Microalgal-based biopolymer for nano- and microplastic removal: a possible biosolution for wastewater treatment

Biopolymer-based flocculants: a review of recent technologies

Biopolymer-based flocculants have become a potential substitute for inorganic coagulants and synthetic organic flocculants due to their wide natural reserves, environmental friendliness, easy natural degradation, and high material safety. In recent years, with more and more attention to clean technologies, a lot of researches on the modification and application of biopolymer-based flocculants have been carried out. The present paper reviews the latest important information about the base materials of biopolymer-based flocculants, including chitosan, starch, cellulose, and lignin etc. This review also highlights the various modification methods of these base materials according to reaction types in detail. Via the recent researches, the flocculation mechanisms of biopolymer-based flocculants, such as adsorption, bridging, charge neutralization, net trapping, and sweeping, as well as, some other special mechanisms are comprehensively summarized. This paper also focuses on the water treatment conditions, the removal efficiency, and advantages of biopolymer-based flocculants in applications. Further, this review sheds light on the future perspectives of biopolymer-based flocculants, which may make progress in the sources of base materials, modification processes, multi-function, and deepening application researches. We believe that this review can guide the further researches and developments of biopolymer-based flocculants in the future, to develop them with a higher efficiency, a lower cost, more safety, and multi-function for more diversified applications. Graphical abstract.

Contribution of bacterial extracellular polymeric substances (EPS) in surface water purification

Naturally present aquatic microorganisms play an important role in water purification systems, such as the self-purification of surface waters. In this study, two water sources representing polluted surface water (Olympic Green; OG) and unpolluted surface water (Jingmi river; JM), were used to explore the self-purification of surface water by bacteria under different environmental conditions. The dominant bacterial community of OG and JM waters (both are Firmicutes and Proteobacteria) were isolated, cultured, and then used to carry out flocculation tests. Results showed that the flocculation ability of the dominant bacteria and extracellular polymeric substances (EPS) obtained from OG isolation was significantly greater than that from JM. Further examination illustrated that the main components of EPS were polysaccharides, which played an important role in improving the flocculation ability of bacteria. EPS from dominant cultural bacteria strains (OG1 and JM3) isolated from the two different sources lacked hydrophilic groups (e.g. COOH) and had a networked structure which are the main reasons to enhance the flocculation ability. The bacterial diversity and redundancy analysis (RDA) results also showed that microbial community composition is determined by water quality (SS, TOC, and NH₄⁺), and different Bacteroidetes, Actinobacteria and Proteobacteria community structures can improve the water body's ability to remove environmental pollutants (such as SS, humic acid and fulvic acid). These findings provide new information showing how bacterial communities change with environmental factors while maintaining the purity of surface water.

The Potential for PE Microplastics to Affect the Removal of Carbamazepine Medical Pollutants from Aqueous Environments by Multiwalled Carbon Nanotubes

Microplastics are ubiquitous in aquatic environments and interact with other kinds of pollutants, which affects the migration, transformation, and fate of those other pollutants. In this study, we employ carbamazepine (CBZ) as the contaminant to study the influence of polyethylene (PE) microplastics on the adsorption of CBZ pollutants by multiwalled carbon nanotubes (MCNTs) in aqueous solution. The adsorption capacity of CBZ by MCNTs in the presence of PE microplastics was obviously lower than that by MCNTs alone. The influencing factors, including the dose of microplastics, pH, and CBZ solution concentration, on the adsorption of CBZ by MCNTs and MCNTs-PE were thoroughly investigated. The adsorption rate of CBZ by MCNTs decreased from 97.4% to 90.6% as the PE microplastics dose increased from 2 g/L to 20 g/L. This decrease occurred because the MCNTs were coated on the surface of the PE microplastics, which further decreased the effective adsorption area of the MCNTs. This research provides a framework for revealing the effect of microplastics on the adsorption of pollutants by carbon materials in aqueous environments.

