Non-covalent capillary coatings for protein separations in capillary electrophoresis

Capillary coating as an important factor in optimization of the off-line and on-line MEKC assays of the highly hydrophobic enzyme chlorophyllase

The choice between bare and coated capillaries is a key decision in the development and use of any methods based on capillary electrophoresis. In this work several permanently and dynamically coated capillaries were successfully implemented in a previously developed micellar electrokinetic chromatography (MEKC) assay of the plant membrane enzyme chlorophyllase. The results obtained demonstrate the rationale behind the use of capillary coating, which is crucial for successful optimization of both the off-line mode and the on-line/electrophoretically mediated microanalysis assay mode. The application of an amine permanently coated capillary (eCAP) is a simple way to significantly increase the repeatability of migration times and peak areas, and to ensure a strong electroosmotic flow that considerably decreases the overall analysis time. A dynamic coating (CEofix) allows one to apply an on-line incubation to control the reaction progress inside the capillary, and to increase the signal-to-noise ratio and peak efficiency. The dynamic coating is possible with use of both the normally applied uncoated silica capillary and the precoated amine capillary, which ensures more repeatable migration times. The strong points of the uncoated silica capillary are its attractive price and wide range of pH that can be applied. The characteristics presented may simplify the choice of capillary modification, especially in the case of hydrophobic analytes, MEKC-based separations, and other enzymatic assays.

Glycoform analysis of alpha1-acid glycoprotein by capillary electrophoresis

A relatively fast and reproducible CE separation was developed for the glycoform analysis of α1-acid glycoprotein (AGP). Factors that were considered included the pH for this separation and various techniques for coating the capillary and/or to minimize electroosmotic flow and protein adsorption. Optimum resolution of the AGP glycoforms was obtained at pH 4.2 with a running buffer containing 0.1% Brij 35 and by using static and dynamic coatings of PEO on the capillary. These conditions made it possible to separate nine AGP glycoform bands in about 20min. The limit of detection (based on absorbance measurements) ranged from 0.09 to 0.38μM for these AGP glycoform bands, and the linear range extended up to a total AGP concentration of at least 240μM. The migration times for the glycoform bands had typical within-day and day-to-day precisions of ±0.16-0.23% or less, respectively, on a single treated capillary and the variation between capillaries was ±0.56% or less. A charge ladder approach was employed to examine the mass or charge differences in the glycoforms that made up these bands, giving a good fit to a model in which the neighboring bands differed by one charge (e.g., from a sialic acid residue) and had an average mass difference of approximately 0.7-0.9kDa. The approaches used to develop this separation method are not limited to AGP but could be extended to the analysis of other glycoproteins by CE.

A fully automated linear polyacrylamide coating and regeneration method for capillary electrophoresis of proteins

Surface modification of the inner capillary wall in CE of proteins is frequently required to alter EOF and to prevent protein adsorption. Manual protocols for such coating techniques are cumbersome. In this paper, an automated covalent linear polyacrylamide coating and regeneration process is described to support long-term stability of fused-silica capillaries for protein analysis. The stability of the resulting capillary coatings was evaluated by a large number of separations using a three-protein test mixture in pH 6 and 3 buffer systems. The results were compared to that obtained with the use of bare fused-silica capillaries. If necessary, the fully automated capillary coating process was easily applied to regenerate the capillary to extend its useful life-time.

Open tubular-capillary electrochromatography: Developments and applications from 2013 to 2015

Open tubular CEC (OT-CEC) separates analyte mixtures by a combination of electrophoretic, electro-osmotic, and/or chromatographic effects. OT-CEC research is an active and growing field, with studies encompassing a wide range of investigations related to new strategies for chemical modification of the inner surface of the capillary, leading to the introduction of novel stationary phase coatings. This review has examined the literature on OT-CEC from 2013 to August 2015 and highlights the developments in the fabrication of highly selective stationary phases, based on materials that include cyclodextrin chiral selectors, graphene and graphene oxide, metal-organic frameworks, molecularly imprinted polymers, nanoparticles, nanolatex particles, nanocomposites, in situ generated polymers, block polymers, tentacle-type polymers, polyelectrolyte multilayers, polysaccharides, phospholipids, and proteins. This review, while considering the development of novel OT-CEC coating materials, specifically examines different immobilization or coating methodologies and approaches and also discusses the separation mechanisms that occur with these new materials. These OT-CEC coatings are intended mainly to separate low molecular weight molecules relevant to the pharmaceutical, agricultural, and food industries as well as for use in environmental monitoring.

