Enhanced removal of uranium(VI) from aqueous solution by a novel Mg-MOF-74-derived porous MgO/carbon adsorbent

Acid resistant functionalised magnetic nanoparticles for radionuclide and heavy metal adsorption

Coating superparamagnetic iron oxide NPs with SiO₂ has been established in order to confer stability in acidic media. Acid stability tests were carried out between pH 1 and pH 7 to determine the effectiveness of the SiO₂ passivating layer to protect the magnetic Fe₃O₄ core. Transmission Electron Microscopy (TEM) and zeta potential measurements have shown that uncoated Fe₃O₄ NPs exhibit rapid agglomeration and dissolution when exposed to acidic media, moving from a zeta potential of - 26 mV to a zeta potential of + 3 mV. In contrast, the SiO₂ coating of the Fe₃O₄ NPs shows a very high degree of stability for over 14 months and the zeta potential of these NPs remained at ∼- 39 mV throughout the acid exposure and they showed no loss in magnetisaton. Due to the use of these NPs as a potential tool for heavy metal extraction, the stability of the surface functionalisation (in this case a phosphate complex) was also assessed. With a constant zeta potential of ∼ - 29 mV for PO_x-SiO₂@Fe₃O₄ NP complex, the phosphate functionality was shown to be highly stable in the acidic conditions simulating the environment of certain nuclear wastes. ATR-FTIR was conducted after acid exposure confirming that the phosphate complex on the surface of the NPs remained present. Finally, preliminary sorption experiments were carried out with Pb(II), where the NP complexes shown complete removal of the heavy metals at pH 3 and pH 5.

Metal-organic frameworks as superior porous adsorbents for radionuclide sequestration: Current status and perspectives

Efficient separation of hazardous radionuclides from radioactive waste remains a challenge to the global acceptance of nuclear power due to complex nature of the waste, high radiotoxicities and presence of large number of interfering elements. Sorption of radioactive elements from liquid phase, gas phase or their solid particulates on various synthetic organic, inorganic or biological sorbents is looked as one of the options for their remediation. In this context, highly porous materials, termed as metal-organic frameworks (MOFs), have shown promise for efficient capturing of various types of radioactive elements. Major advantages that have been advocated for the application of MOFs in radionuclide sorption are their excellent chemical stability, and their large surface area due to abundant functional groups, and porosity. In this review, recent developments on the application of MOFs for radionuclide sequestration are briefly discussed. Focus has been devoted to address the separation of few crucial radioactive elements such as Th, U, Tc, Re, Se, Sr and Cs from aqueous solutions, which are important for liquid radioactive waste management. Apart from these radioactive metal ions, removal of radionuclide bearing gases such as I₂, Xe, and Kr are also discussed. Aspects related to the interaction of MOFs with the radionuclides are also discussed. Finally, a perspective for comprehensive investigation of MOFs for their applications in radioactive waste management has been outlined.

Hydrolytically stable foamed HKUST-1@CMC composites realize high-efficient separation of U(VI)

HKUST-1@CMC (HK@CMC) composites that show good acid and alkali resistance and radiation resistance were successfully synthesized by introducing carboxymethyl cellulose (CMC) onto the surface of HKUST-1 using a foaming strategy. For the first time, the composites were explored as efficient adsorbents for U(VI) trapping from aqueous solution, with encouraging results of large adsorption capacity, fast adsorption kinetics, and desirable selectivity toward U(VI) over a series of competing ions. More importantly, a hybrid derivative film was successfully prepared for the dynamic adsorption of U(VI). The results show that ∼90% U(VI) can be removed when 45 mg L-1 U(VI) was passed through the film one time, and the removal percentage is still more than 80% even after four adsorption-desorption cycles, ranking one of the most practical U(VI) scavengers. This work offers new clues for application of the Metal-organic-framework-based materials in the separation of radionuclides from wastewater.

