Role of chitin nanocrystals and nanofibers on physical, mechanical and functional properties in thermoplastic starch films

Effect of Oxidized Wood Pulp Fibers on the Performance of the Thermoplastic Corn Starch Composites

In this study, oxidized wood pulp fiber (OWPF) was prepared by oxidizing wood pulp fiber (WPF) with NaIO4, and OWPFs with different oxidation degrees were obtained and characterized by light microscope, XRD, and TG. Then, OWPFs with different oxidation degrees were incorporated into thermoplastic starch (TPS) to prepare OWPF/TPS composites. The cross-section morphology, water resistance, and physical and mechanical properties of the composites were investigated. SEM showed good dispersion of OWPF in the continuous TPS phase. The tensile strength of OWPF/TPS reached a maximum value of 5.02 MPa when the oxidation degree of OWPF was 0.5. Elongation at break of OWPF/TPS composites increased with the increasing oxidation degree of OWPF. Meanwhile, as a result of cross-linking, the water contact angle was also improved with the increased oxidation degree of OWPF. The study provided a new way to prepare a degradable TPS composite with satisfying properties to be used for packaging and catering.

Preparation and surface modification of crab nanochitin for organogels based on thiol-ene click cross-linking

Incompatibility of chitin nanomaterials with organic solvents is challenging in the design of the desirable organogels. The long hydrocarbon chains were covalently grafted on the surface of nanochitins, with the attachment of reactive allyl groups and improved dispersion in organic solvents. The reactive thiol groups of poly (ethylene glycol) were introduced into the allyl-nanochitin suspensions to produce the organogels by the thiol-ene click reaction. Attributed to the UV-induced cross-linking between the soft segments of thiolated-PEG and the allyl-nanochitin, the stable organogels with the storage modulus higher than the loss modulus by one order of magnitude were obtained, exhibiting the significant phase transition and mechanical enhancement on the rheological behavior. The combination of crystalline allyl-nanochitin and polymeric chains played a crucial role in the construction of the micro-network, attributing to the stability and mechanical strength of the organogels.

Marine-Derived Polymeric Materials and Biomimetics: An Overview

The review covers recent literature on the ocean as both a source of biotechnological tools and as a source of bio-inspired materials. The emphasis is on marine biomacromolecules namely hyaluronic acid, chitin and chitosan, peptides, collagen, enzymes, polysaccharides from algae, and secondary metabolites like mycosporines. Their specific biological, physicochemical and structural properties together with relevant applications in biocomposite materials have been included. Additionally, it refers to the marine organisms as source of inspiration for the design and development of sustainable and functional (bio)materials. Marine biological functions that mimic reef fish mucus, marine adhesives and structural colouration are explained.

Physical-Chemical Evaluation of Active Food Packaging Material Based on Thermoplastic Starch Loaded with Grape cane Extract

The aim of this paper is to evaluate the physicochemical and microbiological properties of active thermoplastic starch-based materials. The extract obtained from grape cane waste was used as a source of stilbene bioactive components to enhance the functional properties of thermoplastic starch (TPS). The biomaterials were prepared by the compression molding technique and subjected to mechanical, thermal, antioxidant, and microbiological tests. The results showed that the addition of grape cane extract up to 15 wt% (TPS/WE15) did not significantly influence the thermal stability of obtained biomaterials, whereas mechanical resistance decreased. On the other side, among all tested pathogens, thermoplastic starch based materials showed antifungal activity toward Botrytis cinerea and antimicrobial activity toward Staphylococcus aureus, suggesting potential application in food packaging as an active biomaterial layer.

Adipose-Derived Mesenchymal Stem Cell Chondrospheroids Cultured in Hypoxia and a 3D Porous Chitosan/Chitin Nanocrystal Scaffold as a Platform for Cartilage Tissue Engineering

Articular cartilage degeneration is one of the most common causes of pain and disability in middle-aged and older people. Tissue engineering (TE) has shown great therapeutic promise for this condition. The design of cartilage regeneration constructs must take into account the specific characteristics of the cartilaginous matrix, as well as the avascular nature of cartilage and its cells' peculiar arrangement in isogenic groups. Keeping these factors in mind, we have designed a 3D porous scaffold based on genipin-crosslinked chitosan/chitin nanocrystals for spheroid chondral differentiation of human adipose tissue-derived mesenchymal stem cells (hASCs) induced in hypoxic conditions. First, we demonstrated that, under low oxygen conditions, the chondrospheroids obtained express cartilage-specific markers including collagen type II (COL2A1) and aggrecan, lacking expression of osteogenic differentiation marker collagen type I (COL1A2). These results were associated with an increased expression of hypoxia-inducible factor 1α, which positively directs COL2A1 and aggrecan expression. Finally, we determined the most suitable chondrogenic differentiation pattern when hASC spheroids were seeded in the 3D porous scaffold under hypoxia and obtained a chondral extracellular matrix with a high sulphated glycosaminoglycan content, which is characteristic of articular cartilage. These findings highlight the potential use of such templates in cartilage tissue engineering.