Poly(N,N-Dimethylacrylamide)-Based Coatings to Modulate Electroosmotic Flow and Capillary Surface Properties for Protein Analysis

Capillary electrophoresis (CE) is one of the most powerful techniques for the separation of biomolecules. However, the separation efficiency of proteins in CE is often compromised by their tendency to interact with the silanol groups on the surface of the inner capillary and by an uncontrolled electroosmotic flow. Herein, we report on the use of novel hydrophilic polymeric coatings that can modulate the properties of the capillary walls. The novelty of these poly(N,N-dimethylacrylamide)-based copolymers relies on the simultaneous presence of chemically reactive groups (N-acryloyloxysuccinimide and glycidyl methacrylate) and silane groups in the backbone, which results in highly stable films due to the covalent reaction between the polymer and the glass silanols. A careful optimization of monomer concentration confers anti-fouling properties to the polymer coatings, and thus allows for highly efficient acidic and alkaline protein separations. Furthermore, the presence of these monomers makes it possible to modulate the electroosmotic flow from negligible to reduced values, depending on the desired application.

Separation of dynorphin peptides by capillary electrochromatography using a polydiallyldimethylammonium chloride gold nanoparticle-modified capillary

Dynorphin A (Dyn A) is an endogenous opioid peptide found in blood and central nervous system tissue at very low concentrations. Elevated levels of Dyn A due to different disease states, for example neurodegenerative disease, have been linked to toxic nonopioid activity. CE is a powerful technique that can achieve high-efficiency separations of charged analytes. However, CE has limited use for the analysis of basic proteins and peptides, due to their adsorption onto the inner surface of the fused silica at pHs below their pI. This adsorption can lead to a loss of efficiency, irreproducibility of migration times, and peak tailing. To obviate this problem, a polydiallyldimethylammonium chloride-stabilized gold nanoparticle-coated capillary was investigated for the separation of dynorphin metabolites. The positively charged gold nanoparticles (GNP) minimized unwanted adsorption of the positively charged peptides onto the surface of the fused-silica capillary. Separation efficiency and resolution for opioid peptides Dyn A (1-6), Dyn A (1-7), Dyn A (1-8), Dyn A (1-11), and leu-enkephalin on the GNP-coated capillary column were evaluated under different experimental parameters. The best separation of Dyn A (1-17) and its fragments was achieved using a BGE that consists of 40 mM sodium acetate buffer (pH 5) containing 5% GNP, a field strength of -306 V/cm, and a 75 μm id capillary. The developed method was applied to the separation of tryptic peptide fragments of dynorphin A (1-17).

Novel cationic coating agent for protein separation by capillary electrophoresis(†)

A novel positively charged surfactant N-dodecyl-N,N-dimethyl-(1,2-propandiol) ammonium chloride was used for the dynamic coating of the inner wall of a silica capillary. This paper covers the evaluation of dynamic coating and study of the influence of the analysis conditions for the magnitude and direction of electroosmotic flow as well as for the effective and selective separation of chosen proteins (ribonuclease A, cytochrome c, lysozyme, and myoglobin). The concentration of 0.1 mM of N-dodecyl-N,N-dimethyl-(1,2-propandiol) ammonium chloride enabled the reversal of the electro-osmotic flow, however, to separate basic as well as neutral proteins the higher concentration of the studied surfactant was necessary. The final conditions for the separation of studied proteins were set at 100 mM sodium acetate pH 5.5 with 10.0 mM of the studied surfactant. The results were also compared with those of two commercially available cationic surfactants, cetyltrimethylammonium bromide and dodecyltrimethylammonium bromide. Additionally, the developed method for protein separation was applied for the determination of lysozyme in a cheese sample. The limits of detection and quantification of lysozyme were 0.9 and 3.0 mg/L, respectively. The mean concentration of lysozyme found in the cheese sample was 167.3 ± 10.3 mg/kg.