Recovery of Uranium by Se-Derivatives of Amidoximes and Composites Based on Them

An Se-derivative of amidoxime was synthesized for the first time as a result of the reaction of oxidative polycondensation of N’-hydroxy-1,2,5-oxadiazole-3-carboximidamide with SeO₂: its elementary units are linked to each other due to the formation of strong diselenide bridges. The element composition of the material was established, and the structure of the elementary unit was suggested. The sorption-selective properties were evaluated, and it was found that the adsorbent can be used for the selective recovery of U (VI) from liquid media with a pH of 6–9. The effect of some anions and cations on the efficiency of recovery of U (VI) was estimated. Composite materials were fabricated, in which silica gel with a content of 35, 50, and 65 wt.% was used as a matrix to be applied in sorption columns. The maximum values of adsorption of U (VI) calculated using the Langmuir equation were 620–760 mg g⁻¹ and 370 mg g⁻¹ for the composite and non-composite adsorbents, respectively. The increase in the kinetic parameters of adsorption in comparison with those of the non-porous material was revealed, along with the increase in the specific surface area of the composite adsorbents. In particular, the maximum sorption capacity and the rate of absorption of uranium from the solution increased two-fold.

Insight into the role of the zeolitization process in enhancing the adsorption performance of kaolinite/diatomite geopolymer for effective retention of Sr (II) ions; batch and column studies

Diatomite/kaolinite-based geopolymer (GP) was synthesized and incorporated in zeolitization process (Z/GP) to investigate the role of the zeolite phases in inducing its retention capacity of the dissolved Sr (II) ions in water. The retention of Sr (II) ions using Z/GP in comparison with GP was evaluated based on both batch and fixed-bed column studies. In the batch study, the zeolitized geopolymer (Z/GP) shows enhancement in the Sr (II) retention capacity (193.7 mg/g) as compared to the normal geopolymer (102 mg/g). Moreover, the recyclability studies demonstrate higher stability for Z/GP than GP with a retention percentage higher than 90% for five reusing runs. The kinetic and the equilibrium properties of the occurred Sr (II) retention reactions follow the assumption of the Pseudo-Second order model (R² > 0.96) and Langmuir model (R² > 0.97), respectively. The Gaussian energies (15.4 kJ/mol (GP) and 11.47 kJ/mol (Z/GP)) related to retention mechanism of chemical type and within the suggested range for the zeolitic ion exchange processes. The Sr (II) retention reactions by GP and Z/GP are of spontaneous and exothermic properties which qualifies the products to be used at low-temperature conditions (20 °C). The column studies also declared higher performance for the Z/GP fixed bed as compared to the normal GP bed considering the total Sr (II) retention percentage (72.9%), treated volume (8 L), saturation time (1620 min), and a maximum capacity of Z/GP particles in the bed (567.6 mg/g).

Facile carboxylation of natural eggshell membrane for highly selective uranium (VI) adsorption from radioactive wastewater

With the commercial nuclear technology rising in society nowadays, it is of paramount importance to remove uranium (VI) in radioactive wastewater through a cost-effective and efficient way. Due to simple operation, low cost and abundant adsorbents, the adsorption method has been widely used to treat the radioactive wastewater. However, unsatisfactory selectivity and potential secondary pollution of most adsorbents hamper their practical large-scale application. To overcome these limitations, an effective and green absorbent is developed by functionalizing the waste eggshell membrane (ESM) with carboxyl-rich agents. This design concept transfers waste ESM (or "trash") into a unique "treasure" absorbent for directly handling radioactive wastewater. The resultant ESM-COOH shows excellent adsorption selectivity toward uranium (VI) with the selectivity coefficient of 75%, exceeding a majority of reported adsorbents. Moreover, its adsorption capacity still maintains 84% of the initial value after six cycles, suggesting good reusability. These excellent features enable the ESM-COOH to adsorb uranium (VI) highly selectively and efficiently. This work offers a concept to transfer biological wastes into treasure for the mass remediation of water body.

Metal-Organic-Framework Based Functional Materials for Uranium Recovery: Performance Optimization and Structure/Functionality-Activity Relationships

Uranium recovery has profound significance in both uranium resource acquisition and pollution treatment. In recent years, metal-organic frameworks (MOFs) have attracted much attention as potential uranium adsorbents owing to their tunable structural topology and designable functionalities. This review explores the research progress in representative classic MOFs (MIL-101, UiO-66, ZIF-8/ZIF-67) and other advanced MOF-based materials for efficient uranium extraction in aqueous or seawater environments. The uranium uptake mechanism of the MOF-based materials is refined, and the structure/functionality-property relationship is further systematically elucidated. By summarizing the typical functionalization and structure design methods, the performance improvement strategies for MOF-based adsorbents are emphasized. Finally, the present challenges and potential opportunities are proposed for the breakthrough of high-performance MOF-based materials in uranium extraction.

