Thermal stability and structural changes of double-walled carbon nanotubes by heat treatment

Thermal stability of functionalized carbon nanotubes studied by in-situ transmission electron microscopy

The thermal stability of funtionalized carbon nanotubes (CNTs) has been studied experimentally by direct in-situ observations using a heating stage in a transmission electron microscope, from room temperature (RT) to about 1000 °C. It was found that the thermal stability of the functionalized CNTs was significantly reduced during the in-situ heating process. Their average diameter dramatically expanded from RT to about 500 °C, and then tended to be stable until about 1000 °C. The X-ray energy dispersive spectroscopy analysis suggested that the diameter expansion was associated with coalescence of the carbon structure instead of deposition with additional foreign elements during the heating process.

Tailoring temperature invariant viscoelasticity of carbon nanotube material

Using carbon nanotubes (CNTs) as building blocks, we fabricated a viscoelastic material. In contrast to existing conventional materials where the stiffness (storage modulus) increases when the viscosity (damping ratio) decreases, both of these two aspects could be simultaneously improved for the viscoelastic CNT material. This allows fabricating both strong and highly viscous materials. This unique phenomenon was explained by a zipping and unzipping of carbon nanotubes at contacts as the origin of viscoelasticity.

Thermal stability of carbon nanotubes probed by anchored tungsten nanoparticles

The thermal stability of multiwalled carbon nanotubes (CNTs) was studied in high vacuum using tungsten nanoparticles as miniaturized thermal probes. The particles were placed on CNTs inside a high-resolution transmission electron microscope equipped with a scanning tunneling microscope unit. The setup allowed manipulating individual nanoparticles and heating individual CNTs by applying current to them. CNTs were found to withstand high temperatures, up to the melting point of 60-nm-diameter W particles (∼3400 K). The dynamics of W particles on a hot CNT, including particle crystallization, quasimelting, melting, sublimation and intradiffusion, were observed in real time and recorded as a video. Graphite layers reel off CNTs when melted or premelted W particles revolve along the tube axis.

Double-walled carbon nanotubes: challenges and opportunities

Double-walled carbon nanotubes are coaxial nanostructures composed of exactly two single-walled carbon nanotubes, one nested in another. This unique structure offers advantages and opportunities for extending our knowledge and application of the carbon nanomaterials family. This review seeks to comprehensively discuss the synthesis, purification and characterization methods of this novel class of carbon nanomaterials. An emphasis is placed on the double wall physics that contributes to these structures' complex inter-wall coupling of electronic and optical properties. The debate over the inner-tube photoluminescence provides an interesting illustration of the rich photophysics and challenges associated with the myriad combinations of the inner and outerwall chiralities. Outerwall selective covalent chemistry will be discussed as a potential solution to the unattractive tradeoff between solubility and functionality that has limited some applications of single-walled carbon nanotubes. Finally, we will review the many different uses of double-walled carbon nanotubes and provide an overview of several promising research directions in this new and emerging field.

Multiwalled carbon nanotube filter: improving viral removal at low pressure

The effective removal of viruses by a multiwalled carbon nanotube (MWNT) filter is demonstrated over a range of solution chemistries. MS2 bacteriophage viral removal by the MWNT filter was between 1.5 and 3 log higher than that observed with a recently reported single-walled carbon nanotube (SWNT) filter when examined under similar loadings (0.3 mg/cm(2)) of carbon nanotubes (CNTs). The greater removal of viruses by the MWNT filter is attributed to a more uniform CNT-filter matrix that allows effective removal of viruses by physicochemical (depth) filtration. Viral removal by the MWNT filter was examined under a broad range of water compositions (ionic strength, monovalent and divalent salts, solution pH, natural organic matter, alginate, phosphate, and bicarbonate) and filter approach velocities (0.0016, 0.0044, and 0.0072 cm/s). Log viral removal increased as the fluid approach velocity decreased, exhibiting a dependence on approach velocity in agreement with colloid filtration theory for Brownian particles. Viral removal improved with increasing ionic strength (NaCl), from 5.06 log removal at 1 mM NaCl to greater than 6.56 log removal at 100 mM NaCl. Addition of calcium ions also enhanced viral removal, but the presence of magnesium ions resulted in a decrease in viral removal. Solution pH also played an important role in viral removal, with log removals of 8.13, 5.38, and 4.00 being documented at solution pH values of 3.0, 5.5, and 9.0, respectively. Dissolved natural organic matter (NOM) had a negligible effect on viral removal at low concentration (1 mg/L), but higher concentrations of NOM significantly reduced the viral removal by the MWNT filter, likely due to steric repulsion. Addition of alginate (model polysaccharide) also caused a marked decrease in viral removal by the MWNT filter. This highly scalable MWNT-filter technology at gravity-driven pressures presents new, cost-effective options for point-of-use filters for viral removal.

