A facile synthesis for uniform tablet-like TiO2/C derived from Materials of Institut Lavoisier-125(Ti) (MIL-125(Ti)) and their enhanced visible light-driven photodegradation of tetracycline

Robust charge carrier by Fe3O4 in Fe3O4/WO3 core-shell photocatalyst loaded on UiO-66(Ti) for urea photo-oxidation

In this study, a facile four-step hydrothermal method was utilized to deposit a core-shell structure on UiO-66(Zr/Ti) nanoflake (NFs) as a visible-light-driven photocatalyst. The core was magnetic Fe₃O₄ which served as a charge carrier coated with WO₃ shell. The as-prepared photocatalyst was characterized by XRD, VSM, BET, FTIR, FE-SEM, UV-Vis-DRS, and PL techniques which proved successful deposition of Fe₃O₄@WO₃ core/shell particle on UiO-66(Zr/Ti)-NFs. The obtained photocatalyst was subsequently applied for urea photo-oxidation. This magnetically recoverable photocatalyst exhibited superior activity due to its desirable band alignment, high stability, and generation of the photo-induced charge carriers, as well as providing a high surface area with low mass transfer resistance. Fe₃O₄ core acted as charge-carrier to transport the photogenerated charges of UiO-66(Zr/Ti)-NFs (electron-donor) to WO₃ charge-collectors for effective photoconversion. The central composite design was applied to design the experiments matrix in which flow rate, pH, irradiation time, catalyst mass, and initial urea concentration were considered as operational factors. The optimized condition was found by defining the desirability function. 90% degradation percentage was achieved at 550 mL/min solution flowrate, pH = 7, 120 min irradiation time, 0.22 g UiO-66(Zr)-NFs-Fe₃O₄@WO_3, and 40 mg/L of the initial concentration of urea with the desirability value of 0.89. Such a superior photocatalytic activity of UiO-66-Fe₃O₄@WO₃ can be ascribed to the reclamation of Fe₃O₄ as a low bandgap carrier, which accelerated the conveyance of electrons and followed surpassing charge separation. Our present findings open a new strategy to produce a wide range of core-shell heterogeneous catalysts to be applied in photoreactors scale-up.

MOF based engineered materials in water remediation: Recent trends

The significant upsurge in the demand for freshwater has prompted various developments towards water sustainability. In this context, several materials have gained remarkable interest for the removal of emerging contaminants from various freshwater sources. Among the currently investigated materials for water treatment, metal organic frameworks (MOFs), a developing class of porous materials, have provided excellent platforms for the separation of several pollutants from water. The structural modularity and the striking chemical/physical properties of MOFs have provided more room for target-specific environmental applications. However, MOFs limit their practical applications in water treatment due to poor processability issues of the intrinsically fragile and powdered crystalline forms. Nevertheless, growing efforts are recognized to impart macroscopic shapability to render easy handling shapes for real-time industrial applications. Furthermore, efforts have been devoted to improve the stabilities of MOFs that are subjected to fragile collapse in aqueous environments expanding their use in water treatment. Advances made in MOF based material design have headed towards the use of MOF based aerogels/hydrogels, MOF derived carbons (MDCs), hydrophobic MOFs and magnetic framework composites (MFCs) to remediate water from contaminants and for the separation of oils from water. This review is intended to highlight some of the recent trends followed in MOF based material engineering towards effective water regeneration.