Evaluation of three neutral capillary coatings for the determination of analyte-cyclodextrin binding constants by affinity capillary electrophoresis. Application to N,N'-disubstituted piperazine derivatives

The performances of three neutral static coatings (hydroxypropyl cellulose, polyethylene oxide and poly(N,N-dimethylacrylamide) have been evaluated in order to determine the binding constants of the complexes formed between four polycationic compounds (piperazine derivatives) and four cyclodextrins of pharmaceutical interest (β-CD, HP-β-CD, Me-β-CD and sulfobutyl ether-β-CD) by affinity capillary electrophoresis. The physically-adsorbed poly(N,N-dimethylacrylamide) coating proves to be the more efficient to mask the silanol groups of the capillary wall since the lowest electroosmotic flow was measured for this coating. Moreover, it drastically reduces the adsorption of the compounds since it allows a correct repeatability of their migration time, higher efficiencies of the peaks and no baseline shift. Then, it was verified for four complexes that this coating allows a correct determination of the binding constants avoiding the CD adsorption which is responsible of an undervaluation of binding constants. The highest binding constants are obtained using the anionic sulfobutyl ether-β-CD (SBE-β-CD). The structure of the complex formed between the tacrine derivative and the SBE-β-CD was further investigated through 2D ROESY NMR experiments and structure-binding constant relationships. Results suggest that the inclusion in the SBE-β-CD cavity occurs through the aliphatic ring portion of the tacrine moiety.

Mapping molecular adhesion sites inside SMIL coated capillaries using atomic force microscopy recognition imaging

Capillary zone electrophoresis (CZE) is a powerful analytical technique for fast and efficient separation of different analytes ranging from small inorganic ions to large proteins. However electrophoretic resolution significantly depends on the coating of the inner capillary surface. High technical efforts like Successive Multiple Ionic Polymer Layer (SMIL) generation have been taken to develop stable coatings with switchable surface charges fulfilling the requirements needed for optimal separation. Although the performance can be easily proven in normalized test runs, characterization of the coating itself remains challenging. Atomic force microscopy (AFM) allows for topographical investigation of biological and analytical relevant surfaces with nanometer resolution and yields information about the surface roughness and homogeneity. Upgrading the scanning tip to a molecular biosensor by adhesive molecules (like partly inverted charged molecules) allows for performing topography and recognition imaging (TREC). As a result, simultaneously acquired sample topography and adhesion maps can be recorded. We optimized this technique for electrophoresis capillaries and investigated the charge distribution of differently composed and treated SMIL coatings. By using the positively charged protein avidin as a single molecule sensor, we compared these SMIL coatings with respect to negative charges, resulting in adhesion maps with nanometer resolution. The capability of TREC as a functional investigation technique at the nanoscale was successfully demonstrated.

Metal cation control of electroosmotic flow magnitude in phospholipid-coated capillaries

CZE has become widespread for the separation and analysis of biomolecules such as proteins and peptides, due to factors such as, the speed of the separations, low sample volume, and high resolution associated with the technique. However, the separation of biomolecules by CZE does present a significant challenge due to the electrostatic attraction and adsorption of cationic, or cation containing, biomolecules to the capillary surface. To that end numerous methods have been developed to passivate, or protect the surface, in order to prevent the adsorption of analytes. Yet, in the process of protecting the capillary surface, the potential for further modification of the EOF, a factor crucial to effective analyte resolution, is greatly diminished. In seeking to overcome this limitation we have explored the potential of incorporating a range of metal cations into a phospholipid bilayer capillary coating. It has previously been established that the inclusion of calcium into the separation buffer with a phospholipid coating will reverse the EOF in the capillary. Here, we present our investigation of a broader range of metal cations included in the separation buffer (Ca(2+) , Mg(2+) , Co(2+) , Ni(2+) , Sr(2+) , Ba(2+) , and Ce(3+) ) revealing that the choice of metal cation can drastically influence the EOF, with observed values between -3.80 × 10(-4) and -5.74 × 10(-5) cm(2) /V·s.