Novel Strategy for the Development of Antibacterial TiO2 Thin Film onto Polymer Substrate at Room Temperature

This work demonstrates a novel method to deposit an antibacterial TiO₂ thin film on a polymer substrate at room temperature. A combination of sol–gel and photon assistance was used in the experiment in order to avoid any thermal processes of thin film crystallization. The morphological photograph of samples indicated that the TiO₂ thin film was perfectly coated on the PVC substrate without any cracks or pinholes. Chemical analysis by EDS and XPS reported that the thin film consisted of titanium (Ti), oxygen (O), and carbon (C). The Raman spectrum proved that the thin film was the anatase phase of TiO₂ and, furthermore, that it was contaminated with carbon remaining from the photon assistance process. In addition, the optical band gap of the thin film was 3.35 eV, suggesting that the photocatalytic activity of TiO₂ should occur under UV-A radiation. The bacteria viability assay was examined using E. coli and S. typhimurium as indicator strains under UV-A irradiation (365 nm) at different times. The data from OD and CFU count revealed that >97% of bacteria were killed after 60 min of irradiation, and the bacteria were completely killed at 120 min for E. coli and 180 min for S. typhimurium.

Facile preparation of robust dual MgO-loaded carbon foam as an efficient adsorbent for malachite green removal

This study developed a facile approach for the fabrication of dual MgO-loaded carbon foam (DMCF) via carbonization of a cured MgO/cyanate ester resin mixture, which underwent self-foaming of the resin followed by the carbothermal reduction of MgO. The features of the prepared DMCF prepared were characterized by FESEM, TEM, XRD, FTIR, XPS and so on, and the effects of adsorption conditions, adsorption isotherms, kinetics, and thermodynamics on malachite green (MG) removal using the DMCF as adsorbents were investigated through batch adsorption experiments. Results demonstrate that the DMCF possesses a unique dual loading of MgO particles which are not only loaded onto its foam walls but also filled within the walls with a graphene-wrapped core-shell structure. The experimental maximum adsorption capacity of MG reaches up to 1874.18 mg/g with a partition coefficient of 10.87 mg/g/μM. The adsorption process can be better described with Langmuir, pseudo-second-order, and intraparticle diffusion models. Moreover, the DMCF exhibits a removal percentage of 84.85% after five reuses, indicating that it is an efficient and promising adsorbent for MG adsorption.

Insight into chitosan/mesoporous silica nanocomposites as eco-friendly adsorbent for enhanced retention of U (VI) and Sr (II) from aqueous solutions and real water

The chitosan chains were integrated with MCM-48 mesoporous silica in an eco-friendly composite (CH/MCM-48) of enhanced adsorption capacity. The prepared CH/MCM-48 composite was applied in systematic retention of U (VI) as well as Sr (II) ions from water as the commonly detected radioactive pollutants. It displayed promising retention capacities of 261.3 mg/g and 328.6 mg/g for U (VI) and Sr (II) considering the equilibrium time interval that was identified after 420 min. The composite showed the kinetic behavior of the Pseudo-First order model and the isotherm properties of the Langmuir assumption. The thermodynamic assessment of the reactions validated the retention of both U (VI) and Sr (II) ions by spontaneous, favorable, and exothermic reactions. Based on the theoretical values of entropy (-5.94 kJ mol^-1 (U (VI)) and -2.93 kJ mol^-1 (Sr (II))), Gibbs free energy (less than 20 kJ mol^-1), and Gaussian energy (5.77 kJ mol^-1 (U (VI)) and 4.56 kJ mol^-1 (Sr (II))) the uptake processes are related to physical adsorption reactions. The CH/MCM-48 composite is of significant recyclability and showed considerable affinities for the studied radioactive ions even in the presence of other metal ions (Cd (II), Pb (II), Zn (II), and Co (II)).