Evaluation of a hybrid process of magnetic ion-exchange resin treatment followed by ozonation in secondary effluent organic matter removal

The presence of effluent organic matter (EfOM) and organic micro-pollutants (OMPs) in secondary effluent is receiving increasing concern due to their potential impacts on the aquatic environment and human health. In this study, the removal characteristics of EfOM by magnetic ion-exchange resin (MIEX), ozonation, and the hybrid process of MIEX followed by ozonation (M + O) were compared by measuring the bulk organic indicators (BOIs), OMPs, bio-toxicity, and fluorescence. Furthermore, the desorption characteristics of MIEX were comprehensively studied. Ozonation could reduce the OMPs, total fluorescence (TF), genotoxicity, and oestrogenic activity more effectively than MIEX, with reductions of 80.3%, 97.8%, 98.9%, and 94.6%, respectively. The M + O process was capable of removing more EfOM than the individual MIEX or ozonation processes and could reduce the genotoxicity and oestrogenic activity to the detection limit. By implementing MIEX as a pre-treatment, the generation of ammonia-nitrogen and nitrate-nitrogen was effectively reduced in the subsequent ozonation process as MIEX adsorbed organic nitrogen and nitrite-nitrogen. The different regenerants influenced the OMP desorption performance of MIEX by changing the desorption mechanisms, and NaCl + NaOH was the best regenerant due to its high total OMP desorption efficiency. Parallel factor analysis coupled with self-organising maps further explained the differences in fluorescence desorption due to the addition of NaOH to the regenerated solution. Pearson correlation analysis indicated the potential of using spectroscopic indicators, such as ultraviolet absorbance and TF, to assess the evolution of OMPs and bio-toxicity during the M + O and MIEX desorption processes.

Polyhedral cobalt oxide supported Pt nanoparticles with enhanced performance for toluene catalytic oxidation

Polyhedral CoO_x was synthesized by calcination of Co-based metal-organic framework ZIF-67 and highly dispersed Pt nanoparticles were successfully loaded on CoO_x. The catalytic results showed that Pt_nano/CoO_x had the best activity and stability. As compared with conventional Co₃O₄, polyhedral CoO_x showed more excellent catalytic oxidation performance of toluene, which was related to enhanced oxygen mobility, defective structure and rich active oxygen species provided by Polyhedral CoO_x. Moreover, Pt-CoO_x metal-support interaction enhanced the dispersion of Pt species and showed more Pt⁰ ratio. It was reasonable that the gaseous O₂ can be activated directly or moved into the catalyst's surface to form oxygen cycle.

Enhanced photocatalytic degradation of gaseous toluene and liquidus tetracycline by anatase/rutile titanium dioxide with heterophase junction derived from materials of Institut Lavoisier-125(Ti): Degradation pathway and mechanism studies

Anatase/rutile titanium dioxide (TiO₂) with heterophase junction and large Brunauer-Emmett-Teller (BET) specific surface area (50.1 m² g^-1) is successfully synthesized by calcinating Materials of Institut Lavoisier-125(Ti) (MIL-125(Ti)) with 30% O₂/Ar at the temperature of 600 °C (M-O-600). Several techniques are used to examine the physicochemical, photoelectrochemical and optical properties of samples, and their photocatalytic performances are evaluated by photodegradation of gaseous toluene and liquidus tetracycline (TC) under visible light illumination. It is found that the calcination temperature has significant influence on the crystal structure and physicochemical parameters of TiO₂. The weight fractions of rutile and anatase TiO₂ of M-O-600 are approximately 0.7 and 0.3, which displays outstanding photocatalytic activity. Through the construction of heterophase junction, M-O-600 has better oxygen adsorption and higher density of localized states, which effectively promotes the generation of superoxide radical (·O₂^-) and hydroxyl radical (·OH) species. In-situ infrared spectra indicate that toluene is oxidized to benzyl alcohol, benzaldehyde and benzoic acid in turn and then oxidized to formic acid and acetic acid before eventually degraded into H₂O and CO₂. Gas chromatography-mass spectrometry (GC-MS) is also used to further investigate the degradation pathway of toluene. Degradation pathway and mechanism of TC are studied by liquid chromatography-tandem mass spectrometry (LC-MS). Moreover, three-dimensional excitation-emission matrix fluorescence spectroscopy (3D EEMs) and total organic carbon (TOC) show that TC can be effectively mineralized through a series of reactions by M-O-600 during photocatalysis.