The effects of gelatin-CMC films incorporated with chitin nanofiber and Trachyspermum ammi essential oil on the shelf life characteristics of refrigerated raw beef

The effects of gelatin-carboxymethyl cellulose (Gel-CMC) based films containing chitin nano fiber (CHNF) and Trachyspermum ammi essential oil (Ajowan), on the shelf life extension of the raw beef at refrigerated temperature (4 °C) over a 12-day period were evaluated. Ajowan essential oil (AJEO) and CHNF were added to the films at 0.24, 0.64 and 1% v/v; and 2 and 4 wt%, respectively. The microbiological (total viable count, psychrotrophic count, Pseudomonas spp., Staphylococcus aureus, lactic acid bacteria, molds and yeasts), the chemical (pH, thiobarbituric acid and total volatile basic nitrogen), color and sensory properties of the packaged samples were evaluated periodically. Bacteria grew the most quickly in the control samples, followed by those wrapped with the Gel-CMC films; The lowest microbial counts, the least change in the chemical properties and the highest sensory scores after 12 days of storage were obtained for the samples wrapped in the films incorporated with 1% AJEO and 4 wt% CHNF.

Conductive biomass-based composite wires with cross-linked anionic nanocellulose and cationic nanochitin as scaffolds

In this study, a series of conductive composite wires were successfully prepared by combining dispersions of multi-wall carbon nanotubes (MWCNTs) and TEMPO-oxidized cellulose nanofibers (TOCNFs) with different MWCNTs contents into a dispersion of partially deacetylated α-chitin nanofibers (α-DECHNs) followed with a drying process. The TOCNFs/MWCNTs/α-DECHNs composite wires were prepared by extruding the negatively charged TOCNFs/MWCNTs dispersion into the positively charged α-DECHNs dispersion. The contact of the positively charged α-DECHNs and the negatively charged TOCNFs/MWCNTs triggers the electrostatic interaction (heterocoagulation) resulting in wire-shaped conductive composites. The SEM analysis indicates this conductive composite material has a wire-like shape with a rough but tight surface. The properties of samples were characterized by a zeta potential analyzer (Zetasizer Nano), a four-probe, an electrochemical workstation, a Fourier transform infrared spectroscopy (FTIR), an X-ray diffractometer (XRD), and a thermogravimetric analyzer (TG). Besides, the conductivity and the AC impedance of TOCNFs/MWCNTs/α-DECHNs composite wires with different MWCNTs contents were also analyzed. The conductivity of the composite wire increases from 9.98 × 10^-6 S∙cm^-1 to 1.56 × 10^-3 S∙cm^-1 as the MWCNTs content raises from 3.0 wt% to 14.0 wt%. When the MWCNTs content reaches 14.0 wt%, the prepared composite wire can light up LED at a voltage of 5 V, indicating the great potential of this biomass-based conductive composite in conductive material application.

Preparation of multifunctional carboxymethyl cellulose-based films incorporated with chitin nanocrystal and grapefruit seed extract

Chitin nanocrystals (ChNC) were isolated from shrimp shells powder using acid hydrolysis and ammonium persulfate methods. Multifunctional carboxymethyl cellulose (CMC) composite films were prepared by adding ChNC and grapefruit seed extract (GSE), and their effects on the optical, mechanical, water vapor barrier, and antibacterial properties of CMC film were investigated. The isolated ChNC had a needle-like structure with a length of 340-370 nm and a diameter of 18-20 nm depending on the isolation method. The CMC films prepared with ChNC and GSE were transparent with high UV barrier properties. The addition of GSE reduced the strength (TS) and stiffness (EM) of CMC films by 10.4% and 30.3%, respectively, while the flexibility (EB) increased by 17.7%. However, when the ChNC was added, the TS and EM of CMC film increased by 19.7% and 58.7%, respectively, and the EB remained the same. The addition of ChNC reduced the water vapor permeability (WVP) of the CMC film by 27%. CMC films containing GSE also showed strong antibacterial activity against foodborne pathogenic bacteria, E. coli and L. monocytogenes.

