed with unprecedented detail. This review will focus on simultaneous X-ray emission spectroscopy (XES) and X-ray solution scattering (XSS) studies of iron coordination and organometallic complexes. These simultaneous XES-XSS studies have provided detailed insight into the mechanism of light-induced spin crossover in iron coordination compounds, the interaction of CT and MC excited states in iron carbene photosensitizers, and the mechanism of Fe-S bond dissociation in cytochrome c.

The pH-dependent orientation of N3 dye on a gold substrate is revealed using heterodyne-detected vibrational sum frequency generation spectroscopy

We report on systematic changes to the adsorption geometry of the dye N3 {[cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato ruthenium(II)]} on a gold substrate as the pH of the deposition environment is altered. The protonation states of the four -COOH groups of the N3 dye change according to the modified pH conditions, thus affecting the number of -COOH and -NCS functional groups that participate in the adsorption to gold. Here, we use heterodyne detected vibrational sum frequency generation (HD-VSFG) spectroscopy to obtain surface specific vibrational information on both -COOH and -NCS groups as a function of pH of the deposition conditions. Polarization-dependent HD-VSFG yields sets of complex χ⁽²⁾ spectra, enabling us to perform a simultaneous fitting procedure to the polarization-dependent real and imaginary components and thus extract detailed structural information of the N3/gold interface. Our results show that N3 preferentially adsorbs to gold either with two -COOH groups and one -NCS group in more acidic conditions or with one -COOH group and two -NCS groups in more basic conditions.

Unveiling Potent Photooxidation Behavior of Catalytic Photoreductants

We describe a photocatalytic system that reveals latent photooxidant behavior from one of the most reducing conventional photoredox catalysts, N-phenylphenothiazine (PTH). This aerobic photochemical reaction engages difficult to oxidize feedstocks, such as benzene, in C(sp²)-N coupling reactions through direct oxidation. Mechanistic studies are consistent with activation of PTH via photooxidation and with Lewis acid cocatalysts scavenging inhibitors inextricably formed in this process.

Photocatalytic Dehydroxymethylative Arylation by Synergistic Cerium and Nickel Catalysis

Under mild reaction conditions with inexpensive cerium and nickel catalysts, easily accessible free alcohols can now be utilized as operationally simple and robust carbon pronucleophiles in selective C(sp³)-C(sp²) cross-couplings. Facilitated by automated high-throughput experimentation, sterically encumbered benzoate ligands have been identified for robust cerium complexes, enabling the synergistic cooperation of cerium catalysis in the emerging metallaphotoredox catalysis. A broad range of free alcohols and aromatic halides can be facilely employed in this transformation, representing a new paradigm for the C(sp³)-C(sp²) bond construction between free alcohols and aryl halides with the extrusion of formaldehyde. Moreover, mechanistic investigations have been conducted, leading to the identification of a tribenzoate cerium(III) complex as a viable intermediate.

Light-mediated Seleno-Functionalization of Organic Molecules: Recent Advances

Organoselenium compounds constitute an important class of substances with applications in the biological, medicinal and material sciences as well as in modern organic synthesis, attracting considerable attention from the scientific community. Therefore, the construction of the C-Se bond via facile, efficient and sustainable strategies to access complex scaffolds from simple substrates are an appealing and hot topic. Visible light can be regarded as an alternative source of energy and is associated with environmentally-friendly processes. Recently, the use of visible-light mediated seleno-functionalization has emerged as an ideal and powerful route to obtain high-value selenylated products, with diminished cost and waste. This approach, involving photo-excited substrates/catalyst and single-electron transfer (SET) between substrates in the presence of visible light has been successfully used in the versatile and direct insertion of organoselenium moieties in activated and unactivated C(sp³ )-H, C(sp² )-H, C(sp)-H bonds as well as C-heteroatom bonds. In most cases, ease of operation and accessibility of the light source (LEDs or commercial CFL bulbs) makes this approach more attractive and sustainable than the traditional strategies.

Visible-light-promoted E-selective synthesis of α-fluoro-β-arylalkenyl sulfides via the deoxygenation/isomerization process

Regioselective synthesis of α-fluoro-β-arylalkenyl sulfides has been established with gem-difluoroalkenes and sodium sulfinates in a transition-metal-free manner. A series of control experiments were executed to demonstrate thiol radicals and anions as the proposed intermediates. Notably, regioselective Z→E isomerization was achieved under green light irradiation in the absence of a photoinitiator.