A new method for the preconcentrations of U(VI) and Th(IV) by magnetized thermophilic bacteria as a novel biosorbent

This paper proposes the use of Anoxybacillus flavithermus SO-15 immobilized on iron oxide nanoparticles (NPs) as a novel magnetized biosorbent for the preconcentrations of uranium (U) and thorium (Th). The SPE procedure was based on biosorption of U(VI) and Th(IV) on a column of iron oxide NPs loaded with dead and dried thermophilic bacterial biomass prior to U(VI) and Th(IV) measurements by ICP-OES. The biosorbent characteristicswere explored using FT-IR, SEM, and EDX. Significant operational factors such as solution pH, volume and flow rate of the sample solution, amounts of dead bacteria and iron oxide nanoparticles, matrix interference effect, eluent type, and repeating use of the biosorbent on process yield were studied. The biosorption capacities were found as 62.7 and 56.4 mg g^-1 for U(VI) and Th(IV), respectively. The novel extraction process has been successfullyapplied to the tap, river, and lake water samples for preconcentrations of U(VI) and Th(IV).

Design of 3D alumina-doped magnesium oxide aerogels with a high efficiency removal of uranium(vi) from wastewater

3D alumina-doped magnesium oxide (Al₂O₃/MgO) aerogels with remarkable adsorption properties for U(vi) were prepared via a simple lyophilization–calcination method.

Fabrication of Magnetic Superstructure NiFe2O4@MOF-74 and Its Derivative for Electrocatalytic Hydrogen Evolution with AC Magnetic Field

As an ideal hydrogen production route, electrolyzed water still faces the challenges of high cost of noble-metal electrocatalysts and low performance of non-noble-metal catalysts in scalable applications. Recently, introduction of external fields (such as magnetic fields, light fields, etc.) to improve the electrocatalytic water splitting performance of non-noble-metal catalysts has attracted great attention due to their simplicity. Here, a simple method for preparing magnetic superstructure (NiFe₂O₄@MOF-74) is described, and the hydrogen evolution reaction (HER) behavior of its carbonized derivative, a ferromagnetic superstructure, is revealed in a wide range of applied voltage under an AC magnetic field. The overpotential (@10 mA cm^-2) required for the HER of the obtained ferromagnetic superstructure in 1 M KOH was reduced by 31 mV (7.7%) when a much small AC magnetic field (only 2.3 mT) is applied. Surprisingly, the promotion effect of the AC magnetic field is not monotonically increasing with the increase of the applied voltage or the strength of AC magnetic field, but increasing first, then weakening. This unusual behavior is believed to be mainly caused by the enhanced induced electromotive force and the additional energy by the applied AC magnetic field. This discovery provides a new idea for adjusting the performance of electrocatalytic reactions.

Stable sp2 carbon-conjugated covalent organic framework for detection and efficient adsorption of uranium from radioactive wastewater

Uranium is an important element in the nuclear industry while the discharge of radioactive wastewater can cause serious damages to the environment. In this work, an ultra-stable sp² carbon-conjugated covalent organic framework (COF-PDAN-AO) is synthesized with amidoxime-substituted monomers for detection and efficient adsorption of uranium from radioactive wastewater. Abundant amidoxime groups laced on the open 1D channels of COF-PDAN-AO exhibit exceptional accessibility and the regular pores facilitate the mass transfer. Based on these features, COF-PDAN-AO achieves ultra-low detection limit of 6.5 nM, high uranium adsorption capacity (410 mg/g) and selective interaction with uranium. In addition, various spectroscopies verify COF-PDAN-AO possesses excellent radioresistance in acidic solution. Regeneration studies have shown that COF-PDAN-AO maintained good structural stability after seven cycles. These results indicate that our sp² carbon conjugated COF can be potentially used for practical detection and adsorption of uranium from radioactive wastewater. This strategy can be extended to detection and extraction of other contaminants by designing the target ligand.

Construction of gel-like swollen-layer on Polyacrylonitrile Surface and Its Swelling Behavior and Uranium Adsorption Properties

In this study, a hyperbranched chelated hydrophilic swollen-layer was constructed on the surface of polyacrylonitrile (PAN) fiber with amino trimethylene phosphoric acid (ATMP) as a terminal group, which applied as an adsorbent for seawater uranium U(VI) extraction. This shows that U(VI) enter the gel-like swollen-layer to form a more complex body structure. The molecular chain conformational extension in the swollen-layer reduces the resistance of the uranyl ion to enter the swollen-layer, which is conducive to the adsorption behavior. The adsorption performance on the U(VI) by the adsorption experiment were found to be consistent with the Langmuir isotherm adsorption model and the pseudo-second-order kinetics, indicating that the adsorption of U(VI) by this material is uniform single-layer chemical adsorption. Ion competition experiments and cyclic adsorption experiments verify the practical application potential of the materials. In the dynamic simulation of seawater adsorption experiments, the adsorption capacity of the adsorbent reached 7.4 mg/g. Studies on the adsorption mechanism have found that a large number of hydroxyl groups in the swollen-layer and ATMP as an end machine have a chelation effect on U(VI).