In-situ fabrication of a spherical-shaped Zn-Al hydrotalcite with BiOCl and study on its enhanced photocatalytic mechanism for perfluorooctanoic acid removal performed with a response surface methodology

Perfluorooctanoic acid (PFOA), a widely used compound, is harmful to the environment and human health. In this study, a facile one pot solvothermal method of integrating BiOCl with Zn-Al hydrotalcite to form spherical-shaped BiOCl/Zn-Al hydrotalcite (B-BHZA) sample is reported. The characteristics and main factors affecting photocatalytic PFOA and photocatalytic mechanism of BiOCl/Zn-Al hydrotalcite (B-BHZA) are systematically investigated. It is found that spherical-shaped B-BHZA possesses abundant defects and a larger surface area of 64.4 m² g^-1. The factors affecting photocatalytic removal PFOA (e.g., time, pH, initial concentration and dosage) are investigated by modeling the 3D surface response. The removal rate of PFOA is over 90 % in 6 h under UV light at an optimal pH of 2, an initial concentration of 500 μg/L and a dose of dosage 0.5 g/L. The main mechanism occurs by photo-generated h⁺ oxidation and synergistic effects from the photocatalysis process. Though investigating the intermediates of PFOA degradation and F^-, a possibility was proposed that h⁺ initiated the rapidly decarboxylation of PFOA. The unstable perfluoroheptyl group is formatted and further conversed to short chain perfluorocarboxylic acid. This study provides a new insight for the preparation of highly efficient photocatalysts to the treatment of halogenated compounds in UV system.

Nanocarbon-Enhanced 2D Photoelectrodes: A New Paradigm in Photoelectrochemical Water Splitting

Solar-driven photoelectrochemical (PEC) water splitting systems are highly promising for converting solar energy into clean and sustainable chemical energy. In such PEC systems, an integrated photoelectrode incorporates a light harvester for absorbing solar energy, an interlayer for transporting photogenerated charge carriers, and a co-catalyst for triggering redox reactions. Thus, understanding the correlations between the intrinsic structural properties and functions of the photoelectrodes is crucial. Here we critically examine various 2D layered photoanodes/photocathodes, including graphitic carbon nitrides, transition metal dichalcogenides, layered double hydroxides, layered bismuth oxyhalide nanosheets, and MXenes, combined with advanced nanocarbons (carbon dots, carbon nanotubes, graphene, and graphdiyne) as co-catalysts to assemble integrated photoelectrodes for oxygen evolution/hydrogen evolution reactions. The fundamental principles of PEC water splitting and physicochemical properties of photoelectrodes and the associated catalytic reactions are analyzed. Elaborate strategies for the assembly of 2D photoelectrodes with nanocarbons to enhance the PEC performances are introduced. The mechanisms of interplay of 2D photoelectrodes and nanocarbon co-catalysts are further discussed. The challenges and opportunities in the field are identified to guide future research for maximizing the conversion efficiency of PEC water splitting.

Manganese-cerium composite oxide pyrolyzed from metal organic framework supporting palladium nanoparticles for efficient toluene oxidation

Manganese-cerium metal oxide with flocculent structure prepared via the pyrolysis of Mn/Ce-MOF and supported Pd were applied for the catalytic oxidation of toluene. The Pd/Mn3Ce2-300 catalyst could completely oxidize toluene at 190 °C, which presented excellent catalytic performance. Moreover, Pd/Mn3Ce2-300 possessed great reusability, stability and water resistance even under 10 vol% water vapors. A series of characterizations including X-ray diffraction (XRD), N₂ adsorption-desorption, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and H₂ temperature programmed reduction (H₂-TPR) were used to investigate the physicochemical properties of the samples. It was found that Pd/Mn3Ce2-300 possessed a better reduction ability at low temperature, more surface absorbed oxygen and surface Pd species, and a strong interaction between Pd and Mn3Ce2-300, resulting in great catalytic performance for toluene degradation.