Photophysical Properties and Redox Potentials of Photosensitizers for Organic Photoredox Transformations

Photoredox catalysis has proven to be a powerful tool in synthetic organic chemistry. The rational design of photosensitizers with improved photocatalytic performance constitutes a major advancement in photoredox organic transformations. This review summarizes the fundamental ground-state and excited-state photophysical and electrochemical attributes of molecular photosensitizers, which are important determinants of their photocatalytic reactivity.

Versatile Reactivity of MnII Complexes in Reactions with N-Donor Heterocycles: Metamorphosis of Labile Homometallic Pivalates vs. Assembling of Endurable Heterometallic Acetates

Reaction of 2,2′-bipyridine (2,2′-bipy) or 1,10-phenantroline (phen) with [Mn(Piv)₂(EtOH)]_n led to the formation of binuclear complexes [Mn₂(Piv)₄L₂] (L = 2,2′-bipy (1), phen (2); Piv⁻ is the anion of pivalic acid). Oxidation of 1 or 2 by air oxygen resulted in the formation of tetranuclear Mn^II/III complexes [Mn₄O₂(Piv)₆L₂] (L = 2,2′-bipy (3), phen (4)). The hexanuclear complex [Mn₆(OH)₂(Piv)₁₀(pym)₄] (5) was formed in the reaction of [Mn(Piv)₂(EtOH)]_n with pyrimidine (pym), while oxidation of 5 produced the coordination polymer [Mn₆O₂(Piv)₁₀(pym)₂]_n (6). Use of pyrazine (pz) instead of pyrimidine led to the 2D-coordination polymer [Mn₄(OH)(Piv)₇(µ₂-pz)₂]_n (7). Interaction of [Mn(Piv)₂(EtOH)]_n with FeCl₃ resulted in the formation of the hexanuclear complex [Mn^II₄Fe^III₂O₂(Piv)₁₀(MeCN)₂(HPiv)₂] (8). The reactions of [MnFe₂O(OAc)₆(H₂O)₃] with 4,4′-bipyridine (4,4′-bipy) or trans-1,2-(4-pyridyl)ethylene (bpe) led to the formation of 1D-polymers [MnFe₂O(OAc)₆L₂]_n·2nDMF, where L = 4,4′-bipy (9·2DMF), bpe (10·2DMF) and [MnFe₂O(OAc)₆(bpe)(DMF)]_n·3.5nDMF (11·3.5DMF). All complexes were characterized by single-crystal X-ray diffraction. Desolvation of 11·3.5DMF led to a collapse of the porous crystal lattice that was confirmed by PXRD and N₂ sorption measurements, while alcohol adsorption led to porous structure restoration. Weak antiferromagnetic exchange was found in the case of binuclear Mn^II complexes (J_Mn-Mn = −1.03 cm⁻¹ for 1 and 2). According to magnetic data analysis (J_Mn-Mn = −(2.69 ÷ 0.42) cm⁻¹) and DFT calculations (J_Mn-Mn = −(6.9 ÷ 0.9) cm⁻¹) weak antiferromagnetic coupling between Mn^II ions also occurred in the tetranuclear {Mn₄(OH)(Piv)₇} unit of the 2D polymer 7. In contrast, strong antiferromagnetic coupling was found in oxo-bridged trinuclear fragment {MnFe₂O(OAc)₆} in 11·3.5DMF (J_Fe-Fe = −57.8 cm⁻¹, J_Fe-Mn = −20.12 cm⁻¹).

Transfer hydrogenation catalysis in cells

Hydrogenation reactions in biology are usually carried out by enzymes with nicotinamide adenine dinucleotide (NAD(P)H) or flavin mononucleotide (FAMH2)/flavinadenine dinucleotide (FADH2) as cofactors and hydride sources. Industrial scale chemical transfer hydrogenation uses small molecules such as formic acid or alcohols (e.g. propanol) as hydride sources and transition metal complexes as catalysts. We focus here on organometallic half-sandwich RuII and OsII η6-arene complexes and RhIII and IrIII η5-Cp x complexes which catalyse hydrogenation of biomolecules such as pyruvate and quinones in aqueous media, and generate biologically important species such as H2 and H2O2. Organometallic catalysts can achieve enantioselectivity, and moreover can be active in living cells, which is surprising on account of the variety of poisons present. Such catalysts can induce reductive stress using formate as hydride source or oxidative stress by accepting hydride from NAD(P)H. In some cases, photocatalytic redox reactions can be induced by light absorption at metal or flavin centres. These artificial transformations can interfere in biochemical pathways in unusual ways, and are the basis for the design of metallodrugs with novel mechanisms of action.