Wall-to-wall stress induced in (6,5) semiconducting nanotubes by encapsulation in metallic outer tubes of different diameters: a resonance Raman study of individual C60-derived double-wall carbon nanotubes

We measure resonant Raman scattering from 11 individual C(60)-derived double-wall carbon nanotubes all having inner semiconducting (6,5) tubes and various outer metallic tubes. The Raman spectra show the radial breathing modes (RBM) of the inner and the outer tubes to be simultaneously in resonance with the same laser energy. We observe that an increase in the RBM frequency of the inner tubes is related to an increase in the RBM frequency of the outer tubes. The Raman spectra also contain a sharp G(-) feature that increases in frequency as the nominal diameter of the outer metallic tubes decreases. Finally, the one-phonon second-order D-band mode shows a two-way frequency splitting that decreases with decreasing nominal wall-to-wall distance. We suggest that the stress which increases with decreasing nominal wall-to-wall distance is responsible for the hardening that is observed in the frequencies of the RBM, D and G(-) modes of the inner (6,5) semiconducting tubes.

Raman and fluorescence spectroscopic studies of a DNA-dispersed double-walled carbon nanotube solution

We performed resonant Raman/fluorescence spectroscopic studies on double-walled carbon nanotubes (DWNTs) that were dispersed in an aqueous single stranded DNA solution. The luminescence signals from the inner tubes of DWNTs are intensified in the isolated state of each individual DWNT. The completely depressed radial breathing modes (RBMs) associated with the outer tubes (whether semiconducting or metallic) via the mechanical wrapping and the strong charge transfer between DNA and the outer tubes support our interpretation that the bright luminescence and sharp absorption spectra come from only the inner tubes, and not from isolated SWNTs. The circumferentially wrapped DNA on the outer tubes of individually isolated DWNTs in an aqueous solution gives rise to strong charge transfer to the semiconducting and metallic outer tubes as well as to generating physical strain in the outer tubes.

Oxidative purification of carbon nanotubes and its impact on catalytic performance in oxidative dehydrogenation reactions

Oxidative purification with mild diluted HNO3 followed by NaOH washing lowers the amount of amorphous carbon attached to multiwalled carbon nanotubes (CNTs). The graphitic structure improves remarkably by further annealing in argon at elevated temperatures, that is, 1173, 1573, and 1973 K. The influence of the purification treatment on the catalytic activity of the CNTs is investigated for the oxidative dehydrogenation (ODH) of ethylbenzene and propane as probe reactions. All samples tend to approach an appropriately ordered structure and Raman analysis of the used samples displays a D/G band ratio of 0.95-1.42. Oxygen functionalities are partly removed by the annealing treatment and can be rebuilt to some extent by oxygen molecules in the ODH reactant flow. The presence of amorphous carbon is detrimental to the catalytic performance as it allows for unwanted functional groups occurring in parallel with the formation of the selective (di)ketonic active sites.