Improving photocatalytic activity by construction of immobilized Z-scheme CdS/Au/TiO2 nanobelt photocatalyst for eliminating norfloxacin from water

To improve the photocatalytic activity of TiO₂ NBs under irradiation of solar light, an immobilized Z-scheme composite photocatalyst CdS/Au/TiO₂ NBs has been constructed. For the unique architectures, the TiO₂ NBs provide more absorption and reaction sites, the CdS nanoparticles enhance overall light harvesting, and Au acts as the electron transfer mediator, promoting the interfacial charge transfer and efficient separation of electrons and holes. The morphology, elements, crystal structure, optical and photoelectrochemical properties, and photocatalytic activity of CdS/Au/TiO₂ NBs were characterized. Results showed that CdS/Au/TiO₂ NBs possesses higher photocatalytic activity toward the degradation of antibiotic norfloxacin under irradiation of simulated sunlight, which is attributed to the synergetic interaction of increased light absorption and separation of photogenerated electrons and holes. Besides, the degradation of norfloxacin was promoted by HCO₃^-, but inhibited by NO₃^- and Cl^-. The radicals trapping experiments proved that superoxide radicals (O₂^-) was the dominating active species during the photocatalysis process. The photocatalytic degradation products of norfloxacin was analyzed, and nine intermediates were identified. Moreover, the photocatalytic degradation mechanism and photostability of CdS/Au/TiO₂ NBs were analyzed in detail. The matched energy levels and unique ternary Z-scheme design are the key for improved photocatalytic activity. The deactivation of CdS/Au/TiO₂ NBs after recycles mainly due to the release of CdS by photocorrosion and the loss of deposited Au.

Titanium oxide-coated titanium-loaded metal organic framework (MOF-Ti) nanoparticles show improved electrorheological performance

Uniform small-sized MOF-Ti nanoparticles were prepared by a one-step hydrothermal method, and then a 5-10 nm TiO2 shell was coated onto them by using the sol-gel method, and MOF-Ti/TiO2 with a specific surface area of 50.2 m2 g-1 was successfully prepared. The nanoparticles were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), nitrogen adsorption-desorption isotherms (BET), and X-ray photoelectron spectroscopy (XPS). The above-analyses have elaborated the experimental study of their morphology, elements, and energy of organic functional groups. At the same time, through the use of a high-voltage rotary rheometer to test their rheological properties, the analysis of shear stress, ER efficiency, shear viscosity, etc. was performed and their dielectric constant and dielectric loss were studied by using a broadband dielectric spectrometer. Finally, we found that MOF-Ti/TiO2 is a new core-shell nanocomposite particle with a small particle size and good electrorheological properties.

Boosting potassium-ion storage in large-diameter carbon nanotubes/MoP hybrid

Potassium-ion batteries (KIBs) as a substitute for lithium ion batteries have attracted tremendous attention in recent years thanks to the cost-effectiveness and abundance of potassium resources. However, the current lack of suitable electrode materials is a major obstacle against the practical application of KIBs. Hence, design and preparation of capable anode materials are critical for the development of KIBs. In this study, a promising electrode based on N, P-codoped large diameter hollow carbon nanotubes decorated with ultrasmall MoP nanoparticles (MoP@NP-HCNTs) were prepared. The hollow carbon nanotubes facilitate the rapid electron and ion transfer, and release the huge volume expansion during discharge/charge. The MoP@NP-HCNT electrode delivers high initial capacity of 485, 482 and 463 mAh g^-1 corresponding to 100, 200 and 1000 mA g^-1, respectively. The discharge specific capacity still maintains 300 mAh g^-1 at 100 mA g^-1 after over 80 cycles. It still shows ultralong cycling stability with a discharge capacity of 255 mAh g^-1 at a high current density of 1000 mA g^-1 after 120 cycles. This study opens up a new routine to develop high reversible capacity and promising electrode materials for KIBs.