Quality Control of Therapeutic Monoclonal Antibodies at the Hospital After Their Compounding and Before Their Administration to Patients

Monoclonal antibodies (mAbs) are widely used in cancer therapy and recently many new mAbs have gained EMA and FDA approvals for oncology indications. Here we describe a highly reproducible CZE method, relying on a cationic coating allowing separation and identification of a complex mixture of four compounded mAbs widely used in cancer therapy (cetuximab, rituximab, bevacizumab, and trastuzumab).

Capillary Zone Electrophoresis-Mass Spectrometry of Intact Proteins

Capillary electrophoresis (CE) coupled with mass spectrometry (MS) has proven to be a powerful analytical tool for the characterization of intact proteins. It combines the high separation efficiency, short analysis time, and versatility of CE with the mass selectivity and sensitivity offered by MS detection. This chapter focuses on important practical considerations when applying CE-MS for the analysis of intact proteins. Technological aspects with respect to the use of CE-MS interfaces and application of noncovalent capillary coatings preventing protein adsorption are treated. Critical factors for successful protein analysis are discussed and four typical CE-MS systems are described demonstrating the characterization of different types of intact proteins by CE-MS. These methodologies comprise the use of sheath-liquid and sheathless CE-MS interfaces, and various types of noncovalent capillary coatings allowing efficient and reproducible protein separations. The discussion includes the analysis of lysozyme-drug conjugates and the therapeutic proteins human growth hormone, human interferon-β-1a, and human erythropoietin.

Screening of Small Intact Proteins by Capillary Electrophoresis Electrospray Ionization-Mass Spectrometry (CE-ESI-MS)

Capillary electrophoresis (CE) has been shown to be a suitable separation technique for complex samples. Combined with electrospray ionization-mass spectrometry (ESI-MS), it is a powerful tool offering the opportunity of high selectivity and sensitivity combined with the possibility to identify and characterize intact proteins. In this protocol, we demonstrate a screening method for intact proteins based on capillary zone electrophoresis (CZE) separation coupled with online mass spectrometric detection. In order to avoid protein-wall interactions, a neutral coated capillary is used to create a universal method for proteins with both low and high electrophoretic mobilities. In addition, we show the successful validation and application of this screening method for a set of eight standard proteins and the glycoprotein erythropoietin.

Analysis of Somatropin by Double-Injection Capillary-Zone Electrophoresis in Polybrene/Chondroitin Sulfate A Double-Coated Capillaries

Purity determination of somatropin as a recombinant protein is important to ensure its safety and quality. This is carried out by capillary zone electrophoresis in double-injection mode using polybrene/chondroitin sulfate A double-coated capillaries. Modification of the capillary wall eliminates protein-wall interactions which results in improved accuracy and precision of the determinations. In the double-injection mode two somatropin samples are analyzed within a single electrophoretic run. Prior to the second injection, the first injected plug is electrophoresed for a predetermined time period in order to adjust the inter-plug distance. Here, the principle for the separation of somatropin charge variants is described.

Statically Adsorbed Coatings for High Separation Efficiency and Resolution in CE-MS Peptide Analysis: Strategies and Implementation

Coatings are necessary to prevent protein and peptide adsorption to the capillary surface and obtain high intermediate precision. In this protocol, we first present our basic strategy to address peptide separation using three different coatings: one neutral and two cationic coatings, the latter largely differing in their induced electroosmotic mobility. In detail, we will describe how we apply the statically adsorbed coatings to obtain very high plate numbers and high repeatability.With some model examples, we clearly describe the scope of the method for the analysis of peptide samples: tryptic digests are addressed as well as small glycoproteins and glycopeptides largely differing in their effective electrophoretic mobility. We also show that the method is suitable for a fast screening of peptide samples despite a high matrix load comprising of up to 500 mmol/L sodium chloride. We demonstrate that this basic CE-MS method is rather independent of the polarity of the analytes with a very fast near-baseline separation of very hydrophobic Aβ peptides related to the onset of Alzheimer's disease. These examples will give an impression, which coating is most suitable for a specific analytical application.Special attention is paid to difficult aspects of the coating procedure and the CE-MS method, e.g., the potential of cross-contamination when changing the coatings.