Reduced Graphene Oxide/ZIF-67 Aerogel Composite Material for Uranium Adsorption in Aqueous Solutions

Safe and sustainable development of the nuclear industry has become the focus of attention, so it is important to manage byproducts of radioactive elements, such as uranium, which is inevitably discharged into water bodies. In this work, an adsorbent was fabricated by the in-site assembly of zeolitic imidazolate framework-67 (ZIF-67) on reduced graphene oxide (rGO) hydrogel. The adsorption property of the rGO/ZIF-67 aerogel toward U(VI) was studied via batch adsorption experiment. According to kinetic fitting tests, the adsorption property was in accord well with the pseudo-second-order model, revealing that the adsorption process was chemisorption; the results of the isothermal model conform to the Langmuir model, which exhibited an excellent adsorption capacity of 1888.55 mg/g. The thermodynamic parameter (ΔH° = 11.7 kJ/mol) obtained from the experimental data demonstrated that temperature rise is favorable for the adsorption. Based on the characterization of the material and results of the adsorption, the adsorption mechanism for U(VI) may be explained by surface complexation and electrostatic attraction. In general, all these results and characteristics of the adsorbent show that the rGO/ZIF-67 aerogel provides an alternative way to fabricate novel uranium adsorbent.

A Novel Phenolic Foam-Derived Magnetic Carbon Foam Treated as Adsorbent for Rhodamine B: Characterization and Adsorption Kinetics

In recent decades, dye wastewaters produced by dye-manufacturing and dye-consuming industries have become a growing water pollution problem. Herein, a novel phenolic foam-derived magnetic carbon foam is synthesized by in-situ pyrolysis of iron acetylacetonate (Fe(acac)3) containing phenolic resin and its corresponding application as an adsorbent for the removal of Rhodamine B from effluent is investigated. The characterization of the as-prepared adsorbent is carried out by SEM, EDS, XRD, XPS, VSM, FT-IR, Raman, and BET. The magnetic carbon foam is observed to consist of a CFe15.1/C matrix modified with α-Fe/Fe3C/Fe2O3 composites, possessing a 3D porous architecture formed by inter-connected cells with diameters of 50–200 μm and narrow ligaments with thicknesses of ~20 μm. Experimental tests demonstrate that the equilibrium of adsorption behavior of Rhodamine B onto the obtained adsorbent can be reached within 40 min and the corresponding maximum adsorption capacity is 258.03 mg/g. The effects of contact time and adsorbent dosage on the adsorption performance are investigated. Besides, four models are introduced to fit the experimental data to evaluate the adsorption kinetics. The overall rate constant is determined by the chemisorption process, according to the pseudo-second order adsorption kinetics mechanism. Besides, the pH effect on RhB adsorption onto magnetic carbon foam is investigated, with the pH values varying from 3 to 10. The above results prove the application prospect of magnetic carbon foam prepared in this work in dye wastewater treatment.

Efficiency and mechanism of adsorption of low-concentration uranium from water by a new chitosan/aluminum sludge composite aerogel

A novel chitosan/aluminum sludge composite aerogel was fabricated. It's capacity was up to 434.64 mg g⁻¹. It has good selectivity for U(vi) when multiple ions coexist. U(vi) uptake was due to surface complexation.