Self-Assembled Networks of Short and Long Chitin Nanoparticles for Oil/Water Interfacial Superstabilization

Highly charged (zeta potential ζ = +105 mV, acetate counterions) chitin nanoparticles (NCh) of three different average aspect ratios (∼5, 25, and >60) were obtained by low-energy deconstruction of partially deacetylated chitin. The nanoparticles were effective in reducing the interfacial tension and stabilized the oil/water interface via network formation (interfacial dilatational rheology data) becoming effective in stabilizing Pickering systems, depending on NCh size, composition, and formulation variables. The improved interfacial wettability and electrosteric repulsion facilitated control over the nanoparticle's surface coverage on the oil droplets, their aspect ratio and stability against coalescence during long-term storage. Emulsion superstabilization (oil fractions below 0.5) occurred by the microstructuring and thickening effect of NCh that formed networks at concentrations as low as 0.0005 wt %. The ultrasound energy used during emulsion preparation simultaneously reduced the longer nanoparticles, producing very stable, fine oil droplets (diameter ∼1 μm). Our findings indicate that NCh surpasses any reported biobased nanoparticle, including nanocelluloses, for its ability to stabilize interfaces at ultralow concentrations and represent a step-forward in efforts to fully replace surfactants in multiphase systems.

Preparation and properties of microfibrillated chitin/gelatin composites

Microfibrillated chitin/gelatin composite films were prepared by solvent casting method, and the nano-sized microfibrillated chitin as reinforce phase to improve oxygen resistance, water-resistant and mechanical performance in this system. The morphologies were analyzed by scanning electron microscope (SEM), and the mechanical properties were investigated by texture analyzer. Oxygen permeability property, optical property and swelling property were investigated. The results indicated that the elastic modulus and tensile strength of microfibrillated chitin/gelatin composite film reached 2.2 GPa and 74.5 MPa respectively when the content of microfibrillated chitin is 8 wt%. The swelling ratio decreased to 11.63 with the 6 wt% content of microfibrillated chitin. In addition, chitin microfibrils effectively enhanced the oxygen resistance of composite film without obvious loss of transmittance. This work expects to provide a pathway to improve gelatin performance.

Bio- and Fossil-Based Polymeric Blends and Nanocomposites for Packaging: Structure⁻Property Relationship

In the present review, the possibilities for blending of commodities and bio-based and/or biodegradable polymers for packaging purposes has been considered, limiting the analysis to this class of materials without considering blends where both components have a bio-based composition or origin. The production of blends with synthetic polymeric materials is among the strategies to modulate the main characteristics of biodegradable polymeric materials, altering disintegrability rates and decreasing the final cost of different products. Special emphasis has been given to blends functional behavior in the frame of packaging application (compostability, gas/water/light barrier properties, migration, antioxidant performance). In addition, to better analyze the presence of nanosized ingredients on the overall behavior of a nanocomposite system composed of synthetic polymers, combined with biodegradable and/or bio-based plastics, the nature and effect of the inclusion of bio-based nanofillers has been investigated.

Biopolymer nanofibrils: structure, modeling, preparation, and applications

Biopolymer nanofibrils exhibit exceptional mechanical properties with a unique combination of strength and toughness, while also presenting biological functions that interact with the surrounding environment. These features of biopolymer nanofibrils profit from their hierarchical structures that spun angstrom to hundreds of nanometer scales. To maintain these unique structural features and to directly utilize these natural supramolecular assemblies, a variety of new methods have been developed to produce biopolymer nanofibrils. In particular, cellulose nanofibrils (CNFs), chitin nanofibrils (ChNFs), silk nanofibrils (SNFs) and collagen nanofibrils (CoNFs), as the four most abundant biopolymer nanofibrils on earth, have been the focus of research in recent years due to their renewable features, wide availability, low-cost, biocompatibility, and biodegradability. A series of top-down and bottom-up strategies have been accessed to exfoliate and regenerate these nanofibrils for versatile advanced applications. In this review, we first summarize the structures of biopolymer nanofibrils in nature and outline their related computational models with the aim of disclosing fundamental structure-property relationships in biological materials. Then, we discuss the underlying methods used for the preparation of CNFs, ChNFs, SNF and CoNFs, and discuss emerging applications for these biopolymer nanofibrils.