Ultrasonic degradation of nitrosodipropylamine (NDPA) and nitrosodibutylamine (NDBA) in water

Nitrosodipropylamine (NDPA) and nitrosodibutylamine (NDBA), two highly toxics and carcinogenic disinfection by-products, cannot be efficiently removed by conventional water treatment processes, while the ultrasound treatment was developed as a promising alternative. In this work, nitrosodipropylamine (NDPA) and nitrosodibutylamine (NDBA) are degraded by ultrasound treatment. Greater than 99% of NDPA and NDBA mixing solution could be decomposed within 60 min at neutral pH under optimal ultrasound power and frequency settings of 100 W and 600 kHz, respectively. Free radical reactions (OH•) played a significant role and the reaction sites were predominately at the bubble interface. The degradation of both NDPA and NDBA exhibited pseudo-first-order degradation kinetics, and the rate constant k_app was influenced by a number of factors including ultrasonic frequency, power, initial concentration, initial pH, various anions and cations frequently present in drinking water, hydroxyl radical scavengers, and water matrices, especially the promoting effect of various anions and cations and water matrices. The results of this study suggest the potential for ultrasound treatment as a method for removing NAms from water.

Modulator-free approach towards missing-cluster defect formation in Zr-based UiO-66

By rigorous control of water, missing-cluster defects in Zr-based UiO-66 were generated to a remarkable extent without the need of acidic modulators. The presence of missing-cluster defects created hierarchical pore structures, which had a profound effect on the catalytic performance.

A novel cellulose hydrogel coating with nanoscale Fe0 for Cr(VI) adsorption and reduction

A novel cellulose hydrogel coating nanoscale Fe⁰ (CH@nFe⁰) was synthesized and utilized to improve the dispersibility and oxidation resistance of nFe⁰. The composition and structure of CH@nFe⁰ were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) before and after its reaction with Cr(VI). The performance of CH@nFe⁰ in the removal of Cr(VI) was evaluated through a comparative experiment between nFe⁰ and CH. The influence of the initial concentration of Cr(VI), temperature, dosage, and the initial pH of the solution were also evaluated in this reaction system. The results showed that CH@nFe⁰ allowed a higher Cr(VI) removal rate compared to nFe⁰ and CH. This might have derived from an enhanced reduction and adsorption of Cr(VI) by CH. Meanwhile, the network structure of the cellulose hydrogel served as a mass-transfer channel between Cr(VI) and nFe⁰. In addition, the increase of the initial solution pH minimized the removal of Cr(VI). This mechanism revealed that CH coating resulted in an enhancement of the adsorption capability and reducibility of CH@nFe⁰ with respect to Cr(VI). The CH@nFe⁰ composite is characterized by an advantageous mesoporous network structure and functional groups of amide and carboxylic acid, which provide additional active sites and promote mass transfer. This new three-dimensional (3-D) cellulose hydrogel coating containing nFe⁰ can be effectively used for the removal of Cr(VI) ions from aquatic environments.

Three-dimensionally macroporous MnZrOx catalysts for propane combustion: Synergistic structure and doping effects on physicochemical and catalytic properties

Three-dimensionally macroporous (3DM) MnZrO_x catalysts were fabricated to reveal the structure and Zr-doping effects on both physicochemical properties and propane combustion behaviors. The increasing addition of zirconium is favorable for the formation of 3DM structure and amorphous Mn-Zr solid solution, leading to tunable physicochemical properties. The significant activity improvement after zirconium addition was originally attributable to the superior redox ability, higher oxygen mobility and more abundant oxygen vacancy. The excellent catalytic activity, cycling stability and water resistant ability over 3DM Mn_0.6Zr_0.4O_x make it a promising material for hydrocarbons elimination. The comparative TPSR, in situ DRIFTs and kinetics study over 3DM and bulk catalysts emphasize the advantageous function of 3DM architecture on promoting propane adsorption, oxidation and lattice oxygen mobility.