Effective capture of aqueous uranium from saline lake with magnesium-based binary and ternary layered double hydroxides

Uranium in saline lake brine is a nuclear resource that attracts worldwide attention. Relatively low concentrations (about 0.2 mg L^-1 to 30 mg L^-1) require high affinity for the capture materials. In this paper, magnesium binary layered double hydroxides (MgAl-LDH) and its Fe-induced ternary LDH (MgAlFe-LDH) were synthesized for the extraction of simulated concentrations of U(VI) in the saline lake brine system. Batch experiments have shown that both LDHs have strong affinity towards uranium. MgAl-LDH yielded of stronger affinity in lower U(VI) concentrations (0.2 mg L^-1 to 5 mg L^-1), while MgAlFe-LDH was at higher U(VI) concentrations (5 mg L^-1 to 30 mg L^-1). For current uranium extraction, the affinities of MgAl-LDH and MgAlFe-LDH are more than twice the maximum affinity of other LDHs and LDHs-based materials. Therefore, these two LDHs are suitable for U(VI) extraction with different concentration levels in saline lakes. The capture process followed the pseudo-second-order kinetics with fast adsorption speed, and the coexisting cations have little effect on the extraction rate. Research through X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed the main adsorption mechanisms are surface complexation and the interlayer carbonate coprecipitation. This work provides a potential method for U(VI) extraction while reusing the waste magnesium resources in saline lake.

A simple method for preparing ultra-light graphene aerogel for rapid removal of U(VI) from aqueous solution

In this study, graphene aerogel (GA) was successfully prepared through a simple hydrothermal method. The resulting GA exhibited a porous network structure with a large specific surface area (350.8 m²/g), ultra-light mass and easy separation from water. The pH_IEP value of the GA was estimated to be 3.5. The adsorption process and the factors that affect adsorption capacity were studied. The adsorption could be conducted in a wide pH range from 2.0 to 7.0. The maximum adsorption capacity of GA towards U(VI) at pH 4.0 and T = 298 K was 238.67 mg/g calculated from the Langmuir model. The GA had greatly rapid adsorption property for the removal of U(VI) at pH 4.0. Kinetic data showed good correlation with pseudo-second-order equation. Fourier transform infrared spectroscopy and X-ray photoelectron spectrometry characterizations showed that GA adsorbed U(VI) through chemical interaction by oxygen-containing and nitrogen-containing groups functional groups. The results show that GA has excellent application potential as an adsorbent material for removing U(VI) from aqueous solution.

Porphyrin-based metal-organic frameworks: protonation induced Q band absorption

In this work, porphyrin-based MOF nanosheets were formulated. The as-developed Gd-TCPP MOF nanosheets could be protonated significantly in an acidic solution, which greatly enhanced the UV-vis absorption at 665 nm. Also, a significant structural reorganization occurred to achieve a nanowire structure. As the center of the porphyrin had a metal coordination atom, the Q band absorption had better stability due to their inability to be protonated. These results confirm that the UV-vis absorption of the MOFs can be regulated via porphyrin protonation, and the protonation of the nanosheets in the acidic solution can be avoided by adding a metal coordination atom to the porphyrin center. We also found that zinc ions had better coordination ability with the pyrrole nitrogen of the inner porphyrin core of Gd-TCPP MOF nanosheets. Finally, the protonation of MOFs was confirmed by the yield of singlet oxygen. Also, metallic oxide nanoparticles can be formed in situ and adsorbed on the Gd-TCPP MOF nanosheets. These results are useful for the preparation of metallic oxide nanoparticle-loaded nanomaterials. This work may open novel avenues for changing the UV-vis absorption of porphyrin-based nanomaterials.

Synthesis of nanoscale zero-valent iron loaded chitosan for synergistically enhanced removal of U(VI) based on adsorption and reduction

In this study, chitosan (CS) loading well-dispersed nanoscale zero-valent iron (NZVI/CS) was successfully prepared via the liquid-phase reduction method. Characterizations of the NZVI/CS with high-resolution transmission electron microscopy and X-ray diffraction suggested that the as-prepared NZVI/CS comprised numerous dispersed Fe⁰ nanoparticles. Synergistic adsorption and reduction occurred during the removal process based on X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Influence of pH, contract time and temperature on U(VI) removal were investigated. The high removal capacity and rapid removal kinetics were predominately ascribed to the existence of well-distributed NZVI, which could rapidly reduce U(VI) into U(IV). The removal process could be better depicted by the Langmuir isotherm model and the pseudo-second-order kinetic model. The thermodynamic parameters showed that the removal process was exothermic. These findings indicate that the synthesized NZVI/CS composites have potential application for the removal of U(VI) from the sewage water.