Photocatalyst-independent photoredox ring-opening polymerization of O-carboxyanhydrides: stereocontrol and mechanism

Photoredox ring-opening polymerization of O-carboxyanhydrides allows for the synthesis of polyesters with precisely controlled molecular weights, molecular weight distributions, and tacticities. While powerful, obviating the use of precious metal-based photocatalysts would be attractive from the perspective of simplifying the protocol. Herein, we report the Co and Zn catalysts that are activated by external light to mediate efficient ring-opening polymerization of O-carboxyanhydrides, without the use of exogenous precious metal-based photocatalysts. Our methods allow for the synthesis of isotactic polyesters with high molecular weights (>200 kDa) and narrow molecular weight distributions (M w/M n < 1.1). Mechanistic studies indicate that light activates the oxidative status of a CoIII intermediate that is generated from the regioselective ring-opening of the O-carboxyanhydride. We also demonstrate that the use of Zn or Hf complexes together with Co can allow for stereoselective photoredox ring-opening polymerizations of multiple racemic O-carboxyanhydrides to synthesize syndiotactic and stereoblock copolymers, which vary widely in their glass transition temperatures.

Efficient and Selective Visible-Light-Driven Oxidative Coupling of Amines to Imines in Air over CdS@Zr-MOFs

Construction of porous photoactive MOF-based composite systems is regarded as one of the most effective strategies to improve light harvesting, increase the surface area, provide plenty of exposed active sites, and promote the reduction and oxidation abilities of some organic photocatalytic reactions. Herein, we synthesized porous CdS@Zr-MOF photocatalysts based on the representative photocatalyst CdS and crystalline Zr-MOFs, such as MOF-808, NU-1000, and PCN-222, to illustrate their excellent photocatalytic performance for the synthesis of imines in air. The morphology and composition of these photocatalysts were investigated by X-ray powder diffraction (XRD), inductively coupled plasma-atomic emission spectrometry (ICP-AES), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS), indicating their crystallinity, high porosity, and interfacial interaction between constituents. Compared with individual components, these porous CdS@Zr-MOF composites could remarkably promote photocatalytic activity for the oxidative coupling of amines under air and visible-light conditions. The photocatalytic reaction showed broad substrate suitability. More importantly, the conversion yield reached up to 95% for the inactive aliphatic amines, and imines were formed as the single product. The improvement of the photocatalytic performance of CdS@Zr-MOF composites can be mainly ascribed to their high surface areas, more exposed active sites, excellent dispersion of CdS, and special porous photocatalytic systems, which tune the band gap, broaden the light response range, and facilitate the carrier separation.

Biocatalytic Cross-Coupling of Aryl Halides with a Genetically Engineered Photosensitizer Artificial Dehalogenase

Devising artificial photoenzymes for abiological bond-forming reactions is of high synthetic value but also a tremendous challenge. Disclosed herein is the first photobiocatalytic cross-coupling of aryl halides enabled by a designer artificial dehalogenase, which features a genetically encoded benzophenone chromophore and site-specifically modified synthetic Ni^II(bpy) cofactor with tunable proximity to streamline the dual catalysis. Transient absorption studies suggest the likelihood of energy transfer activation in the elementary organometallic event. This design strategy is viable to significantly expand the catalytic repertoire of artificial photoenzymes for useful organic transformations.

Cationic iridium complexes with an alkyl-linked bulky group at the cyclometalating ligand: synthesis, characterization, and suppression of phosphorescence concentration-quenching

Cationic iridium complexes with a bulky 2,2-diphenylethyl group at the cyclometalating ligand show remarkably suppressed phosphorescence concentration-quenching.

Green to blue-green-emitting cationic iridium complexes with a CF3-substituted phenyl-triazole type cyclometalating ligand: synthesis, characterization and their use for efficient light-emitting electrochemical cells

