Application of nanotechnology in agriculture, postharvest loss reduction and food processing: food security implication and challenges

Peculiarities of bioaccumulation and toxic effects produced by nanoparticles of molybdenum (VI) oxide under multiple oral exposure of rats: examination and comparative assessment

INTRODUCTION

Molybdenum (VI) oxide nanoparticles (MoO3 NPs) are widely used in various economic activities. This creates elevated risks of exposure to this nanomaterial for workers and population in general and, consequently, there can be an increased number of developing pathological changes caused by exposure to MoO3 NPs.

OBJECTIVE

To examine and comparatively assess peculiarities of bioaccumulation and toxic effects produced by MoO NPs under multiple oral introductions.

METHODS

We evaluated sizes of analyzed particles by scanning electronic microscopy; specific surface area was calculated by the method of Brunauer, Emmett and Taylor; the total pore volume, by Barrett, Joyner and Halenda. Rats were exposed as per the scheme introduced by Lim with colleagues. We examined biochemical and hematological blood indicators, molybdenum concentrations and pathomorphological changes in tissues of various organs 24 hours after the last exposure. The study involved comparison with effects produced by MoO3 microparticles.

RESULTS

The tested MoO3 sample was established to be a nanomaterial as per the whole set of its physical properties. 50% of animals in the exposed group died on the 16th day in the experiment after the total exposure dose of MoO3 NPs reached 6500 mg/kg of body weight. Having analyzed blood plasma, we determined the following. There was a growth in quantity of leukocytes and a share of segmented neutrophils and monocytes, which were by 1.76-3.50 times higher than in the control group. Activity of alanine aminotransferase, aspartate aminotransferase, alkaline phosphatase, gamma-glutamyl transpeptidase, alpha-amylase, and lactate dehydrogenase, and concentrations of urea, crude and direct bilirubin were higher by 1.61-22.86 times. Decrease in the number of platelets, plateletcrit, the relative number of lymphocytes, the number and proportion of large platelets by 1.31-2.71 times. We detected elevated molybdenum concentrations in the lungs, heart, liver, kidneys, brain and blood under exposure to MoO3 NPs in an amount exceeding the control values by 12.10-361.75 times. Rats exposed to MoO3 NPs had liver parenchymal steatosis, inflammatory changes, hemorrhagic infarctions and hyperplasia in the lungs.

CONCLUSION

MoO3 NPs have a more apparent ability to bioaccumulate and produce toxic effects in comparison with their microdispersed analogue under multiple oral introductions into the body.

Conferring the Midas Touch on Integrative Taxonomy: A Nanogold-Oligonucleotide Conjugate-Based Quick Species Identification Tool

Nanogold or functionalized gold nanoparticles (GNPs) have myriad applications in medical sciences. GNPs are widely used in the area of nanodiagnostics and nanotherapeutics. Applications of GNPs in taxonomic studies have not been studied vis-à-vis its extensive medical applications. GNPs have great potential in the area of integrative taxonomy. We have realized that GNPs can be used to visually detect animal species based on molecular signatures. In this regard, we have synthesized gold nanoparticles (<20 nm) and have developed a method based on interactions between thiolated DNA oligonucleotides and small-sized GNPs, interactions between DNA oligonucleotides and target DNA molecules, and self-aggregating properties of small-sized GNPs under high salt concentrations leading to a visible change in colour. Exploiting these intermolecular and interparticle interactions under aqueous conditions, in the present work, we have demonstrated the application of our procedure by using a DNA oligonucleotide probe designed against a portion of the mitochondrial genome of the codling moth Cydia pomonella. This method is accurate, quick, and easy to use once devised and can be used as an additional tool along with DNA barcoding. This tool can be used for distinguishing cryptic species, identification of morphovariants of known species, diet analysis, and identification of pest species in quarantine facilities without any need of performing repetitive DNA sequencing. We suggest that designing and selecting a highly specific DNA probe is crucial in increasing the specificity of the procedure. Present work may be considered as an effort to introduce nanotechnology as a new discipline to the extensive field of integrative taxonomy with which disciplines like palaeontology, embryology, anatomy, ethology, ecology, biochemistry, and molecular biology are already associated for a long time.

Overview on Recent Developments in the Design, Application, and Impacts of Nanofertilizers in Agriculture

Nutrient management is always a great concern for better crop production. The optimized use of nutrients plays a key role in sustainable crop production, which is a major global challenge as it depends mainly on synthetic fertilizers. A novel fertilizer approach is required that can boost agricultural system production while being more ecologically friendly than synthetic fertilizers. As nanotechnology has left no field untouched, including agriculture, by its scientific innovations. The use of nanofertilizers in agriculture is in the early stage of development, but they appear to have significant potential in different ways, such as increased nutrient-use efficiency, the slow release of nutrients to prevent nutrient loss, targeted delivery, improved abiotic stress tolerance, etc. This review summarizes the current knowledge on various developments in the design and formulation of nanoparticles used as nanofertilizers, their types, their mode of application, and their potential impacts on agricultural crops. The main emphasis is given on the potential benefits of nanofertilizers, and we highlight the current limitations and future challenges related to the wide-scale application before field applications. In particular, the unprecedent release of these nanomaterials into the environment may jeopardize human health and the ecosystem. As the green revolution has occurred, the production of food grains has increased at the cost of the disproportionate use of synthetic fertilizers and pesticides, which have severely damaged our ecosystem. We need to make sure that the use of these nanofertilizers reduces environmental damage, rather than increasing it. Therefore, future studies should also check the environmental risks associated with these nanofertilizers, if there are any; moreover, it should focus on green manufactured and biosynthesized nanofertilizers, as well as their safety, bioavailability, and toxicity issues, to safeguard their application for sustainable agriculture environments.