Chitin Nanoforms Provide Mechanical and Topological Cues to Support Growth of Human Adipose Stem Cells in Chitosan Matrices

The precise role and value of incorporating nanoforms in biologically active matrices for medical applications is not known. In our current work, we incorporate two chitin nanoforms (i.e., nanocrystals or nanofibers) into Genipin-chitosan crosslinked matrices. These materials were studied as 2D films and 3D porous scaffolds to assess their potential as primary support and guidance for stem cells in tissue engineering and regenerative medicine applications. The incorporation of either nanoforms in these 2D and 3D materials reveals significantly better swelling properties and robust mechanical performance in contrast to nanoform-free chitosan matrices. Furthermore, our data shows that these materials, in particular, incorporation of low concentration chitin nanoforms provide specific topological cues to guide the survival, adhesion, and proliferation of human adipose-derived stem cells. These findings demonstrate the potential of Genipin-chitosan crosslinked matrices impregnated with chitin nanoforms as value added materials for stem cell-based biomedical applications.

Facile construction of mechanically tough collagen fibers reinforced by chitin nanofibers as cell alignment templates

Reconstituted collagen fibers with excellent mechanical performance were successfully fabricated with sodium alginate as coagulate and chitin nanofibers as reinforcing filler and applied as a fibroblast alignment templated scaffold.

The Antifungal Activity of Functionalized Chitin Nanocrystals in Poly (Lactid Acid) Films

As, in the market, poly (lactic acid) (PLA) is the most used polymer as an alternative to conventional plastics, and as functionalized chitin nanocrystals (CHNC) can provide structural and bioactive properties, their combination sounds promising in the preparation of functional nanocomposite films for sustainable packaging. Chitin nanocrystals were successfully modified via acylation using anhydride acetic and dodecanoyl chloride acid to improve their compatibility with the matrix, PLA. The nanocomposite films were prepared by extrusion/compression approach using different concentrations of both sets of functionalized CHNC. This investigation brings forward that both sets of modified CHNC act as functional agents, i.e., they slightly improved the hydrophobic character of the PLA nanocomposite films, and, very importantly, they also enhanced their antifungal activity. Nonetheless, the nanocomposite films prepared with the CHNC modified with dodecanoyl chloride acid presented the best properties.

Emerging trends in eco-compliant, synergistic, and hybrid assembling of multifunctional polymeric bionanocomposites

The quest to develop eco-benign polymeric hybrid materials arose out of the need to protect the environment from the harmful effects of synthetic petroleum polymeric waste and meet the specific needs of industries such as oil and gas, aerospace, automotives, packaging, electronics biomedicals, pharmaceuticals, agricultural, and construction. This has resulted in synergistic hybrid assembling of natural fibers, polymers, biopolymers, and nanoparticles. Bionanocomposites based on inorganic nanoparticle reinforced biofiber, polymers and biopolymers, and polysaccharides such as chitosan, alginate, and cellulose derivatives, and so on, exhibiting at least a dimension at the nanometer scale, are an emerging group of nanostructured hybrid materials. These hybrid bionanocomposites exhibit structural and multifunctional properties suitable for versatile applications similar to polymer nanocomposites. Their biocompatibility and biodegradability provide opportunities for applications as eco-benign green nanocomposites. This review presents state-of-the-art progress in synergistic nanotechnological assembling of bionanocomposites relative to processing technologies, product development, and applications.

Hemicelluloses/montmorillonite hybrid films with improved mechanical and barrier properties

A facile and environmentally friendly method was introduced to incorporate montmorillonite (MMT) as an inorganic phase into quaternized hemicelluloses (QH) for forming hemicellulose-based films. Two fillers, polyvinyl alcohol (PVA) and chitin nanowhiskers (NCH), were added into the hemicelluloses/MMT hybrid matrices to prepare hybrid films, respectively. The hybrid films were nanocomposites with nacre-like structure and multifunctional characteristics including higher strength and good oxygen barrier properties via the electrostatic and hydrogen bonding interactions. The addition of PVA and NCH could induce changes in surface topography, and effectively enhance mechanical strength, thermal stability, transparency, and oxygen barrier properties. The tensile strengths of the composite films F_PVA(0.3), F_PVA(0.5), and F_NCH(0.8) were 53.7, 46.3, and 50.1 MPa, respectively, which were 171%, 134%, and 153% larger than the F_QH-MMT film (19.8 MPa). The tensile strength, and oxygen transmission rate of QH-MMT-PVA film were better than those of quaternized hemicelluloses/MMT films. Thus, the proper filler is very important for the strength of the hybrid film. These results provide insights into the understanding of the structural relationships of hemicellulose-based composite films in coating and packaging application for the future.