Green to blue-green-emitting cationic iridium complexes free of sp2 C-F bonds, namely [Ir(CF3-dPhTAZ)2(bpy)]PF6 (1), [Ir(CF3-dPhTAZ)2(dmebpy)]PF6 (2) and [Ir(CF3-dPhTAZ)2(phpyim)]PF6 (3), have been designed and synthesized with 3,4-diphenyl-5-(trifluoromethyl)-4H-1,2,4-triazole (CF3-dPhTAZ) as the cyclometalating ligand (C^N) and 2,2'-bipyridine (bpy), 4,4'-dimethyl-2,2'-bipyridine (dmebpy) or 2-(1-phenyl-1H-imidazol-2-yl)pyridine (phpyim) as the ancillary ligand (N^N). In CH3CN solution, complexes 1-3 afford green to blue-green emission centered at 521, 508 and 498 nm, respectively. The electron-withdrawing CF3 group attached at the triazole ring in CF3-dPhTAZ largely blue-shifts (by over 20 nm) the emission of the complex through stabilizing the highest occupied molecular orbital. In doped films, the complexes afford sky-blue emission with near-unity phosphorescent efficiencies. In neat films, the complexes show largely suppressed phosphorescence concentration-quenching, with phosphorescent efficiencies of up to 0.66. Theoretical calculations reveal that the emission of the complexes can arise from either charge-transfer (Ir → C^N/C^N → N^N) or C^N/N^N-centered 3π-π* states, depending on the local environment of the complexes. Solid-state light-emitting electrochemical cells (LECs) based on the complexes afford green to blue-green electroluminescence centered at 525, 517 and 509 nm, respectively, with high current efficiencies of up to 35.1 cd A-1. The work reveals that CF3-dPhTAZ is a promising C^N ligand free of sp2 C-F bonds for constructing efficient cationic iridium complexes with blue-shifted emission.

Visible-light-induced metal-free cascade cyclization of N-arylpropiolamides to 3-phosphorylated, trifluoromethylated and thiocyanated azaspiro[4.5]trienones

Photocatalytic strategies for the preparation of 3-functionalized azaspiro[4.5]trienones via a radical-initiated cascade annulation reaction was developed.

Crystal engineering strategies towards halogen-bonded metal–organic multi-component solids: salts, cocrystals and salt cocrystals

This highlight presents an overview of the current advances in the preparation of halogen bonded metal–organic multi-component solids, including salts and cocrystals comprising neutral and ionic constituents.

Bis-Tridendate Ir(III) Polymer-Metallocomplexes: Hybrid, Main-Chain Polymer Phosphors for Orange-Red Light Emission

In this work, hybrid polymeric bis-tridentate iridium(III) complexes bearing derivatives of terpyridine (tpy) and 2,6-di(phenyl) pyridine as ligands were successfully synthesized and evaluated as red-light emitters. At first, the synthesis of small molecular bis-tridendate Ir(III) complexes bearing alkoxy-, methyl-, or hydroxy-functionalized terpyridines and a dihydroxyphenyl-pyridine moiety was accomplished. Molecular complexes bearing two polymerizable end-hydroxyl groups and methyl- or alkoxy-decorated terpyridines were copolymerized with difluorodiphenyl-sulphone under high temperature polyetherification conditions. Alternatively, the post-polymerization complexation of the terpyridine-iridium(III) monocomplexes onto the biphenyl-pyridine main chain homopolymer was explored. Both cases afforded solution-processable metallocomplex-polymers possessing the advantages of phosphorescent emitters in addition to high molecular weights and excellent film-forming ability via solution casting. The structural, optical, and electrochemical properties of the monomeric and polymeric heteroleptic iridium complexes were thoroughly investigated. The polymeric metallocomplexes were found to emit in the orange-red region (550-600 nm) with appropriate HOMO and LUMO levels to be used in conjunction with blue-emitting hosts. By varying the metal loading on the polymeric backbone, the emitter's specific emission maxima could be successfully tuned.

In Pursuit of Panchromatic Absorption in Metal Coordination Complexes: Experimental Delineation of the HOMO Inversion Model Using Pseudo-Octahedral Complexes of Diarylamido Ligands

The ability of a compound to broadly absorb light across the incident solar spectrum is an important design target in the development of molecular photosensitizers. The 'HOMO inversion' model predicts that for [(tpy)₂Fe]²⁺ (tpy = 2,2':6',2″-terpyridine) compounds, adjusting the character of the highest occupied molecular orbital (HOMO) from metal-centered to ligand-centered can drastically improve photophysical properties by broadening absorption in the visible and increasing molar extinction coefficients. In an effort to experimentally realize strong, panchromatic absorption, a tridentate N^N^-^N diarylamido ligand bearing flanking benzannulated N-heterocyclic donors (^tBuL) was used to prepare deeply colored, pseudo-octahedral coordination complexes of a range of first-row transition and main-group metals [(^tBuL)₂M^0/+; M = Fe, Co, Ni, Zn, Ga]. While the Fe(II) congener exhibits the sought-after broad absorption, isostructural and isoelectronic complexes of other first-row transition and main-group metals show vastly different absorption and redox properties. Density functional theory (DFT) calculations point toward the relative energies of the metal d orbitals and ligand orbitals as the source of major changes in electronic structure, confirming aspects and limitations of the predictive 'HOMO inversion' model in experimentally realized systems with implications for the design of abundant transition-metal sensitizers with broad, panchromatic absorptive properties.