Testing the resistance of single- and multi-walled carbon nanotubes to chemothermal oxidation used to isolate soots from environmental samples

Quantification of natural and engineered carbon nanotubes (CNT) in the environment is urgently needed to study their occurrence and fate and to enable a proper risk assessment. Currently, such methods are lacking. Here, we tested the resistance of 15 structurally different CNTs to chemothermal oxidation at 375 degrees C (CTO-375), a method used to isolate soots from environmental samples. Depending on their structure, CNTs survived CTO-375 in proportions ranging from 26 to 93%. Standard addition of CNTs to soil and sediment yielded recoveries between 66 and 171%, demonstrating the capability of CTO-375 to isolate CNTs from complex environmental matrices. These data of pure and added CNTs correspond to recoveries obtained with "ordinary" soots under similar experimental conditions. Hence, soot fractions commonly isolated with CTO-375 from environmental matrices most probably encompass CNTs. Future work should attempt to enhance the method's selectivity, i.e., its capability to separate CNTs from other forms of soot.

Selective optical property modification of double-walled carbon nanotubes by fluorination

We found that by fluorination of double-walled carbon nanotubes (DWNTs), it is possible to suppress only the Raman radial breathing mode and absorption peaks from the outer (large diameter) tubes of DWNTs. In contrast, Raman signals from the inner shells showed no difference from the pristine DWNTs. The stability of the inner shells of fluorinated DWNTs was also confirmed from the photoluminescence (PL) map and the optical absorption spectra, which only showed the signals from the inner shells of DWNTs, with no distinct change in the optical properties of the inner tubes after fluorination. Our results indicate that once fluorinated, there exists only a weak, if not none, interaction between the inner tube and the outer fluorinated tube, proving that fluorination can be used to suppress the optical properties of carbon nanotubes without interfering the properties of inner tubes. The present finding can be important in electronic and sensor applications, keeping the inner tube from having unwanted contact with other substances that may distract from the inner tube's own characteristics.

Nanoscale fracture mechanics

Theoretical calculations on undefected nanoscale materials predict impressive mechanical properties. In this review we summarize the status of experimental efforts to directly measure the fracture strengths of inorganic and carbon nanotubes and discuss possible explanations for the deviations between the predicted and observed values. We also summarize the role of theory in understanding the molecular-level origin of these deviations. In particular, we consider the role of defects such as vacancies, Stone-Wales defects, adatoms and ad-dimers, chemical functionalization, and oxidative pitting.

Efficient H2Adsorption by Nanopores of High-Purity Double-Walled Carbon Nanotubes

DWNT buckypaper adsorbed much more hydrogen than did a SWNT bundle. XRD measurements and GCMC simulation results suggested that the DWNT bundle is loosely packed into an hexagonal array with interstitial pores which can efficiently adsorb H2 molecules.

Thermal conversion of bundled carbon nanotubes into graphitic ribbons

High temperature heat treatment (HTT) of bundled single-walled carbon nanotubes (SWNTs) in vacuum ( approximately 10(-5) Torr) has been found to lead to the formation of two types of graphitic nanoribbons (GNRs), as observed by high-resolution transmission electron microscopy. Purified SWNT bundles were first found to follow two evolutionary steps, as reported previously, that is, tube coalescence (HTT approximately 1400 degrees C) and then massive bond rearrangement (HTT approximately 1600 degrees C), leading to the formation of bundled multiwall nanotubes (MWNTs) with 3-12 shells. At HTT > 1800 degrees C, we find that these MWNTs collapse into multishell GNRs. The first type of GNR we observed is driven by the collapse of diameter-doubled single-wall nanotubes, and their production is terminated at HTT approximately 1600 degrees C when the MWNTs also start to form. We propose that the collapse is driven by van der Waals forces between adjacent tubes in the same bundle. For HTT > 2000 degrees C, the heat-treated material is found to be almost completely in the multishell GNR form.

Fluorination of double-walled carbon nanotubes

Fluorine atoms are selectively attached to the sidewall of the outer shell of DWNTs without disrupting the double-layered morphology; the stoichiometry of the fluorinated DWNTs is CF(0.30).