Nano-fertilizers: A sustainable technology for improving crop nutrition and food security

Excessive use of synthetic fertilizers cause economic burdens, increasing soil, water and atmospheric pollution. Nano-fertilizers have shown great potential for their sustainable uses in soil fertility, crop production and with minimum or no environmental tradeoffs. Nano-fertilizers are of submicroscopic sizes, have a large surface area to volume ratio, can have nutrient encapsulation, and greater mobility hence they may increase plant nutrient access and crop yield. Due to these properties, nano-fertilizers are regarded as deliverable 'smart system of nutrients'. However, the problems in the agroecosystem are broader than existing developments. For example, nutrient delivery in different physicochemical properties of soils, moisture, and other agro-ecological conditions is still a challenge. In this context, the present review provides an overview of various uses of nanotechnology in agriculture, preference of nano-fertilizers over the conventional fertilizers, nano particles formation, mobility, and role in heterogeneous soils, with special emphasis on the development and use of chitosan-based nano-fertilizers.

Toxicity and Uptake of CuO Nanoparticles: Evaluation of an Emerging Nanofertilizer on Wheat (Triticum aestivum L.) Plant

Wet chemistry was used to produce copper oxide nanoparticles (CuO NPs). The results indicated that most nanoparticles were bacillus-shaped and relatively uniform in size (less than 30 nm). The effect of synthesized CuO NPs on wheat (Triticum aestivum L.) germination and growth parameters was studied and compared to bulk Cu. The results showed that no significant difference was obtained in germination rate among all treatments. Bulk Cu additions significantly affect the mean germination rate and mean germination time. On the contrary, germinability was significantly affected by CuO NPs additions. Seed vigor index was calculated to demonstrate the superior treatment in wheat germination parameters, and the results confirmed that 0.1 mg L−1 of CuO NPs could be successfully used to improve wheat seed germination. Moreover, the general average Cu concentrations in the plant tissue were 139 and 103 mg kg−1 dry weight for bulk and CuO NPs, respectively, indicating the dissolution behavior of CuO NPs. The addition of CuO NPs (0.1 mg L−1) promotes chlorophyll formation equal to 0.5 mg L−1 of the bulk Cu addition. This means using nanoparticles as fertilizer could reduce 80% of traditional fertilizers. Nonetheless, Cu additions in both forms (NPs and bulk) reduce root growth substantially compared to control. The effective toxic dose (EC50) for bulk Cu and CuO NPs was 0.37 mg L−1 and 0.94 mg L−1, respectively. The results indicated that approximately 2.5 times CuO NPs concentration is equal to the toxicity dose of bulk Cu due to lowered CuO NPs dissolution. Our study showed that Cu phytotoxicity is a non-nanosized effect and showed that plant-induced changes under environmentally real conditions should be considered when measuring the dissolution of CuO NPs near wheat plant roots. This study implies that using nano-CuO as a micronutrient amendment has a potential benefit rather than the soluble Cu salt for plant growth.

Bell Shape Curves of Hemolysis Induced by Silver Nanoparticles: Review and Experimental Assay

The hemolytic activity assay is a versatile tool for fast primary toxicity studies. This work presents a systematic study of the hemolytic properties of ArgovitTM silver nanoparticles (AgNPs) extensively studied for biomedical applications. The results revealed an unusual and unexpected bell-shaped hemolysis curve for human healthy and diabetic donor erythrocytes. With the decrease of pH from 7.4 and 6.8 to 5.6, the hemolysis profiles for AgNPs and AgNO3 changed dramatically. For AgNPs, the bell shape changed to a step shape with a subsequent sharp increase, and for AgNO3 it changed to a gradual increase. Explanations of these changes based on the aggregation of AgNPs due to the increase of proton concentration were suggested. Hemolysis of diabetic donor erythrocytes was slightly higher than that of healthy donor erythrocytes. The meta-analysis revealed that for only one AgNPs formulation (out of 48), a bell-shaped hemolysis profile was reported, but not discussed. This scarcity of data was explained by the dominant goal of studies consisting in achieving clinically significant hemolysis of 5-10%. Considering that hemolysis profiles may be bell-shaped, it is recommended to avoid extrapolations and to perform measurements in a wide concentration interval in hemolysis assays.

Can Nanofertilizers Mitigate Multiple Environmental Stresses for Higher Crop Productivity?

The global food production for the worldwide population mainly depends on the huge contributions of the agricultural sector. The cultivated crops of foods need various elements or nutrients to complete their growth, and these are indirectly consumed by humans. During this production, several environmental constraints or stresses may cause losses in the global agricultural production. These obstacles may include abiotic and biotic stresses, which have already been studied in both individual and combined cases. However, there are very few studies on multiple stresses. On the basis of the myriad benefits of nanotechnology in agriculture, nanofertilizers (or nanonutrients) have become promising tools for agricultural sustainability. Nanofertilizers are also the proper solution to overcoming the environmental and health problems that can result from conventional fertilizers. The role of nanofertilizers has increased, especially under different environmental stresses, which can include individual, combined, and multiple stresses. The stresses are most commonly the result of nature; however, studies are still needed on the different stress levels. Nanofertilizers can play a crucial role in supporting cultivated plants under stress and in improving the plant yield, both quantitatively and qualitatively. Similar to other biological issues, many open-ended questions still require further investigation: Is the right time and era for nanofertilizers in agriculture? Will the nanofertilizers be the dominant source of nutrients in modern agriculture? Are nanofertilizers, and particularly biological synthesized ones, the magic solution for sustainable agriculture? What are the expected damages of multiple stresses on plants?