The Role of Ru Redox in pH-Dependent Oxygen Evolution on Rutile Ruthenium Dioxide Surfaces

Climbing with support: scaling the volcano relationship through support–electrocatalyst interactions in electrodeposited RuO2 for the oxygen evolution reaction

The interfacial charge transfer and support-induced electrocatalyst faceting in thin catalysts enable ‘climbing up’ the volcano map for OER electrocatalysts. The conductivity of the support determines the OER activity of thick catalysts.

Metal–organic frameworks and their derivatives as electrocatalysts for the oxygen evolution reaction

This review summarizes the recent progress on MOFs and their derivatives used for OER electrocatalysis in terms of their morphology, composition and structure–performance relationship.

NiMn-Based Bimetal-Organic Framework Nanosheets Supported on Multi-Channel Carbon Fibers for Efficient Oxygen Electrocatalysis

Developing noble-metal-free bifunctional oxygen electrocatalysts is of great significance for energy conversion and storage systems. Herein, we have developed a transformation method for growing NiMn-based bimetal-organic framework (NiMn-MOF) nanosheets on multi-channel carbon fibers (MCCF) as a bifunctional oxygen electrocatalyst. Owing to the desired components and architecture, the MCCF/NiMn-MOFs manifest comparable electrocatalytic performance towards oxygen reduction reaction (ORR) with the commercial Pt/C electrocatalyst and superior performance towards oxygen evolution reaction (OER) to the benchmark RuO₂ electrocatalyst. X-ray absorption fine structure (XAFS) spectroscopy and density functional theory (DFT) calculations reveal that the strong synergetic effect of adjacent Ni and Mn nodes within MCCF/NiMn-MOFs effectively promotes the thermodynamic formation of key *O and *OOH intermediates over active NiO₆ centers towards fast ORR and OER kinetics.

CoNiFe Layered Double Hydroxide/RuO2.1 Nanosheet Superlattice as Carbon-Free Electrocatalysts for Water Splitting and Li-O2 Batteries

Efficient electrocatalysts are highly demanded for oxygen evolution reaction (OER) in water splitting and metal-air batteries. Here, superlattice structured materials composed of CoNiFe layered double hydroxide (LDH)/ruthenium oxide nanosheets are synthesized as carbon-free electrocatalysts for OER. The positively charged CoNiFe LDH and negatively charged RuO_2.1 are alternately stacked at the molecular level into superlattice-like hybrids by electrostatic interaction upon mixing their dispersions under suitable conditions. Such heterostructured composites are found to act as effective catalysts toward OER of water splitting with a small overpotential of 281 mV and Tafel plot of 48.9 mV/decade. Such composites also serve as efficient carbon-free cathode catalysts for aprotic Li-O₂ batteries with remarkable higher specific capacities and lower overvoltages than RuO₂ nanoparticles. The superior performance may be attributed to the peculiar superlattice structure, resulting in strong interfacial electronic coupling, better electrical conductivity, and the suppression of side reactions caused by traditional carbon-based materials. Furthermore, potential difference between RuO_2.1 and CoNiFe LDH nanosheets is observed directly by scanning Kelvin probe microscopy, indicating that electrostatic fields might be induced in the superlattice structures to benefit the transport of electrons and charged ions as well as the catalytic process.

Selective single-atom electrocatalysts: a review with a focus on metal-doped covalent triazine frameworks

Single-atom electrocatalysts (SACs), which comprise singly isolated metal sites supported on heterogeneous substrates, have attracted considerable recent attention as next-generation electrocatalysts for various key reactions from the viewpoint of the environment and energy. Not only electrocatalytic activity but also selectivity can be precisely tuned via the construction of SACs with a defined coordination structure, such as homogeneous organometallics. Covalent organic frameworks (COFs) are promising supports for single-atom sites with designed coordination environments due to their unique physicochemical properties, which include porous structures, robustness, a wide range of possible designs, and abundant heteroatoms to coordinate single-metal sites. The rigid frameworks of COFs can hold unstable single-metal atoms, such as coordinatively unsaturated sites or easily aggregated Pt-group metals, which exhibit unique electrocatalytic selectivity. This minireview summarizes recent advances in the selective reactions catalysed by SACs, mainly those supported on triazine-based COFs.