From source to sink: Review and prospects of microplastics in wetland ecosystems

The source, distribution, migration, and fate of microplastics (MPs) in aquatic and terrestrial ecosystems have received much attention. However, the relevant reports in wetland ecosystems, the boundary area between water and land, are still rare. Where are the sources and sinks of MPs in the wetland? The latest researches have shown that the sources of MPs in wetlands include sewage discharge, surface runoff, and plastic wastes from aquaculture. Fibers and fragments are the most common shapes, and PE, PP, PS can be detected in water or sediment matrices, and biota of wetlands. The distribution is affected by hydrodynamic conditions, sediment properties, and vegetation coverage. Factors affecting the vertical migration of MPs include their own physical and chemical properties, the combination of substances that accelerate deposition (mineral adsorption and biological flocculation), and resuspension. Minerals tend to adsorb negatively charged MPs while algae aggregates have a preference for positively charged MPs. The wetlands vegetation can trap MPs and affect their migration. In water matrices, MPs are ingested by organisms and integrated into sediments, which makes them seem undetectable in the wetland ecosystem. Photodegradation and microbial degradation can further reduce the MPs in size. Although recent research has increased, we are still searching for a methodological harmonization of the detection practices and exploring the migration rules and fate patterns of MPs. Our work is the first comprehensive review of the source, distribution, migration, and fate of MPs in wetland ecosystems. It reveals the uniqueness of wetland habitat in the research of MPs and indicates the potential of wetlands acting as sources or sinks for MPs.

Do membrane filtration systems in drinking water treatment plants release nano/microplastics?

Drinking water treatment plants (DWTPs) are thought to be able to remove many micropollutants including nanoplastics (NPs) and microplastics (MPs). However, few studies have focused on the water treatment process itself producing NPs and/or MPs. This paper discussed the possibility of releasing NPs and MPs from organic membranes in drinking water treatment plants. The effects of physical cleaning, chemical agents, mechanical stress, aging, and wear on the possibility of membrane breach during long-term use were analyzed. Further analysis based on membrane aging mechanisms and material properties revealed that the membrane filtration systems could release NPs/MPs to drinking water supply networks. Although the toxicity of membrane materials to human body needs further study, the action that should be taken to treat the release of NPs/MPs in DWTPs cannot be ignored: (1) in-depth study of the generation and release mechanisms of NPs/MPs; (2) reconsideration of membrane life cycle design; (3) determination of NPs/MPs concentration limits in drinking water through toxicity assessment; (4) accelerating development of biomembrane and inorganic membrane materials; and (5) unification of NPs/MPs sampling and testing standard. Accordingly, more research needs to be conducted to investigate the release of NPs and/or MPs from DWTPs.

A systematic protocol of microplastics analysis from their identification to quantification in water environment: A comprehensive review

With microplastics (MPs) being detected in aquatic environments, numerous studies revealed that they caused severe environmental issues, including damage to ecosystems and human health. MPs transport persistent organic pollutants by adsorbing them, and in nanoplastics this phenomenon is exacerbated by increased surface area. Despite their environmental risk, systematic protocol for qualitative and quantitative analysis are yet to be established in environmental analytical chemistry. Current analytical technologies on MP identification have technological limits with regard to detecting small sized particles (<1 µm), underestimation of MPs with organic contaminants, and physico-chemically altered particles by weathering and photo degradation. According to the published works, MPs are spread in living organisms through the food web, and are even detected in bottled water. To determine its eco-toxicity and removal by biodegradation, its accuracy, reliability, and reproducibility should be ensured by establishing a systematic protocol of MP identification. This review compares procedures, applicability, and limitations of Fourier transform infrared spectroscopy, Raman spectroscopy, and thermo-analytical methods for identifying MPs. Finally, it suggests systematic protocols for MPs analysis.

The effect of microplastics pollution in microalgal biomass production: A biochemical study

Microplastics (MPs) are widely spread throughout aquatic systems and water bodies. Given that water quality is one of the most important parameters in the microalgal-based industry, it is critical to assess the biochemical impact of short- and long-term exposure to MPs pollution. Here, the microalga Phaeodactylum tricornutum was exposed to water contaminated with 0.5 and 50 mg L^-1 of polystyrene (PS) and/or polymethyl methacrylate (PMMA). Results show that the microalgal cultures exposed to lower concentrations of PS displayed a growth enhancement of up to 73% in the first stage (days 3-9) of the exponential growth phase. Surprisingly, and despite the fact that long-term exposure to MPs contamination did not impair microalgal growth, a steep decrease in biomass production (of up to 82%) was observed. The production of photosynthetic pigments was shown to be pH-correlated during the full growth cycle, but cell density-independent in later stages of culturing. The extracellular carbohydrates production exhibited a major decrease during long-term exposure. Still, the production of extracellular proteins was not affected by the presence of MPs. This pilot laboratory-scale study shows that the microalgal exposure to water contaminated with MPs disturbs its biochemical equilibrium in a time-dependent manner, decreasing biomass production. Thus, microalgal industry-related consequences derived from the use of MPs-contaminated water are a plausible possibility.