Capillary electrophoresis for rapid identification of monoclonal antibodies for routine application in hospital

mAbs are widely used in cancer therapy. Their compounding, performed just before their administration to patients, is executed in a production unit of the hospital. Identification of these drugs, individually prepared in bags for infusion before patient administration, is of paramount importance to detect potential mistakes during compounding stage. A fast and reliable analytical method based on CZE combined to a cationic capillary coating (hexadimethrine bromide) was developed for identification of the most widely used compounded therapeutic for cancer therapy (bevacizumab, cetuximab, rituximab, and trastuzumab). Considering the high structural and physico-chemical similarities of these mAbs, an extensive optimization of the BGE composition has been performed. The addition of perchlorate ions and polysorbate in the BGE greatly increased the resolution. To validate the method, an internal standard was used and the relative migration times (RTm) were estimated. Very satisfactory RSDs of the RTm for rituximab (0.76%), cetuximab (0.46%), bevacizumab (0.31%), and trastuzumab (0.60%) were obtained. The intraday and interday RSD of the method were less than 0.32 and 1.3%, respectively for RTm. Significant differences between theses RTms have been demonstrated allowing mAbs identification. Finally, accurate mAbs identification has been demonstrated by a blind test.

Controllable construction of micro/nanostructured NiO arrays in confined microchannels via microfluidic chemical fabrication for highly efficient and specific absorption of abundant proteins

The multiple micro/nanostructured NiO arrays constructed on the inner walls of the microchannels via a simple microfluidic chemical method exhibit highly efficient and specific absorption of abundant proteins.

Present state of microchip electrophoresis: state of the art and routine applications

Microchip electrophoresis (MCE) was one of the earliest applications of the micro-total analysis system (μ-TAS) concept, whose aim is to reduce analysis time and reagent and sample consumption while increasing throughput and portability by miniaturizing analytical laboratory procedures onto a microfluidic chip. More than two decades on, electrophoresis remains the most common separation technique used in microfluidic applications. MCE-based instruments have had some commercial success and have found application in many disciplines. This review will consider the present state of MCE including recent advances in technology and both novel and routine applications in the laboratory. We will also attempt to assess the impact of MCE in the scientific community and its prospects for the future.

Surface modification of PDMS microfluidic devices by controlled sulfuric acid treatment and the application in chip electrophoresis

Herein, we present a straightforward surface modification technique for PDMS-based microfluidic devices. The method takes advantage of the high reactivity of concentrated sulfuric acid to enhance the surface properties of PDMS bulk material. This results in alteration of the surface morphology and chemical composition that is in-depth characterized by ATR-FTIR, EDX, SEM, and XPS. In comparison to untreated PDMS, modified substrates exhibit a significantly reduced diffusive uptake of small organic molecules while retaining its low electroosmotic properties. This was demonstrated by exposing the channels of a microfluidic device to concentrated rhodamine B solution followed by fluorescence microscopy. The surface modification procedure was used to improve chip-based electrophoretic separations. Separation efficiencies of FITC-labeled amines/amino acids obtained in treated and untreated PDMS-devices as well as in glass chips were compared. We obtained higher efficiencies in H2 SO4 treated PDMS chips compared to untreated ones but lower efficiencies than those obtained in commercial microfluidic glass devices.

Recent advances in capillary electrophoretic migration techniques for pharmaceutical analysis

Since the introduction about 30 years ago, CE techniques have gained a significant impact in pharmaceutical analysis. The present review covers recent advances and applications of CE for the analysis of pharmaceuticals. Both small molecules and biomolecules such as proteins are considered. The applications range from the determination of drug-related substances to the analysis of counterions and the determination of physicochemical parameters. Furthermore, general considerations of CE methods in pharmaceutical analysis are described.