Single-atom electrocatalysts (SACs) have attracted considerable attention as selective electrocatalysts. Metal-doped covalent triazine frameworks will be a novel platform for selective SACs to solve energy and environmental issues.

Plasma-Deposited Ru-Based Thin Films for Photoelectrochemical Water Splitting

Plasma-enhanced chemical vapor deposition (PECVD) was used to produce new Ru-based thin catalytic films. The surface molecular structure of the films was examined by X-ray photoelectron spectroscopy (XPS). To determine the electro- and photoelectrochemical properties, the oxygen evolution reaction (OER) process was investigated by linear sweep voltammetry (LSV) at pH = 13.6. It was found that Ru atoms were mainly in the metallic state (Ru0) in the as-deposited films, whereas after the electrochemical stabilization, higher oxidation states, mainly Ru+4 (RuO2), were formed. The stabilized films exhibited high catalytic activity in OER—for the electrochemical process, the onset and η10 overpotentials were approx. 220 and 350 mV, respectively, while for the photoelectrochemical process, the pure photocurrent density of about 160 mA/cm2 mg was achieved at 1.6 V (vs. reversible hydrogen electrode (RHE)). The plasma-deposited RuOX catalyst appears to be an interesting candidate for photoanode material for photoelectrochemical (PEC) water splitting.

Modeling interfacial electrochemistry: concepts and tools

This paper presents a grand canonical formalism and provides tools to investigate electrochemical effects at interfaces.

Undesired Bulk Oxidation of LiMn2 O4 Increases Overpotential of Electrocatalytic Water Oxidation in Lithium Hydroxide Electrolytes

Chemical and structural changes preceding electrocatalysis obfuscate the nature of the active state of electrocatalysts for the oxygen evolution reaction (OER), which calls for model systems to gain systematic insight. We investigated the effect of bulk oxidation on the overpotential of ink-casted LiMn2 O4 electrodes by a rotating ring-disk electrode (RRDE) setup and X-ray absorption spectroscopy (XAS) at the K shell core level of manganese ions (Mn-K edge). The cyclic voltammogram of the RRDE disk shows pronounced redox peaks in lithium hydroxide electrolytes with pH between 12 and 13.5, which we assign to bulk manganese redox based on XAS. The onset of the OER is pH-dependent on the scale of the reversible hydrogen electrode (RHE) with a Nernst slope of -40(4) mV/pH at -5 μA monitored at the RRDE ring. To connect this trend to catalyst changes, we develop a simple model for delithiation of LiMn2 O4 in LiOH electrolytes, which gives the same Nernst slope of delithiation as our experimental data, i. e., 116(25) mV/pH. From this data, we construct an ERHE -pH diagram that illustrates robustness of LiMn2 O4 against oxidation above pH 13.5 as also verified by XAS. We conclude that manganese oxidation is the origin of the increase of the OER overpotential at pH lower than 14 and also of the pH dependence on the RHE scale. Our work highlights that vulnerability to transition metal redox may lead to increased overpotentials, which is important for the design of stable electrocatalysts.

Boosting oxygen evolution of single-atomic ruthenium through electronic coupling with cobalt-iron layered double hydroxides

Single atom catalyst, which contains isolated metal atoms singly dispersed on supports, has great potential for achieving high activity and selectivity in hetero-catalysis and electrocatalysis. However, the activity and stability of single atoms and their interaction with support still remains a mystery. Here we show a stable single atomic ruthenium catalyst anchoring on the surface of cobalt iron layered double hydroxides, which possesses a strong electronic coupling between ruthenium and layered double hydroxides. With 0.45 wt.% ruthenium loading, the catalyst exhibits outstanding activity with overpotential 198 mV at the current density of 10 mA cm^-2 and a small Tafel slope of 39 mV dec^-1 for oxygen evolution reaction. By using operando X-ray absorption spectroscopy, it is disclosed that the isolated single atom ruthenium was kept under the oxidation states of 4+ even at high overpotential due to synergetic electron coupling, which endow exceptional electrocatalytic activity and stability simultaneously.

Cobalt Oxide Materials for Oxygen Evolution Catalysis via Single-Source Precursor Chemistry

The utilization of metal alkoxides as single-source precursors for (mixed-)oxide materials offers remarkable benefits, such as the possibility to precisely control the metal ratio in the resulting material, highly homogeneous distribution of the elements in the film, and the low temperatures required for film processing. Herein we report on the isolation and characterization of the bimetallic Co-Mo alkoxide [Co₃ Mo₄ O₁₀ (OCH₃ )₁₀ (dmf)₄ ] (Co₃ Mo₄ ; dmf=N,N-dimethylformamide), which was prepared by the anion metathesis reaction of the corresponding metal chlorides. The Co-Mo alkoxide was explored as a well-defined precursor of cobalt oxide catalysts for the oxygen evolution reaction (OER) in alkaline electrolyte MOH. The catalysts demonstrated excellent activity in the OER, manifested in low onset potentials and Tafel slopes and superb stability under the operating conditions both in alkaline and nearly neutral media. It was observed that the nature of the metal cation of the alkaline electrolyte MOH (M⁺ =Li⁺ , Na⁺ , K⁺ , Cs⁺ ) greatly affected the catalytic performance of the material. We propose that the positive effect of larger metal cations on the film activity in the OER could be explained by the higher hydration enthalpies of larger ions and enhanced mass transport within a larger interlayer space between the [CoO₂ ]^δ-_∞ sheets of the in situ formed binary oxides. It may be deduced that this trend is universal and may be extended to other types of metal oxides forming layered structures during the OER.

Atomic Iridium Incorporated in Cobalt Hydroxide for Efficient Oxygen Evolution Catalysis in Neutral Electrolyte

Developing highly efficient catalysts for oxygen evolution reaction (OER) in neutral media is extremely crucial for microbial electrolysis cells and electrochemical CO₂ reduction. Herein, a facile one-step approach is developed to synthesize a new type of well-dispersed iridium (Ir) incorporated cobalt-based hydroxide nanosheets (nominated as CoIr) for OER. The Ir species as clusters and single atoms are incorporated into the defect-rich hydroxide nanosheets through the formation of rich Co-Ir species, as revealed by systematic synchrotron radiation based X-ray spectroscopic characterizations combining with high-angle annular dark-field scanning transmission electron microscopy measurement. The optimized CoIr with 9.7 wt% Ir content displays highly efficient OER catalytic performance with an overpotential of 373 mV to achieve the current density of 10 mA cm^-2 in 1.0 m phosphate buffer solution, significantly outperforming the commercial IrO₂ catalysts. Further characterizations toward the catalyst after undergoing OER process indicate that unique Co oxyhydroxide and high valence Ir species with low-coordination structure are formed due to the high oxidation potentials, which authentically contributes to superior OER performance. This work not only provides a state-of-the-art OER catalyst in neutral media but also unravels the root of the excellent performance based on efficient structural identifications.

The Redox Chemistry of Ruthenium Dioxide: A Cyclic Voltammetry Study—Review and Revision

By cyclic voltammetry at high scan rates, the electrochemical properties of RuO2 in acidic and alkaline solutions were investigated in detail. Thirteen current peaks can be distinguished in sulfuric acid and sodium hydroxide. With respect to the pH sensitivity of RuO2 electrodes, we considered charge calculations, peak currents, and apparent diffusion coefficients. The nature of the Ru(II) oxidation was clarified by Ru(I)−Ru(III) species.

Ru atom-modified covalent triazine framework as a robust electrocatalyst for selective alcohol oxidation in aqueous electrolytes

This work demonstrates that a single Ru atom-modified covalent triazine framework (Ru-CTF) has selectivity for the electrooxidation of benzyl alcohol in water over the oxygen evolution reaction. Additionally, Ru-CTF displayed higher stability than an immobilized Ru-organometallic complex due to the covalently cross-linked structure of CTF.